Since the inevitability in experimental synthesis, defects show great importance to many materials. They will deeply regulate the properties of the materials, and then affect the further applications. Thus, exploring the effects of defects on the properties of materials is desired. Here, by using first-principles calculations, we systematically studied the effect of silicon vacancy defects on the properties of silicene generated on Nterminated cubic boron nitride (111) surface. It is found that the introduction of silicon vacancy would trigger transition between half-metal and ferromagnetic semiconductor. With small vacancy ratios of 1/36 and 1/24, the ground-state of the samples would behave as ferromagnetic semiconductors, and the band gaps are about 1.25 and 0.95 eV, respectively. When the vacancy ratio is increased up to 1/6, the sample would turn into a ferromagnetic half-metal with a half-metallic gap of around 0.15 eV. The change of the electronic structure of the samples is driven by the different electron transfer between silicon layer and substrate, i.e., there will be different amount of electrons transferred from the silicon layer to the substrate when the vacancy ratio is altered. This work would open a new way to regulate the properties of materials and extend applications in nanoelectronic field.
The two-dimensional silicon allotrope, silicene, could spur the development of new and original concepts in Si-based nanotechnology. Up to now silicene can only be epitaxially synthesized on a supporting substrate such as Ag(111). Even though the structural and electronic properties of these epitaxial silicene layers have been intensively studied, very little is known about its vibrational characteristics. Here, we present a detailed study of epitaxial silicene on Ag(111) using \textit{in situ} Raman spectroscopy, which is one of the most extensively employed experimental techniques to charact…
Silicene, a counterpart of graphene, has achieved rapid development due to its exotic electronic properties and excellent compatibility with the mature silicon-based semiconductor technology. Its low room-temperature mobility of about 100 cm2V-1s-1, however, inhibits device applications such as in field-effect transistors. Generally, defects and grain boundaries would act as scattering centers and thus reduce the carrier mobility. In this paper, the morphologies of various point defects in epitaxial silicene on Ag(111) surfaces have been systematically investigated using first-principles calcu…
The origin of the large-scale stripe pattern of epitaxial silicene on the ZrB$_2$(0001) surface observed by scanning tunneling microscope experiments is revealed by first-principles calculations. Without stripes, the ($\sqrt{3}\times\sqrt{3}$)-reconstructed, one-atom-thick Si layer is found to exhibit a "zero-frequency" phonon instability at the $M$ point. In order to avoid a divergent response, the relevant phonon mode triggers the spontaneous formation of a new phase with a particular stripe pattern offering a way to lower both the atomic surface density and the total energy of silicene on t…
In this letter, we report that the special coupling between Dirac fermion and lattice vibrations, in other words, electron-phonon coupling (EPC), in silicene layers on Ag(111) surface was probed by an in-situ Raman spectroscopy. We find the EPC is significantly modulated due to tensile strain, which results from the lattice mismatch between silicene and the substrate, and the charge doping from the substrate. The special phonon modes corresponding to two-dimensional electron gas scattering at edge sites in the silicene were identified. Detecting relationship between EPC and Dirac fermion throu…
Graphene, consisting of an inert, thermally stable material with an atomically flat, dangling bond-free surface is by essence an ideal template layer for van der Waals heteroepitaxy of two-dimensional materials such as silicene. However, depending on the synthesis method and growth parameters, graphene (Gr) substrates could exhibit, on a single sample, various surface structures, thicknesses, defects, and step heights. These structures noticeably affect the growth mode of epitaxial layers, e.g. turning the layer-by-layer growth into the Volmer-Weber growth promoted by defect-assisted nucleatio…
Since the discovery of graphene, intensive efforts have been made in search of novel two-dimensional (2D) materials. Decreasing the materials dimensionality to their ultimate thinness is a promising route to unveil new physical phenomena, and potentially improve the performance of devices. Among recent 2D materials, analogs of graphene, the group IV elements have attracted much attention for their unexpected and tunable physical properties. Depending on the growth conditions and substrates, several structures of silicene, germanene, and stanene can be formed. Here, we report the synthesis of a…
