Cuts in graphs are a fundamental object of study, and play a central role in the study of graph algorithms. The problem of sparsifying a graph while approximately preserving its cut structure has been extensively studied and has many applications. In a seminal work, Benczúr and Karger (1996) showed that given any $n$-vertex undirected weighted graph $G$ and a parameter $\varepsilon \in (0,1)$, there is a near-linear time algorithm that outputs a weighted subgraph $G'$ of $G$ of size $\tilde{O}(n/\varepsilon^2)$ such that the weight of every cut in $G$ is preserved to within a $(1 \pm \varepsilon)$-factor in $G'$. The graph $G'$ is referred to as a {\em $(1 \pm \varepsilon)$-approximate cut sparsifier} of $G$.
A natural question is if such cut-preserving sparsifiers also exist for hypergraphs. Kogan and Krauthgamer (2015) initiated a study of this question and showed that given any weighted hypergraph $H$ where the cardinality of each hyperedge is bounded by $r$, there is a polynomial-time algorithm to find a $(1 \pm \varepsilon)$-approximate cut sparsifier of $H$ of size $\tilde{O}(\frac{nr}{\varepsilon^2})$. Since $r$ can be as large as $n$, in general, this gives a hypergraph cut sparsifier of size $\tilde{O}(n^2/\varepsilon^2)$, which is a factor $n$ larger than the Benczúr-Karger bound for graphs. It has been an open question whether or not Benczúr-Karger bound is achievable on hypergraphs. In this work, we resolve this question in the affirmative by giving a new polynomial-time algorithm for creating hypergraph sparsifiers of size $\tilde{O}(n/\varepsilon^2)$.
Graph sparsification has been studied extensively over the past two decades, culminating in spectral sparsifiers of optimal size (up to constant factors). Spectral hypergraph sparsification is a natural analogue of this problem, for which optimal bounds on the sparsifier size are not known, mainly because the hypergraph Laplacian is non-linear, and thus lacks the linear-algebraic structure and tools that have been so effective for graphs. Our main contribution is the first algorithm for constructing $ε$-spectral sparsifiers for hypergraphs with $O^*(n)$ hyperedges, where $O^*$ suppresses $(ε^{…
Cut and spectral sparsification of graphs have numerous applications, including e.g. speeding up algorithms for cuts and Laplacian solvers. These powerful notions have recently been extended to hypergraphs, which are much richer and may offer new applications. However, the current bounds on the size of hypergraph sparsifiers are not as tight as the corresponding bounds for graphs. Our first result is a polynomial-time algorithm that, given a hypergraph on $n$ vertices with maximum hyperedge size $r$, outputs an $ε$-spectral sparsifier with $O^*(nr)$ hyperedges, where $O^*$ suppresses $(ε^{-1} …
We study vertex cut and flow sparsifiers that were recently introduced by Moitra, and Leighton and Moitra. We improve and generalize their results. We give a new polynomial-time algorithm for constructing O(log k / log log k) cut and flow sparsifiers, matching the best existential upper bound on the quality of a sparsifier, and improving the previous algorithmic upper bound of O(log^2 k / log log k). We show that flow sparsifiers can be obtained from linear operators approximating minimum metric extensions. We introduce the notion of (linear) metric extension operators, prove that they exist, …
The problem of sparsifying a graph or a hypergraph while approximately preserving its cut structure has been extensively studied and has many applications. In a seminal work, Benczúr and Karger (1996) showed that given any $n$-vertex undirected weighted graph $G$ and a parameter $\varepsilon \in (0,1)$, there is a near-linear time algorithm that outputs a weighted subgraph $G'$ of $G$ of size $\tilde{O}(n/\varepsilon^2)$ such that the weight of every cut in $G$ is preserved to within a $(1 \pm \varepsilon)$-factor in $G'$. The graph $G'$ is referred to as a {\em $(1 \pm \varepsilon)$-approxima…
A sparsifier of a graph $G$ (Benczúr and Karger; Spielman and Teng) is a sparse weighted subgraph $\tilde G$ that approximately retains the cut structure of $G$. For general graphs, non-trivial sparsification is possible only by using weighted graphs in which different edges have different weights. Even for graphs that admit unweighted sparsifiers, there are no known polynomial time algorithms that find such unweighted sparsifiers. We study a weaker notion of sparsification suggested by Oveis Gharan, in which the number of edges in each cut $(S,\bar S)$ is not approximated within a multiplicat…
