Advances in opto-electronics require the development of materials with novel and engineered characteristics. A class of materials that has garnered tremendous interest is metal-halide perovskites, stimulated by meteoric increases in photovoltaic efficiencies of perovskite solar cells. In addition, recent advances have applied perovskite nanocrystals (NCs) in light-emitting devices. It was discovered recently that, for cesium lead-halide perovskite NCs, their unusually efficient light-emission may be due to a unique excitonic fine-structure composed of three bright triplet states that minimally interact with a proximal dark singlet state. To study this fine-structure without isolating single NCs, we use multi-dimensional coherent spectroscopy at cryogenic temperatures to reveal coherences involving triplet states of a CsPbI$_3$ NC ensemble. Picosecond timescale dephasing times are measured for both triplet and inter-triplet coherences, from which we infer a unique exciton fine-structure level-ordering comprised of a dark state energetically positioned within the bright triplet manifold.
Nanocrystals based on metal-halide perovskites offer a promising material platform for highly efficient lighting. Using transient optical spectroscopy, we study excitation recombination dynamics in manganese-doped CsPb(Cl,Br)3 perovskite nanocrystals. We find an increase in the intrinsic excitonic radiative recombination rate upon doping, which is typically a challenging material property to tailor. Supported by ab initio calculations, we can attribute the enhanced emission rates to increased exciton localization through lattice periodicity breaking from Mn dopants, which increases exciton eff…
We correlate spatially resolved fluorescence (-lifetime) measurements with X-ray nanodiffraction to reveal surface defects in supercrystals of self-assembled caesium lead halide perovskite nanocrystals and study their effect on the fluorescence properties. Upon comparison with density functional modelling, we show that a loss in structural coherence, an increasing atomic misalignment between adjacent nanocrystals, and growing compressive strain near the surface of the supercrystal are responsible for the observed fluorescence blueshift and decreased fluorescence lifetimes. Such surface defect-…
We show that the decomposition of caesium lead halide perovskite nanocrystals under continuous X-ray illumination depends on the surface ligand. For oleic acid/oleylamine, we observe a fast decay accompanied by the formation of elemental lead and halogen. Upon surface functionalization with a metal porphyrin derivate, the decay is markedly slower and involves the disproportionation of lead to Pb0 and Pb3+. In both cases, the decomposition is preceded by a contraction of the atomic lattice, which appears to initiate the decay. We find that the metal porphyrin derivative induces a strong surface…
Metal halide perovskites represent a flourishing area of research, driven by both their potential application in photo-voltaics and optoelectronics, and for the fundamental science underpinning their unique optoelectronic properties. The advent of colloidal methods for the synthesis of halide perovskite nanocrystals has brought to the attention inter-esting aspects of this new type of materials, above all their defect-tolerance. This review aims to provide an updated survey of this fast-moving field, with a main focus on their colloidal synthesis. We examine the chemistry and the ca-pability o…
Heterovalent substitution of toxic lead is an increasingly popular design strategy to obtain environmentally sustainable variants of the exciting material class of halide perovskites. Perovskite nanocrystals (NCs) obtained through solution-based methods exhibit exceedingly high optical quality. Unfortunately, most of these synthesis routes still require reaction under inert gas and at very high temperatures. Herein we present a novel synthesis routine for lead-free double perovskite NCs. We combine hot injection and ligand-assisted reprecipitation (LARP) methods to achieve a low-temperature an…
Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance catio…
In this investigation, we have synthesized thermally stable cubic CsSnCl$_{3}$ perovskite nanocrystals (crystal size ~300 nm) with better surface morphology by the hot-injection technique. Excellent crystalline quality of these cubic nanocrystals was confirmed by high-resolution transmission electron microscopy imaging. The binding of organic ligands on the surface of the sample was characterized by nuclear magnetic resonance spectroscopy. The UV-visible spectroscopy ensured that CsSnCl$_{3}$ nanocrystals have a direct bandgap of ~2.98 eV which was confirmed by steady-state photoluminescence s…
Halide perovskite nanocrystals (NCs) have emerged as a promising material for applications ranging from light-emitting diodes (LEDs) to solar cells and photodetectors. Still, several issues impede the realization of the nanocrystals' full potential, most notably their susceptibility to degradation from environmental stress. This work demonstrates highly stable perovskite nanocrystals (NCs) with quantum yields as high as 95 % by exploiting a ligand-assisted copolymer nanoreactor-based synthesis. The organic ligands thereby serve a dual function by enhancing the uptake of precursors and passivat…
Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. However, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where…
Carrier spins in semiconductor nanocrystals are promising candidates for quantum information processing. Using a combination of time-resolved Faraday rotation and photoluminescence spectroscopies, we demonstrate optical spin polarization and coherent spin precession in colloidal CsPbBr3 nanocrystals that persists up to room temperature. By suppressing the influence of inhomogeneous hyperfine fields with a small applied magnetic field, we demonstrate inhomogeneous hole transverse spin-dephasing times (T2*) that approach the nanocrystal photoluminescence lifetime, such that nearly all emitted ph…
Singlet fission process has gained considerable attention because of its potential to enhance photovoltaic efficiency and break the Shockley Queisser limit. In photovoltaic devices perovskite materials have shown tremendous progress in the last decade. Therefore combining the singlet fission materials in perovskite devices can lead to a drastic enhancement in their performance. To reveal the applicability of singlet fission processes in perovskite materials we have investigated the charge transfer dynamics from an SF active material 910 bis phenylethynyl anthracene to CH3NH3PbBr3 perovskite na…
The spin physics of perovskite nanocrystals with confined electrons or holes is attracting increasing attention, both for fundamental studies and spintronic applications. Here, stable CsPb(Cl$_{0.5}$Br$_{0.5}$)$_3$ lead halide perovskite nanocrystals embedded in a fluorophosphate glass matrix are studied by time-resolved optical spectroscopy to unravel the coherent spin dynamics of holes and their interaction with nuclear spins of the $^{207}$Pb isotope. We demonstrate the spin mode locking effect provided by the synchronization of the Larmor precession of single hole spins in each nanocrystal…
Under continuous light illumination, it is known that localized domains with segregated halide compositions form in semiconducting mixed-halide perovskites, thus severely limiting their optoelectronic applications due to the negative changes in bandgap energies and charge-carrier characteristics. Here we deposit mixed-halide perovskite CsPbBr1.2I1.8 nanocrystals onto an indium tin oxide substrate, whose temperature can be rapidly changed by ~10 degree in a few seconds by applying or removing an external voltage. Such a sudden temperature change induces a temporary transition of CsPbBr1.2I1.8 n…
The microscopic origin of slow carrier cooling in lead-halide perovskites remains debated, and has direct implications for applications. Slow carrier cooling has been attributed to either polaron formation or a hot-phonon bottleneck effect at high excited carrier densities (> 10$^{18}$ cm$^{-3}$). These effects cannot be unambiguously disentangled from optical experiments alone. However, they can be distinguished by direct observations of ultrafast lattice dynamics, as these effects are expected to create qualitatively distinct fingerprints. To this end, we employ femtosecond electron diffract…
Lead-halide perovskite nanocrystals (PNCs) exhibit unique optoelectronic properties, many of which originate from a purported bright-triplet exciton fine-structure. A major impediment to measuring this fine-structure is inhomogeneous spectral broadening, which has limited most experimental studies to single-nanocrystal spectroscopies. It is shown here that the linearly-polarized single-particle selection rules in PNCs are preserved in nonlinear spectroscopies of randomly-oriented ensembles. Simulations incorporating rotational-averaging demonstrate that techniques such as transient absorption …
The power conversion efficiency of photovoltaic devices based on semiconductor perovskites has reached ~20% after just several years of research efforts. With concomitant discoveries of other promising applications in lasers, light-emitting diodes and photodetectors, it is natural to anticipate what further excitements these exotic perovskites could bring about. Here we report on the observation of single photon emission from single CsPbBr3 perovskite nanocrystals (NCs) synthesized from a facile colloidal approach. Compared with traditional metal-chalcogenide NCs, these CsPbBr3 NCs exhibit nea…
Over the last two decades, intensive research efforts have been devoted to the suppressions of photoluminescence (PL) blinking and Auger recombination in metal-chalcogenide nanocrystals (NCs), with significant progresses being made only very recently in several specific heterostructures. Here we show that nonblinking PL is readily available in the newly-synthesized perovskite CsPbI3 (cesium lead iodide) NCs, and their Auger recombination of charged excitons is greatly slowed down, as signified by a PL lifetime about twice shorter than that of neutral excitons. Moreover, spectral diffusion is c…