For most practical applications in electronic devices, two-dimensional materials should be transferred onto semiconducting or insulating substrates, since they are usually generated on metallic substrates. However, the transfer often leads to wrinkles, damages, contaminations and so on which would destroy the intrinsic properties of samples. Thus, generating two-dimensional materials directly on nonmetallic substrates has been a desirable goal for a long time. Here, via a swarm structure search method and density functional theory, we employed an insulating N-terminated cubic boron nitride(111…
Silicene is one of the most promising 2D materials for the realization of next-generation electronic devices, owing to its high carrier mobility and bandgap tunability through the imposition of an external electric field. To exploit this fundamental characteristic, it is necessary to engineer an insulating layer that can be interfaced directly to silicene without perturbing its bidimensional nature. At the same time, this insulating layer should exhibit low leakage currents even when highly scaled, to fully exploit the advantages of using a 2D material at the core of the device. CaF$_2$ is kno…
Self healing mechanisms of vacancy defects in graphene and silicene are studied using first principles calculations. We investigated host adatom adsorption, diffusion, vacancy formation and revealed atomistic mechanisms in the healing of single, double and triple vacancies of single layer graphene and silicene. Silicon adatom, which is adsorbed to silicene at the top site forms a dumbbell like structure by pushing one Si atom underneath. The asymmetric reconstruction of the single vacancy in graphene is induced by the magnetization through the rebonding of two dangling bonds and acquiring a si…
Using atomic resolved scanning tunneling microscopy, we present here the experimental evidence of a silicene sheet (graphene like structure) epitaxially grown on a close-packed silver surface (Ag(111)). This has been achieved via direct condensation of a silicon atomic flux onto the single-crystal substrate in ultra-high vacuum conditions. A highly ordered silicon structure, arranged within a honeycomb lattice is synthesized and presenting two silicon sub-lattices occupying positions at different heights (0.02 nm) indicating possible sp2-sp3 hybridizations.
Epitaxial silicene, which is one single layer of silicon atoms packed in a honeycomb structure, demonstrates a strong interaction with the substrate that dramatically affects its electronic structure. The role of electronic coupling in the chemical reactivity between the silicene and the substrate is still unclear so far, which is of great importance for functionalization of silicene layers. Here, we report the reconstructions and hybridized electronic structures of epitaxial 4x4 silicene on Ag(111), which are revealed by scanning tunneling microscopy and angle-resolved photoemission spectrosc…
The transformation of the stripe domain structure of spontaneously-formed epitaxial silicene on ZrB$_2$ thin film into a single-domain driven by the adsorption of a fraction of a monolayer of silicon was used to investigate how dislocations react and eventually annihilate in a two-dimensional honeycomb structure. The in-situ real time STM monitoring of the evolution of the domain structure after Si deposition revealed the mechanisms leading to the nucleation of a single-domain into a domain structure through a stepwise reaction of partial dislocations. After its nucleation, the single-domain e…
We report results on the Young's modulus (YM) of defect-free and defective silicene nanoribbons (SNRs) as a function of length and temperature. In this study, we perform molecular dynamics simulations using the Environment-Dependent Interatomic Potential (EDIP) to describe the interaction of the Si atoms. We find that the Young's modulus of pristine and defective SNRs increases with the ribbon length in both chirality directions. It is shown that the Young's modulus of defective SNRs exhibit a complex dependence on the combinations of vacancies. With respect to temperature, we find that YM for…
Graphene, a flat monolayer of carbon atoms tightly packed into a two-dimensional honeycomb lattice (a one atom thick graphite sheet), is presently the hottest material in nanoscience and nanotechnology. Its challenging hypothetical reflection in the silicon world is coined silicene; Here, we have demonstrated that the silicon nano-wires self-aligned in a massively parallel array recently observed by STM on Ag(110), are true silicene nano-ribbons. Our calculations using density functional theory clearly show that Si atoms tends to form hexagons on top the silver substrate in a honeycomb, graphe…
Recent studies of core-level X-ray photoelectron spectroscopy (XPS) spectra of silicene on ZrB$_2$(0001) were found to be inconsistent with the density of states (DOS) of a planar-like structure that has been proposed as the ground state by density functional theory (DFT). To resolve the discrepancy, a reexamination of the XPS spectra and direct theoretical access of accurate single-particle excitation energies are desired. By analyzing the XPS data using symmetric Voigt functions, different binding energies and its sequence of Si $2p$ orbitals can be assigned from previously reported ones whe…
