In a search for Lead-free materials that could be used as alternatives to the hybrid perovskites,(MA)PbX3, in photovoltaic applications, we have discovered a hybrid double perovskite, (MA)2KBiCl6, which shows striking similarities to the lead analogues. Spectroscopic measurements and nanoindentation studies are combined with density functional calculations to reveal the properties of this interesting system.
Organic-inorganic halide perovskites have been intensively re-investigated due to their applications, yet the opto-electronic function of the organic cation remains unclear. Through organic-selective resonant Auger electron spectroscopy measurements on well-defined single crystal surfaces, we find evidence for electronic coupling in the unoccupied states between the organic and inorganic sub-lattices of the prototypical hybrid perovskite, which is contrary to the notion based on previous studies that the organic cation is electronically inert. The coupling is relevant for electron dynamics in …
Organic-inorganic hybrid perovskites such as methylammonium lead iodide (CH3NH3PbI3) are game-changing semiconductors for solar cells and light-emitting devices owing to their exceptionally long carrier lifetime and diffusion length. Determining whether the large dipole moment of the organic cation and dynamic disorder benefit the optoelectronic properties of CH3NH3PbI3 has been an outstanding challenge. Herein, via transient absorption measurements employing an infrared pump pulse tuned to a methylammonium vibration, we observe slow, nanosecond-long thermal dissipation from the selectively ex…
Why Do Eight Units of Methylammonium Enclose PbI6 Octahedron in Large-Scale Crystals of Methylammonium Lead Iodide Perovskite Solar Cell? An Answer from First-Principles Study
For opto-electronic and photo-voltaic applications of perovskites, it is essential to know the optical properties and intrinsic losses of the used materials. A systematic microscopic analysis is presented for the example of methylammonium lead iodide where density functional theory is used to calculate the electronic band structure as well as the dipole and Coulomb matrix elements. These results serve as input for a many-body quantum approach used to compute the absorption, photoluminescence, and the optical and Auger losses for a wide range of application conditions. To illustrate the theory,…
Two seemingly similar crystal structures of the low-temperature (~100 K) MAPbX$_3$ (X=I,Br,Cl) perovskites, but with different relative Methylammonium (MA) ordering, have appeared as representatives of this orthorhombic phase. Distinguishing them by X-ray diffraction experiments is difficult and conventional first-principles based molecular-dynamics approaches are often too computationally intensive to be feasible. Therefore, to determine the thermodynamically stable structure, we use a recently introduced on-the-fly Machine-Learning Force Field method, which reduces the computation time from …
We show that the addition of 1 % (v/v) nitrobenzene within the perovskite formulation can be used as a method to improve the power conversion efficiency and reliability performance of methylammonium-free (CsFA) inverted perovskite solar cells. Addition of nitrobenzene increased PCE due to defect passivation and provides smoother films resulting in PVSCs with narrower PCE distribution. Moreover, the nitrobenzene additive methylammonium-free hybrid PVSCs exhibit prolonged lifetime compare to additive free PVSCs due to enhanced air and moisture degradation resistance.
