In this letter, we investigated the Rashba effect of the CsPbBr$_3$ bilayers under the external electric field (EEF), with the first-principles calculations. For the PbBr$_2$ terminated bilayer, we found that only electrons experience the Rashba splitting under EEF, while holes do not. Such n-type Rashba effect can be ascribed to the surface relaxation effect that reverse the position of the top valence bands. The n-type Rashba parameter can be tuned monotonically to the maximum of 0.88 eV $Å$ at EEF of 1.35 V/nm at which the sequence of top valence bands recover to the bulk style. During this process the p-type spins will not survive in this 2D CsPbBr$_3$, that indeed hints a new way for making advanced functional spintronic devices.
Organic-inorganic halide perovskite solar cells have recently attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. The reduction from three- to two-dimension (2D) promises an exciting opportunity to tune the electronic properties of organic-inorganic halide perovskites. Here, we propose first-principles density-functional theory based route to study the effect of reduced dimensionality, impurity doping, and heterostructure engineering on energy stability, band-gap and transport properties of 2D hybrid organic-inorganic halide perovskite…
Organic-inorganic coupling in the hybrid lead-halide perovskite is a central issue in rationalizing the outstanding photovoltaic performance of these emerging materials. Here we compare and contrast the evolution of structure and dynamics of the hybrid CH3NH3PbBr3 and the inorganic CsPbBr3 lead-halide perovskites with temperature, using Raman spectroscopy and single-crystal X-ray diffraction. Results reveal a stark contrast between their order-disorder transitions, abrupt for the hybrid whereas smooth for the inorganic perovskite. X-ray diffraction observes an intermediate incommensurate phase…
Instabilities relating to cooperative octahedral tilting is common in materials with perovskite structures, and in particular in the sub class of halide perovskites. In this work, the energetics of octahedral tilting in the inorganic metal halide perovskites CsPbI$_3$ and CsSnI$_3$ are investigated using first-principles density functional theory calculations. Several low energy paths between symmetry equivalent variants of the stable orthorhombic (\textit{Pnma}) perovskite variant are identified and investigated. The results are in favor of the presence of dynamic disorder in the octahedral t…
The zero-dimensional (0D) metal halides comprise periodically distributed and isolated metal-halide polyhedra, which act as the smallest inorganic quantum systems and can accommodate quasi-localized Frenkel excitons. These excitons exhibit unique photophysics including broadband photon emission, huge Stokes shift, and long decay lifetime. The polyhedra can have different symmetries due to the coordination degree of the metal ions. Little is known about how the polyhedron type affects the characteristics of the 0D metal halide crystals. We synthesize and comparatively study three novel kinds of…
Organometal halide perovskites are promising solar-cell materials for next-generation photovoltaic applications. The long carrier lifetime and diffusion length of these materials make them very attractive for use in light absorbers and carrier transporters. While these aspects of organometal halide perovskites have attracted the most attention, the consequences of the Rashba effect, driven by strong spin-orbit coupling, on the photovoltaic properties of these materials are largely unexplored. In this work, taking the electronic structure of methylammonium lead iodide as an example, we propose …
In a combined theoretical and experimental work, we investigate X-ray Absorption Near-Edge Structure (XANES) spectroscopy of the I $L_3$ and the Pb $M_5$ edges of the methylammonium lead iodide ($\textrm{MAPbI}_3$) hybrid inorganic-organic perovskite and its binary phase $\textrm{PbI}_2$. The absorption onsets are dominated by bound excitons with sizable binding energies of a few hundred meV and pronounced anisotropy. The spectra of both materials exhibit remarkable similarities, suggesting that the fingerprints of core excitations in $\textrm{MAPbI}_3$ are essentially given by its inorganic c…
