With the rapid development of advanced electromagnetic manipulation technologies, researchers and engineers are starting to study smart surfaces that can achieve enhanced coverages, high reconfigurability, and are easy to deploy. Among these efforts, simultaneously transmitting and reflecting intelligent omni-surface (STAR-IOS) is one of the most promising categories. Although pioneering works have demonstrated the benefits of STAR-IOSs in terms of its wireless communication performance gain, several important issues remain unclear including practical hardware implementations and physics-compliant models for STAR-IOSs. In this paper, we answer these pressing questions of STAR-IOSs by discussing four practical hardware implementations of STAR-IOSs, as well as three hardware modelling methods and five channel modelling methods. These discussions not only categorize existing smart surface technologies but also serve as a physicscompliant pipeline for further investigating the STAR-IOSs.
In this letter, simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) are studied. Compared with the conventional reflecting-only RISs, the coverage of STAR-RISs is extended to 360 degrees via simultaneous transmission and reflection. A general hardware model for STAR-RISs is presented. Then, channel models are proposed for the near-field and the far-field scenarios, base on which the diversity gain of the STAR-RISs is analyzed and compared with that of the conventional RISs. Numerical simulations are provided to verify analytical results and to demonstrate t…
A hardware model and a signal model are proposed for dual-sided simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs), where the signal simultaneously incident on both sides of the surface. Based on the proposed hardware model, signal models for dual-sided STAR-RISs are developed. For elements with scalar surface impedance, it is proved that their transmission and reflection coefficients on both sides are identical. Based on the obtained symmetrical dual-sided STAR model, a STAR-RIS-aided two-user uplink communication system is investigated for both non-ort…
A hardware model for active simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) is proposed consisting of reflection-type amplifiers. The amplitude gains of the STAR element are derived for both coupled and independent phase-shift scenarios. Based on the proposed hardware model, an active STAR-RIS-aided two-user downlink communication system is investigated. Closed-form expressions are obtained for the outage probabilities of both the coupled and independent phase-shift scenarios. To obtain further insights, scaling laws and diversity orders are derived f…
A simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) aided communication system is investigated, where an access point sends information to two users located on each side of the STAR-RIS. Different from current works assuming that the phase-shift coefficients for transmission and reflection can be independently adjusted, which is non-trivial to realize for purely passive STAR-RISs, a coupled transmission and reflection phase-shift model is considered. Based on this model, a power consumption minimization problem is formulated for both non-orthogonal multip…
Different from traditional reflection-only reconfigurable intelligent surfaces (RISs), simultaneously transmitting and reflecting RISs (STAR-RISs) represent a novel technology, which extends the half-space coverage to full-space coverage by simultaneously transmitting and reflecting incident signals. STAR-RISs provide new degrees-of-freedom (DoF) for manipulating signal propagation. Motivated by the above, a novel STAR-RIS assisted non-orthogonal multiple access (NOMA) (STAR-RIS-NOMA) system is proposed in this paper. Our objective is to maximize the achievable sum rate by jointly optimizing t…
In this paper, the novel simultaneously transmitting and reflecting (STAR) reconfigurable intelligent surface (RIS), which enables full-space coverage on users located on both sides of the surface, is investigated in the multi-user mobile edge computing (MEC) system. A computation rate maximization problem is formulated via the joint design of the STAR-RIS phase shifts, reflection and transmission amplitude coefficients, the receive beamforming vectors at the access point, and the users' energy partition strategies for local computing and offloading. Two operating protocols of STAR-RIS, namely…
The opening of the millimeter wave (mmWave) spectrum bands for 5G communications has motivated the need for novel spectrum sharing solutions at these high frequencies. In fact, reconfigurable intelligent surfaces (RISs) have recently emerged to enable spectrum sharing while enhancing the incumbents' quality-of-service (QoS). Nonetheless, co-existence over mmWave bands remains persistently challenging due to their unfavorable propagation characteristics. Hence, initiating mmWave spectrum sharing requires the RIS to further assist in improving the QoS over mmWave bands without jeopardizing spect…