Given an undirected graph $G=(V,E)$ with edge capacities $c_e\geq 1$ for $e\in E$ and a subset $T$ of $k$ vertices called terminals, we say that a graph $H$ is a quality-$q$ cut sparsifier for $G$ iff $T\subseteq V(H)$, and for any partition $(A,B)$ of $T$, the values of the minimum cuts separating $A$ and $B$ in graphs $G$ and $H$ are within a factor $q$ from each other. We say that $H$ is a quality-$q$ flow sparsifier for $G$ iff $T\subseteq V(H)$, and for any set $D$ of demands over the terminals, the values of the minimum edge congestion incurred by fractionally routing the demands in $D$ …
We devise new cut sparsifiers that are related to the classical sparsification of Nagamochi and Ibaraki [Algorithmica, 1992], which is an algorithm that, given an unweighted graph $G$ on $n$ nodes and a parameter $k$, computes a subgraph with $O(nk)$ edges that preserves all cuts of value up to $k$. We put forward the notion of a friendly cut sparsifier, which is a minor of $G$ that preserves all friendly cuts of value up to $k$, where a cut in $G$ is called friendly if every node has more edges connecting it to its own side of the cut than to the other side. We present an algorithm that, give…
Recently, Chalermsook et al. [SODA'21(arXiv:2007.07862)] introduces a notion of vertex sparsifiers for $c$-edge connectivity, which has found applications in parameterized algorithms for network design and also led to exciting dynamic algorithms for $c$-edge st-connectivity [Jin and Sun FOCS'21(arXiv:2004.07650)]. We study a natural extension called vertex sparsifiers for $c$-hyperedge connectivity and construct a sparsifier whose size matches the state-of-the-art for normal graphs. More specifically, we show that, given a hypergraph $G=(V,E)$ with $n$ vertices and $m$ hyperedges with $k$ term…
A motif is a frequently occurring subgraph of a given directed or undirected graph $G$. Motifs capture higher order organizational structure of $G$ beyond edge relationships, and, therefore, have found wide applications such as in graph clustering, community detection, and analysis of biological and physical networks to name a few. In these applications, the cut structure of motifs plays a crucial role as vertices are partitioned into clusters by cuts whose conductance is based on the number of instances of a particular motif, as opposed to just the number of edges, crossing the cuts. In this …
We study the following version of cut sparsification. Given a large edge-weighted network $G$ with $k$ terminal vertices, compress it into a smaller network $H$ with the same terminals, such that every minimum terminal cut in $H$ approximates the corresponding one in $G$, up to a factor $q\geq 1$ that is called the quality. (The case $q=1$ is known also as a mimicking network). We provide new insights about the structure of minimum terminal cuts, leading to new results for cut sparsifiers of planar graphs. Our first contribution identifies a subset of the minimum terminal cuts, which we call e…
In recent years, hypergraph generalizations of many graph cut problems have been introduced and analyzed as a way to better explore and understand complex systems and datasets characterized by multiway relationships. Recent work has made use of a generalized hypergraph cut function which for a hypergraph $\mathcal{H} = (V,E)$ can be defined by associating each hyperedge $e \in E$ with a splitting function ${\bf w}_e$, which assigns a penalty to each way of separating the nodes of $e$. When each ${\bf w}_e$ is a submodular cardinality-based splitting function, meaning that ${\bf w}_e(S) = g(|S|…
In this paper, we consider the problem of designing cut sparsifiers and sketches for directed graphs. To bypass known lower bounds, we allow the sparsifier/sketch to depend on the balance of the input graph, which smoothly interpolates between undirected and directed graphs. We give nearly matching upper and lower bounds for both for-all (cf. Benczúr and Karger, STOC 1996) and for-each (Andoni et al., ITCS 2016) cut sparsifiers/sketches as a function of cut balance, defined the maximum ratio of the cut value in the two directions of a directed graph (Ene et al., STOC 2016). We also show an int…
We present an algorithm that given any $n$-vertex, $m$-edge, rank $r$ hypergraph constructs a spectral sparsifier with $O(n \varepsilon^{-2} \log n \log r)$ hyperedges in nearly-linear $\widetilde{O}(mr)$ time. This improves in both size and efficiency over a line of work (Bansal-Svensson-Trevisan 2019, Kapralov-Krauthgamer-Tardos-Yoshida 2021) for which the previous best size was $O(\min\{n \varepsilon^{-4} \log^3 n,nr^3 \varepsilon^{-2} \log n\})$ and runtime was $\widetilde{O}(mr + n^{O(1)})$. Independent Result: In an independent work, Lee (Lee 2022) also shows how to compute a spectral hy…