Structural disorder is common in metal-halide perovskites and important for understanding the functional properties of these materials. First-principles methods can address structure variation on the atomistic scale, but they are often limited by the lack of structure-sampling schemes required to characterize the disorder. In this work, structural disorder in the benchmark inorganic halide perovskites CsPbI$_3^{}$ and CsPbBr$_3^{}$ is computationally studied in terms of the three octahedral-tilting angles. The consequent variation in energetics and properties are described by three-dimensional…
We show that the decomposition of caesium lead halide perovskite nanocrystals under continuous X-ray illumination depends on the surface ligand. For oleic acid/oleylamine, we observe a fast decay accompanied by the formation of elemental lead and halogen. Upon surface functionalization with a metal porphyrin derivate, the decay is markedly slower and involves the disproportionation of lead to Pb0 and Pb3+. In both cases, the decomposition is preceded by a contraction of the atomic lattice, which appears to initiate the decay. We find that the metal porphyrin derivative induces a strong surface…
The structural, electrical, optical, and mechanical characteristics of the lead-free halide double perovskites Cs2NaTlX6 X = F, Cl, Br are calculated by utilizing PBE functional within generalized gradient approximation GGA under the context of density functional theory DFT.The structural properties such as lattice parameter, cell volume, total energy, bulk modulus, pressure derivative, and tolerance factor are computed at equilibrium.The electronic density of states reveals the semiconducting nature of the compound and the band structure exhibits the nature of the band gap to be direct.HSE06 …
The acoustic phonons in the organic-inorganic lead halide perovskites have been reported to have anomalously short lifetimes over a large part of the Brillouin zone. The resulting shortened mean free paths of the phonons have been implicated as the origin of the low thermal conductivity. We apply neutron spectroscopy to show that the same acoustic phonon energy linewidth broadening (corresponding to shortened lifetimes) occurs in the fully inorganic CsPbBr$_{3}$ by comparing the results on the organic-inorganic CH$_{3}$NH$_{3}$PbCl$_{3}$. We investigate the critical dynamics near the three zon…
We present an experimental and theoretical viewpoint on the electronic carrier mobilities of typical hybrid organic-inorganic perovskites (HOIPs). While these mobilities are often quoted as high, a review of them shows that although otherwise the semiconducting properties of HOIPs are impressively good, mobilities of HOIPs used in most solar cells are actually not that high. This is especially apparent if they are compared to those of inorganic semiconductors used in other high efficiency solar cells. We critically examine possible causes and focus on electron-lattice coupling mechanisms that …
Hybrid organic-inorganic halide perovskites with the prototype material of CH$_{3}$NH$_{3}$PbI$_{3}$ have recently attracted intense interest as low-cost and high-performance photovoltaic absorbers. Despite the high power conversion efficiency exceeding 20% achieved by their solar cells, two key issues -- the poor device stabilities associated with their intrinsic material instability and the toxicity due to water soluble Pb$^{2+}$ -- need to be resolved before large-scale commercialization. Here, we address these issues by exploiting the strategy of cation-transmutation to design stable inorg…
Organic-inorganic metal halide perovskites (HaPs) are intensively studied for their light-harvesting properties. Owing to the interplay between strong electron-electron interaction and spin-orbit coupling (SOC), their quantitative theoretical description is still a challenge as evidenced by the wide variety of results available in literature. Here, various methodologies for computing their electronic structure are evaluated, also accounting for SOC. More specific, the GW approach as well as variants of the hybrid functionals PBE0 and HSE are at the center of our investigations. For both functi…
Based on first-principles calculations, we show that chemically active metal ns2 lone pairs play an important role in exciton relaxation and dissociation in low-dimensional halide perovskites. We studied excited-state properties of several recently discovered luminescent all-inorganic and hybrid organic-inorganic zero-dimensional (0D) Sn and Pb halides. The results show that, despite the similarity in ground-state electronic structure between Sn and Pb halide perovskites, the chemically more active Sn2+ lone pair leads to stronger excited-state structural distortion and larger Stokes shift in …