The performance of over-the-air computation (AirComp) systems degrades due to the hostile channel conditions of wireless devices (WDs), which can be significantly improved by the employment of reconfigurable intelligent surfaces (RISs). However, the conventional RISs require that the WDs have to be located in the half-plane of the reflection space, which restricts their potential benefits. To address this issue, the novel family of simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) is considered in AirComp systems to improve the computation accuracy acros…
Intelligent reflecting surface (IRS) has been widely considered as one of the key enabling techniques for future wireless communication networks owing to its ability of dynamically controlling the phase shift of reflected electromagnetic (EM) waves to construct a favorable propagation environment. While IRS only focuses on signal reflection, the recently emerged innovative concept of intelligent omni-surface (IOS) can provide the dual functionality of manipulating reflecting and transmitting signals. Thus, IOS is a new paradigm for achieving ubiquitous wireless communications. In this paper, w…
Reconfigurable intelligent surfaces (RISs) are envisioned as a promising technology for future wireless communications. With various hardware realizations, RISs can work under different modes (reflective/transmissive/hybrid) or have different architectures (single/group/fully-connected). However, most existing research focused on single-connected reflective RISs, mathematically characterized by diagonal phase shift matrices, while there is a lack of a comprehensive study for RISs unifying different modes/architectures. In this paper, we solve this issue by analyzing and proposing a general RIS…
Intelligent omni-surfaces (IOS) have attracted great attention recently due to its potential to achieve full-dimensional communications by simultaneously reflecting and refracting signals toward both sides of the surface. However, it still remains an open question whether the reciprocity holds between the uplink and downlink channels in the IOS-aided wireless communications. In this work, we first present a physics-compliant IOS related channel model, based on which the channel reciprocity is investigated. We then demonstrate the angle-dependent electromagnetic response of the IOS element in t…
In this paper, we consider intelligent omni-surfaces (IOSs), which are capable of simultaneously reflecting and refracting electromagnetic waves. We focus our attention on the multiple-input multiple-output (MIMO) broadcast channel, and we introduce an algorithm for jointly optimizing the covariance matrix at the base station, the matrix of reflection and transmission coefficients at the IOS, and the amount of power that is reflected and refracted from the IOS. The distinguishable feature of this work lies in taking into account that the reflection and transmission coefficients of an IOS are t…
Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted non-orthogonal multiple access (NOMA) communication systems are investigated in its vicinity, where a STAR-RIS is deployed within a predefined region for establishing communication links for users. Both beamformer-based NOMA and cluster-based NOMA schemes are employed at the multi-antenna base station (BS). For each scheme, the STAR-RIS deployment location, the passive transmitting and reflecting beamforming (BF) of the STAR-RIS, and the active BF at the BS are jointly optimized for maximizing the…
The sum-rate performance of simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted full-duplex (FD) communication systems is investigated. The reflection and transmission coefficients of STAR-RIS elements are optimized for the energy splitting and mode switching protocols to maximize the weighted sum rate of the system. The underlying optimization problems are non-convex, and hence, the successive convex approximation technique has been employed to develop efficient algorithms to obtain sub-optimal solutions. Thereby, the maximum average weighted sum ra…
Full-duplex (FD) transmission has already been regarded and developed as a promising method to improve the utilization efficiency of the limited spectrum resource, as transmitting and receiving are allowed to simultaneously occur on the same frequency band. Nowadays, benefiting from the recent development of intelligent reflecting surface (IRS), some unique electromagnetic (EM) functionalities, like wavefront shaping, focusing, anomalous reflection, absorption, frequency shifting, and nonreciprocity can be realized by soft-controlled elements at the IRS, showing the capability of reconfiguring…
