Moving beyond traditional 2D materials is now desirable to have switching capabilities (e.g., transistors). Here we propose using borophene because, as we will show in this letter, obtaining regions of the electronic bandstructure which act as valence and conduction bands, with an apparent bandgap, may be obtainable in the foreseeable future. Here for particular allotropes of borophene, density of states (DOS) and electronic bandstructure diagrams with E(k) vs k are found with much improved accuracy by ab initio quantum calculations using hybrid functionals of several types. This procedure should allow much better insight into how to obtain acceptable materials.
In recent years, two-dimensional boron sheets (borophene) have been experimentally synthesized and theoretically observed as promising conductor or transistor with novel thermal and electronic properties. We first give a general survey of some notable electronic properties of borophene, including the superconductivity and topological characters. We then mainly review the basic approaches, thermal transport, as well as the mechanical properties of borophene with different configurations. This review gives a general understanding of some of the crucial thermal transport and electronic properties…
We performed a theoretical investigation of the structural and electronic properties of (i) pristine, and (ii) superlattice structures of borophene. In (i), by combining first-principles calculations, based on the density functional theory (DFT), and simulations of the X-ray Absorption Near-Edge Structure (XANES) we present a comprehensive picture connecting the atomic arrangement of borophene and the X-ray absorption spectra. Once we have characterized the electronic properties of the pristine systems, we next examined the electronic confinement effects in 2D borophene superlattices (BSLs) [(…
First-principles calculations on monolayer 8-{\it Pmmn} borophene are reported to reveal unprecedented electronic properties in a two-dimensional material. Based on a Born effective charge analysis, 8-{\it Pmmn} borophene is the first single-element based monolayered material exhibiting two sublattices with substantial ionic features. The observed Dirac cones are actually formed by the p$_z$ orbitals of one of the inequivalent sublattices composed of uniquely four atoms, yielding an underlying hexagonal network topologically equivalent to distorted graphene. A significant physical outcome of t…
Borophene has triggered a surge of interest due to its outstanding properties including mechanical flexibility, polymorphism, and opto-electrical anisotropy. Very recently, a novel semi-hydrogenated borophene, called $α'$-4H, was synthesized in large-scale freestanding samples, which exhibits excellent air-stability and semiconducting nature. Herein, using the density functional theory (DFT) and many-body perturbation theory (MBPT), we investigate the electronic and excitonic optical properties of $α'$-4H borophene. The DFT results reveal that by breaking the mirror symmetry and increasing the…
We report first principle calculations of electronic and mechanical properties of few-layer borophene with the inclusion of interlayer van der Waals (vdW) interaction. The anisotropic metallic behaviors are preserved from monolayer to few-layer structures. The energy splitting of bilayer borophene at $Γ$ point near the Fermi level is about 1.7 eV, much larger than the values (0.5--1 eV) of other layered semiconductors, indicating much stronger vdW interactions in metallic layered borophene. In particular, the critical strains are enhanced by increasing the number of layers, leading to much mor…
The groundbreaking works in graphene and graphene nanoribbons (GNRs) over the past decade, and the recent discovery of borophene draw immediate attention to the underexplored borophene nanoribbons (BNRs). We herein report a density functional theory (DFT) study of the geometric, electronic and magnetic properties of BNRs as a function of orientation (denoted as BxNRs and ByNRs with the orientation along x- and y-axis, respectively), ribbon width (Nx, Ny = 4 to 15), and hydrogenation effects. We found that the anisotropic quasi-planar geometric structure of BNRand its edge states profoundly gov…
An increasing number of theoretical calculations on few-layer materials have been reporting a non-zero sound velocity for all three acoustic phonon modes. In contrast with these reports, here we show that the lowest phonon dispersion branch of atomistically described few-layer materials should be quadratic, and this can have dramatic consequencies on calculated properties, such as the thermal conductivity. By reformulating the interatomic force constants (IFC) in terms of internal coordinates, we find that a delicate balance between the IFCs is responsible for this quadraticity. This balance i…