The unprecedented structural flexibility and diversity of inorganic frameworks of layered hybrid halide perovskites (LHHPs) rise up a wide range of useful optoelectronic properties thus predetermining the extraordinary high interest to this family of materials. Nevertheless, the influence of different types of distortions of their inorganic framework on key physical properties such as band gap has not yet been quantitatively identified. We provided a systematic study of the relationships between LHHPs' band gaps and six main structural descriptors of inorganic framework, including interlayer d…
Perovskite solar cells have shown remarkable efficiencies beyond 22%, through organic and inorganic cation alloying. However, the role of alkali-metal cations is not well-understood. By using synchrotron-based nano-X-ray fluorescence and complementary measurements, we show that when adding RbI and/or CsI the halide distribution becomes homogenous. This homogenization translates into long-lived charge carrier decays, spatially homogenous carrier dynamics visualized by ultrafast microscopy, as well as improved photovoltaic device performance. We find that Rb and K phase-segregate in highly conce…
Using first principles density functional theory calculations, we show how Rashba-type energy band splitting in the hybrid organic-inorganic halide perovskites APbX$_3$ (A=CH$_3$NH$_3^+$, CH(NH$_2$)$_2^+$, Cs$^+$ and X=I, Br) can be tuned and enhanced with electric fields and anisotropic strain. In particular, we demonstrate that the magnitude of the Rashba splitting of tetragonal (CH$_3$NH$_3$)PbI$_3$ grows with increasing macroscopic alignment of the organic cations and electric polarization, indicating appreciable tunability with experimentally-feasible applied fields, even at room temperat…
Roadmap for electronic structure, anharmonicity, and electron-phonon calculations in locally disordered inorganic and hybrid halide perovskites
Univ Rennes, INSA Rennes, CNRS, Institut FOTON - UMR 6082（雷恩大学，雷恩国立应用科学学院，法国国家科学研究中心，FOTON研究所）；Computation-based Science and Technology Research Center, The Cyprus Institute（塞浦路斯研究院计算科学与技术研究中心）；Univ Rennes, ENSCR, INSA Rennes, CNRS, ISCR - UMR 6226（雷恩大学，雷恩高等师范学院，雷恩国立应用科学学院，法国国家科学研究中心，ISCR研究所）；Oden Institute for Computational Engineering and Sciences, The University of Texas at Austin（德克萨斯大学奥斯汀分校奥登计算工程与科学学院）；Department of Physics, The University of Texas at Austin（德克萨斯大学奥斯汀分校物理系）
Doping organic metal-halide perovskites with cesium could be the best solution to stabilize highly-efficient perovskite solar cells. The understanding of the respective roles of the organic molecule, on one hand, and the inorganic lattice, on the other, is thus crucial in order to be able to optimize the physical properties of the mixed-cation structures. In particular, the study of the recombination mechanisms is thought to be one of the key challenges towards full comprehension of their working principles. Using molecular dynamics and frozen phonons, we evidence sub-picosecond anharmonic flu…
The local crystal structures of many perovskite-structured materials deviate from the average space group symmetry. We demonstrate, from lattice-dynamics calculations based on quantum chemical force constants, that all the caesium-lead and caesium-tin halide perovskites exhibit vibrational instabilities associated with octahedral titling in their high-temperature cubic phase. Anharmonic double-well potentials are found for zone-boundary phonon modes in all compounds with barriers ranging from 108 to 512 meV. The well depth is correlated with the tolerance factor and the chemistry of the compos…
This work is aimed to study mixed-cation (hybrid methyl ammonium plus inorganic cations) halide perovskites using first principles Density Functional Theory (DFT) formalism in order to find their potential applications in perovskite based photovoltaics. This is an addition to the two previous studies performed by the author on high-throughput screening of hybrid halide and inorganic halide perovskites. This work involves mixing certain amounts of the inorganic cation to the organic site (methyl ammonium) and study the electronic structure of the resultant. 63 perovskites have been simulated in…