Inorganic-organic lead halide perovskites, particularly methylammonium lead halide (MAPbI$_3$) perovskite, is perceived to be a promising material for optoelectronics and spintronics. However, lead toxicity and instability under air and moisture restrict its practical uses. Hence, it is essential to reduce lead extent by substituting appropriate alternatives. Here, we substitute Sn and Ge in cubic MAPbI$_3$ and compare various properties of hybrid perovskites by employing state-of-the-art first-principles-based methodologies, viz., density functional theory (DFT) with semilocal and hybrid func…
Methylammonium lead iodide, as related organometal halide perovskites, emerged recently as a particularly attractive material for photovoltaic applications. The origin of its appealing properties is sometimes assigned to its potential ferroelectric character, which remains however a topic of intense debate. Here, we rationalize from first-principles calculations how the spatial arrangement of methylammonium polar molecules is progressively constrained by the subtle interplay between their tendency to bond with the inorganic framework and the appearance of iodine octahedra rotations inherent to…
Optical Phonons in Methylammonium Lead Halide Perovskites and Implications for Charge Transport
卤化铅钙钛矿是一种很有前途的光电子材料。最近的报道表明，它们的力学和电子性能受到晶格振动的强烈影响。本文报道了CH $_{3}$ NH $_{3}$ Pb（I/Br/Cl）$_{3}$薄膜和单晶在室温下的远红外光谱测量和光谱的详细定量分析。我们发现所有三种卤化物钙钛矿的晶格振动的强加宽和非谐性，这表明在室温下的铅卤化物笼的动态无序。我们确定的横向和纵向光学声子的频率，并使用它们来计算，通过适当的模型，静态介电常数，极化子质量，电子-声子耦合常数，和上限的声子散射有限的载流子迁移率。在所用模型的限制内，我们可以将MAPbI $_{3}$单晶中室温载流子迁移率的上限设为200 $\,$ cm $^{2}$ V $^{-1}$ s $^{-1}$。我们的研究结果对于理解金属卤化物钙钛矿中的电荷传输过程和机械性能具有重要意义。
Hybrid perovskites with mixed organic cations such as methylammonium and formamidinium have attracted interest due to their improved stability and capability to tune their properties varying the composition. In this work we report on the local variation of the structural and electronic properties in mixed A-site cation MA/FA lead iodide perovskites FAXMA1-XPBI3 evaluated from static first-principles calculations in certain structures where the orientations of organic cations result from examining the energy landscape of some compositions. The cation replacement at the A-site to form the solid …
Single-atom catalysts (SACs) combine the best of two worlds by bridging heterogeneous and homogeneous catalysis. The superior catalytic properties of SACs, however, can hardly be exploited without a suitable substrate. Here, we explore the possibility of using hybrid organic-inorganic perovskites as supporting materials for single transition-metal atoms. By means of first-principles calculations, we predict that single Pt atoms can be incorporated into methylammonium lead iodide surfaces by replacing the methylammonium groups at the outermost layer. The iodide anions at the surface provide pot…
The hybrid halide perovskites MAPbI$_{3}$, MAPbI$_{2.94}$Cl$_{0.06}$, and MAPbCl$_{3}$ (MA - methylammonium) have been investigated using inelastic and quasielastic neutron scattering (QENS) with the aim of elucidating the impact of chloride substitution on the rotational dynamics of MA. In this context, we discuss the influence of the inelastic neutron scattering caused by low-energy phonons on the QENS resulting from the MA rotational dynamics in MAPbI$_{3-x}$Cl$_{x}$. Through a comparative temperature-dependent QENS investigation with different energy resolutions, which allow a wide Fourier…
Origin of the Temperature-Induced Gap Bowing of Formamidinium-Methylammonium Lead Iodide Perovskites: Role of Cationic Rattlers
Institut de Ciència de Materials de Barcelona, ICMAB-CSIC（巴塞罗那材料科学研究所）；University of Bath（巴斯大学）；University of Bristol（布里斯托大学）；Cardiff University（卡迪夫大学）；ICREA（加泰罗尼亚高级研究院）
We investigate photoluminescence (PL) transitions of MAPbX$_{3}$ (X = I, Br and Cl) organic-inorganic hybrid perovskite single crystals under magnetic fields of up to 60 T. In these materials, sharp free-exciton transition peaks emerge at a low temperature (4.2 K). Under strong magnetic fields, the free-exciton PL transitions of three different halogens show dramatic differences. The free-exciton transitions of the MAPbCl$_{3}$ crystal undergo negative energy shifts, while those of the MAPbBr$_{3}$ crystal show normal diamagnetic shifts. To obtain the variation from Cl to Br, we attempt to mea…