The notion of vertex sparsification is introduced in \cite{M}, where it was shown that for any graph $G = (V, E)$ and a subset of $k$ terminals $K \subset V$, there is a polynomial time algorithm to construct a graph $H = (K, E_H)$ on just the terminal set so that simultaneously for all cuts $(A, K-A)$, the value of the minimum cut in $G$ separating $A$ from $K -A$ is approximately the same as the value of the corresponding cut in $H$. We give the first super-constant lower bounds for how well a cut-sparsifier $H$ can simultaneously approximate all minimum cuts in $G$. We prove a lower bound o…
We present a general framework of designing efficient dynamic approximate algorithms for optimization on undirected graphs. In particular, we develop a technique that, given any problem that admits a certain notion of vertex sparsifiers, gives data structures that maintain approximate solutions in sub-linear update and query time. We illustrate the applicability of our paradigm to the following problems. (1) A fully-dynamic algorithm that approximates all-pair maximum-flows/minimum-cuts up to a nearly logarithmic factor in $\tilde{O}(n^{2/3})$ amortized time against an oblivious adversary, and…
Given an unweighted tree $T=(V,E)$ with terminals $K \subset V$, we show how to obtain a $2$-quality vertex flow and cut sparsifier $H$ with $V_H = K$. We prove that our result is essentially tight by providing a $2-o(1)$ lower-bound on the quality of any cut sparsifier for stars. In addition we give improved results for quasi-bipartite graphs. First, we show how to obtain a $2$-quality flow sparsifier with $V_H = K$ for such graphs. We then consider the other extreme and construct exact sparsifiers of size $O(2^{k})$, when the input graph is unweighted.
Given an edge-weighted graph $G$ with a set $Q$ of $k$ terminals, a mimicking network is a graph with the same set of terminals that exactly preserves the sizes of minimum cuts between any partition of the terminals. A natural question in the area of graph compression is to provide as small mimicking networks as possible for input graph $G$ being either an arbitrary graph or coming from a specific graph class. In this note we show an exponential lower bound for cut mimicking networks in planar graphs: there are edge-weighted planar graphs with $k$ terminals that require $2^{k-2}$ edges in any …
Graph Sparsification aims at compressing large graphs into smaller ones while preserving important characteristics of the input graph. In this work we study Vertex Sparsifiers, i.e., sparsifiers whose goal is to reduce the number of vertices. We focus on the following notions: (1) Given a digraph $G=(V,E)$ and terminal vertices $K \subset V$ with $|K| = k$, a (vertex) reachability sparsifier of $G$ is a digraph $H=(V_H,E_H)$, $K \subset V_H$ that preserves all reachability information among terminal pairs. In this work we introduce the notion of reachability-preserving minors (RPMs) , i.e., we…
Let $G$ be a graph and $S, T \subseteq V(G)$ be (possibly overlapping) sets of terminals, $|S|=|T|=k$. We are interested in computing a vertex sparsifier for terminal cuts in $G$, i.e., a graph $H$ on a smallest possible number of vertices, where $S \cup T \subseteq V(H)$ and such that for every $A \subseteq S$ and $B \subseteq T$ the size of a minimum $(A,B)$-vertex cut is the same in $G$ as in $H$. We assume that our graphs are unweighted and that terminals may be part of the min-cut. In previous work, Kratsch and Wahlström (FOCS 2012/JACM 2020) used connections to matroid theory to show tha…
We present the first single pass algorithm for computing spectral sparsifiers of graphs in the dynamic semi-streaming model. Given a single pass over a stream containing insertions and deletions of edges to a graph G, our algorithm maintains a randomized linear sketch of the incidence matrix of G into dimension O((1/epsilon^2) n polylog(n)). Using this sketch, at any point, the algorithm can output a (1 +/- epsilon) spectral sparsifier for G with high probability. While O((1/epsilon^2) n polylog(n)) space algorithms are known for computing "cut sparsifiers" in dynamic streams [AGM12b, GKP12] a…