Silicene, as the silicon analog of graphene, has been successfully fabricated by epitaxial growing on various substrates. Similar to free-standing graphene, free-standing silicene possesses a honeycomb structure and Dirac-cone-shaped energy band, resulting in many fascinating properties such as high carrier mobility, quantum spin Hall effect, quantum anomalous Hall effect, and quantum valley Hall effect. The maintenance of the honeycomb crystal structure and the Dirac cone of silicene is crucial for observation of its intrinsic properties. In this review, we systematically discuss the substrat…
So far, it represents a challenging task to reproduce angle-resolved photoelectron (ARPES) spectra of epitaxial silicene by first-principles calculations. Here, we report on the resolution of the previously controversial issue related to the structural configuration of silicene on the ZrB$_2$(0001) surface and its band structure. In particular, by representing the band structure in a large Brillouin zone associated with a single Si atom, it is found that the imaginary part of the one-particle Green's function follows the spectral weight observed in ARPES spectra. By additionally varying the in…
We study the crystal reconstruction in the presence of monovacancies (MVs), divacancies (DVs) and linear vacancies (LVs) in a zigzag silicene nanoribbon (ZSiNR) with transversal symmetry. Their influence on the electric and thermoelectric properties is assessed by the density functional theory combined with the nonequilibrium Green's functions. In particular, we focus on the spin resolved conductance, magnetoresistance and current-voltage curves. A 5-atom-ring is formed in MVs, a 5-8-5 ring structure in DVs, and a 8-4-8-4 ring structure in LVs. The linear conductance becomes strongly spin depe…
In this Letter, we demonstrate that it is possible to form a two-dimensional (2D) silicene-like Si$_5$Ge compound by replacing the Si atoms occupying on-top sites in the planar-like structure of epitaxial silicene on ZrB$_2$(0001) by deposited Ge atoms. For coverages below 1/6 ML, the Ge deposition gives rise to a Si$_{6-x}$Ge$_{x}$ alloy (with $x$ between 0 and 1) in which the on-top sites are randomly occupied by Si or Ge atoms. The progressive increase of the valence band maximum with $x$ observed experimentally originates from a selective charge transfer from Ge atoms to Si atoms. These ac…
Silicene, a monolayer of silicon atoms tightly packed into a two-dimensional honeycomb lattice, is the challenging hypothetical reflection in the silicon realm of graphene, a one-atom thick graphite sheet, presently the hottest material in condensed matter physics. If existing, it would also reveal a cornucopia of new physics and potential applications. Here, we reveal the epitaxial growth of silicene stripes self-aligned in a massively parallel array on the anisotropic silver (110) surface. This crucial step in the silicene gold rush could give a new kick to silicon on the electronics road-ma…
Absence of the Dirac cone due to a strong band hybridization is revealed to be a common feature for epitaxial silicene on metal substrates according to our first-principles calculations for silicene on Ir, Cu, Mg, Au, Pt, Al, and Ag substrates. The destroyed Dirac cone of silicene, however, can be effectively restored with linear or parabolic dispersion by intercalating alkali metal atoms between silicene and the metal substrates, offering an opportunity to study the intriguing properties of silicene without further transfer of silicene from the metal substrates.
We study the interaction of H$_2$, O$_2$, CO, H$_2$O and OH molecules with the vacancy defects of graphene and silicene. Atoms around the bare vacancy reconstruct and specific chemically active sites are created. While H$_2$, O$_2$ and CO remain intact on both pristine graphene and silicene, these molecules can dissociate when they are placed at the close proximity of these chemically active sites and nucleate centers for the hydrogenation and oxygenation. Saturation of the dangling bonds at the defect sites by constituent atoms of dissociated molecules gives rise to significant modification o…
The main contribution of this paper is to study the spin caloritronic effects in defected graphene/silicene nanoribbon (GSNR) junctions. Each step-like GSNR is subjected to the ferromagnetic exchange and local external electric fields, and their responses are determined using the nonequilibrium Greens function (NEGF) approach. To further study the thermoelectric (TE) properties of the GSNRs, three defect arrangements of divacancies (DVs) are also considered for a larger system, and their responses are re-evaluated. The results demonstrate that the defected GSNRs with the DVs can provide an alm…
Silicene, the two-dimensional allotrope of silicon, is predicted to exist in a low-buckled honeycomb lattice, characterized by semimetallic electronic bands with graphenelike energy-momentum dispersions around the Fermi level (represented by touching Dirac cones). Single layers of silicene are mostly synthesized by depositing silicon on top of silver, where, however, the different phases observed to date are so strongly hybridized with the substrate that not only the Dirac cones, but also the whole valence and conduction states of ideal silicene appear to be lost. Here, we provide evidence tha…