Perovskite solar cells with record power conversion efficiency are fabricated by alloying both hybrid and fully inorganic compounds. While the basic electronic properties of the hybrid perovskites are now well understood, key electronic parameters for solar cell performance, such as the exciton binding energy of fully inorganic perovskites, are still unknown. By performing magneto transmission measurements, we determine with high accuracy the exciton binding energy and reduced mass of fully inorganic CsPbX$_3$ perovskites (X=I, Br, and an alloy of these). The well behaved (continuous) evolutio…
Two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs) are introducing new directions in the 2D materials landscape. The coexistence of ferroelectricity and spin-orbit interactions play a key role in their optoelectronic properties. We perform a detailed study on a recently synthesized ferroelectric 2D-HOIP, (AMP)PbI$_4$ (AMP = 4-aminomethyl-piperidinium). The calculated polarization and Rashba parameter are in excellent agreement with experimental values. We report a striking new effect, i.e., an extraordinarily large Rashba anisotropy that is tunable by ferroelectric polarization:…
Organic-inorganic hybrid halide perovskites, in which the A cations of an ABX$_3$ perovskite are replaced by organic cations, may be used for photovoltaic and solar thermoelectric applications. In this contribution, we systematically study three lead-free hybrid perovskites, i.e., methylammonium tin iodide CH$_3$NH$_3$SnI$_3$, ammonium tin iodide NH$_4$SnI$_3$, and formamidnium tin iodide HC(NH$_2$)$_2$SnI$_3$, by first-principles calculations. We find that in addition to the commonly known motif in which the corner-shared SnI$_6$ octahedra form a three-dimensional network, these materials may…
2D organic-inorganic hybrid perovskites (2DHPs) consist of alternating anionic metal-halide and cationic organic layers. They have widely tunable structural and optical properties. We review the role of the organic cation in defining the structural and optical properties of 2DHPs through example lead iodide 2DHPs. Even though excitons reside in the metal halide layers, the organic and inorganic frameworks cannot be separated-they must be considered as a single unit to fully understand the photophysics of 2DHPs. We correlate cation-induced distortion and disorder in the inorganic lattice with t…
Inorganic-organic lead halide perovskites, particularly methylammonium lead halide (MAPbI$_3$) perovskite, is perceived to be a promising material for optoelectronics and spintronics. However, lead toxicity and instability under air and moisture restrict its practical uses. Hence, it is essential to reduce lead extent by substituting appropriate alternatives. Here, we substitute Sn and Ge in cubic MAPbI$_3$ and compare various properties of hybrid perovskites by employing state-of-the-art first-principles-based methodologies, viz., density functional theory (DFT) with semilocal and hybrid func…
Density functional theory (DFT) based calculations have been conducted to draw a broad picture of pressure induced band structure evolution in various phases of organic and inorganic halide perovskite materials. Under a wide range of pressure applied, distinct band structure behaviors including magnitude change of band gap, direct-indirect/indirect-direct band gap transitions and CBM/VBM shifts, have been observed between organic and inorganic perovskites among different phases. Through atomic and electronic structure calculations, band gap narrowing/widening has been rationalized through crys…
Organic-inorganic halide perovskite solar cells have attracted much attention due to their low-cost fabrication, flexibility, and high-power conversion efficiency. More recent efforts show that the reduction from three- to two-dimensions (2D) of organic-inorganic halide perovskites promises an exciting opportunity to tune their electronic properties. Here, we explore the effect of reduced dimensionality and heterostructure engineering on the intrinsic material properties, such as energy stability, bandgap and transport properties of 2D hybrid organic-inorganic halide perovskites using first-pr…
Organohalide perovskite with a variety of surface structures and morphologies have shown promising potential owing to the choice of the type of heterostructure dependent stability. We systematically investigate and discuss the impact of 2-dimensional molybdenum-disulphide (MoS2), molybdenum-diselenide (MoSe2), tungsten-disulphide (WS2), tungsten-diselenide (WSe2), boron- nitiride (BN) and graphene monolayers on band-gap and energy stability of organic-inorganic halide perovskites. We found that MAPbI3ML deposited on BN-ML shows room temperature stability (-25 meV~300K) with an optimal bandgap …