A seminal work of [Ahn-Guha-McGregor, PODS'12] showed that one can compute a cut sparsifier of an unweighted undirected graph by taking a near-linear number of linear measurements on the graph. Subsequent works also studied computing other graph sparsifiers using linear sketching, and obtained near-linear upper bounds for spectral sparsifiers [Kapralov-Lee-Musco-Musco-Sidford, FOCS'14] and first non-trivial upper bounds for spanners [Filtser-Kapralov-Nouri, SODA'21]. All these linear sketching algorithms, however, only work on unweighted graphs. In this paper, we initiate the study of weighted…
We initiate the study of dynamic algorithms for graph sparsification problems and obtain fully dynamic algorithms, allowing both edge insertions and edge deletions, that take polylogarithmic time after each update in the graph. Our three main results are as follows. First, we give a fully dynamic algorithm for maintaining a $ (1 \pm ε) $-spectral sparsifier with amortized update time $poly(\log{n}, ε^{-1})$. Second, we give a fully dynamic algorithm for maintaining a $ (1 \pm ε) $-cut sparsifier with \emph{worst-case} update time $poly(\log{n}, ε^{-1})$. Both sparsifiers have size $ n \cdot po…
A spectral sparsifier of a graph $G$ is a sparser graph $H$ that approximately preserves the quadratic form of $G$, i.e. for all vectors $x$, $x^T L_G x \approx x^T L_H x$, where $L_G$ and $L_H$ denote the respective graph Laplacians. Spectral sparsifiers generalize cut sparsifiers, and have found many applications in designing graph algorithms. In recent years, there has been interest in computing spectral sparsifiers in semi-streaming and dynamic settings. Natural algorithms in these settings often involve repeated sparsification of a graph, and accumulation of errors across these steps. We …
Designing dynamic graph algorithms against an adaptive adversary is a major goal in the field of dynamic graph algorithms. While a few such algorithms are known for spanning trees, matchings, and single-source shortest paths, very little was known for an important primitive like graph sparsifiers. The challenge is how to approximately preserve so much information about the graph (e.g., all-pairs distances and all cuts) without revealing the algorithms' underlying randomness to the adaptive adversary. In this paper we present the first non-trivial efficient adaptive algorithms for maintaining s…
A cut $\varepsilon$-sparsifier of a weighted graph $G$ is a re-weighted subgraph of $G$ of (quasi)linear size that preserves the size of all cuts up to a multiplicative factor of $\varepsilon$. Since their introduction by Benczúr and Karger [STOC'96], cut sparsifiers have proved extremely influential and found various applications. Going beyond cut sparsifiers, Filtser and Krauthgamer [SIDMA'17] gave a precise classification of which binary Boolean CSPs are sparsifiable. In this paper, we extend their result to binary CSPs on arbitrary finite domains.
In this paper we give a construction of cut sparsifiers of Benczur and Karger in the {\em dynamic} streaming setting in a single pass over the data stream. Previous constructions either required multiple passes or were unable to handle edge deletions. We use $\tilde{O}(1/\e^2)$ time for each stream update and $\tilde{O}(n/\e^2)$ time to construct a sparsifier. Our $\e$-sparsifiers have $O(n\log^3 n/\e^2)$ edges. The main tools behind our result are an application of sketching techniques of Ahn et al.[SODA'12] to estimate edge connectivity together with a novel application of sampling with limi…
We study treewidth sparsifiers. Informally, given a graph $G$ of treewidth $k$, a treewidth sparsifier $H$ is a minor of $G$, whose treewidth is close to $k$, $|V(H)|$ is small, and the maximum vertex degree in $H$ is bounded. Treewidth sparsifiers of degree $3$ are of particular interest, as routing on node-disjoint paths, and computing minors seems easier in sub-cubic graphs than in general graphs. In this paper we describe an algorithm that, given a graph $G$ of treewidth $k$, computes a topological minor $H$ of $G$ such that (i) the treewidth of $H$ is $Ω(k/\text{polylog}(k))$; (ii) $|V(H)…
Given a large edge-capacitated network $G$ and a subset of $k$ vertices called terminals, an (exact) flow sparsifier is a small network $G'$ that preserves (exactly) all multicommodity flows that can be routed between the terminals. Flow sparsifiers were introduced by Leighton and Moitra [STOC 2010], and have been studied and used in many algorithmic contexts. A fundamental question that remained open for over a decade, asks whether every $k$-terminal network admits an exact flow sparsifier whose size is bounded by some function $f(k)$ (regardless of the size of $G$ or its capacities). We reso…