A computation methodology based on ab initio evolutionary algorithms and the spin-polarized density functional theory was developed to predict two-dimensional (2D) magnetic materials. Its application to a model system borophene reveals an unexpected rich magnetism and polymorphism. A stable borophene with nonzero thickness was an antiferromagnetic (AFM) semiconductor from first-principles calculations, which can be further turned into a half metal by finite electron doping. In this borophene, the buckling and coupling among three atomic layers are not only responsible for the magnetism, but al…
Borophene (two-dimensional boron sheet) is a new type of two-dimensional material, which was recently grown successfully on single crystal Ag substrates. In this paper, we investigate the electronic structure and bonding characteristics of borophene by first-principle calculations. The band structure of borophene shows highly anisotropic metallic behaviour. The obtained optical properties of borophene exhibit strong anisotropy as well. The combination of high optical transparency and high electrical conductivity in borophene makes it a promising candidate for future design of transparent condu…
Borophene, a monoatomic layer of boron atoms, stands out among two-dimensional (2D) materials, with its versatile properties of polymorphism, metallicity, plasmonics, superconductivity, tantalizing for physics exploration and next-generation devices. Yet its phases are all synthesized on and stay bound to metal substrates, hampering both characterization and use. The growth on the inert insulator would allow post-synthesis exfoliation of borophene, but its weak adhesion to such substrate results in a very high 2D-nucleation barrier preventing clean borophene growth. This challenge can be circu…
We systematically investigated electronic evolutions of non-symmorphic borophene with chemical environments that were realized by the ion exchange method. Electronic structures can be characterized by the topological $Z_2$ invariant. Spectroscopic experiments and DFT calculations unveiled that a sheet of hydrogenated borophene (borophane) is the Dirac nodal loop semimetal ($Z_2=-1$), while a layered crystal of YCrB$_4$ is an insulator ($Z_2=1$). The results demonstrate the electronic topological transition by replacement of the counter atoms on the non-symmorphic borophene layer.
The past decade has witnessed numerous discoveries of two-dimensional (2D) semimetals and insulators, whereas 2D metals are rarely identified. Borophene, a monolayer boron sheet, has recently emerged as a perfect 2D metal with unique structure and electronic properties. Here we study collective excitations in borophene, which exhibit two major plasmon modes with low damping rates extending from infrared to ultraviolet regime. The anisotropic 1D plasmon originates from electronic excitations of tilted Dirac cones in borophene, analogous to that in heavily doped Dirac semimetals. These features …
Charge transfer from a metal substrate stabilizes honeycomb borophene, whose electron deficit would otherwise spoil the hexagonal order of a $π$-bonded 2D atomic network. However, the coupling between the substrate and the boron overlayer may result in the formation of strong chemical bonds that would compromise the electronic properties of the overlayer. In this paper we present a theoretical study, based on state-of-the-art density-functional and genetic-optimization techniques, of the electronic and structural properties of borophene grown on Al(111), with emphasis on the impact of oxygen o…
Honeycomb structures of group IV elements can host massless Dirac fermions with non-trivial Berry phases. Their potential for electronic applications has attracted great interest and spurred a broad search for new Dirac materials especially in monolayer structures. We present a detailed investigation of the β12 boron sheet, which is a borophene structure that can form spontaneously on a Ag(111) surface. Our tight-binding analysis revealed that the lattice of the β12-sheet could be decomposed into two triangular sublattices in a way similar to that for a honeycomb lattice, thereby hosting Dirac…
The electronic and the structural properties of two dimensional van der Waals metal/semiconductor heterostructures have been investigated through first-principles calculations. We have considered the recently synthesized borophene [Science {\bf 350}, 1513 (2015)], and the planar boron sheets (S1 and S2) [Nature Chemistry {\bf 8}, 563 (2016)] as the 2D metal layer, and the transition metal dichalcogenides (TMDCs) \mose, and \wse\ as the semiconductor monolayer. We find that the energetic stability of those 2D metal/semiconductor heterojunctions is mostly ruled by the vdW interactions; however, …
New crystal structures of fully hydrogenated borophene (borophane) have been predicted by first principles calculation. Comparing with the chair-like borophane (C-boropane) that has been reported in literature, we obtained four new borophane conformers with much lower total-energy. The most stable one, washboard-like borophane (W-borophane), has energy about 113.41 meV/atom lower than C-borophane. In order to explain the relative stability of different borophane conformers, the atom configuration, density of states, charge transfer, charge density distribution and defect formation energy of B-…
