Atomic structure, electronic structure and optical absorption of inorganic perovskite compounds Cs2SnI6-nXn (X=F, Cl, Br; n= 0~6): A first-principles study
As a possible alternative to organic-inorganic hybrid perovskite halide, inorganic Cs2SnI6 has drawn more and more research attention recently. In order to find more Cs2SnI6 derivatives as the potential solar cell absorber materials, I- ions in Cs2SnI6 are replaced by other halogen ions and forms the Cs2SnI6-nXn (X=F, Cl, Br; n=1~6) compounds, whose atomic structures, electronic structures and optical absorption are investigated by first principles calculation. When the alloying level n increases, the mean lattice constants, the weighted Sn-X and Cs-X bond lengths all decreases linearly; the bond length of each Sn-X diminishes slightly inside the octahedral structure; Eg of Cs2SnI6-nXn increases nonlinearly. Eleven Cs2SnI6-nXn compounds have an Eg between 1.0 eV and 2.0 eV and so can be potentially used as the light absorption layer of solar cells. Their partial DOS demonstrate that as the alloying level n increases, I 5p orbital in VBM and CBM is gradually substituted by Br 4p, or Cl 3p, or F 2p orbital. The eleven Cs2SnI6-nXn alloys all have a direct bandgap although the lattice distortion induced by the alloyed X- ion.
Organic-inorganic halide perovskites have been intensively re-investigated due to their applications, yet the opto-electronic function of the organic cation remains unclear. Through organic-selective resonant Auger electron spectroscopy measurements on well-defined single crystal surfaces, we find evidence for electronic coupling in the unoccupied states between the organic and inorganic sub-lattices of the prototypical hybrid perovskite, which is contrary to the notion based on previous studies that the organic cation is electronically inert. The coupling is relevant for electron dynamics in …
In hybrid perovskites, the organic molecules and inorganic frameworks exhibit distinct static and dynamic characteristics. Their coupling will lead to unprecedented phenomena, which have attracted wide research interests. In this paper, we employed Deep Potential molecular dynamics (DPMD), a large-scale MD simulation scheme with DFT accuracy, to study $\mathrm{FA/MAPbI_3}$ hybrid perovskites. A spontaneous hybrid nano-domain behavior, namely multiple molecular rotation nano-domains embedded into a single $\mathrm{[PbI_6]^{4-}}$ octahedra rotation domain, was firstly discovered at low temperatu…
Instabilities relating to cooperative octahedral tilting is common in materials with perovskite structures, and in particular in the sub class of halide perovskites. In this work, the energetics of octahedral tilting in the inorganic metal halide perovskites CsPbI$_3$ and CsSnI$_3$ are investigated using first-principles density functional theory calculations. Several low energy paths between symmetry equivalent variants of the stable orthorhombic (\textit{Pnma}) perovskite variant are identified and investigated. The results are in favor of the presence of dynamic disorder in the octahedral t…
Single-atom catalysts (SACs) combine the best of two worlds by bridging heterogeneous and homogeneous catalysis. The superior catalytic properties of SACs, however, can hardly be exploited without a suitable substrate. Here, we explore the possibility of using hybrid organic-inorganic perovskites as supporting materials for single transition-metal atoms. By means of first-principles calculations, we predict that single Pt atoms can be incorporated into methylammonium lead iodide surfaces by replacing the methylammonium groups at the outermost layer. The iodide anions at the surface provide pot…
Organic-inorganic metal halide perovskites (HaPs) are intensively studied for their light-harvesting properties. Owing to the interplay between strong electron-electron interaction and spin-orbit coupling (SOC), their quantitative theoretical description is still a challenge as evidenced by the wide variety of results available in literature. Here, various methodologies for computing their electronic structure are evaluated, also accounting for SOC. More specific, the GW approach as well as variants of the hybrid functionals PBE0 and HSE are at the center of our investigations. For both functi…