Using cross-correlation current noise spectroscopy, we have investigated carrier dynamics in methylammonium lead triiodide solar cells. This method provides a space selectivity for devices with planar multi-layered structure, effectively amplifying current noise contributions coming from the most resistive element of the stack. In the studied solar cells, we observe near full-scale shot noise, indicating the dominance of noise generation by a single source, likely the interface between the perovskite and the spiro-OMeTAD hole-transport layer. We argue that the strong 1/f noise term has contrib…
Why Lead Methylammonium tri-IODIDE perovskite-based solar cells requires a mesoporous electron transporting scaffold (but not necessarily a hole conductor)
Halogen in Materials Design: Revealing the Nature of Hydrogen Bonding and Other Non-Covalent Interactions in the Polymorphic Transformations of Methylammonium Lead Tribromide Perovskite
The most studied perovskite-based solar cells reported up to date contain the toxic lead in its composition. Photovoltaic research and development towards non-toxic, lead-free perovskite solar cells are critical to finding alternatives to reduce human health concerns associated with them. Bismuth-based perovskite variants, especially in the form of methylammonium bismuth iodide (MBI), is a good candidate for the non-toxic light absorber. However, the reported perovskite variant MBI thin flms prepared by the solution process so far suffers from poor morphology and surface coverage. In this work…
We have observed short-lived optical birefringence in a CH$_3$NH$_3$PbBr$_3$ single crystal induced by a powerful nearly single-cycle terahertz pulse. Apart from the instantaneous contribution that follows the profile of the squared pump electric field, the recorded anisotropy signal contains an exponential component decaying in $\sim$ 350 fs, underdamped oscillations at the frequency of $\sim$ 0.16 THz and an intermediate picosecond relaxation process with a Gaussian tail. We associate these three non-trivial features with, respectively, Kerr effect in the inorganic lattice, terahertz-induced…
Hybrid lead halide perovskites with 2D stacking structures have recently emerged as promising materials for optoelectronic applications. We report a method for growing 2D nanosheets of hybrid lead halide perovskites (I, Br and Cl), with tunable lateral sizes ranging from 0.05 to 8 microns, and a structure consisting of n stacked monolayers separated by long alkylamines, tunable from bulk down to n=1. The key to obtaining such a wide range of perovskite properties hinged on utilizing the respective lead halide nanosheets as precursors in a hot-injection synthesis that afforded careful control o…
In hybrid perovskites, the organic molecules and inorganic frameworks exhibit distinct static and dynamic characteristics. Their coupling will lead to unprecedented phenomena, which have attracted wide research interests. In this paper, we employed Deep Potential molecular dynamics (DPMD), a large-scale MD simulation scheme with DFT accuracy, to study $\mathrm{FA/MAPbI_3}$ hybrid perovskites. A spontaneous hybrid nano-domain behavior, namely multiple molecular rotation nano-domains embedded into a single $\mathrm{[PbI_6]^{4-}}$ octahedra rotation domain, was firstly discovered at low temperatu…
We study the effects of bismuth doping on the crystal structure and phase transitions in single crystals of the perovskite semiconductor methylammonium lead tribromide, MAPbBr3. By measuring temperature-dependent specific heat capacity (Cp) we find that, as Bi doping increases, the phase transition assigned to the cubic to tetragonal phase boundary decreases in temperature. Furthermore, after doping we observe one phase transition between 135 and 155 K, in contrast to two transitions observed in the undoped single crystal. These results appear strikingly similar to previously reported effects …
Instabilities relating to cooperative octahedral tilting is common in materials with perovskite structures, and in particular in the sub class of halide perovskites. In this work, the energetics of octahedral tilting in the inorganic metal halide perovskites CsPbI$_3$ and CsSnI$_3$ are investigated using first-principles density functional theory calculations. Several low energy paths between symmetry equivalent variants of the stable orthorhombic (\textit{Pnma}) perovskite variant are identified and investigated. The results are in favor of the presence of dynamic disorder in the octahedral t…
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufacturing, MHPs-based solar cells have become the fastest-advancing photovoltaic technology. In this regard, much of the recent work has been dominated by absorber materials based on methylammonium MHPs, …
