Detection of pedestrians on embedded devices, such as those on-board of robots and drones, has many applications including road intersection monitoring, security, crowd monitoring and surveillance, to name a few. However, the problem can be challenging due to continuously-changing camera viewpoint and varying object appearances as well as the need for lightweight algorithms suitable for embedded systems. This paper proposes a robust framework for pedestrian detection in many footages. The framework performs fine and coarse detections on different image regions and exploits temporal and spatial characteristics to attain enhanced accuracy and real time performance on embedded boards. The framework uses the Yolo-v3 object detection [1] as its backbone detector and runs on the Nvidia Jetson TX2 embedded board, however other detectors and/or boards can be used as well. The performance of the framework is demonstrated on two established datasets and its achievement of the second place in CVPR 2019 Embedded Real-Time Inference (ERTI) Challenge.
Detection of pedestrians in aerial imagery captured by drones has many applications including intersection monitoring, patrolling, and surveillance, to name a few. However, the problem is involved due to continuouslychanging camera viewpoint and object appearance as well as the need for lightweight algorithms to run on on-board embedded systems. To address this issue, the paper proposes a framework for pedestrian detection in videos based on the YOLO object detection network [6] while having a high throughput of more than 5 FPS on the Jetson TX2 embedded board. The framework exploits deep lear…
Vehicle-to-Pedestrian (V2P) communication can significantly improve pedestrian safety at a signalized intersection. It is unlikely that pedestrians will carry a low latency communication enabled device and activate a pedestrian safety application in their hand-held device all the time. Because of this limitation, multiple traffic cameras at the signalized intersection can be used to accurately detect and locate pedestrians using deep learning and broadcast safety alerts related to pedestrians to warn connected and automated vehicles around a signalized intersection. However, unavailability of …
School of Electrical and Information Engineering, Tianjin University（天津大学电气与信息工程学院）；Center for OPTical IMagery Analysis and Learning (OPTIMAL), State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences（中国科学院西安光学精密机械研究所瞬态光学与光子技术国家重点实验室OPTIMAL光学影像分析与学习中心）
To better detect pedestrians of various scales, deep multi-scale methods usually detect pedestrians of different scales by different in-network layers. However, the semantic levels of features from different layers are usually inconsistent. In this paper, we propose a multi-branch and high-level semantic network by gradually splitting a base network into multiple different branches. As a result, the different branches have the same depth and the output features of different branches have similarly high-level semantics. Due to the difference of receptive fields, the different branches are suita…
University of California, San Diego（加利福尼亚大学圣地亚哥分校）；Laboratory for Intelligent and Safe Automobiles（智能与安全汽车实验室）
The intelligent vehicle community has devoted considerable efforts to model driver behavior, and in particular to detect and overcome driver distraction in an effort to reduce accidents caused by driver negligence. However, as the domain increasingly shifts towards autonomous and semi-autonomous solutions, the driver is no longer integral to the decision making process, indicating a need to refocus efforts elsewhere. To this end, we propose to study pedestrian distraction instead. In particular, we focus on detecting pedestrians who are engaged in secondary activities involving their cellphone…
LTV-YOLO: A Lightweight Thermal Object Detector for Young Pedestrians in Adverse Conditions
Automotive and Surface Transportation National Research Council Canada（交通运输国家研究院加拿大）；Department of Civil and Environmental Engineering University of Western Ontario（土木与环境工程系温哥华大学）
Iris Recognition (IR) is one of the market's most reliable and accurate biometric systems. Today, it is challenging to build NIR-capturing devices under the premise of hardware price reduction. Commercial NIR sensors are protected from modification. The process of building a new device is not trivial because it is required to start from scratch with the process of capturing images with quality, calibrating operational distances, and building lightweight software such as eyes/iris detectors and segmentation sub-systems. In light of such challenges, this work aims to develop and implement iris r…
GTransPDM: A Graph-embedded Transformer with Positional Decoupling for Pedestrian Crossing Intention Prediction
Department of Traffic Information and Control Engineering, Jilin University（交通信息与控制工程系，吉林大学）；BIT-Barcelona Innovative Transportation Research Group, Civil Engineering School, UPC Barcelona Tech（巴塞罗那创新交通研究组，土木工程学院，UPC巴塞罗那技术学院）；Computer Vision Center (CVC), Computer Science Department, Universitat Autònoma de Barcelona (UAB)（计算机视觉中心（CVC），计算机科学系，巴塞罗那自治大学（UAB））
针对行人位置畸变及多模态时序建模难题，本文提出 GTransPDM，通过位置解耦与图嵌入 Transformer 融合姿态、位置和车辆运动特征，在 PIE 和 JAAD 上取得最优性能。
