An original spectral study of the compressible hybrid lattice Boltzmann method (HLBM) on standard lattice is proposed. In this framework, the mass and momentum equations are addressed using the lattice Boltzmann method (LBM), while finite difference (FD) schemes solve an energy equation. Both systems are coupled with each other thanks to an ideal gas equation of state. This work aims at answering some questions regarding the numerical stability of such models, which strongly depends on the choice of numerical parameters. To this extent, several one- and two-dimensional HLBM classes based on different energy variables, formulation (primitive or conservative), collision terms and numerical schemes are scrutinized. Once appropriate corrective terms introduced, it is shown that all continuous HLBM classes recover the Navier-Stokes Fourier behavior in the linear approximation. However, striking differences arise between HLBM classes when their discrete counterparts are analysed. Multiple instability mechanisms arising at relatively high Mach number are pointed out and two exhaustive stabilization strategies are introduced: (1) decreasing the time step by changing the reference temperature $T_{ref}$ and (2) introducing a controllable numerical dissipation $σ$ via the collision operator. A complete parametric study reveals that only HLBM classes based on the primitive and conservative entropy equations are found usable for compressible applications. Finally, an innovative study of the macroscopic modal composition of the entropy classes is conducted. Through this study, two original phenomena, referred to as shear-to-entropy and entropy-to-shear transfers, are highlighted and confirmed on standard two-dimensional test cases.
Off-lattice Boltzmann methods increase the flexibility and applicability of lattice Boltzmann methods by decoupling the discretizations of time, space, and particle velocities. However, the velocity sets that are mostly used in off-lattice Boltzmann simulations were originally tailored to on-lattice Boltzmann methods. In this contribution, we show how the accuracy and efficiency of weakly and fully compressible semi-Lagrangian off-lattice Boltzmann simulations is increased by velocity sets derived from cubature rules, i.e. multivariate quadratures, which have not been produced by the Gauss-pro…
We present an energy conserving lattice Boltzmann model based on a crystallographic lattice for simulation of weakly compressible flows. The theoretical requirements and the methodology to construct such a model are discussed. We demonstrate that the model recovers the isentropic sound speed in addition to the effects of viscous heating and heat flux dynamics. Several test cases for acoustics, thermal and thermoacoustic flows are simulated to show the accuracy of the proposed model.
The discretized equilibrium distributions of the lattice Boltzmann method are presented by using the coefficients of the Lagrange interpolating polynomials that pass through the points related to discrete velocities and using moments of the Maxwell-Boltzmann distribution. The ranges of flow velocity and temperature providing positive valued distributions vary with regulating discrete velocities as parameters. New isothermal and thermal compressible models are proposed for flows of the level of the isothermal and thermal compressible Navier-Stokes equations. Thermal compressible shock tube flow…
A decoupled scheme based on the Hermite expansion to construct lattice Boltzmann models for the compressible Navier-Stokes equations with arbitrary specific heat ratio is proposed. The local equilibrium distribution function including the rotational velocity of particle is decoupled into two parts, i.e. the local equilibrium distribution function of the translational velocity of particle and that of the rotational velocity of particle. From these two local equilibrium functions, two lattice Boltzmann models are derived via the Hermite expansion, namely one is in relation to the translational v…
A two-fluid Discrete Boltzmann Model(DBM) for compressible flows based on Ellipsoidal Statistical Bhatnagar-Gross-Krook(ES-BGK) is presented. The model has flexible Prandtl number or specific heat ratio. Mathematically, the model is composed of two coupled Discrete Boltzmann Equations(DBE). Each DBE describes one component of the fluid. Physically, the model is equivalent to a macroscopic fluid model based on Navier-Stokes(NS) equations, and supplemented by a coarse-grained model for thermodynamic non-equilibrium behaviors. To obtain a flexible Prandtl number, a coefficient is introduced in th…