Biaxial strain in coherent epitaxial thin films can have a pronounced effect on the point defect profile in the film material. Detailed fundamental knowledge of the interaction of strain with point defects is crucial in understanding the stoichiometry and resulting properties of strained thin films. Here we investigate the effect of biaxial strain on the formation energy of cation and anion vacancies using MnO as a model system. Our density functional theory calculations show that, as expected from local volume arguments, compressive strain favours the formation of cation vacancies. Interestin…
Wide bandgap (~3.1 eV) La-doped BaSnO3 (LBSO) has attracted increasing attention as one of the transparent oxide semiconductors since its bulk single crystal shows a high carrier mobility (~320 cm2 V-1 s-1) with a high carrier concentration (~10^20 cm-3). For this reason, many researchers have fabricated LBSO epitaxial films thus far, but the obtainable carrier mobility is substantially low compared to that of single crystals due to the formation of the lattice/structural defects. Here we report that the mobility suppression in LBSO films can be lifted by a simple vacuum annealing process. The…
We investigated SrFeO$_{3-x}$ thin films on a SrTiO$_3$ (001) substrate prepared via pulsed laser epitaxy using an optical spectroscopy technique. The oxygen vacancy level ($x$) was controlled by post-annealing processes at different oxygen partial pressures. We achieved a brownmillerite(BM) structure at $x =$ 0.5 and observed the evolution of the crystal structure from BM into perovskite(PV) as the oxygen concentration increased. We observed the evolution of infrared-active phonons with respect to the oxygen concentration, which was closely related to the structural evolution observed via X-r…
Reversible topotactic transitions between oxygen-vacancy-ordered structures in transition metal oxides provide a promising strategy for active manipulation of material properties. While transformations between various oxygen-deficient phases have been attained in bulk ABO$_{3-δ}$ perovskites, substrate clamping restricts the formation of distinct ordering patterns in epitaxial films. Using in-situ scanning transmission electron microscopy (STEM), we image a thermally driven reversible transition in La$_{0.5}$Sr$_{0.5}$CoO$_{3-δ}$ films on SrTiO$_3$ from a multidomain brownmillerite (BM) struct…
We evaluate the interplay between epitaxial strain and oxygen vacancy formation in the perovskite-structure oxide lanthanum aluminate, LaAlO$_3$. Using density functional theory within the GGA$+U$ approximation we calculate the dependence of the oxygen vacancy formation energy on the biaxial strain conditions. We find that the change in formation energy with strain is negligible over the range of strain values usually accessible through coherent epitaxial growth. Our findings suggest that experimental reports of different oxygen vacancy concentrations in strained films result from extrinsic fa…
Oxygen-defect control has long been considered an influential tuning knob for producing various property responses in complex oxide films. In addition to physical property changes, modification to the lattice structure, specifically lattice expansion, with increasing oxygen vacancy concentrations has been reported often and has become the convention for oxide materials. However, the current understanding of the lattice behavior in oxygen-deficient films becomes disputable when considering compounds containing different bonding environments or atomic layering. Moreover, tensile strain has recen…
The ability to manipulate oxygen anion defects rather than metal cations in complex oxides can facilitate creating new functionalities critical for emerging energy and device technologies. However, the difficulty in activating oxygen at reduced temperatures hinders the deliberate control of important defects, oxygen vacancies. Here, strontium cobaltite (SrCoOx) is used to demonstrate that epitaxial strain is a powerful tool for manipulating the oxygen vacancy concentration even under highly oxidizing environments and at annealing temperatures as low as 300 C. By applying a small biaxial tensil…
Ultrathin semiconductors present various novel electronic properties. The first experimental realized two-dimensional (2D) material is graphene. Searching 2D materials with heavy elements bring the attention to Si, Ge and Sn. 2D buckled Si-based silicene was realized by molecular beam epitaxy (MBE) growth1,2. Ge-based germanene was realized by mechanical exfoliation3. Sn-based stanene has its unique properties. Stanene and its derivatives can be 2D topological insulators (TI) with a very large band gap as proposed by first-principles calculations4, or can support enhanced thermoelectric perfor…
Physics-Informed Neural Network Surrogate for Oxygen Vacancy Dynamics in epitaxial $\mathrm{SrTiO_3}$ on Si memristors via Dynamic Spectral Optimization