Object detection is an essential component of many vision systems. For example, pedestrian detection is used in advanced driver assistance systems (ADAS) and advanced video surveillance systems (AVSS). Currently, most detectors use deep convolutional neural networks (e.g., the YOLO -- You Only Look Once -- family), which, however, due to their high computational complexity, are not able to process a very high-resolution video stream in real-time, especially within a limited energy budget. In this paper we present a hardware implementation of the well-known pedestrian detector with HOG (Histogr…
The pedestrian crossing intention prediction problem is to estimate whether or not the target pedestrian will cross the street. State-of-the-art techniques heavily depend on visual data acquired through the front camera of the ego-vehicle to make a prediction of the pedestrian's crossing intention. Hence, the efficiency of current methodologies tends to decrease notably in situations where visual input is imprecise, for instance, when the distance between the pedestrian and ego-vehicle is considerable or the illumination levels are inadequate. To address the limitation, in this paper, we prese…
Pedestrian detection in a crowd is a very challenging issue. This paper addresses this problem by a novel Non-Maximum Suppression (NMS) algorithm to better refine the bounding boxes given by detectors. The contributions are threefold: (1) we propose adaptive-NMS, which applies a dynamic suppression threshold to an instance, according to the target density; (2) we design an efficient subnetwork to learn density scores, which can be conveniently embedded into both the single-stage and two-stage detectors; and (3) we achieve state of the art results on the CityPersons and CrowdHuman benchmarks.
Convolutional Neural Networks achieve state-of-the-art accuracy in object detection tasks. However, they have large computational and energy requirements that challenge their deployment on resource-constrained edge devices. Object detection takes an image as an input, and identifies the existing object classes as well as their locations in the image. In this paper, we leverage the prior knowledge about the probabilities that different object categories can occur jointly to increase the efficiency of object detection models. In particular, our technique clusters the object categories based on t…
Universitat Autonoma de Barcelona（巴塞罗那自治大学）；Computer Vision Centre (CVC)（计算机视觉中心）
We propose a real-time pedestrian detection system for the embedded Nvidia Tegra X1 GPU-CPU hybrid platform. The pipeline is composed by the following state-of-the-art algorithms: Histogram of Local Binary Patterns (LBP) and Histograms of Oriented Gradients (HOG) features extracted from the input image; Pyramidal Sliding Window technique for candidate generation; and Support Vector Machine (SVM) for classification. Results show a 8x speedup in the target Tegra X1 platform and a better performance/watt ratio than desktop CUDA platforms in study.
University Politehnica of Bucharest（布加勒斯特理工大学）；The University of Edinburgh（爱丁堡大学）
Recent advancements in energy-efficient hardware technology is driving the exponential growth we are experiencing in the Internet of Things (IoT) space, with more pervasive computations being performed near to data generation sources. A range of intelligent devices and applications performing local detection is emerging (activity recognition, fitness monitoring, etc.) bringing with them obvious advantages such as reducing detection latency for improved interaction with devices and safeguarding user data by not leaving the device. Video processing holds utility for many emerging applications an…
Instituto de Telecomunicações（电信研究所）；University of Beira Interior（贝拉内格罗大学）；India Statistical Institute（印度统计研究所）；JSS Science and Technology University（JSS科技大学）
Over the last decades, the world has been witnessing growing threats to the security in urban spaces, which has augmented the relevance given to visual surveillance solutions able to detect, track and identify persons of interest in crowds. In particular, unmanned aerial vehicles (UAVs) are a potential tool for this kind of analysis, as they provide a cheap way for data collection, cover large and difficult-to-reach areas, while reducing human staff demands. In this context, all the available datasets are exclusively suitable for the pedestrian re-identification problem, in which the multi-cam…
Accurate and efficient pedestrian detection is crucial for the intelligent transportation system regarding pedestrian safety and mobility, e.g., Advanced Driver Assistance Systems, and smart pedestrian crosswalk systems. Among all pedestrian detection methods, vision-based detection method is demonstrated to be the most effective in previous studies. However, the existing vision-based pedestrian detection algorithms still have two limitations that restrict their implementations, those being real-time performance as well as the resistance to the impacts of environmental factors, e.g., low illum…