A D2Q9 Hybrid Lattice Boltzmann Method (HLBM) is proposed for the simulation of both compressible subsonic and supersonic flows. This HLBM is an extension of the model of Feng et al: [12], which has been found, via different test cases, to be unstable for supersonic regimes. The improvements consist of: (1) a new discretization of the lattice closure correction term making possible to properly simulate supersonic flows, (2) a corrected viscous stress tensor that takes into account polyatomic gases, and (3) a novel discretization of the viscous heat production term fitting with the regularized …
This work thoroughly investigates a semi-Lagrangian lattice Boltzmann (SLLBM) solver for compressible flows. In contrast to other LBM for compressible flows, the vertices are organized in cells, and interpolation polynomials up to fourth order are used to attain the off-vertex distribution function values. Differing from the recently introduced Particles on Demand (PoD) method, the method operates in a static, non-moving reference frame. Yet the SLLBM in the present formulation grants supersonic flows and exhibits a high degree of Galilean invariance. The SLLBM solver allows for an independent…
A new lattice Boltzmann model for multicomponent ideal gas mixtures is presented. The model development consists of two parts. First, a new kinetic model for Stefan- Maxwell diffusion amongst the species is proposed and realized as a lattice Boltzmann equation on the standard discrete velocity set. Second, a compressible lattice Boltzmann model for the momentum and energy of the mixture is established. Both parts are consistently coupled through mixture composition, momentum, pressure, energy and enthalpy whereby a passive scalar advection-diffusion coupling is obviated, unlike in previous app…
We present a general framework for constructing trans-scale \emph{discrete Boltzmann models} (DBMs) for high-speed compressible flows ranging from continuum to transition regime. This is achieved by designing a higher-order discrete equilibrium distribution function which satisfies additional nonhydrodynamic kinetic moments. In order to characterize the \emph{% thermodynamic non-equilibrium} (TNE) effects and estimate the condition under which the DBMs at various levels should be used, two novel measures are presented: (i) the relative TNE strength, describing the relative strength of the ($N+…
It has been demonstrated that Lattice Boltzmann schemes (LBSs) are very efficient for Computational AeroAcoustics (CAA). In order to handle the issue of absorbing acoustic boundary conditions for LBS, three kinds of damping terms are proposed and added into the right hand sides of the governing equations of LBS. From the classical theory, these terms play an important role to absorb and minimize the acoustic wave reflections from computational boundaries. Meanwhile, the corresponding macroscopic equations with the damping terms are recovered for analyzing the macroscopic behaviors of the these…
A new multiple-relaxation-time lattice Boltzmann scheme for compressible flows with arbitrary specific heat ratio and Prandtl number is presented. In the new scheme, which is based on a two-dimensional 16-discrete-velocity model, the moment space and the corresponding transformation matrix are constructed according to the seven-moment relations associated with the local equilibrium distribution function. In the continuum limit, the model recovers the compressible Navier-Stokes equations with flexible specific-heat ratio and Prandtl number. Numerical experiments show that compressible flows wit…
To kinetically model implosion and explosion related phenomena, we present a theoretical framework for constructing Discrete Boltzmann Model(DBM) with spherical symmetry in spherical coordinates. To this aim, a key technique is to use \emph{local} Cartesian coordinates to describe the particle velocity in the kinetic model. Thus, the geometric effects, like the divergence and convergence, are described as a \textquotedblleft force term\textquotedblright. To better access the nonequilibrium behavior, even though the corresponding hydrodynamic model is one-dimensional, the DBM uses a Discrete Ve…