Inorganic metal-halide cubic perovskite semiconductors have become more popular in industrial applications of photovoltaic and optoelectronic devices. Among various perovskites, lead-free materials are currently most explored due to their non-toxic effect on the environment. In this study, the structural, electronic, optical, and mechanical properties of lead-free cubic perovskite materials FrBX3 (B = Ge, Sn; X = Cl, Br, I) are investigated through first-principles density-functional theory (DFT) calculations. These materials are found to exhibit semiconducting behavior with direct bandgap ene…
Structural disorder is common in metal-halide perovskites and important for understanding the functional properties of these materials. First-principles methods can address structure variation on the atomistic scale, but they are often limited by the lack of structure-sampling schemes required to characterize the disorder. In this work, structural disorder in the benchmark inorganic halide perovskites CsPbI$_3^{}$ and CsPbBr$_3^{}$ is computationally studied in terms of the three octahedral-tilting angles. The consequent variation in energetics and properties are described by three-dimensional…
Doping organic metal-halide perovskites with cesium could be the best solution to stabilize highly-efficient perovskite solar cells. The understanding of the respective roles of the organic molecule, on one hand, and the inorganic lattice, on the other, is thus crucial in order to be able to optimize the physical properties of the mixed-cation structures. In particular, the study of the recombination mechanisms is thought to be one of the key challenges towards full comprehension of their working principles. Using molecular dynamics and frozen phonons, we evidence sub-picosecond anharmonic flu…
We develop a probabilistic machine learning model and use it to screen for new hybrid organic-inorganic perovskites (HOIPs) with targeted electronic band gap. The data set used for this work is highly diverse, containing multiple atomic structures for each of 192 chemically distinct HOIP formulas. Therefore, any property prediction on a given formula must be associated with an irreducible "uncertainty" that comes from its unknown atomic details. As a result, dozens of new HOIP formulas with band gap falling between 1.25 and 1.50 eV were identified and validated against suitable first-principle…
The acoustic phonons in the organic-inorganic lead halide perovskites have been reported to have anomalously short lifetimes over a large part of the Brillouin zone. The resulting shortened mean free paths of the phonons have been implicated as the origin of the low thermal conductivity. We apply neutron spectroscopy to show that the same acoustic phonon energy linewidth broadening (corresponding to shortened lifetimes) occurs in the fully inorganic CsPbBr$_{3}$ by comparing the results on the organic-inorganic CH$_{3}$NH$_{3}$PbCl$_{3}$. We investigate the critical dynamics near the three zon…
The structural, electrical, optical, and mechanical characteristics of the lead-free halide double perovskites Cs2NaTlX6 X = F, Cl, Br are calculated by utilizing PBE functional within generalized gradient approximation GGA under the context of density functional theory DFT.The structural properties such as lattice parameter, cell volume, total energy, bulk modulus, pressure derivative, and tolerance factor are computed at equilibrium.The electronic density of states reveals the semiconducting nature of the compound and the band structure exhibits the nature of the band gap to be direct.HSE06 …
We show that the decomposition of caesium lead halide perovskite nanocrystals under continuous X-ray illumination depends on the surface ligand. For oleic acid/oleylamine, we observe a fast decay accompanied by the formation of elemental lead and halogen. Upon surface functionalization with a metal porphyrin derivate, the decay is markedly slower and involves the disproportionation of lead to Pb0 and Pb3+. In both cases, the decomposition is preceded by a contraction of the atomic lattice, which appears to initiate the decay. We find that the metal porphyrin derivative induces a strong surface…
The unprecedented structural flexibility and diversity of inorganic frameworks of layered hybrid halide perovskites (LHHPs) rise up a wide range of useful optoelectronic properties thus predetermining the extraordinary high interest to this family of materials. Nevertheless, the influence of different types of distortions of their inorganic framework on key physical properties such as band gap has not yet been quantitatively identified. We provided a systematic study of the relationships between LHHPs' band gaps and six main structural descriptors of inorganic framework, including interlayer d…
