In this paper we are interested to learn from a wireless digitally modulated signal the number of antennas that the transmitter (Tx) of this signal uses, as well as its specific modulation scheme (from phase-shift keying (PSK) or quadrature amplitude modulation (QAM)). Formally, these are modulation and antenna classification problems. We examine the problems with data-driven machine learning (ML)-based techniques. The two sub-problems of modulation and number of transmitter antenna classification are initially examined independently for a variety for system parameters, namely the SNR, number of receiver (Rx) antennas, and classification algorithms. Then we consider the joint problem where we follow two approaches. One, where the sub-problems are solved independently and in parallel, and one where the antenna classifier waits on the result of the modulation classifier. The two proposed schemes do not require any knowledge/details of the used modulation schemes and the way the Tx antennas are used (spatial multiplexing, space-time codes,etc.) as it is fully data-driven and not decision-theoretic based. The results of our approach are characterized by high classification accuracy and they pave the way for more ML-based data-driven techniques that reveal more characteristics of the Tx.
In this paper, we study the performance of spatial modulation based on reconfigurable antennas. Two main contributions are provided. We introduce an analytical framework to compute the error probability, which is shown to be accurate and useful for system optimization. We design and implement the prototype of a reconfigurable antenna that is specifically designed for application to spatial modulation, and that provides multiple radiation patterns that are used to encode the information bits. By using the measured antenna radiation patterns, we show that spatial modulation based on reconfigurab…
Reconfigurable Antennas for Next-Generation Wireless Communications: Technologies, Prototypes, Architectures, and Signal Processing
School of Engineering, the University of British Columbia（不列颠哥伦比亚大学工程学院）；CEMSE, King Abdullah University of Science and Technology（阿卜杜拉国王科技大学计算机、电气和数学科学与工程学院）
We introduce a new technique for secure wireless applications using a single dynamic antenna. The dynamic antenna supports a constantly changing current distribution that generates a radiation pattern that is static in a desired direction and dynamic elsewhere, thereby imparting additional modulation on the signal and obscuring information transmitted or received outside of the secure spatial region. Dynamic currents are supported by a single feed that is switched between separate ports on a single antenna, generating two different radiation patterns. We introduce the theoretical concept by ex…
Traditional directional modulation (DM) designs are based on the assumption that there is no multi-path effect between transmitters and receivers. One problem with these designs is that the resultant systems will be vulnerable to eavesdroppers which are aligned with or very close to the desired directions, as the received modulation pattern at these positions is similar to the given one. To solve the problem, a two-ray multi-path model is studied for positional modulation and the coefficients design problem for a given array geometry and a location-optimised antenna array is solved, where the …
The proliferation of wireless devices in recent years has caused a spectrum shortage, which led the scientific community to explore the potential of using terahertz (THz) communications. However, THz systems suffer from severe path attenuation, blockage, and antenna misalignment. In this paper, we present a relay-based blockage and antenna misalignment mitigation approach. In more detail, two relay selection policies are employed, namely best and random relay selection. The system performance under both policies is evaluated and compared in terms of average throughput and the probability that …
In this paper, a two-dimensional cylindrical Lens antenna based on the parallel plate technique is designed. It supports beam-steering capability of 58 degree at 28 GHz. The antenna is composed of low loss rectangular waveguide antennas, which are positioned around a homogeneous cylindrical Teflon lens in the air region of two conducting parallel plates. The Beam scanning can be achieved by switching between the antenna elements. The main advantages of our design include its relative simplicity, ease of fabrication, and high-power handling capability. Compared to previous works including a cur…
Generalized code index modulation-aided frequency offset realign multiple-antenna spatial modulation approach for next-generation green communication systems
A new method of angle estimation of multiple targets using a distributed interferometric antenna array and wideband space-time modulation is presented in this work. Interferometric array measurements of angle of arrival are generally ambiguous in the presence of one or more targets. We propose a new method of mitigating ambiguities in interferometric measurements by multiplying the angle pseudo-spectra from multiple antenna baselines, resulting in detections at only the angles of the targets. Using a single linear frequency modulated (LFM) transmitter and a receive interferometric array with $…
This paper analyzes transmit antenna selection (TAS) under Rayleigh flat fading for BPSK/QPSK modulations in multiple-input multiple-output wiretap channels, also termed as multiple-input multiple-output multiple-eavesdropper (MIMOME) channels. In our protocol, a single antenna is selected to transmit the secret message and selection combing (SC) or maximal-ratio combing (MRC) is utilized at the legitimate receiver or the eavesdropper. Novel closed-form expressions for the ergodic secrecy rates are derived to approximate the exact values, which hold high precision and compact forms. Besides th…