Optical coupling of an ensemble of silicon-vacancy (SiV) centers to single-crystal diamond microdisk cavities is demonstrated. The cavities are fabricated from a single-crystal diamond membrane generated by ion implantation and, electrochemical liftoff followed by homo-epitaxial overgrowth. Whispering gallery modes which spectrally overlap with the zero-phonon line (ZPL) of the SiV centers and exhibit quality factors ~2200 are measured. Lifetime reduction from 1.8 ns to 1.48 ns is observed from SiV centers in the cavity compared to those in the membrane outside the cavity. These results are pi…
We generate silicon vacancy related defects in high-quality epitaxial silicon carbide layers by means of electron irradiation. By controlling the irradiation fluence, the defect concentration is varied over several orders of magnitude. We establish the excitation profile for optical pumping of these defects and evaluate the optimum excitation wavelength of 770 nm. We also measure the photoluminescence dynamics at room temperature and find a monoexponential decay with a characteristic lifetime of 6.1 ns. The integrated photoluminescence intensity depends linear on the excitation power density u…
Understanding the nature and behavior of vacancy-like defects in epitaxial GeSn metastable alloys is crucial to elucidate the structural and optoelectronic properties of these emerging semiconductors. The formation of vacancies and their complexes is expected to be promoted by the relatively low substrate temperature required for the epitaxial growth of GeSn layers with Sn contents significantly above the equilibrium solubility of 1 at.%. These defects can impact both the microstructure and charge carrier lifetime. Herein, to identify the vacancy-related complexes and probe their evolution as …
Thick, high-purity semi-insulating (SI)homoepitaxial layers on Si-face 4H-SiC weregrownsystematically, with resistivity \geq 109Ω-cmby maintaining high C/Si ratios 1.3-15 during growth.Comparison of secondary ion mass spectra betweenlow-dopedepilayers grown at C/Si ratio<1.3andSI-epilayers grown at C/Si ratio>1.3 showed little difference in residual impurity concentrations. A reconciliation of impurity concentration with measured resistivity indicated a compensating trap concentration of ~1015cm-3present only in the SI-epilayers. High- resolution photo induced transient spectroscopy (HRPITS) i…
We report on antiferroelectriclike double polarization hysteresis loops in multiferroic HoMnO3 thin films below the ferroelectric Curie temperature. This intriguing phenomenon is attributed to the domain pinning by defect dipoles which were introduced unintentionally during film growth process. Electron paramagnetic resonance suggests the existence of Fe1+ defects in thin films and first principles calculations reveal that the defect dipoles would be composed of oxygen vacancy and Fe1+ defect. We discuss migration of charged point defects during film growth process and formation of defect dipo…
The diffusion of Li in electrode materials is key factor to charging/discharging rate capacity of Li-ion battery (LIB). Recently, two-dimensional phosphorene has been proposed as a very promising electrode material due to its ultrafast and directional lithium diffusion, as well as large energy capacity. Here, on the basis of density functional theory, we report that the intrinsic point defects, including vacancy and stone-wales defects, will block the directional ultrafast diffusion of lithium in phosphorene. On the defect-free phosphorene, diffusion of Li along the zigzag lattice direction is…
With reduced degrees of freedom, structural defects are expected to play a greater role in two-dimensional materials in comparison to their bulk counterparts. In particular, mechanical strength, electronic properties, and chemical reactivity are strongly affected by crystal imperfections in the atomically thin limit. Here, ultra-high vacuum (UHV) scanning tunneling microscopy (STM) and spectroscopy (STS) are employed to interrogate point and line defects in monolayer MoS2 grown on epitaxial graphene (EG) at the atomic scale. Five types of point defects are observed with the majority species sh…
The mechanism of recrystallization in epitaxial (1000) GaN film, introduced by indentation technique, is probed by lattice dynamic studies using Raman spectroscopy. The recrystallized region is identified by Micro-Raman area mapping. Pop-in bursts in loading lines indicate nucleation of dislocations and climb of dislocations. These processes set in plastic motion of lattice atoms under stress field at the center of indentation for the initiation of recrystallization process. A planar defect migration mechanism is evolved. A pivotal role of vacancy migration is pointed out, for the first time, …
Topotactic phase transformation in correlated vanadium dioxide through oxygen vacancy ordering
Key Laboratory of Magnetic Molecules and Magnetic Information Materials of Ministry of Education & School of Chemistry and Materials Science, Shanxi Normal University（山西师范大学化学与材料科学学院、教育部磁性分子与磁性信息材料重点实验室）；Research Institute of Materials Science, Shanxi Key Laboratory of Advanced Magnetic Materials and Devices, Shanxi Normal University（山西师范大学材料科学研究所、山西省先进磁性材料与器件重点实验室）
