Effect of Dimensionality on the Optical Absorption Properties of CsPbI$_3$ Perovskite Nanocrystals
Albert Liu, Luiz G. Bonato, Francesco Sessa, Diogo B. Almeida, Erik Isele, Gabriel Nagamine, Luiz F. Zagonel, Ana F. Nogueira, Lazaro A. Padilha, Steven T. Cundiff
The band-gaps of CsPbI$_3$ perovskite nanocrystals are measured by absorption spectroscopy at cryogenic temperatures. Anomalous band-gap shifts are observed in CsPbI$_3$ nanocubes and nanoplatelets, which are modeled accurately by band-gap renormalization due to lattice vibrational modes. We find that decreasing dimensionality of the CsPbI$_3$ lattice in nanoplatelets greatly reduces electron-phonon coupling, and dominant out-of-plane quantum confinement results in a homogeneously broadened absorption lineshape down to cryogenic temperatures. An absorption tail forms at low-temperatures in CsPbI$_3$ nanocubes, which we attribute to shallow defect states positioned near the valence band-edge.
We use solid-state methods to synthesize single crystals of perovskite-phase cesium lead iodide ($γ$-CsPbI3) that are kinetically stable at room temperature. Single crystal X-ray diffraction characterization shows that the compound is orthorhombic with the GdFeO3 structure at room temperature. Unlike conventional semiconductors, the optical absorption and the joint density-of-states of bulk $γ$-CsPbI3 is greatest near the band edge and decreases beyond Eg for at least 1.9 eV. Bulk $γ$-CsPbI3 does not show an excitonic resonance and has an optical band gap of 1.63(3) eV, ~90 meV smaller than ha…
Despite the tremendous interest in halide perovskites in solar cells, the reason that the all-inorganic perovskite CsPbI$_3$ is unstable at room temperature remains mysterious. Here single-crystal X-ray diffraction and powder pair distribution function (PDF) measurements characterize bulk perovskite CsPbI$_3$ from 100 to 295 K to elucidate its thermodynamic instability. While Cs occupies a single site from 100 to 150 K, it splits between two sites from 175 to 295 K with the second site having a lower effective coordination number, which along with other structural parameters suggests that Cs r…
Hybrid heterostructure based phototransistors are attractive owing to their high gain induced by photogating effect. However, the absence of an in-plane built-in electric field in the single channel layer transistor results in a relatively higher dark current and require a large operating gate voltage of the device. Here, we report novel air-stable cesium lead iodide/tungsten di-sulfide (CsPbI$_3$/WS$_2$) mixed dimensional heterostructure based photo-field-effect-transistors (photo-FETs) with asymmetric metal electrodes (Cr/WS$_2$/Au), exhibiting extremely low dark current (~10-12 A) with a re…
CsPbI3 has recently received tremendous attention as a possible absorber of perovskite solar cells (PSCs). However, CsPbI3-based PSCs have yet to achieve the high performance of the hybrid PSCs. In this work, we performed a density functional theory (DFT) study using the Cambridge Serial Total Energy Package (CASTEP) code for the cubic CsPbI3 absorber to compare and evaluate its structural, electronic, and optical properties. The calculated electronic band gap (Eg) using the GGA-PBE approach of CASTEP was 1.483 eV for this CsPbI3 absorber. Moreover, the computed density of states (DOS) exhibit…
Surface-defect passivation is key to achieving high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance catio…
Halide perovskite nanocrystals (NCs) have emerged as a promising material for applications ranging from light-emitting diodes (LEDs) to solar cells and photodetectors. Still, several issues impede the realization of the nanocrystals' full potential, most notably their susceptibility to degradation from environmental stress. This work demonstrates highly stable perovskite nanocrystals (NCs) with quantum yields as high as 95 % by exploiting a ligand-assisted copolymer nanoreactor-based synthesis. The organic ligands thereby serve a dual function by enhancing the uptake of precursors and passivat…
Previous theoretical calculations show azetidinium has the right radial size to form a 3D perovskite with lead halides [1], and has been shown to impart, as the A-site cation of ABX3 unit, beneficial properties to ferroelectric perovskites [2]. However, there has been very limited research into its use as the cation in lead halide perovskites to date. In this communication we report the synthesis and characterization of azetidinium-based lead mixed halide perovskite colloidal nanocrystals. The mixed halide system is iodine and chlorine unlike other reported nanocrystals in the literature where…
Singlet fission process has gained considerable attention because of its potential to enhance photovoltaic efficiency and break the Shockley Queisser limit. In photovoltaic devices perovskite materials have shown tremendous progress in the last decade. Therefore combining the singlet fission materials in perovskite devices can lead to a drastic enhancement in their performance. To reveal the applicability of singlet fission processes in perovskite materials we have investigated the charge transfer dynamics from an SF active material 910 bis phenylethynyl anthracene to CH3NH3PbBr3 perovskite na…