To study simultaneously the hydrodynamic and thermodynamic behaviors in compressible flow systems with spherical or cylindrical symmetry, we present a theoretical framework for constructing Discrete Boltzmann Model(DBM) with spherical or cylindrical symmetry in spherical or cylindrical coordinates. To this aim, a key technique is to use \emph{local} Cartesian coordinates to describe the particle velocity in the kinetic model. Thus, the geometric effects, like the divergence and convergence, are described as a \textquotedblleft force term\textquotedblright . Even though the hydrodynamic models …
Turbulent compressible flows are traditionally simulated using explicit time integrators applied to discretized versions of the Navier-Stokes equations. However, the associated Courant-Friedrichs-Lewy condition severely restricts the maximum time step size. Exploiting the Lagrangian nature of the Boltzmann equation's material derivative, we now introduce a feasible three-dimensional semi-Lagrangian lattice Boltzmann method (SLLBM), which circumvents this restriction. While many lattice Boltzmann methods for compressible flows were restricted to two dimensions due to the enormous number of disc…
We propose the application of the arbitrary Lagrangian-Eulerian (ALE) technique to a compressible lattice Boltzmann model for the simulation of moving boundary problems on unstructured meshes. To that end, the kinetic equations are mapped from a moving physical domain into a fixed computational domain. The resulting equations in the computational domain are then numerically solved using the second-order accurate finite element reconstruction on an unstructured mesh. It is shown that the problem regarding the geometric conservation law (GCL), which needs a special treatment in the ALE Navier-St…
Adaptive lattice Boltzmann methods (LBMs) are based on velocity discretizations that self-adjust to local macroscopic conditions such as velocity and temperature. While this feature improves the accuracy and the stability of LBMs for large velocity and temperature fluctuations, it also strongly impacts the efficiency of the algorithm due to space interpolations that are required to get populations at grid nodes. To avoid this defect, the present work proposes new formulations of adaptive LBMs for the simulation of compressible flows which do not rely anymore on space interpolations, hence, dra…
Among the existing models for compressible fluids, the one by Kataoka and Tsutahara (KT model, Phys. Rev. E 69, 056702, 2004) has a simple and rigorous theoretical background. The drawback of this KT model is that it can cause numerical instability if the local Mach number exceeds 1. The precise mechanism of this instability has not yet been clarified. In this paper, we derive entropy functions whose local equilibria are suitable to recover the Euler-like equations in the framework of the lattice Boltzmann method for the KT model. Numerical examples are also given, which are consistent with th…
In the spirit of making high-order discontinuous Galerkin (DG) methods more competitive, researchers have developed the hybridized DG methods, a class of discontinuous Galerkin methods that generalizes the Hybridizable DG (HDG), the Embedded DG (EDG) and the Interior Embedded DG (IEDG) methods. These methods are amenable to hybridization (static condensation) and thus to more computationally efficient implementations. Like other high-order DG methods, however, they may suffer from numerical stability issues in under-resolved fluid flow simulations. In this spirit, we introduce the hybridized D…
We present a novel approach to kinetic theory modeling enabling the simulation of a generic, real gas presented by its corresponding equation of state. The model is based on mass, momentum and energy conservation, and unlike the lattice Boltzmann models enables simulations of fluids exhibiting a liquid-vapor phase transition in both super- and subcritical states. In this new kinetic theory,an arbitrary equation of state can be introduced through rescaling the discrete particle velocities.Different benchmarks associated with real-gas thermodynamics illustrate that the proposed scheme can handle…