A cut sparsifier is a reweighted subgraph that maintains the weights of the cuts of the original graph up to a multiplicative factor of $(1\pmε)$. This paper considers computing cut sparsifiers of weighted graphs of size $O(n\log (n)/ε^2)$. Our algorithm computes such a sparsifier in time $O(m\cdot\min(α(n)\log(m/n),\log (n)))$, both for graphs with polynomially bounded and unbounded integer weights, where $α(\cdot)$ is the functional inverse of Ackermann's function. This improves upon the state of the art by Benczúr and Karger (SICOMP 2015), which takes $O(m\log^2 (n))$ time. For unbounded we…
Given a weighted graph $G$ and an error parameter $ε> 0$, the {\em graph sparsification} problem requires sampling edges in $G$ and giving the sampled edges appropriate weights to obtain a sparse graph $G_ε$ (containing O(n\log n) edges in expectation) with the following property: the weight of every cut in $G_ε$ is within a factor of $(1\pm ε)$ of the weight of the corresponding cut in $G$. We provide a generic framework that sets out sufficient conditions for any particular sampling scheme to result in good sparsifiers, and obtain a set of results by simple instantiations of this framework. …
In vertex-cut sparsification, given a graph $G=(V,E)$ with a terminal set $T\subseteq V$, we wish to construct a graph $G'=(V',E')$ with $T\subseteq V'$, such that for every two sets of terminals $A,B\subseteq T$, the size of a minimum $(A,B)$-vertex-cut in $G'$ is the same as in $G$. In the most basic setting, $G$ is unweighted and undirected, and we wish to bound the size of $G'$ by a function of $k=|T|$. Kratsch and Wahlström [JACM 2020] proved that every graph $G$ (possibly directed), admits a vertex-cut sparsifier $G'$ with $O(k^3)$ vertices, which can in fact be constructed in randomized…
We study the problem of sketching an input graph, so that given the sketch, one can estimate the weight of any cut in the graph within factor $1+ε$. We present lower and upper bounds on the size of a randomized sketch, focusing on the dependence on the accuracy parameter $ε>0$. First, we prove that for every $ε> 1/\sqrt n$, every sketch that succeeds (with constant probability) in estimating the weight of all cuts $(S,\bar S)$ in an $n$-vertex graph (simultaneously), must be of size $Ω(n/ε^2)$ bits. In the special case where the sketch is itself a weighted graph (which may or may not be a subg…
In a hypergraph on $n$ vertices where $D$ is the maximum size of a hyperedge, there is a weighted hypergraph spectral $\varepsilon$-sparsifier with at most $O(\varepsilon^{-2} \log(D) \cdot n \log n)$ hyperedges. This improves over the bound of Kapralov, Krauthgamer, Tardos and Yoshida (2021) who achieve $O(\varepsilon^{-4} n (\log n)^3)$, as well as the bound $O(\varepsilon^{-2} D^3 n \log n)$ obtained by Bansal, Svensson, and Trevisan (2019). The same sparsification result was obtained independently by Jambulapati, Liu, and Sidford (2022).
For an undirected/directed hypergraph $G=(V,E)$, its Laplacian $L_G\colon\mathbb{R}^V\to \mathbb{R}^V$ is defined such that its ``quadratic form'' $\boldsymbol{x}^\top L_G(\boldsymbol{x})$ captures the cut information of $G$. In particular, $\boldsymbol{1}_S^\top L_G(\boldsymbol{1}_S)$ coincides with the cut size of $S \subseteq V$, where $\boldsymbol{1}_S \in \mathbb{R}^V$ is the characteristic vector of $S$. A weighted subgraph $H$ of a hypergraph $G$ on a vertex set $V$ is said to be an $ε$-spectral sparsifier of $G$ if $(1-ε)\boldsymbol{x}^\top L_H(\boldsymbol{x}) \leq \boldsymbol{x}^\top …
We study algorithmic and structural aspects of connectivity in hypergraphs. Given a hypergraph $H=(V,E)$ with $n = |V|$, $m = |E|$ and $p = \sum_{e \in E} |e|$ the best known algorithm to compute a global minimum cut in $H$ runs in time $O(np)$ for the uncapacitated case and in $O(np + n^2 \log n)$ time for the capacitated case. We show the following new results. 1. Given an uncapacitated hypergraph $H$ and an integer $k$ we describe an algorithm that runs in $O(p)$ time to find a subhypergraph $H'$ with sum of degrees $O(kn)$ that preserves all edge-connectivities up to $k$ (a $k$-sparsifier)…
Given a capacitated graph $G = (V,E)$ and a set of terminals $K \subseteq V$, how should we produce a graph $H$ only on the terminals $K$ so that every (multicommodity) flow between the terminals in $G$ could be supported in $H$ with low congestion, and vice versa? (Such a graph $H$ is called a flow-sparsifier for $G$.) What if we want $H$ to be a "simple" graph? What if we allow $H$ to be a convex combination of simple graphs? Improving on results of Moitra [FOCS 2009] and Leighton and Moitra [STOC 2010], we give efficient algorithms for constructing: (a) a flow-sparsifier $H$ that maintains …