The search for topological semimetals is mainly focused on heavy-element compounds as following the footsteps of previous research on topological insulators, with less attention on light-element materials. However, the negligible spin orbit coupling with light elements may turn out to be beneficial for realizing topological band features.Here, using first-principles calculations, we propose a new two-dimensional light-element material-the honeycomb borophene oxide (h-B2O), which has nontrivial topological properties.The proposed structure is based on the recently synthesized honeycomb borophen…
The accuracy of a single s-orbital representation of Cu towards enabling multi-thousand atom ab initio calculations of electronic structure is evaluated in this work. If an electrostatic compensation charge of approximately 0.3 electrons per atom is used in this basis representation of copper, the electronic transmission in bulk and nanocrystalline Cu compares accurately to that obtained with a Double Zeta Polarized basis set. The use of this representation is analogous to the use of single band effective mass representation for semiconductor electronic structure. With a basis of just one s-or…
The ab initio calculation with the density functional theory and plane-wave bases is carried out for stepped Si(111)-2x1 surfaces that were predicted in a cleavage simulation by the large-scale (order-N) electronic structure theory (T. Hoshi, Y. Iguchi and T. Fujiwara, Phys. Rev. B72 (2005) 075323). The present ab initio calculation confirms the predicted stepped structure and its bias-dependent STM image. Moreover, two (meta)stable step-edge structures are found and compared. The investigation is carried out also for Ge(111)-2x1 surfaces, so as to construct a common understanding among elemen…
The temperature-induced structural and electronic transformation in VO$_2$ between the monoclinic M1 and tetragonal rutile phases was studied by means of \textit{ab initio} molecular dynamics, based on density functional theory with Hubbard correction (DFT+U). Analysis of the dynamical processes associated with the structural transformation was carried out on the atomic scale by following the time evolution of dimerization amplitudes of vanadium atom chains and the twisting angle of vanadium dimers. The electronic transition was studied by tracing the changes in projected densities of states a…
We performed an {\it ab initio} investigation on the properties of rutile tin oxide (SnO$_{x}$) nanowires. We computed the wire properties determining the equilibrium geometries, binding energies and electronic band structures for several wire dimensions and surface facet configurations. The results allowed to establish scaling laws for the structural properties, in terms of the nanowire perimeters. The results also showed that the surface states control most of the electronic properties of the nanowires. Oxygen incorporation in the nanowire surfaces passivated the surface-related electronic s…
Electronic structure of FeGa3 has been studied using experiments and ab-initio calculations. Magnetization measurements show that FeGa3 is inherently diamagnetic in nature. Our studies indicate that the previously reported magnetic moment on the Fe atoms in FeGa3 is not an intrinsic property of FeGa3, but is primarily due to the presence of disorder, defects, grain boundaries etc that break the symmetry about the Fe dimers. Analysis of the results obtained from magnetic measurements, photoelectron spectroscopy, Fe K-edge X-ray absorption near edge spectroscopy and ab-initio calculations clearl…
We have performed ab-initio calculations using plane-wave ultraviolet pseudopotential technique based on the density-functional theory (DFT) to study the structural, mechanical, electronic, optical and thermodynamic properties of orthorhombic MgV2O6. The calculated lattice parameters are in good agreement with the available experimental data. The second-order elastic constants and the other relevant quantities such as the Youngs modulus, shear modulus, Poissons ratio, compressibility, anisotropy factor, sound velocity, and Debye temperature have been calculated. After analyzing the calculated …
The PEO3:LiCF3SO3 polymer electrolyte has attracted significant research due to its enhanced stability at the lithium/polymer interface of high conductivity polymer batteries. Experimental studies have shown that, depending on the preparation conditions, both the PEO3:LiCF3SO3 crystalline complex and the PEO3:LiCF3SO3 amorphous phase can be formed. However, previous theoretical investigations focused on the short chain amorphous PEO3:LiCF3SO3 system. We report ab initio density-functional-theory calculations of crystalline PEO3:LiCF3SO3. The calculated results about the bonding configuration, …
A modified core-to-valence band maximum approach is applied to calculate band offsets of strained III/V semiconductor hetero junctions. The method is used for the analysis of (In,Ga)As/GaAs/Ga(As,Sb) multi-quantum well structures. The obtained offsets and the resulting bandstructure are used as input for the microscopic calculation of photoluminescence spectra yielding very good agreement with recent experimental results.