We discuss hybrid atomistic-continuum methods for multiscale hydrodynamic applications. Both dense fluid and dilute gas formulations are considered. The choice of coupling method and its relation to the fluid physics is discussed. The differences in hybrid methods resulting from underlying compressible and incompressible continuum formulations as well as the importance of timescale decoupling are highlighted. We also discuss recently developed compressible and incompressible hybrid methods for dilute gases. The incompressible framework is based on the Schwarz alternating method whereas the com…
A double-distribution-function based lattice Boltzmann method (DDF-LBM) is proposed for the simulation of polyatomic gases in the supersonic regime. The model relies on an extended equilibrium state that is constructed to reproduce the first 13 moments of the Maxwell-Boltzmann distribution exactly. This extends the validity of the standard 5-constraint (mass, momentum and energy) approach and leads to the correct simulation of thermal, compressible flows with only 39 discrete velocities in 3D. The stability of this BGK-LBM is reinforced by relying on Knudsen-number-dependent relaxation times t…
A multiple-relaxation-time discrete Boltzmann model (DBM) is proposed for multicomponent mixtures, where compressible, hydrodynamic, and thermodynamic nonequilibrium effects are taken into account. It allows the specific heat ratio and the Prandtl number to be adjustable, and is suitable for both low and high speed fluid flows. From the physical side, besides being consistent with the multicomponent Navier-Stokes equations, Fick's law and Stefan-Maxwell diffusion equation in the hydrodynamic limit, the DBM provides more kinetic information about the nonequilibrium effects. The physical capabil…
A highly efficient three-dimensional (3D) Lattice Boltzmann (LB) model for high speed compressible flows is proposed. This model is developed from the original one by Kataoka and Tsutahara[Phys. Rev. E 69, 056702 (2004)]. The convection term is discretized by the Non-oscillatory, containing No free parameters and Dissipative (NND) scheme, which effectively damps oscillations at discontinuities. To be more consistent with the kinetic theory of viscosity and to further improve the numerical stability, an additional dissipation term is introduced. Model parameters are chosen in such a way that th…
It has recently been demonstrated that dynamical low-rank algorithms can provide robust and efficient approximation to a range of kinetic equations. This is true especially if the solution is close to some asymptotic limit where it is known that the solution is low-rank. A particularly interesting case is the fluid dynamic limit that is commonly obtained in the limit of small Knudsen number. However, in this case the Maxwellian which describes the corresponding equilibrium distribution is not necessarily low-rank; because of this, the methods known in the literature are only applicable to the …
This paper presents an extension of the hybrid scheme proposed by Wang et al. (J. Comput. Phys. 229 (2010) 169-180) for numerical simulation of compressible isotropic turbulence to flows with higher turbulent Mach numbers. The scheme still utilizes an 8th-order compact scheme with built-in hyperviscosity for smooth regions and a 7th-order WENO scheme for highly compressive regions, but now both in their conservation formulations and for the latter with the Roe type characteristic-wise reconstruction. To enhance the robustness of the WENO scheme without compromising its high-resolution and accu…
In this paper, we propose a hybrid lattice Boltzmann method (HLBM) for solving fluid-structure interaction problems. The proposed numerical approach is applied to model the flow induced by a vibrating thin lamina submerged in a viscous quiescent fluid. The hydrodynamic force exerted by the fluid on the solid body is described by means of a complex hydrodynamic function, whose real and imaginary parts are determined via parametric analysis. Numerical results are validated by comparison with those from other numerical as well as experimental works available in the literature. The proposed hybrid…
We present a set of polynomial equations that provides models of the lattice Boltzmann theory for any required level of accuracy and for any dimensional space in a general form. We explicitly derive two- and three-dimensional models applicable to describe thermal compressible flows of the level of the Navier-Stokes equations.
