Designing integrated circuits in radiation environments such as the High Luminosity LHC (HL-LHC) is challenging. Integrated circuits will be exposed to radiation-induced Single Event Effects (SEE). In deep sub-micron technology devices, the impact of SEEs can be mitigated by triple modular redundancy. The triplication of the most sensitive data is used to recover most of the data corruption induced by interacting particles. One type of SEE, called single event upset (SEU), is studied in this paper. The SEU cross-section and the performance of the triplication are estimated using an ASIC prototype exposed to a beam of protons. The SEU cross-section is measured, and a systematic difference between $1\rightarrow{0}$ and $0\rightarrow{1}$ bit flip rates is observed. The efficiency of the mitigation method is investigated.
A Starry Byte -- proton beam measurements of single event upsets and other radiation effects in ABCStar ASIC Versions 0 and 1 for the ITk strip tracker
Single event effects in the HCCStar ASICs for ITk strip upgrade
Tsinghua University(清华大学);Institute of High Energy Physics, Chinese Academy of Sciences(中国科学院高能物理研究所);Carleton University(卡尔顿大学);STFC Rutherford Appleton Laboratory(英国科学与技术设施委员会鲁瑟福阿普尔顿实验室);Spallation Neutron Source Science Center(散裂中子源科学中心);CERN(欧洲核子研究中心);University of Pennsylvania(宾夕法尼亚大学);State Key Laboratory of Particle Detection and Electronics(粒子探测与电子学国家重点实验室);University College London(伦敦大学学院)
Test beam performance of a CBC3-based mini-module for the Phase-2 CMS Outer Tracker before and after neutron irradiation
欧洲核子研究中心的大型强子对撞机(LHC)将进行重大升级,将瞬时光度提高到5-7.5 $\times10^{34}$ cm $^{-2}$ s $^{-1}$。这一大型强子对撞机的高亮度升级(HL-LHC)将在13-14 TeV的质心能量下提供总共3000-4000 fb的$^{-1}$质子-质子碰撞。为了应对这些具有挑战性的环境条件,CMS实验的条带跟踪器将使用具有两个紧密间隔的硅传感器的模块进行升级,以提供信息,包括1级触发选择中的跟踪。本文介绍了性能,在测试束实验中,第一个原型模块的基础上的最终版本的CMS二进制芯片前端ASIC之前和之后的模块被中子照射。结果表明,原型模块满足要求,提供有效的跟踪信息,在被照射的总通量相比,通过实验的寿命预期。