Inorganic halide perovskite \ce{Cs(Rb)PbI3} has attracted significant research interest in the application of light-absorbing material of perovskite solar cells (PSCs). Although there have been extensive studies on structural and electronic properties of inorganic halide perovskites, the investigation on their thermodynamic stability is lack. Thus, we investigate the effect of substituting Rb for Cs in \ce{CsPbI3} on the chemical decomposition and thermodynamic stability using first-principles thermodynamics. By calculating the formation energies of solid solutions \ce{Cs$_{1-x}$Rb$_x$PbI3} fr…
The strong spin-orbit interaction in the organic-inorganic perovskites tied to the incorporation of heavy elements (\textit{e.g.} Pb, I) makes these materials interesting for applications in spintronics. Due to a lack of inversion symmetry associated with distortions of the metal-halide octahedra, the Rashba effect (used \textit{e.g.} in spin field-effect transistors and spin filters) has been predicted to be much larger in these materials than in traditional III-V semiconductors such as GaAs, supported by the recent observation of a near record Rashba spin splitting in CH$_3$NH$_3$PbBr$_3$ us…
We have studied the prototype hybrid organic-inorganic perovskite CH3NH3PbI3 and its three close relatives, CH3NH3SnI3, CH3NH3PbCl3 and CsPbI3, using relativistic density function theory. The long-range van der Waals (vdW) interactions were incorporated into the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional using the Tkatchenko-Scheffler pairwise scheme. Our results reveal that hydrogen bonding, which is well described by the PBE functional, plays a decisive role for the structural parameters of these systems, including the position and orientation of the organic cation as well …
Mixed Organic Cation in Chiral Two-Dimensional Organic-Inorganic Hybrid Metal Halides: An ab-initio Study of Nonlinear Optical (NLO) Properties
Fujian Institute of Research on the Structure of Matter (FJIRSM), Chinese Academy of Sciences (CAS)（中国科学院福建物质结构研究所）；Anna University（安娜大学）；Sivas Cumhuriyet University（锡瓦斯恰姆别特大学）；CNR-SPIN（意大利国家研究委员会自旋电子学中心）
Controlling grain orientations within polycrystalline all-inorganic halide perovskite solar cells can help increase conversion efficiencies toward their thermodynamic limits, however the forces governing texture formation are ambiguous. Using synchrotron X-ray diffraction, we report meso-structure formation within polycrystalline CsPbI2.85Br0.15 powders as they cool from a high-temperature cubic perovskite (α-phase). Tetragonal distortions (\b{eta}-phase) trigger preferential crystallographic alignment within polycrystalline ensembles, a feature we suggest is coordinated across multiple neighb…
Ruddelsden-Popper halide perovskites are highly versatile quasi-two-dimensional energy materials with a wide range of tunable optoelectronic properties. Here we use the all-inorganic Cs$_{n+1}$Pb$_n$X$_{3n+1}$ Ruddelsden-Popper perovskites with X=I, Br, and Cl to systematically model the effect of octahedral tilting distortions on the energy landscape, band gaps, macroscopic polarization, and the emergence of Rashba-/Dresselhaus splitting in these materials. We construct all unique $n=1$ and $n=2$ structures following from octahedral tilts and use first-principles density functional theory to …
Organic-inorganic hybrid halide perovskites have ignited tremendous interests for photovoltaic applications. However, their nonlinear optical response has not been studied although many of these structures lack the centrosymmetry and exhibit ferroelectricity. In this work, we employ our developed large-scale parallel, first-principles simulation tool (ArchNLO) to explore second-order nonlinear optical properties of a typical family of organic-inorganic hybrid halide perovskites, CH3NH3MX3 (M= Ge, Sn, Pb; X=Cl, Br, I). We find that these hybrid perovskites exhibit second harmonic generation and…
Halide perovskites have recently gained widespread attention for their exceptional optoelectronic properties which have been illuminated by extensive spectroscopic investigations. In this article, nanophotonic surface-engineering using soft-lithography has been used to reproduce nanostructures with enhanced functionalities. A non-invasive optical technique based on Raman and photolumines-cence (PL) spectroscopy is employed to investigate the interactive effect of the thermal and optical behaviour in surface-patterned hybrid organic-inorganic halide perovskite thin films. The thermophys-ical pr…