In the Part 1 of the present paper the performance of several different low and high-order finite-volume methods were assessed by investigating how well they can capture the turbulent spectra of a compressible flow where small smooth turbulent structures interact with shocks and discontinuities. The comparisons showed that a second-order Godunov method with PPM interpolation provides results virtually the same as a fourth-order WENO scheme but at a significant lower cost. However, it is shown that the PPM method fails to provide an accurate representation in the high-frequency range of the spe…
We simulate the two-dimensional fluid flow around National Advisory Committee for Aeronautics (NACA) 0012 airfoil using a hybrid lattice Boltzmann method (HLBM), which combines the standard lattice Boltzmann method with an unstructured finite-volume formulation. The aim of the study is to assess the numerical performances and the robustness of the computational method. To this purpose, after providing a convergence study to estimate the overall accuracy of the method, we analyze the numerical solution for different values of the angle of attack at a Reynolds number equal to $10^3$. Subsequentl…
Lattice Boltzmann models provide better understanding with mesoscopic eyesight on multi-component diffusion than macroscopic models. Based on the kinetic theory and starting from the He-Luo model, the state-of-the-art multi-component diffusion Lattice Boltzmann models have defects of the compressible error and the limitations for velocity and viscosity settings in lattice units. With these respects, a new Lattice Boltzmann model is presented based on the advection-diffusion equation and is coupled with the Maxwell-Stefan equation by relaxation time. Without introducing the pressure term into t…
The kinetic theory of gases has suggested the idea of viscosity to model the effect of thermal fluctuations on the resolved flow. Supported by the assumed analogy between molecules and the eddies in a turbulent flows, the idea of an eddy viscosity has been put forward in the pioneering work by Lord Kelvin and Osborne Reynolds. In over hundred years of turbulence modeling, the numerical schemes adopted to simulate turbulent flow - with the exception of the Lattice Boltzmann methods - have never exploited this analogy in any other way. In this work, a gas-kinetic scheme is modified to simulate t…
A new lattice Boltzmann model for reactive ideal gas mixtures is presented. The model is an extension to reactive flows of the recently proposed multi-component lattice Boltzmann model for compressible ideal gas mixtures with Stefan-Maxwell diffusion for species interaction. First, the kinetic model for the Stefan--Maxwell diffusion is enhanced to accommodate a source term accounting the change of the mixture composition due to chemical reaction. Second, by including the heat of formation in the energy equation, the thermodynamic consistency of the underlying compressible lattice Boltzmann mod…
A crucial issue in fluid dynamics is related to the knowledge of the fluid pressure. A new general pressure equation is derived from compressible Navier-Stokes equation. It is argued that this new pressure equation allows unifying compressible, low-Mach and incompressible approaches. Moreover, this equation should be able to replace the Poisson equation in isothermal incompressible fluids. For computational fluid dynamics, it can be seen as an alternative to Lattice Boltzmann methods and as the physical justification of artificial com-pressibility.
GPU-based compressible lattice Boltzmann simulations on non-uniform grids using standard C++ parallelism: From best practices to aerodynamics, aeroacoustics and supersonic flow simulations
Institute for Advanced Study, Beijing Normal - Hong Kong Baptist University（北京师范大学-香港浸会大学联合国际学院先进研究院）；Computer Science Department, University of Geneva（日内瓦大学计算机系）
Pool boiling characteristics in two computational domains with and without considering conjugate heat transfer (CHT) were numerically simulated by an improved hybrid pseudopotential phase-change lattice Boltzmann method (LBM). The effects of constant temperature boundary condition (BC) with nucleate spots and fluctuant temperature on the boiling process were investigated in detail. It was found that for the computational domain without CHT, the treatment of constant temperature BC with nucleate spots is quite easier to produce film boiling than the temperature BC with small fluctuation. Howeve…
Hybrid Monte Carlo (HMC) generates samples from a prescribed probability distribution in a configuration space by simulating Hamiltonian dynamics, followed by the Metropolis (-Hastings) acceptance/rejection step. Compressible HMC (CHMC) generalizes HMC to a situation in which the dynamics is reversible but not necessarily Hamiltonian. This article presents a framework to further extend the algorithm. Within the existing framework, each trajectory of the dynamics must be integrated for the same amount of (random) time to generate a valid Metropolis proposal. Our generalized acceptance/rejection…