Cryogenic scanning tunneling microscopy is employed to investigate the stoichiometry and defects of epitaxial FeSe thin films on SrTiO3(001) substrates under various post-growth annealing conditions. Low-temperature annealing with an excess supply of Se leads to formation of Fe vacancies and superstructures, accompanied by a superconductivity (metal)-to-insulator transition in FeSe films. By contrast, high-temperature annealing could eliminate the Fe vacancies and superstructures, and thus recover the high-temperature superconducting phase of monolayer FeSe films. We also observe multilayer Fe…
Magnetism in lanthanum cobaltite (LCO, LaCoO$_3$) appears to be strongly dependent on strain, defects, and nanostructuring. LCO on strontium titanate (STO, SrTiO$_3$) is a ferromagnet with an interesting strain relaxation mechanism that yields a lattice modulation. However, the driving force of the ferromagnetism is still controversial. Experiments debate between a vacancy-driven or strain-driven mechanism for the ferromagnetism of epitaxial LCO. We found that a weak lateral modulation of the superstructure is sufficient to promote ferromagnetism. We find that ferromagnetism appears under unia…
Switchable Polarization in an A-site Deficient Perovskite through Vacancy and Cation Engineering
Kyoto University（京都大学）；Nantes Université（南特大学）；The University of Tokyo（东京大学）；Japan Fine Ceramics Center（日本先进陶瓷中心）；Kyushu University（九州大学）；Pennsylvania State University（宾夕法尼亚州立大学）
Unconventional ferroelectricity, robust at reduced nanoscale sizes, exhibited by hafnia-based thin-films presents tremendous opportunities in nanoelectronics. However, the exact nature of polarization switching remains controversial. Here, we investigate epitaxial Hf0.5Zr0.5O2 (HZO) capacitors, interfaced with oxygen conducting metals (La0.67Sr0.33MnO3, LSMO) as electrodes, using atomic resolution electron microscopy while in situ electrical biasing. By direct oxygen imaging, we observe reversible oxygen vacancy migration from the bottom to the top electrode through HZO and reveal associated r…
In oxide epitaxy, the growth temperature and background oxygen partial pressure are considered as the most critical factors that control the phase stability of an oxide thin film. Here, we report an unusual case wherein diffusion of oxygen vacancies from the substrate overpowers the growth temperature and oxygen partial pressure to deterministically influence the phase stability of $Bi_{2}WO_{6}$ thin film grown by the pulsed laser deposition technique. We show that when grown on an oxygen-deficient $SrTiO_{3}$ substrate, the $Bi_{2}WO_{6}$ film exhibits a mixture of (001) and (100)/(010)-orie…
Defects are inevitably present in materials and always can affect their properties. Here, first-principles calculations are performed to systematically study the stability, structural and electronic properties of ten kinds of point defects in semiconducting phosphorene, including the Stone-Wales (SW-1 and SW-2) defect, single (SV59 and SV5566) and double vacancy (DV585-1, DV585-2, DV555777-1, DV555777-2, DV555777-3 and DV4104) defects. We find that these defects are all much easily created in phosphorene with higher areal density compared with graphene and silicene. They are easy distinguish e…
By using DFT+U, we explore the formation of oxygen vacancies and their impact on the electronic and magnetic structure in strained bulk LaNiO3 and (LaNiO3)$_1$/(LaAlO3)$_1$(001) superlattices. For bulk LaNiO3, we find that epitaxial strain induces a substantial anisotropy in the oxygen vacancy formation energy. In particular, tensile strain promotes the selective reduction of apical oxygen, which may explain why the recently observed superconductivity of infinite-layer nickelates is limited to strained films. For (LaNiO3)$_1$/(LaAlO3)$_1$(001) superlattices, the simulations reveal that the NiO…
By means of density functional theory (DFT) calculations we have quantitatively estimated the impact of the spontaneous polarization (SP) of the SiC(0001) substrate on the electronic properties of quasi-freestanding graphene (QFG) decoupled from the SiC by H intercalation. To correctly include within standard DFT slab calculations the influence of the SP, which is a bulk property, on a surface confined property such as the graphene's doping, we attach a double gold layer at the C-terminated bottom of the slab which introduces a metal induced gap state that pins the chemical potential within th…
Superconductor based quantum computing has the major drawback of working temperatures which require liquid helium for cooling. A promising approach to overcome this obstacle for quantum technologies is based on deep level defects in semiconductors, with the nitrogen vacancy (NV) center in diamond being the most prominent example. Unfortunately, diamond in sufficient quality is scarce, which motivated efforts to find similar defects in silicon carbide (SiC). So far, many reports focus on investigations of point defects in irradiated 3C-SiC and as grown material. However, the investigated defect…