Single-orbital tight-binding model for chiral one-dimensional hybrid organic-inorganic lead halide perovskites
Waseda Institute for Advanced Study, Waseda University（早稻田大学先进研究院）；Institute for Materials Research, Tohoku University（东北大学物质材料研究所学）；Department of Chemistry and Biochemistry, School of Advanced Science and Engineering, Waseda University（早稻田大学理工学术院化学·生物化学系）；Department of Applied Physics, Tokyo University of Science（东京理科大学应用物理系）
The potential of lead-halide perovskites for realistic applications is currently hindered by their limited long-term stability under functional activation. While the role of lattice flexibility in the thermal response of perovskites has become increasingly evident, the description of thermally-induced distortions is still unclear. In this work, we provide a unified picture of thermal activation in CsPbBr3 across length scales, showing that lattice symmetry does not increase at high temperatures. We combine temperature-dependent XRD, Br K-edge XANES, ab initio MD simulations, and calculations o…
Metal halide perovskites exhibit a materials physics that is distinct from traditional inorganic and organic semiconductors. While materials such as CH3NH3PbI3 are non-magnetic, the presence of heavy elements (Pb and I) in a non-centrosymmetric crystal environment result in a significant spin-splitting of the frontier electronic bands through the Rashba-Dresselhaus effect. We show, from a combination of \textit{ab initio} molecular dynamics, density-functional theory, and relativistic quasi-particle \textit{GW} theory, that the nature (magnitude and orientation) of the band splitting depends o…
The electronic structure and energetic stability of A$_2$BX$_6$ halide compounds with the cubic and tetragonal variants of the perovskite-derived K$_2$PtCl$_6$ prototype structure are investigated computationally within the frameworks of density-functional-theory (DFT) and hybrid (HSE06) functionals. The HSE06 calculations are undertaken for seven known A$_2$BX$_6$ compounds with A = K, Rb and Cs, and B = Sn, Pd, Pt, Te, and X = I. Trends in band gaps and energetic stability are identified, which are explored further employing DFT calculations over a larger range of chemistries, characterized …
The facile synthesis and electronic properties of two-dimensional hybrid organic-inorganic perovskites (2D HOIPs) make these self-assembled systems an important class of energy materials. The basic building blocks of these materials include inorganic lattice frameworks that often consist of lead-halide octahedra and organic molecules possessing ammonium functional groups. Understanding the coupling between the inorganic and organic layers is key to unraveling how the electronic properties of 2D HOIPs relate to their structures. In this work, we leverage Raman spectroscopy measurements and firs…
2D Ruddlesden Popper perovskites have been extensively studied for their exceptional optical and electronic characteristics while only a few studies have shed light on their mechanical properties. The existing literature mainly discusses the mechanical strength of single crystal perovskites, however a systematic study towards structure tunability of 2D perovskite thin films is still missing. In this study, we report the effect of number of inorganic layers `n' on elastic modulus of Butylammonium based 2D, quasi-2D perovskites and 3D perovskite using nanoindentation technique. The experimental …
Ultrafast vibrational dynamics of inorganic-organic hybrid lead halide perovskite CH3NH3PbI$ in the room-temperature tetragonal phase is investigated under moderate photoexcitation slightly below the band gap. Time-resolved optical Kerr effect signal exhibits periodic modulations due to the libration and twisting of the methylammonium molecule at 4 and 8 THz, in addition to the inorganic sublattice deformation at 1.2 THz. These oscillations are heavily damped, and their frequencies exhibit blueshifts with increasing pump density, contrary to the expectation from conventional laser heating. Our…
The extended carrier lifetime in hybrid halide perovskites was attributed to a quasi-indirect band gap that arises due to Rashba splitting in both conduction and valence band edges. In this paper, we present results for an effective relativistic band structure of (CH3NH3)PbI3 with the focus on the dispersion of electronic states near the band edges of (CH3NH3)PbI3 affected by thermal structural fluctuations. We establish a relation between the magnitude of Rashba splitting and a deviation of Pb-atom from its centrosymmetric site position in the PbI6 octahedron. For the splitting energy to reac…
