The Large Intelligent Surface (LIS) concept has emerged recently as a new paradigm for wireless communication, remote sensing and positioning. It consists of a continuous radiating surface placed relatively close to the users, which is able to communicate with users by independent transmission and reception (replacing base stations). Despite of its potential, there are a lot of challenges from an implementation point of view, with the interconnection data-rate and computational complexity being the most relevant. Distributed processing techniques and hierarchical architectures are expected to play a vital role addressing this while ensuring scalability. In this paper we perform algorithm-architecture codesign and analyze the hardware requirements and architecture trade-offs for a discrete LIS to perform uplink detection. By doing this, we expect to give concrete case studies and guidelines for efficient implementation of LIS systems.
With the rapid development of advanced electromagnetic manipulation technologies, researchers and engineers are starting to study smart surfaces that can achieve enhanced coverages, high reconfigurability, and are easy to deploy. Among these efforts, simultaneously transmitting and reflecting intelligent omni-surface (STAR-IOS) is one of the most promising categories. Although pioneering works have demonstrated the benefits of STAR-IOSs in terms of its wireless communication performance gain, several important issues remain unclear including practical hardware implementations and physics-compl…
This paper investigates a multiuser downlink communication system with coexisting intelligent reflecting surface (IRS) and classical half-duplex decode-and-forward (DF) relay. In this system, the IRS and the DF relay interact with each other and assist transmission simultaneously. In particular, active beamforming at the base station (BS) and at the DF relay, and passive beamforming at the IRS, are jointly designed to maximize the sum-rate of all users. The sum-rate maximization problem is nonconvex due to the coupled beamforming vectors. We propose an alternating optimization (AO) based algor…
Intelligent reflective surface (IRS) is an emergent technology for future wireless communications. It consists of a large 2D array of passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we propose two novel channel estimation methods for an IRS-assisted multiple-input multiple-output (MIMO) communication syste…
Reconfigurable Intelligent Surfaces (RIS) are an emerging technology that can be used to reconfigure the propagation environment to improve cellular communication link rates. RIS, which are thin metasurfaces composed of discrete elements, passively manipulate incident electromagnetic waves through controlled reflective phase tuning. In this paper, we investigate co-design of the multiantenna basestation beamforming vector and multielement RIS phase shifts. The downlink narrowband transmission uses sub-6 GHz frequency bands, and the user equipment has a single antenna. Subject to the non-convex…
Large intelligent surface (LIS) has emerged as a promising new solution to improve the energy and spectrum efficiency of wireless networks. A LIS, composed of a large number of low-cost and energy-efficient reconfigurable passive reflecting elements, enhances wireless communications by reflecting impinging electro-magnetic waves. In this paper, we propose a novel passive beamforming and information transfer (PBIT) technique, in which the LIS simultaneously enhances the primary communication and sends information to the receiver. We develop a passive beamforming method to improve the average re…
Multiple-input multiple-output (MIMO) signaling is one of the key technologies of current mobile communication systems. However, the complex and expensive radio frequency (RF) chains have always limited the increase of MIMO scale. In this paper, we propose a MIMO transmission architecture based on a dual-polarized reconfigurable intelligent surface (RIS), which can directly achieve modulation and transmission of multichannel signals without the need for conventional RF chains. Compared with previous works, the proposed architecture can improve the integration of RIS-based transmission systems.…
With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundamental spectral efficiency performance of these architectures. In stark contrast, this paper investigates the implementation aspects of LISs. Using the fully active LIS as the basis of our exposition, …
Rate-splitting multiple access (RSMA) and reconfigurable intelligent surface (RIS) have been both recognized as promising techniques for 6G. The benefits of combining the two techniques to enhance the spectral and energy efficiency have been recently exploited in communication-only networks. Inspired by the recent advances on RIS empowered RSMA, in this work we investigate the use of RIS empowered RSMA for simultaneous wireless information and power transfer (SWIPT) with one transmitter concurrently sending information to multiple information receivers (IRs) and transferring energy to multiple…
Reconfigurable intelligent surface (RIS) is a new paradigm that has great potential to achieve cost-effective, energy-efficient information modulation for wireless transmission, by the ability to change the reflection coefficients of the unit cells of a programmable metasurface. Nevertheless, the electromagnetic responses of the RISs are usually only phase-adjustable, which considerably limits the achievable rate of RIS-based transmitters. In this paper, we propose an RIS architecture to achieve amplitude-and-phase-varying modulation, which facilitates the design of multiple-input multiple-out…
Using radio-frequency (RF) sensing techniques for human posture recognition has attracted growing interest due to its advantages of pervasiveness, contact-free observation, and privacy protection. Conventional RF sensing techniques are constrained by their radio environments, which limit the number of transmission channels to carry multi-dimensional information about human postures. Instead of passively adapting to the environment, in this paper, we design an RF sensing system for posture recognition based on reconfigurable intelligent surfaces (RISs). The proposed system can actively customiz…
Reconfigurable intelligent surfaces (RIS) is a revolutionary technology to cost-effectively improve the performance of wireless networks. We first review the existing framework of channel estimation and passive beamforming (CE & PBF) in RIS-assisted communication systems. To reduce the excessive pilot signaling overhead and implementation complexity of the CE & PBF framework, we conceive a codebook-based framework to strike flexible tradeoffs between communication performance and signaling overhead. Moreover, we provide useful insights into the codebook design and learning mechanisms of the RI…
The work analyzed the positioning of IRS over the coverage region of micro cell to derive optimal placement location to support cell-edge Internet of Things (IoT) devices with a favorable signal-to-interference plus noise ratio (SINR). Moreover, the work derived that the implementation of IRS significantly enhances energy efficiency notably reducing the transmit power of the micro cell base station.
Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We descr…
This paper considers an active intelligent reflecting surface (IRS)-aided wireless powered communication network (WPCN), where devices first harvest energy and then transmit information to a hybrid access point (HAP). Different from the existing works on passive IRS-aided WPCNs, this is the first work that introduces the active IRS in WPCNs. To guarantee fairness, the problem is formulated as an amplifying power-limited weighted sum throughput (WST) maximization problem, which is solved by successive convex approximation technique and fractional programming alternatively. To balance the perfor…
Reconfigurable Intelligent Surfaces (RISs) are envisioned to play a key role in future wireless communications, enabling programmable radio propagation environments. They are usually considered as nearly passive planar structures that operate as adjustable reflectors, giving rise to a multitude of implementation challenges, including an inherent difficulty in estimating the underlying wireless channels. In this paper, we propose the concept of Hybrid RISs (HRISs), which do not solely reflect the impinging waveform in a controllable fashion, but are also capable of sensing and processing a port…
Track-before-detect in RIS-aided Integrated Sensing and Communication
University of Cassino and Southern Lazio（卡西诺与南拉齐奥大学）；Polytechnic University of Milan（米兰理工大学）；European University of Technology EUt+（欧洲技术大学联盟EUt+）；Consorzio Nazionale Interuniversitario per le Telecomunicazioni (CNIT)（意大利国立电信联合协会(CNIT)）
Intelligent reflecting surfaces (IRSs) are regarded as promising enablers for future millimeter wave (mmWave) wireless communication, due to their ability to create favorable line-of-sight (LoS) propagation environments. In this paper, we investigate channel estimation in downlink IRS-assisted mmWave multiple-input multiple-output (MIMO) systems. By leveraging the sparsity of mmWave channels, we formulate the channel estimation problem as a fixed-rank constrained non-convex optimization problem. To tackle the non-convexity, an efficient algorithm is proposed by capitalizing on alternating mini…
Industry 5.0 envisions close cooperation between humans and machines requiring ultra-reliable and low latency communications (URLLC). The Intelligent Reflecting Surface (IRS) has the potential to play a crucial role in realizing wireless URLLC for Industry 5.0. IRS is forecast to be a key enabler of 6G wireless communication networks as it can significantly improve wireless network performance by creating a controllable radio environment. In this paper, we first provide an overview of IRS technology and then conceptualize the potential for IRS implementation in a future smart manufacturing env…
An accurate and simple analytical model for the computation of the reflection amplitude and phase of Reconfigurable Intelligent Surfaces is presented. The model is based on a transmission-line circuit representation of the RIS which takes into account the physics behind the structure including the effect of all relevant geometrical and electrical parameters. The proposed representation of the RIS allows to take into account the effect of incidence angle, mutual coupling among elements and the effect of the interaction of the periodic surface with the RIS ground plane. It is shown that the prop…
Space information networks (SIN) are facing an ever-increasing thirst for high-speed and high-capacity seamless data transmission due to the integration of ground, air, and space communications. However, this imposes a new paradigm on the architecture design of the integrated SIN. Recently, reconfigurable intelligent surfaces (RISs) and mobile edge computing (MEC) are the most promising techniques, conceived to improve communication and computation capability by reconfiguring the wireless propagation environment and offloading. Hence, converging RISs and MEC in SIN is becoming an effort to rea…
Reconfigurable intelligent surface (RIS) is an emerging technology that is under investigation for different applications in wireless communications. RISs are often analyzed and optimized by considering simplified electromagnetic reradiation models. In this chapter, we aim to study the impact of realistic reradiation models for RISs as a function of the sub-wavelength inter-distance between nearby elements of the RIS, the quantization levels of the reflection coefficients, the interplay between the amplitude and phase of the reflection coefficients, and the presence of electromagnetic interfer…
In this work, two problems associated with a downlink multi-user system are considered with the aid of intelligent reflecting surface (IRS): weighted sum-rate maximization and weighted minimal-rate maximization. For the first problem, a novel DOuble Manifold ALternating Optimization (DOMALO) algorithm is proposed by exploiting the matrix manifold theory and introducing the beamforming matrix and reflection vector using complex sphere manifold and complex oblique manifold, respectively, which incorporate the inherent geometrical structure and the required constraint. A smooth double manifold al…
Intelligent reflecting surfaces (IRSs) tune wireless environments to increase spectrum and energy efficiencies. In view of much recent attention to the IRS concept as a promising technology for 6G wireless communications, we present a survey of IRSs in this paper. Specifically, we categorize recent research studies of IRSs as follows. For IRS-aided communications, the summary includes capacity/data rate analyses, power/spectral optimizations, channel estimation, deep learning-based design, and reliability analysis. Then we review IRSs implementations as well as the use of IRSs in secure commun…