In this paper, we study an intelligent omni-surface (IOS)-assisted downlink communication system, where the link quality of a mobile user (MU) can be improved with a proper IOS phase shift design. Unlike the intelligent reflecting surface (IRS) in most existing works that only forwards the signals in a reflective way, the IOS is capable to forward the received signals to the MU in either a reflective or a transmissive manner, thereby enhancing the wireless coverage. We formulate an IOS phase shift optimization problem to maximize the downlink spectral efficiency (SE) of the MU. The optimal pha…
Xi’an Institute of Optics and Precision Mechanics of Chinese Academy of Sciences（中国科学院西安光学精密机械研究所）；Durham University（杜伦大学）；Jinan University（暨南大学）；The University of Manchester（曼彻斯特大学）
Simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) has been considered as a promising auxiliary device to enhance the performance of the wireless network, where users located at the different sides of the surfaces can be simultaneously served by the transmitting and reflecting signals. In this paper, the energy efficiency (EE) maximization problem for a non-orthogonal multiple access (NOMA) assisted STAR-RIS downlink network is investigated. Due to the fractional form of the EE, it is challenging to solve the EE maximization problem by the traditional conv…
Intelligent reflecting surface (IRS) has emerged as a promising technology to reconfigure the radio propagation environment by dynamically controlling wireless signal's amplitude and/or phase via a large number of reflecting elements. In contrast to the vast literature on studying IRS's performance gains in wireless communications, we study in this paper a new application of IRS for sensing/localizing targets in wireless networks. Specifically, we propose a new self-sensing IRS architecture where the IRS controller is capable of transmitting probing signals that are not only directly reflected…
Bistatic backscatter communication (BackCom) allows passive tags to transmit over extended ranges, but at the cost of having carrier emitters either transmitting at high powers or being deployed very close to tags. In this paper, we examine how the presence of an intelligent reflecting surface (IRS) could benefit the bistatic BackCom system. We study the transmit power minimization problem at the carrier emitter, where its transmit beamforming vector is jointly optimized with the IRS phase shifts, whilst guaranteeing a required BackCom performance. A unique feature in this system setup is the …
In the intelligent reflecting surface (IRS)-enhanced wireless communication system, channel state information (CSI) is of paramount importance for achieving the passive beamforming gain of IRS, which, however, is a practically challenging task due to its massive number of passive elements without transmitting/receiving capabilities. In this letter, we propose a practical transmission protocol to execute channel estimation and reflection optimization successively for an IRS-enhanced orthogonal frequency division multiplexing (OFDM) system. Under the unit-modulus constraint, a novel reflection p…
Intelligent reflecting surfaces (IRSs) have emerged as a promising economical solution to implement cell-free networks. However, the performance gains achieved by IRSs critically depend on smartly tuned passive beamforming based on the assumption that the accurate channel state information (CSI) knowledge is available, which is practically impossible. Thus, in this paper, we investigate the impact of the CSI uncertainty on IRS-assisted cell-free networks. We adopt a stochastic programming method to cope with the CSI uncertainty by maximizing the expectation of the sum-rate, which guarantees ro…
Besides improving communication performance, intelligent reflecting surfaces (IRSs) are also promising enablers for achieving larger sensing coverage and enhanced sensing quality. Nevertheless, in the absence of a direct path between the base station (BS) and the targets, multi-target sensing is generally very difficult, since IRSs are incapable of proactively transmitting sensing beams or analyzing target information. Moreover, the echoes of different targets reflected via the IRS-established virtual links share the same directionality at the BS. In this paper, we study a wireless system comp…
QoS Improvement in Multi User Cellular-Symbiotic Radio Network Assisted by Active-STAR-RIS
Department of Electrical and Computer Engineering, Isfahan University of Technology（伊斯法罕理工大学电气与计算机工程系）；Department of Electronics and Communication Engineering, Kuwait College of Science and Technology（科威特科学与技术学院电子与通信工程系）；The Pasargad Institute for Advanced Innovative Solutions (PIAIS)（帕萨尔加德先进创新解决方案研究所）；Electrical and Electronic Engineering Department, London South Bank University（伦敦南岸大学电子与电气工程系）
This work demonstrates the effectiveness of a novel simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) in Full-Duplex (FD) aided communication system. The objective is to minimize the total transmit power by jointly designing the transmit power and the transmitting and reflecting (T&R) coefficients of the STAR-RIS. To solve the nonconvex problem, an efficient algorithm is proposed by utilizing the alternating optimization framework to iteratively optimize variables. Specifically, in each iteration, we drive the closed-form expression for the optimal power de…