There has been growing interest in perovskite BaSnO3 due to its desirable properties for oxide electronic devices including high electron mobility at room temperature and optical transparency. As these electronic and optical properties originate largely from the electronic structure of the material, here the basic electronic structure of epitaxially-grown BaSnO3 films is studied using high-energy-resolution electron energy-loss spectroscopy in a transmission electron microscope and ab initio calculations. This study provides a detailed description of the dielectric function of BaSnO3, includin…
The comparative study of structural, electronic properties, topology of the Fermi surface, and the features of chemical bonding in layered 1111-oxyarsenides LaRhAsO and LaIrAsO has been performed based on the results of ab initio modeling of their electronic structure. It was established that only weak sensitivity with respect both to electron and hole doping is expected for LaIrAsO being non-magnetic metal, however, the Rh-containing compound should be characterized with weak band magnetism, and the hole doping is expected to be able to move its ground state away from the boundary of magnetic…
Unmasking charge transfer in the Misfits: ARPES and ab initio prediction of electronic structure in layered incommensurate systems without artificial strain
Using first principle calculations under the framework of density functional theory we have investigated the electronic structure, magnetism and ferroelectric polarization in the triangular lattice antiferromagnet AgFeO2, and its comparison to the isostructural system CuFeO2. Our calculations reveal that spin orbit interaction plays an important role in determining the magnetic property of AgFeO2 and is possibly responsible for its different magnetic ground state in comparison to CuFeO2. Calculations of ferroelectric polarization of AgFeO2 suggest that the spontaneous polarization arises from …
An ab initio study of the electronic structures of solid metallotetrabenzoporphyrins (MTBPs) utilized in organic transistors and photovoltaics is presented. Bandstructures, densities of states, and orbitals are calculated for H2, Cu, Ni, and Zn core substitutions of the unit cell of solid TBP, as deposited via soluble precursors that are thermally annealed to produce polycrystalline, semiconducting thin-films. While the unit cells of the studied MTBPs are nearly isomorphous, substitution of the core atoms alters the structure of the bands around the energy bandgap and the composition of the de…
The structural, electronic, mechanical and thermal properties of Ir$_{1-x}$Rh$_{x}$ alloys were studied systematically using ab initio density functional theory at different concentrations (x = 0.00, 0.25, 0.50, 0.75, 1.00). A Special Quasirandom Structure method was used to make alloys having FCC structure with four atoms per unit cell. The ground state properties such as lattice constant and bulk modulus were calculated to find the equilibrium atomic position for stable alloys. The calculated ground state properties are in good agreement with the experimental and previously presented other t…
Semiconducting transition metal dichalcogenides present a complex electronic band structure with a rich orbital contribution to their valence and conduction bands. The possibility to consider the electronic states from a tight-binding model is highly useful for the calculation of many physical properties, for which first principle calculations are more demanding in computational terms when having a large number of atoms. Here, we present a set of Slater-Koster parameters for a tight-binding model that accurately reproduce the structure and the orbital character of the valence and conduction ba…
We present a first-principles study of the structural, electronic, and optical properties of hydrogenated amorphous silicon (a-Si:H). To this end, atomic configurations of a-Si:H with 72 and 576 atoms respectively are generated using molecular dynamics. Density functional theory calculations are then applied to these configurations to obtain the electronic wave functions. These are analyzed and characterized with respect to their localization and their contribution to the density of states, and are used for calculating ab-initio absorption spectra of a-Si:H. The results show that both the size…
From DFT based calculations establishing energy-volume equations of state and electron localization mapping, the electronic structure and crystal chemistry changes from Sn2TiO4 to Sn2TiO6 by oxidation are rationalized; the key effect being the destabilization of divalent tin SnII towards tetravalent state SnIV leading to rutile Sn2TiO6 as experimentally observed. The subsequent electronic structure change is highlighted in the relative change of the electronic band gap which increases from ~1eV up to 2.2 eV and the 1.5 times increase of the bulk modulus assigned to the change from covalently S…
The split silicon-vacancy defect (SiV) in diamond is an electrically and optically active color center. Recently, it has been shown that this color center is bright and can be detected at the single defect level. In addition, the SiV defect shows a non-zero electronic spin ground state that potentially makes this defect an alternative candidate for quantum optics and metrology applications beside the well-known nitrogen-vacancy color center in diamond. However, the electronic structure of the defect, the nature of optical excitations and other related properties are not well-understood. Here w…