FAPbI3, as a typical hybrid organic-inorganic perovskite, has attracted considerable interest due to its band gap suitable for visible light absorption and good thermal stability. A barrier to the use of FAPbI3 in commercial, stable devices is its unwanted black-to-yellow (non-perovskite to perovskite, commonly known as delta-to-alpha) phase transition at around 300 K. The intrinsic mechanisms of such phase transition are far from clear, being the detailed structural description for the alpha-phase still missing. By combined Density Functional Theory (DFT) calculations, lattice dynamics analys…
GW quasiparticle band gap of the hybrid organic-inorganic perovskite CH$_3$NH$_3$PbI$_3$: Effect of spin-orbit interaction, semicore electrons, and self-consistency
2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n' on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental …
Inorganic-organic perovskites semiconductors are becoming increasingly interesting due to their remarkable optical properties, such as a high photoluminescence quantum yield and the possibility to show optical gain in a broad range of wavelengths. We have here simulated microcavities that embed MaPBI3 and 2D hybrid organic inorganic perovskite semiconductors by sandwiching such active layers between periodic, aperiodic and disordered photonic structures. We have carefully considered the refractive index dispersion of all the materials employed, such silicon dioxide, titanium dioxide and the pe…
Density functional theory (DFT) based calculations have been conducted to draw a broad picture of pressure induced band structure evolution in various phases of organic and inorganic halide perovskite materials. Under a wide range of pressure applied, distinct band structure behaviors including magnitude change of band gap, direct-indirect/indirect-direct band gap transitions and CBM/VBM shifts, have been observed between organic and inorganic perovskites among different phases. Through atomic and electronic structure calculations, band gap narrowing/widening has been rationalized through crys…
Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are introducing new directions in the 2D materials landscape. The coexistence of ferroelectricity and spin-orbit interactions play a key role in their optoelectronic properties. We perform a detailed study on a recently synthesized ferroelectric 2D-HOIP, (AMP)PbI$_4$ (AMP = 4-aminomethyl-piperidinium). The calculated polarization and Rashba parameter are in excellent agreement with experimental values. We report a striking new effect, i.e., an extraordinarily large Rashba anisotropy that is tunable by ferroelectric polarization:…
This work is aimed to study mixed-cation (hybrid methyl ammonium plus inorganic cations) halide perovskites using first principles Density Functional Theory (DFT) formalism in order to find their potential applications in perovskite based photovoltaics. This is an addition to the two previous studies performed by the author on high-throughput screening of hybrid halide and inorganic halide perovskites. This work involves mixing certain amounts of the inorganic cation to the organic site (methyl ammonium) and study the electronic structure of the resultant. 63 perovskites have been simulated in…
We report inelastic light scattering from underdamped plasmons in azetidinium lead bromide (AzPbBr3). The plasmons are very strongly temperature dependent and serve as a soft mode for the semiconductor-insulator phase transition near TC » 150 K, demonstrating a continuous decrease in hole concentration np(T) by at least a factor of four and implying a nearly tricritical transition. The plasmon frequency and linewidth agree with independent measurements, and the impedance analysis reveals a frequency dependence (modelled by a constant phase element, CPE) that can be identified as due to electro…
Controlling grain orientations within polycrystalline all-inorganic halide perovskite solar cells can help increase conversion efficiencies toward their thermodynamic limits, however the forces governing texture formation are ambiguous. Using synchrotron X-ray diffraction, we report meso-structure formation within polycrystalline CsPbI2.85Br0.15 powders as they cool from a high-temperature cubic perovskite (α-phase). Tetragonal distortions (\b{eta}-phase) trigger preferential crystallographic alignment within polycrystalline ensembles, a feature we suggest is coordinated across multiple neighb…
Localized holes and delocalized electrons in photoexcited inorganic perovskites: Watching each atomic actor by picosecond X-ray absorption spectroscopy