In the absence of pedestrian crossing lights, finding a safe moment to cross the road is often hazardous and challenging, especially for people with visual impairments. We present a reliable low-cost solution, an Android device attached to a traffic sign or lighting pole near the crossing, indicating whether it is safe to cross the road. The indication can be by sound, display, vibration, and various communication modalities provided by the Android device. The integral system camera is aimed at approaching traffic. Optical flow is computed from the incoming video stream, and projected onto an …
Politecnico di Milano（米兰理工大学）；STMicroelectronics（意法半导体）
Accurate pedestrian detection has a primary role in automotive safety: for example, by issuing warnings to the driver or acting actively on car's brakes, it helps decreasing the probability of injuries and human fatalities. In order to achieve very high accuracy, recent pedestrian detectors have been based on Convolutional Neural Networks (CNN). Unfortunately, such approaches require vast amounts of computational power and memory, preventing efficient implementations on embedded systems. This work proposes a CNN-based detector, adapting a general-purpose convolutional network to the task at ha…
Volkswagen Group（大众汽车集团）；Innovation Center California（加州创新中心）
Detecting and predicting the behavior of pedestrians is extremely crucial for self-driving vehicles to plan and interact with them safely. Although there have been several research works in this area, it is important to have fast and memory efficient models such that it can operate in embedded hardware in these autonomous machines. In this work, we propose a novel architecture using spatial-temporal multi-tasking to do camera based pedestrian detection and intention prediction. Our approach significantly reduces the latency by being able to detect and predict all pedestrians' intention in a si…
Suite-IN++: A FlexiWear BodyNet Integrating Global and Local Motion Features from Apple Suite for Robust Inertial Navigation
Shanghai Key Laboratory of Navigation and Location-based Services, School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University（上海导航与位置服务重点实验室，电子信息与电气工程学院，上海交通大学）
KIOS Research and Innovation Center of Excellence（KIOS卓越研究与创新中心）；University of Cyprus（塞浦路斯大学）
Deep Learning-based object detectors can enhance the capabilities of smart camera systems in a wide spectrum of machine vision applications including video surveillance, autonomous driving, robots and drones, smart factory, and health monitoring. Pedestrian detection plays a key role in all these applications and deep learning can be used to construct accurate state-of-the-art detectors. However, such complex paradigms do not scale easily and are not traditionally implemented in resource-constrained smart cameras for on-device processing which offers significant advantages in situations when r…
Pedestrian's road crossing behaviour is one of the important aspects of urban dynamics that will be affected by the introduction of autonomous vehicles. In this study we introduce DeepSurvival, a novel framework for estimating pedestrian's waiting time at unsignalized mid-block crosswalks in mixed traffic conditions. We exploit the strengths of deep learning in capturing the nonlinearities in the data and develop a cox proportional hazard model with a deep neural network as the log-risk function. An embedded feature selection algorithm for reducing data dimensionality and enhancing the interpr…
Predicting pedestrian crossing intention is an indispensable aspect of deploying advanced driving systems (ADS) or advanced driver-assistance systems (ADAS) to real life. State-of-the-art methods in predicting pedestrian crossing intention often rely on multiple streams of information as inputs, each of which requires massive computational resources and heavy network architectures to generate. However, such reliance limits the practical application of the systems. In this paper, driven the the real-world demands of pedestrian crossing intention prediction models with both high efficiency and a…
This article describes an approach to detect the wearing location of smart devices worn by pedestrians and cyclists. The detection, which is based solely on the sensors of the smart devices, is important context-information which can be used to parametrize subsequent algorithms, e.g. for dead reckoning or intention detection to improve the safety of vulnerable road users. The wearing location recognition can in terms of Organic Computing (OC) be seen as a step towards self-awareness and self-adaptation. For the wearing location detection a two-stage process is presented. It is subdivided into …
KU Leuven（鲁汶大学）；PXL Smart-ICT, Hogeschool PXL（PXL Smart-ICT，PXL大学学院）
Shopping behaviour analysis through counting and tracking of people in shop-like environments offers valuable information for store operators and provides key insights in the stores layout (e.g. frequently visited spots). Instead of using extra staff for this, automated on-premise solutions are preferred. These automated systems should be cost-effective, preferably on lightweight embedded hardware, work in very challenging situations (e.g. handling occlusions) and preferably work real-time. We solve this challenge by implementing a real-time TensorRT optimized YOLOv3-based pedestrian detector,…
A Full-Stage Refined Proposal Algorithm for Suppressing False Positives in Two-Stage CNN-Based Detection Methods