In this work, we investigate a novel simultaneous transmission and reflection reconfigurable intelligent surface (RIS)-assisted multiple-input multiple-output downlink system, where three practical transmission protocols, namely, energy splitting (ES), mode selection (MS), and time splitting (TS), are studied. For the system under consideration, we maximize the weighted sum rate with multiple coupled variables. To solve this optimization problem, a block coordinate descent algorithm is proposed to reformulate this problem and design the precoding matrices and the transmitting and reflecting co…
Bilayer intelligent omni-surface (BIOS) has recently attracted increasing attention due to its capability of independent beamforming on both reflection and refraction sides. However, its specific bilayer structure makes the channel estimation problem more challenging than the conventional intelligent reflecting surface (IRS) or intelligent omni-surface (IOS). In this paper, we investigate the channel estimation problem in the BIOS-assisted multi-user multiple-input multiple-output system. We find that in contrast to the IRS or IOS, where the forms of the cascaded channels of all user equipment…
In this letter, we study the simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted unmanned aerial vehicle (UAV) communications. Our goal is to maximize the sum rate of all users by jointly optimizing the STAR-RIS's beamforming vectors, the UAV's trajectory and power allocation. We decompose the formulated non-convex problem into three subproblems and solve them alternately to obtain the solution. Simulations show that: 1) the STAR-RIS achieves a higher sum rate than traditional RIS; 2) to exploit the benefits of STAR-RIS, the UAV's trajectory is clo…
This letter investigates the bit error rate (BER) performance of simultaneous transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) in non-orthogonal multiple access (NOMA) networks. In the investigated network, a STAR-RIS serves multiple non-orthogonal users located on either side of the surface by utilizing the mode switching protocol. We derive the closed-form BER expressions in perfect and imperfect successive interference cancellation cases. Furthermore, asymptotic analyses are also conducted to provide further insights into the BER behavior in the high signal-to-noi…
The novel concept of simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) is investigated, where incident signals can be transmitted and reflected to users located at different sides of the surface. In particular, the fundamental coverage range of STAR-RIS aided two-user communication networks is studied. A sum coverage range maximization problem is formulated for both non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA), where the resource allocation at the access point and the transmission and reflection coefficients at the STAR-RIS a…
Tertiary-Mode STAR-RIS for Secure NOMA: Integrating Transmission, Reflection, and Jamming
Indian Institute of Technology Guwahati（印度果阿哈提印度理工学院）；Indian Institute of Technology (BHU) Varanasi（印度瓦拉纳西印度理工学院（贝拿勒斯））；San Diego State University（圣地亚哥州立大学）
In this letter, we study efficient uplink channel estimation design for a simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted two-user communication systems. We first consider the time switching (TS) protocol for STAR-RIS and propose an efficient scheme to separately estimate the channels of the two users with optimized training (transmission/reflection) pattern. Next, we consider the energy splitting (ES) protocol for STAR-RIS under the practical coupled phase-shift model and devise a customized scheme to simultaneously estimate the channels of bo…
We consider a wireless communication system, where a transmitting source is assisted by both a reconfigurable intelligent reflecting surface (IRS) and a decode-and-forward half-duplex relay (hybrid IRS-relay scheme) to communicate with a destination receiver. All devices are equipped with multiple antennas, and transmissions occur in two stages. In stage 1, the source splits the transmit message into two sub-messages, transmitted to the destination and the relay, respectively, using block diagonalization to avoid interference. Both transmissions will benefit from the IRS. In stage 2, the relay…
Reconfigurable intelligent surface (RIS) has gained much traction due to its potential to manipulate the propagation environment via nearly-passive reconfigurable elements. In our previous work, we have analyzed and proposed a beyond diagonal RIS (BD-RIS) model, which is not limited to traditional diagonal phase shift matrices, to unify different RIS modes/architectures. In this paper, we create a new branch of BD-RIS supporting a multi-sector mode. A multi-sector BD-RIS is modeled as multiple antennas connected to a multi-port group-connected reconfigurable impedance network. More specificall…