Lead halide perovskite nanocrystals (NCs) are currently emerging as one of the most interesting solution processed semiconductors since they possess high photoluminescence quantum yield (PLQY), and colour tunability through anion exchange reactions or quantum confinement. Here, we show efficient solar cells based on mixed halide (CsPbBrI2) NCs obtained via anion exchange reactions in ambient conditions. We performed anion exchange reactions in concentrated NC solutions with I-, thus inducing a PL red-shift up to 676 nm, and obtaining a high PLQY in film (65%). Solar cell devices operating in t…
All-inorganic lead halide perovskite nanocrystals (NCs) show potential in optoelectronic devices, though their stability and efficiency have yet to improve. In this work, we explore the effect of bivalent metal site doping on the optoelectronic properties of CsPbX$_3$ (X = Br, Cl) perovskite NCs. First, the Pb$^{2+}$ ions in pristine CsPbBr$_3$ NC are partially substituted by Mn$^{2+}$ ions, and the alkaline earth metal strontium is then doped on both pristine and Mn$^{2+}$-substituted particles. The structural and photophysical properties of the pristine and the three doped NC variants have b…
Dark ground state exciton in semiconductor nanocrystals has been a subject of much interest due to its long lifetime attractive for applications requiring long-lived electronic or spin states. Significant effort has been made recently to explore and access the dark exciton level in metal halide perovskite nanocrystals, which are emerging as a superior source of photons and charges compared to other existing semiconductor nanocrystals. However, the direct observation of long-lived photoluminescence from dark exciton has remained elusive in metal halide perovskite nanocrystals. Here, we report t…
Halide perovskite nanocrystals (NCs) have shown impressive advances, exhibiting optical properties that outpace conventional semiconductor NCs, such as near-unity quantum yields and ultrafast radiative decay rates. Nevertheless, the NCs suffer even more from stability problems at ambient conditions and due to moisture than their bulk counterparts. Herein, we report a strategy of employing polymer micelles as nanoreactors for the synthesis of methylammonium lead trihalide perovskite NCs. Encapsulated by this polymer shell, the NCs display strong stability against water degradation and halide io…
Inorganic lead halide perovskite materials have attracted great attention recently due to their potential for greater thermal stability compared to hybrid organic perovskites. However, the high processing temperature to convert from the non-perovskite phase to cubic perovskite phase in many of these systems has limited their application in flexible optoelectronic devices. Here, we report a room temperature processed inorganic PSC based on CsPbI2Br as the light harvesting layer. By combing this composition with key precursor solvents, we show that the inorganic perovskite film can be prepared b…
Operational stability of perovskite solar cells is remarkably influenced by the device temperature, therefore, decreasing the interior temperature of the device is one of the most effective approaches to prolong the service life. Herein, we introduce the spontaneous radiative cooling effect into the perovskite solar cell and amplified this effect via functional structure design of a full-carbon electrode (F-CE). Firstly, with interface engineering, >19% and >23% power conversion efficiencies of F-CE based inorganic CsPbI3 and hybrid perovskite solar cells have been achieved, respectively, both…
Future generations of liquid scintillator neutrino experiments will require stably loading tons of candidate isotopes into kiloton-scale detectors, representing a significant chemical challenge. Nanoparticles containing the candidate isotopes provide a promising method for this loading. Additionally, the unique optical properties of nanoparticles can enhance detection and background discrimination. Perovskite nanocrystals are particularly attractive due to the reliability of their crystal structure and their easily-scalable synthesis. We present here the first study of lead-based perovskite na…
The optoelectric applications, light emitters and photovoltaics, with organometallic halide perovskite materials have been decided by dynamics of charge carriers in grains on the polycrystalline thin films. Especially, polar solvent vapour recrystallizes perovskites and changes their grain sizes. In this paper, various polar solvents were evaluated with density functional theory calculation. And a stociometric treatment with these solvents which enhanced photoluminescence intensity was established. The properties of solvents which caused dramatic photoluminescence enhancement and quantum confi…
Metal-halide perovskite nanocrystals have demonstrated excellent optoelectronic properties for light-emitting applications. Isovalent doping with various metals (M2+) can be used to tailor and enhance their light emission. Although crucial to maximize performance, an understanding of the universal working mechanism for such doping is still missing. Here, we directly compare the optical properties of nanocrystals containing the most commonly employed dopants, fabricated under identical synthesis conditions. We show for the first time unambiguously and supported by first principles calculations …