The electronic properties of the twisted InSe bilayer are studied by large-scale density functional theory. Spectral Function Unfolding reveals that the electronic structure of the twisted system can be described in terms of a combination of features of the bandstructures of the aligned InSe bilayer with different stacking configurations, enabling predictions of the band gap and the effective mass for holes. The effective mass for holes in the twisted InSe bilayer is shown to be influenced primarily by the interlayer distance. The intralayer and interlayer exciton binding energies are thus cal…
Based on ab initio density functional theory, we have investigated a microscopic mechanism that leads to Fe$^{2+}_{B}$/Fe$^{3+}_{B}$ dimerization and consequent ferroelectricity in charge ordered Fe$_{3}$O$_{4}$ with $P2$ symmetry. In addition to the simple inter-site Coulomb repulsion, quantum hybridization effects are invoked to explain the Fe$^{2+}_{B}$/Fe$^{3+}_{B}$ bond dimerization. Our results, based on the generalized gradient approximation + Hubbard $U$ (GGA+$U$) method, indicate that noncentrosymmetric $P2$ magnetite shows a finite and sizeable ferroelectric polarization along the $b…
We use ab initio density functional calculations to determine the interaction of a graphene monolayer with the Si(111) surface. We found that graphene forms strong bonds to the bare substrate and accommodates the 12% lattice mismatch by forming a wavy structure consisting of free-standing conductive ridges that are connected by ribbon-shaped regions of graphene, which bond covalently to the substrate. We perform quantum transport calculations for different geometries to study changes in the transport properties of graphene introduced by the wavy structure and bonding to the Si substrate. Our r…
Full-potential linearized augmented plane-wave method with the generalized gradient approximation for the exchange-correlation potential was applied for comparative study of elastic and electronic properties of six cubic thorium pnictides ThPn and Th3Pn4, where Pn = P, As, and Sb. Optimized lattice parameters, theoretical density, independent elastic constants (Cij), bulk moduli (B), shear moduli (G), Young's moduli (Y), and Poisson's ratio (ν) were obtained for the first time and analyzed in comparison with available theoretical and experimental data. The electronic band structures, total and…
We present a detailed ab-initio study of semi-classical transport in n-ZnSe using Rode's iterative method. Inclusion of ionized impurity, piezoelectric, acoustic deformation and polar optical phonon scattering and their relative importance at low and room temperature for various n-ZnSe samples are discussed in depth. We have clearly noted that inelastic polar optical phonon scattering is the most dominant scattering mechanism over most of the temperature region. Our results are in good agreement with the experimental data for the mobility and conductivity obtained at different doping concentra…
We present accurate many-body results of the electronic densities in several solid materials, including Si, NaCl, and Cu. These results are obtained using the ab initio auxiliary-field quantum Monte Carlo (AFQMC) method working in a plane-wave basis with norm-conserving, multiple-projector pseudopotentials. AFQMC has been shown to be an excellent many-body total energy method. Computation of observables and correlation functions other than the ground-state energy requires back-propagation, whose adaption and implementation in the plane-wave basis AFQMC framework are discussed in the present pa…
We report on a theoretical study of the electronic, optical and magneto-optical properties of digital ferromagnetic hetero-structures based on $Mn$ $δ$--doped $GaAs$. We consider different structures corresponding to $Mn$ contents within the range 12-50\% and we study how the system changes as a function of the doping concentration. Our first--principles approach includes the spin-orbit interaction in a fully relativistic pseudopotential scheme and the local fields effect in the description of the optical absorption. We show that $Mn$ $δ$-doped $GaAs$ shares many properties with the uniformly …
Using first-principles calculations, the structural, elastic and electronic properties of MoAlB have been investigated for the first time. The optimized lattice constants exhibit fair agreement with the experimental values. The computed elastic constants satisfy the mechanical stability conditions for the MoAlB. The Mo-based boride MoAlB is elastically anisotropic and can be classified as brittle material. This boride is expected to show reasonable thermal conductivity due to its high Debye temperature of 693 K. The metallic electrical conductivity of this compound is predicted from the electr…
An empirical multiorbital (spd) tight binding (TB) model including magnetism and spin-orbit coupling is applied to calculations of magnetic anisotropy energy (MAE) in CoPt L1_0 structure. A realistic Slater-Koster parametrisation for single-element transition metals is adapted for the ordered binary alloy. Spin magnetic moment and density of states are calculated using a full-potential linearized augmented plane-wave (LAPW) ab initio method and our TB code with different variants of the interatomic parameters. Detailed mutual comparison of this data allows for determination of a subset of the …