In this paper, we develop a simplified hybrid weighted essentially non-oscillatory (WENO) method combined with the modified ghost fluid method (MGFM) [28] to simulate the compressible two-medium flow problems. The MGFM can turn the two-medium flow problems into two single-medium cases by defining the ghost fluids status in terms of the predicted the interface status, which makes the material interface "invisible". For the single medium flow case, we adapt between the linear upwind scheme and the WENO scheme automatically by identifying the regions of the extreme points for the reconstruction p…
One of the most demanding calculations is to generate random samples from a specified probability distribution (usually with an unknown normalizing prefactor) in a high-dimensional configuration space. One often has to resort to using a Markov chain Monte Carlo method, which converges only in the limit to the prescribed distribution. Such methods typically inch through configuration space step by step, with acceptance of a step based on a Metropolis(-Hastings) criterion. An acceptance rate of 100% is possible in principle by embedding configuration space in a higher-dimensional phase space and…
We propose numerical simulations of viscoelastic fluids based on a hybrid algorithm combining Lattice-Boltzmann models (LBM) and Finite Differences (FD) schemes, the former used to model the macroscopic hydrodynamic equations, and the latter used to model the polymer dynamics. The kinetics of the polymers is introduced using constitutive equations for viscoelastic fluids with finitely extensible non-linear elastic dumbbells with Peterlin's closure (FENE-P). The numerical model is first benchmarked by characterizing the rheological behaviour of dilute homogeneous solutions in various configurat…
In this paper, a two-dimensional eight-velocity (D2Q8) multiple-relaxation-time (MRT) lattice Boltzmann (LB) model is proposed for incompressible porous flows at the representative elementary volume scale based on the Brinkman-Forchheimer-extended Darcy formulation. In the model, the porosity is included into the pressure-based equilibrium moments, and the linear and nonlinear drag forces of the porous media are incorporated into the model by adding a forcing term to the MRT-LB equation in the moment space. Through the Chapman-Enskog analysis, the generalized Navier-Stokes equations can be rec…
We present a set of uniform polynomial equations that provides multidimensional on-lattice higher-order models of the lattice Boltzmann theory, while keeping compact the number of discrete velocities. As examples, we explicitly derive two- and three-dimensional on-lattice models applicable to describing thermal compressible flows of the accuracy levels of the Navier-Stokes equations with smaller numbers of discrete velocities in comparison to the existing models. We demonstrate the accuracy and stability of the three-dimensional model by using the Riemann problem.
By means of the multicomponent Shan-Chen lattice Boltzmann method (LBM), we investigate the multiphase flow through porous media. Despite the excellent accuracy of the LBM, large domains result in unaffordable computational expenses. The Hybrid model developed in this study is based on a pore-network (PN) approach that enhances a decomposition of the granular assembly into small subsets (pore throats). Lattice Boltzmann simulations are performed for each pore throat to determine the hydrodynamic properties (entry capillary pressure, primary drainage curve, liquid morphology, etc) at the micros…
In a recent work [A. De Rosis, R. Huang, and C. Coreixas, "Universal formulation of central-moments-based lattice Boltzmann method with external forcing for the simulation of multiphysics phenomena", Phys. Fluids 31, 117102 (2019)], a multiple-relaxation-time lattice Boltzmann method (LBM) has been proposed by means of the D3Q27 discretization, where the collision stage is performed in the space of central moments (CMs). These quantities relax towards an elegant Galilean invariant equilibrium, and can also include the effect of external accelerations. Here, we investigate the possibility to ad…
A lattice Boltzmann method (LBM) approach to the Charney-Hasegawa-Mima (CHM) model for adiabatic drift wave turbulence in magnetised plasmas, is implemented. The CHM-LBM model contains a barotropic equation of state for the potential, a force term including a cross-product analogous to the Coriolis force in quasigeostrophic models, and a density gradient source term. Expansion of the resulting lattice Boltzmann model equations leads to cold-ion fluid continuity and momentum equations, which resemble CHM dynamics under drift ordering. The resulting numerical solutions of standard test cases (mo…
In this paper we develop a 3D Lattice-Boltzmann model that recovers in the continuous limit the two-fluids theory for plasmas, and consecuently includes the generalizated Ohm's law. The model reproduces the magnetic reconnection process just by given the right initial equlibrium conditions in the magnetotail, without any assumption on the resistivity in the diffusive region. In this model, the plasma is handled like two fluids with an interaction term, each one with distribution functions associated to a cubic lattice with 19 velocities (D3Q19). The electromagnetic fields are considered like a…