The band-gaps of CsPbI$_3$ perovskite nanocrystals are measured by absorption spectroscopy at cryogenic temperatures. Anomalous band-gap shifts are observed in CsPbI$_3$ nanocubes and nanoplatelets, which are modeled accurately by band-gap renormalization due to lattice vibrational modes. We find that decreasing dimensionality of the CsPbI$_3$ lattice in nanoplatelets greatly reduces electron-phonon coupling, and dominant out-of-plane quantum confinement results in a homogeneously broadened absorption lineshape down to cryogenic temperatures. An absorption tail forms at low-temperatures in CsP…
Controlling size and shape of semiconducting nanocrystals advances nanoelectronics and photonics. Quantum confined, inexpensive, solution derived metal halide perovskites offer narrow band, color-pure emitters as integral parts of next-generation displays and optoelectronic devices. We use nanoporous silicon and alumina thin films as templates for the growth of perovskite nanocrystallites directly within device-relevant architectures without the use of colloidal stabilization. We find significantly blue shifted photoluminescence emission by reducing the pore size; normally infrared-emitting ma…
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in t…
Outstanding optoelectronic properties and a facile synthesis render halide perovskite nanocrystals (NCs) a promising material for nanostructure-based devices. However, the commercialization is hindered mainly by the lack of NC stability under ambient conditions and inefficient charge carrier injection. Here, we investigate solutions to both problems, employing methylammonium lead bromide (MAPbBr_3) NCs encapsulated in diblock copolymer core-shell micelles of tunable size. We confirm that the shell does not prohibit energy transfer, as FRET efficiencies between these NCs and 2D CsPbBr_3 nanopla…
Exciton Coherence in CsPbBr3 Nanocrystals is Bounded by Phonon-Mediated Bright-Triplet Relaxation
Massachusetts Institute of Technology（麻省理工学院）；Center for Hybrid Organic Inorganic Semiconductors for Energy（有机无机半导体混合能源中心）；National Laboratory of the Rockies（落基山国家实验室）；U.S. Naval Research Laboratory（美国海军研究实验室）；Lund University（隆德大学）
The development of next generation perovskite-based optoelectronic devices relies critically on the understanding of the interaction between charge carriers and the polar lattice in out-of-equilibrium conditions. While it has become increasingly evident for CsPbBr3 perovskites that the Pb-Br framework flexibility plays a key role in their light-activated functionality, the corresponding local structural rearrangement has not yet been unambiguously identified. In this work, we demonstrate that the photoinduced lattice changes in the system are due to a specific polaronic distortion, associated …
Two-dimensional halide perovskite nanoplatelets (NPLs) have exceptional light-emitting properties, including wide spectral tunability, ultrafast radiative decays, high quantum yields (QY), and oriented emission. To realize efficient devices, it is imperative to understand how exciton transport progresses in NPL thin films. Due to the high binding energies of electron-hole pairs, excitons are generally considered the dominant species responsible for carrier transfer. We employ spatially and temporally resolved optical microscopy to map exciton diffusion in perovskite nanocrystal (NC) thin films…
Atomistically detailed computational studies of nanocrystals, such as those derived from the promising lead-halide perovskites, are challenging due to the large number of atoms and lack of symmetries to exploit. Here, focusing on methylammonium lead iodide nanocrystals, we combine a real-space tight binding model with the GW approximation to the self-energy and obtain exciton wavefunctions and absorption spectra via solutions of the associated Bethe-Salpeter equation. We find that the size dependence of carrier confinement, dielectric contrast, electron-hole exchange, and exciton binding energ…
Metal-halide perovskite nanocrystals have demonstrated excellent optoelectronic properties for light-emitting applications. Isovalent doping with various metals (M2+) can be used to tailor and enhance their light emission. Although crucial to maximize performance, an understanding of the universal working mechanism for such doping is still missing. Here, we directly compare the optical properties of nanocrystals containing the most commonly employed dopants, fabricated under identical synthesis conditions. We show for the first time unambiguously and supported by first principles calculations …
All-inorganic lead halide perovskite nanocrystals (NCs) show potential in optoelectronic devices, though their stability and efficiency have yet to improve. In this work, we explore the effect of bivalent metal site doping on the optoelectronic properties of CsPbX$_3$ (X = Br, Cl) perovskite NCs. First, the Pb$^{2+}$ ions in pristine CsPbBr$_3$ NC are partially substituted by Mn$^{2+}$ ions, and the alkaline earth metal strontium is then doped on both pristine and Mn$^{2+}$-substituted particles. The structural and photophysical properties of the pristine and the three doped NC variants have b…