College of Mechanical and Electronic Engineering, Dalian Minzu University（大连民族大学机械与电子工程学院）；Dalian University of Technology（大连理工大学）；Postdoctoral workstation of Dalian Rijia Electronics Co., Ltd.（大连瑞杰电子有限公司博士后工作站）；School of Computer Science and Engineering, Dalian Minzu University（大连民族大学计算机科学与工程学院）；R&D Department of Dalian Rijia Electronics Co., Ltd.（大连瑞杰电子有限公司研发部）
Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）；University of Chinese Academy of Sciences（中国科学院大学）；Renmin University of China（中国人民大学）；CEBSIT, Chinese Academy of Sciences（中国科学院CEBSIT）
Multispectral pedestrian detection has shown great advantages under poor illumination conditions, since the thermal modality provides complementary information for the color image. However, real multispectral data suffers from the position shift problem, i.e. the color-thermal image pairs are not strictly aligned, making one object has different positions in different modalities. In deep learning based methods, this problem makes it difficult to fuse the feature maps from both modalities and puzzles the CNN training. In this paper, we propose a novel Aligned Region CNN (AR-CNN) to handle the w…
Performing the inference step of deep learning in resource constrained environments, such as embedded devices, is challenging. Success requires optimization at both software and hardware levels. Low precision arithmetic and specifically low precision fixed-point number systems have become the standard for performing deep learning inference. However, representing non-uniform data and distributed parameters (e.g. weights) by using uniformly distributed fixed-point values is still a major drawback when using this number system. Recently, the posit number system was proposed, which represents numb…
Fraunhofer Institute of Optronics, System Technologies and Image Exploitation (IOSB)（弗劳恩霍夫光学、系统技术与图像 exploitation 研究所）；Fraunhofer Center for Machine Learning（弗劳恩霍夫机器学习中心）；Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院）；Institute of Photogrammetry and Remote Sensing, Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院摄影测量与遥感研究所）；Vision and Fusion Laboratory, Karlsruhe Institute of Technology (KIT)（卡尔斯鲁厄理工学院视觉与融合实验室）
With the emergence of low-cost robotic systems, such as unmanned aerial vehicle, the importance of embedded high-performance image processing has increased. For a long time, FPGAs were the only processing hardware that were capable of high-performance computing, while at the same time preserving a low power consumption, essential for embedded systems. However, the recently increasing availability of embedded GPU-based systems, such as the NVIDIA Jetson series, comprised of an ARM CPU and a NVIDIA Tegra GPU, allows for massively parallel embedded computing on graphics hardware. With this in min…
This paper presents a novel end-to-end system for pedestrian detection using Dynamic Vision Sensors (DVSs). We target applications where multiple sensors transmit data to a local processing unit, which executes a detection algorithm. Our system is composed of (i) a near-chip event filter that compresses and denoises the event stream from the DVS, and (ii) a Binary Neural Network (BNN) detection module that runs on a low-computation edge computing device (in our case a STM32F4 microcontroller). We present the system architecture and provide an end-to-end implementation for pedestrian detection …
The University of North Carolina at Charlotte（北卡罗来纳大学夏洛特分校）
This article presents REVAMP$^2$T, Real-time Edge Video Analytics for Multi-camera Privacy-aware Pedestrian Tracking, as an integrated end-to-end IoT system for privacy-built-in decentralized situational awareness. REVAMP$^2$T presents novel algorithmic and system constructs to push deep learning and video analytics next to IoT devices (i.e. video cameras). On the algorithm side, REVAMP$^2$T proposes a unified integrated computer vision pipeline for detection, re-identification, and tracking across multiple cameras without the need for storing the streaming data. At the same time, it avoids fa…
With the rapid proliferation of Internet of Things and intelligent edge devices, there is an increasing need for implementing machine learning algorithms, including deep learning, on resource-constrained mobile embedded devices with limited memory and computation power. Typical large Convolutional Neural Networks (CNNs) need large amounts of memory and computational power, and cannot be deployed on embedded devices efficiently. We present Two-Bit Networks (TBNs) for model compression of CNNs with edge weights constrained to (-2, -1, 1, 2), which can be encoded with two bits. Our approach can r…
Friedrich-Alexander University Erlangen-Nuremberg（埃尔朗根-纽伦堡弗里德里希-亚历山大大学）；Johns Hopkins University（约翰斯·霍普金斯大学）
With the increasing computational power of today's workstations, real-time physically-based rendering is within reach, rapidly gaining attention across a variety of domains. These have expeditiously applied to medicine, where it is a powerful tool for intuitive 3D data visualization. Embedded devices such as optical see-through head-mounted displays (OST HMDs) have been a trend for medical augmented reality. However, leveraging the obvious benefits of physically-based rendering remains challenging on these devices because of limited computational power, memory usage, and power consumption. We …