Perovskite nanocrystal light-emitting diodes (LEDs) employing architecture comprising a ZnO nanoparticles electron-transport layer and a conjugated polymer hole-transport layer have been fabricated. The obtained LEDs demonstrate a maximum external-quantum-efficiency of 6.04%, luminance of 12998 Cd/m2 and stable electroluminescence at 519 nm. Importantly, such high efficiency and brightness have been achieved by employing solution processed transport layers, formamidinium lead bromide nanocrystals (CH(NH2)2PbBr3 NCs) synthesized at room-temperature and in air without the use of a Schlenk line, …
Förster Resonant Energy Transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as a new optoelectronic design element to transport energy. However, so far nanocrystal (NC) systems supported only diffusion length of 30 nm, which are too small to be useful in devices. Here, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm2/s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (PNC). Exciton diffusion was directly measured via steady-state and time-resolved pho…
We demonstrate a passive down-conversion imaging system that converts broadband ultraviolet light to narrow-band green light while preserving the directionality of rays, and thus enabling direct down-conversion imaging. At the same time our system has high transparency in the visible, enabling superimposed visible and ultraviolet imaging. The frequency conversion is performed by a subwavelength-thickness transparent downconverter based on highly efficient CsPbBr3 nanocrystals incorporated into the focal plane of a simple telescope or relay-lens geometry. The resulting imaging performance of th…
Light-emitting diodes based on perovskite nanocrystals (PNCs-LEDs) have gained great interest for next-generation display and lighting technologies prized for their color purity, high brightness and luminous efficiency approaching the intrinsic limit imposed by extraction of electroluminescence from the device structure. Although the time is ripe for the development of effective light outcoupling strategies to further boost the device performance, this technologically relevant aspect of PNC-LEDs is still without a definitive solution. Here, following theoretical guidelines and without the inte…
Lead-halide perovskites have been attracting attention for potential use in solid-state lighting. Following the footsteps of solar cells, the field of perovskite light-emitting diodes (PeLEDs) has been growing rapidly. Their application prospects in lighting, however, remain still uncertain due to a variety of shortcomings in device performance including their limited levels of luminous efficiency achievable thus far. Here we show high-efficiency PeLEDs based on colloidal perovskite nanocrystals (PeNCs) synthesized at room temperature possessing dominant first-order excitonic radiation (enabli…
The dynamical and static Rashba effects in hybrid methylammonium (MA) lead halide perovskites have recently been theoretically predicted. However, only the static effect was experimentally confirmed so far. Here we report on the dynamical Rashba effect observed using snapshot transient absorption spectral imaging with 400 nm pumping for a fully encapsulated film of 20-nm-sized 3D MAPbBr3 nanocrystals. The effect causes a 240 meV splitting of the lowest-energy absorption bleaching band, initially appearing over sub-ps timescale and progressively stabilizing to 60 meV during 500 ps. The integrat…
Although the structural phase transitions in single-crystal hybrid methyl-ammonium (MA) lead halide perovskites (MAPbX3, X = Cl, Br, I) are common phenomena, they have never been observed in the corresponding nanocrystals. Here we demonstrate that two-photon-excited photoluminescence (PL) spectroscopy is capable of monitoring the structural phase transitions in MAPbX3 nanocrystals because nonlinear susceptibilities govern the light absorption rates. We provide experimental evidence that the orthorhombic-to-tetragonal structural phase transition in a single layer of 20-nm-sized 3D MAPbBr3 nanoc…
The reversible phase transition between orthorhombic and cubic phases is demonstrated in all-inorganic perovskite CsPbIBr2 grown by a dual-source vapor-deposition method. The phase transition is actuated via heating and moisture exposure. The different crystal structures of two phases result in distinct optoelectronic properties including optical absorption, refractive index, and carrier transport. The perovskite photodetector array for the non-volatile rewritable optical memory application is further investigated. A near-infrared (NIR) laser (λ = 1064 nm) is used to selectively heat photodete…
Transition between cooperative emission regimes in giant perovskite nanocrystals
IBM Research Europe – Zurich（IBM欧洲苏黎世研究中心）；Institute of Inorganic Chemistry, Department of Chemistry and Applied Bioscience, ETH Zurich（苏黎世联邦理工学院应用化学与生物科学系无机化学研究所）；Laboratory of Thin Films and Photovoltaics, Empa — Swiss Federal Laboratories for Materials Science and Technology（瑞士联邦材料科技与测试研究院薄膜与光伏实验室）
We study the nature of photo-excited charge carriers in CsPbBr3 nanocrystal thin films by ultrafast optical pump - THz probe spectroscopy. We observe a deviation from a pure Drude dispersion of the THz dielectric response that is ascribed to the polaronic nature of carriers; a transient blueshift of observed phonon frequencies is indicative of the coupling between photogenerated charges and stretching-bending modes of the deformed inorganic sublattice, as confirmed by DFT calculations.