Dark ground state exciton in semiconductor nanocrystals has been a subject of much interest due to its long lifetime attractive for applications requiring long-lived electronic or spin states. Significant effort has been made recently to explore and access the dark exciton level in metal halide perovskite nanocrystals, which are emerging as a superior source of photons and charges compared to other existing semiconductor nanocrystals. However, the direct observation of long-lived photoluminescence from dark exciton has remained elusive in metal halide perovskite nanocrystals. Here, we report t…
The instability of metal halide perovskites upon exposure to moisture or heat strongly hampers their applications in optoelectronic devices. Here, we report the large-yield synthesis of highly water-resistant total-inorganic green luminescent CsPbBr3/CsPb2Br5 core/shell heteronanocrystals (HNCs) by developing an in situ phase transition approach. It is implemented via water-driven phase transition of the original monoclinic CsPbBr3 nanocrystal and the resultant tetragonal CsPb2Br5 nanoshell has small lattice mismatch with the CsPbBr3 core, which ensures formation of an epitaxial interface for …
Exciton Transport in Disordered Perovskite Nanocrystal Solids
Condensed Matter Physics Center, IFIMAC, Universidad Autónoma de Madrid（马德里自治大学凝聚态物理中心IFIMAC）；Departamento de Física de la Materia Condensada, Facultad de Ciencias, Universidad Autónoma de Madrid（马德里自治大学理学院凝聚态物理系）；Instituto de Ciencia de Materiales de Madrid, ICMM, Consejo Superior de Investigaciones Científicas, CSIC（西班牙国家研究委员会马德里材料科学研究所ICMM）；Departamento de Química Inorgánica, Facultad de Ciencias Químicas, Universidad Complutense de Madrid（马德里康普顿斯大学化学学院无机化学系）
Halide perovskite nanocrystals (NCs) have shown impressive advances, exhibiting optical properties that outpace conventional semiconductor NCs, such as near-unity quantum yields and ultrafast radiative decay rates. Nevertheless, the NCs suffer even more from stability problems at ambient conditions and due to moisture than their bulk counterparts. Herein, we report a strategy of employing polymer micelles as nanoreactors for the synthesis of methylammonium lead trihalide perovskite NCs. Encapsulated by this polymer shell, the NCs display strong stability against water degradation and halide io…
Yb3+-doped inorganic metal-halide perovskites (Yb3+:CsPbX3, X = Cl, Br) have recently been discovered to display highly efficient quantum cutting, in which the energy from individual blue or UV photons absorbed by the material is re-emitted in the form of pairs of near-infrared photons by Yb3+ dopants. Experimental photoluminescence quantum yields approaching 200{%} have been reported. As the first quantum-cutting materials that combine such high photoluminescence quantum yields with strong, broadband absorption in the visible, these materials offer unique opportunities for enhancing the effic…
Light-emitting diodes based on perovskite nanocrystals (PNCs-LEDs) have gained great interest for next-generation display and lighting technologies prized for their color purity, high brightness and luminous efficiency approaching the intrinsic limit imposed by extraction of electroluminescence from the device structure. Although the time is ripe for the development of effective light outcoupling strategies to further boost the device performance, this technologically relevant aspect of PNC-LEDs is still without a definitive solution. Here, following theoretical guidelines and without the inte…
Zero dimensional perovskite Cs4PbBr6 has attracted considerable attention recently not only because of its highly efficient green photoluminescence (PL), but also its two highly debated opposing mechanisms of the luminescence: embedded CsPbBr3 nanocrystals versus intrinsic Br vacancy states. After a brief discussion on the root cause of the controversy, we provide sensitive but non-invasive methods that can not only directly correlate luminescence with the underlying structure, but also distinguish point defects from embedded nanostructures. We first synthesized both emissive and non-emissive …
A method for improving the efficiency of solar cells is combining a low-bandgap semiconductor with a singlet fission material (which converts one high energy singlet into two low energy triplets following photoexcitation). Here we present a study of the interface between singlet fission molecules and low-bandgap halide pervoskites. We briefly show a range of experiments screening for triplet transfer into a halide perovskite. However, in all cases triplet transfer was not observed. This motivated us to understand the halide perovskite/singlet fission interface better by carrying out first-prin…
Halide Perovskite-Chalcohalide Nanocrystal Heterostructures as a Platform for the Synthesis and Investigation of the CsPbCl3-CsPbI3 Epitaxial Interface