University of North Carolina at Charlotte（北卡罗来纳大学夏洛特分校）
Path prediction is an essential task for many real-world Cyber-Physical Systems (CPS) applications, from autonomous driving and traffic monitoring/management to pedestrian/worker safety. These real-world CPS applications need a robust, lightweight path prediction that can provide a universal network architecture for multiple subjects (e.g., pedestrians and vehicles) from different perspectives. However, most existing algorithms are tailor-made for a unique subject with a specific camera perspective and scenario. This article presents Pishgu, a universal lightweight network architecture, as a r…
Beihang University（北京航空航天大学）；JD.COM Inc（京东集团）；Tongji University（同济大学）；Democritus University of Thrace（德谟克利特大学）
Estimating a scene's depth to achieve collision avoidance against moving pedestrians is a crucial and fundamental problem in the robotic field. This paper proposes a novel, low complexity network architecture for fast and accurate human depth estimation and segmentation in indoor environments, aiming to applications for resource-constrained platforms (including battery-powered aerial, micro-aerial, and ground vehicles) with a monocular camera being the primary perception module. Following the encoder-decoder structure, the proposed framework consists of two branches, one for depth prediction a…
Indian Institute of Technology Bombay（印度理工学院孟买分校）；Purdue University（普渡大学）
Federated learning allows a large number of devices to jointly learn a model without sharing data. In this work, we enable clients with limited computing power to perform action recognition, a computationally heavy task. We first perform model compression at the central server through knowledge distillation on a large dataset. This allows the model to learn complex features and serves as an initialization for model fine-tuning. The fine-tuning is required because the limited data present in smaller datasets is not adequate for action recognition models to learn complex spatio-temporal features…
2D Key-point estimation is an important precursor to 3D pose estimation problems for human body and hands. In this work, we discuss the data, architecture, and training procedure necessary to deploy extremely efficient 2.5D hand pose estimation on embedded devices with highly constrained memory and compute envelope, such as AR/VR wearables. Our 2.5D hand pose estimation consists of 2D key-point estimation of joint positions on an egocentric image, captured by a depth sensor, and lifted to 2.5D using the corresponding depth values. Our contributions are two fold: (a) We discuss data labeling an…
We study embedded Binarized Neural Networks (eBNNs) with the aim of allowing current binarized neural networks (BNNs) in the literature to perform feedforward inference efficiently on small embedded devices. We focus on minimizing the required memory footprint, given that these devices often have memory as small as tens of kilobytes (KB). Beyond minimizing the memory required to store weights, as in a BNN, we show that it is essential to minimize the memory used for temporaries which hold intermediate results between layers in feedforward inference. To accomplish this, eBNN reorders the comput…
Purdue University（普渡大学）；Microsoft Corp（微软公司）；Indian Institute of Technology Madras（印度理工学院马德拉斯分校）；Adobe Research（奥多比研究院）
Videos take a lot of time to transport over the network, hence running analytics on the live video on embedded or mobile devices has become an important system driver. Considering that such devices, e.g., surveillance cameras or AR/VR gadgets, are resource constrained, creating lightweight deep neural networks (DNNs) for embedded devices is crucial. None of the current approximation techniques for object classification DNNs can adapt to changing runtime conditions, e.g., changes in resource availability on the device, the content characteristics, or requirements from the user. In this paper, w…
Industrial Systems Institute, ATHENA Research Center（雅典娜研究中心工业系统研究所）
Delineation approaches provide significant benefits to various domains, including agriculture, environmental and natural disasters monitoring. Most of the work in the literature utilize traditional segmentation methods that require a large amount of computational and storage resources. Deep learning has transformed computer vision and dramatically improved machine translation, though it requires massive dataset for training and significant resources for inference. More importantly, energy-efficient embedded vision hardware delivering real-time and robust performance is crucial in the aforement…
Online hand gesture recognition (HGR) techniques are essential in augmented reality (AR) applications for enabling natural human-to-computer interaction and communication. In recent years, the consumer market for low-cost AR devices has been rapidly growing, while the technology maturity in this domain is still limited. Those devices are typical of low prices, limited memory, and resource-constrained computational units, which makes online HGR a challenging problem. To tackle this problem, we propose a lightweight and computationally efficient HGR framework, namely LE-HGR, to enable real-time …