Metal halide perovskites (MHPs) are nowadays one of the most studied semiconductors due to their exceptional performance as active layers in solar cells. Although MHPs are excellent solid-state semiconductors, they are also ionic compounds, where ion migration plays a decisive role in their formation, their photovoltaic performance and their long-term stability. Given the above-mentioned complexity, molecular dynamics simulations based on classical force fields are especially suited to study MHP properties, such as lattice dynamics and ion migration. In particular, the possibility to model mix…
Recently, replacing or mixing organic molecules in the hybrid halide perovskites with the inorganic Cs or Rb cations has been reported to increase the material stability with the comparable solar cell performance. In this work, we systematically investigate the electronic and optical properties of all-inorganic alkali iodide perovskites Rb1-xCsxPbI3 using the first-principles virtual crystal approximation calculations. Our calculations show that as increasing the Cs content x, lattice constants, band gaps, exciton binding energies, and effective masses of charge carriers decrease following the…
We have investigated nonlinear refraction in all-inorganic halide perovskites, the CsPbBr$_3$ and CsPbBr$_{1.5}$I$_{1.5}$ nanosheet and quantum dot colloids in toluene, by a novel beam deflection technique using near-resonant continuous wave lasers. The nonlinear refraction and its time-evolution measured here have originated from thermal lensing effect. Nonlinear behaviour of heat transport in terms of intensity dependent thermal diffusion rate has been observed. Effects of convective heat flow have been measured at high intensities. Quantum dots have higher nonlinear refraction as compared t…
The organic-inorganic lead halide perovskites are composed of organic molecules imbedded in an inorganic framework. The compounds with general formula CH$_{3}$NH$_{3}$PbX$_{3}$ (MAPbX$_{2}$) display large photovoltaic efficiencies for halogens $X$=Cl, Br, and I in a wide variety of sample geometries and preparation methods. The organic cation and inorganic framework are bound by hydrogen bonds that tether the molecules to the halide anions, and this has been suggested to be important to the optoelectronic properties. We have studied the effects of this bonding using time-of-flight neutron spec…
Inorganic Halide perovskites (HP's) of the CsPbX3 (X=I, Br, Cl) type have reached prominence in photovoltaic solar cell efficiencies. Peculiarly, they have shown, however, an asymmetry in their ability to be doped by holes rather than by electrons. Indeed, both structural defect-induced doping as well as extrinsic impurity-induced doping strangely result in a unipolar doping (dominantly p-type) with low free carriers concentration. This raises the question whether such doping limitations presents just a temporary setback due to insufficient optimization of the doping process, or perhaps this r…
We present a many-body calculation of the band structure and optical spectrum of the layered hybrid organic-inorganic halide perovskites in the Ruddlesden-Popper phase with the general formula A$^{'}_{2}$A$_{n-1}$M$_{n}$X$_{3n+1}$, focusing specifically on the lead iodide family. We calculate the mean-field band structure with spin-orbit coupling, quasiparticle corrections within the GW approximation, and optical spectra using the Bethe-Salpeter equation. The model is parameterized by first-principles calculations and classical electrostatic screening, enabling an accurate but cost-effective s…
Despite the imperative importance in solar-cell efficiency, the intriguing phenomena at the interface between perovskite solar-cell and adjacent carrier transfer layers are hardly uncovered. Here we show that PbI$_2$/AI-terminated lead-iodide-perovskite (APbI$_3$; A=Cs$^+$/ methylammonium(MA)) interfaced with the charge transport medium of graphene or TiO2 exhibits the sizable/robust Rashba-Dresselhaus (RD) effect using density-functional-theory and ab initio molecular dynamics (AIMD) simulations above cubic-phase temperature. At the PbI$_2$-terminated graphene/CsPbI3(001) interface, ferroelec…