In this paper, for the first time, we propose two new solutions to boost the data rate between small connected objects such as glasses and cams and the 5th generation (5G) mobile network, based on spatial modulation, single carrier waveform, compact reconfigurable antennas at the object side and massive multiple input multiple output (M-MIMO) at the network side. In the first new wireless communication system, a "transmitting object" uses transmit spatial modulation with a compact reconfigurable antenna and a constant envelop amplifier to transmit in high data rate with a low complexity and lo…
The paper proposes a new technique that substantially improves blind digital modulation identification (DMI) algorithms that are based on higher-order statistics (HOS). The proposed technique takes advantage of noise power estimation to make an offset on higher-order moments (HOM), thus getting an estimate of noise-free HOM. When tested for multiple-antenna systems, the proposed method outperforms other DMI algorithms, in terms of identification accuracy, that are based only on cumulants or do not consider HOM denoising, even for a receiver with impairments. The improvement is achieved with th…
Wireless capsule endoscopy (WCE) systems are used to capture images of the human digestive tract for medical applications. The antenna is one of the most important components in a WCE system. In this paper, we provide novel small antenna solutions for a WCE system operating at the 433 MHz ISM band. The in-body capsule transmitter uses an ultrawideband outer-wall conformal loop antenna, whereas the on-body receiver uses a printed monopole antenna with a partial ground plane. A colon-equivalent tissue phantom and CST Gustav voxel human body model were used for the numerical studies of the capsul…
A button sensor antenna for wireless medical body area networks (WMBAN) is presented, which works through the IEEE 802.11b/g/n standard. Due to strong interaction between the sensor antenna and the body, an innovative robust system is designed with a small footprint that can serve on- and off-body healthcare applications. The measured and simulated results are in good agreement. The design offers a wide range of omnidirectional radiation patterns in free space, with a reflection coefficient (S11) of -29.30 (-30.97) dB in the lower (upper) bands. S11 reaches up to -23.07 (-27.07) dB and -30.76 …
Antenna Elements' Trajectory Optimization for Throughput Maximization in Continuous-Trajectory Fluid Antenna-Aided Wireless Communications
National Key Laboratory of Wireless Communications, University of Electronic Science and Technology of China（电子科技大学无线通信国家重点实验室）；School of Electrical and Electronic Engineering, Nanyang Technological University（南洋理工大学电气与电子工程学院）；Department of Electronic and Electrical Engineering, University College London（伦敦大学学院电子与电气工程系）；Department of Electronic Engineering, Kyung Hee University（庆熙大学电子工程系）；Department of Electronics and Information Convergence Engineering, Kyung Hee University（庆熙大学电子与信息融合工程系）
Channel static antennas are considered for mobile devices. The antenna keeps the wireless communication channel static by performing a counter-movement that is opposed to movements of the device that might be caused by a user. The feasibility of the concept is demonstrated for linear movement in an office environment. Channel measurements are performed with quarter wavelength monopole antennas in the 2.4GHz ISM frequency band. A channel model for the wireless communication channel of mobile devices with channel static antennas is proposed based on these measurement results.
This paper studies the performance of single-input multiple-output (SIMO) systems under receive antenna selection (RAS) and BPSK/QPSK modulations. At the receiver, a subset of branches are selected and combined using maximal-ratio combining (MRC) to maximize the instantaneous Signal to Noise Ratio (SNR). By assuming independent and identical distributed (i.i.d.) Rayleigh flat fading, a closed-form expression, with considerably high precision, is developed to approximate the average input-output mutual information, also termed as symmetric capacity, of the whole system. Later, this approximated…
Internal oscillations in switched antenna transmitters cause undesirable fluctuations of the stored energy in the system, reducing the effectiveness of time-varying broadbanding methods, such as energy-synchronous direct antenna modulation. To mitigate these parasitic oscillations, a modified direct antenna modulation system with an auxiliary DC source is introduced to stabilize energy storage on the antenna. A detailed circuit model for a direct antenna modulation system is used to identify the origin of the oscillations and to justify the selection of the DC source. Measured phase shift keye…
Adant Technologies Inc.（Adant科技公司）；Università di Padova（帕多瓦大学）；Consiglio Nazionale delle Ricerche (CNR)（意大利国家研究委员会）
The paper targets the problem of human motion detection using Wireless Local Area Network devices (WiFi) equipped with pattern reconfigurable antennas. Motion sensing is obtained by monitoring the body-induced alterations of the ambient WiFi signals originated from smart antennas supporting the beam-steering technology, thus allowing to channelize the antenna radiation pattern to pre-defined spots of interest. We first discuss signal and Channel State Information (CSI) processing and sanitization. Next, we describe the motion detection algorithm based on Angle-of-Arrival (AoA) monitoring. Prop…
Modulation recognition using deep neural networks has shown promising advantages over conventional algorithms. However, most existing research focuses on single receive antenna. In this paper, two end-to-end feature learning deep architectures are introduced for modulation recognition with multiple receive antennas. The first is based on multi-view convolutional neural network by treating signals from different receive antennas as different views of a 3D object and designing the location and operation of view-pooling layer that are suitable for feature fusion of multi-antenna signals. Consider…
