Full-duplex (FD) transmission has already been regarded and developed as a promising method to improve the utilization efficiency of the limited spectrum resource, as transmitting and receiving are allowed to simultaneously occur on the same frequency band. Nowadays, benefiting from the recent development of intelligent reflecting surface (IRS), some unique electromagnetic (EM) functionalities, like wavefront shaping, focusing, anomalous reflection, absorption, frequency shifting, and nonreciprocity can be realized by soft-controlled elements at the IRS, showing the capability of reconfiguring the wireless propagation environment with no hardware cost and nearly zero energy consumption. To jointly exploit the virtues of both FD transmission and IRS, in this article we first introduce several EM functionalities of IRS that are profitable for FD transmission; then, some designs of FD-enabled IRS systems are proposed and discussed, followed by numerical results to demonstrate the obtained benefits. Finally, the challenges and open problems of realizing FD-enabled IRS systems are outlined and elaborated upon.
Low-cost passive intelligent reflecting surfaces (IRSs) have recently been envisioned as a revolutionary technology capable of reconfiguring the wireless propagation environment through carefully tuning reflection elements. This paper proposes deploying an IRS to cover the dead zone of cellular multiuser full-duplex (FD) two-way communication links while suppressing user-side self-interference (SI) and co-channel interference (CI). Based on information exchanged by the base station (BS) and all users, this approach can potentially double the spectral efficiency. To ensure network fairness, we …
Reconfigurable intelligent surfaces (RIS) are a key enabler of various new applications in 6G smart radio environments. By utilizing an RIS prototype system, this paper aims to enhance self-interference (SI) cancellation for in-band full-duplex (FD) communication systems. SI suppression is a crucial requirement for FD communication as the SI severely limits the performance of a node by shadowing the received signal from a distant node with its own transmit signal. To this end, we propose to assist SI cancellation by exploiting an RIS to form a suitable cancellation signal in the analog domain.…
In this paper, we investigate an intelligent reflecting surface (IRS) assisted multi-user multiple-input multiple-output (MIMO) full-duplex (FD) system. We jointly optimize the active beamforming matrices at the access point (AP) and uplink users, and the passive beamforming matrix at the IRS to maximize the weighted sum-rate of the system. Since it is practically difficult to acquire the channel state information (CSI) for IRS-related links due to its passive operation and large number of elements, we conceive a mixed-timescale beamforming scheme. Specifically, the high-dimensional passive be…
This work demonstrates the effectiveness of a novel simultaneous transmission and reflection reconfigurable intelligent surface (STAR-RIS) in Full-Duplex (FD) aided communication system. The objective is to minimize the total transmit power by jointly designing the transmit power and the transmitting and reflecting (T&R) coefficients of the STAR-RIS. To solve the nonconvex problem, an efficient algorithm is proposed by utilizing the alternating optimization framework to iteratively optimize variables. Specifically, in each iteration, we drive the closed-form expression for the optimal power de…
This paper investigates the passive beamforming and deployment design for an intelligent reflecting surface (IRS) aided full-duplex (FD) wireless system, where an FD access point (AP) communicates with an uplink (UL) user and a downlink (DL) user simultaneously over the same time-frequency dimension with the help of IRS. Under this setup, we consider three deployment cases: 1) two distributed IRSs placed near the UL user and DL user, respectively; 2) one centralized IRS placed near the DL user; 3) one centralized IRS placed near the UL user. In each case, we aim to minimize the weighted sum tr…
The sum-rate performance of simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted full-duplex (FD) communication systems is investigated. The reflection and transmission coefficients of STAR-RIS elements are optimized for the energy splitting and mode switching protocols to maximize the weighted sum rate of the system. The underlying optimization problems are non-convex, and hence, the successive convex approximation technique has been employed to develop efficient algorithms to obtain sub-optimal solutions. Thereby, the maximum average weighted sum ra…
Intelligent reflecting surfaces (IRSs) have emerged as a promising wireless technology for the dynamic configuration and control of electromagnetic waves, thus creating a smart (programmable) radio environment. In this context, we study a multi-IRS assisted two-way communication system consisting of two users that employ full-duplex (FD) technology. More specifically, we deal with the joint IRS location and size (i.e., the number of reflecting elements) optimization in order to minimize an upper bound of system outage probability under various constraints: minimum and maximum number of reflect…
In this letter, an intelligent reflecting surface (IRS) enhanced full-duplex MIMO two-way communication system is studied. The system sum rate is maximized through jointly optimizing the source precoders and the IRS phase shift matrix. Adopting the idea of Arimoto-Blahut algorithm, the non-convex optimization problem is decoupled into three sub-problems, which are solved alternatingly. All the sub-problems can be solved efficiently with closed-form solutions. In addition, practical IRS assumptions, e.g., discrete phase shift levels, are also considered. Numerical results verify the convergence…
This paper investigates the use of a reconfigurable intelligent surface (RIS) to aid point-to-point multi-data-stream multiple-input multiple-output (MIMO) wireless communications. With practical finite alphabet input, the reflecting elements at the RIS and the precoder at the transmitter are alternatively optimized to minimize the symbol error rate (MSER). In the reflecting optimization with a fixed precoder, two reflecting design methods are developed, referred as eMSER-Reflecting and vMSER-Reflecting. In the optimization of the precoding matrix with a fixed reflecting pattern, the matrix op…
We study the beamforming optimization for an intelligent reflecting surface (IRS)-aided full-duplex (FD) communication system in this letter. Specifically, we maximize the sum rate of bi-directional transmissions by jointly optimizing the transmit beamforming and the beamforming of the IRS reflection. A fast converging alternating algorithm is developed to tackle this problem. In each iteration of the proposed algorithm, the solutions to the transmit beamforming and the IRS reflect beamforming are obtained in a semi-closed form and a closed form, respectively. Compared to an existing method ba…
In this paper, non-orthogonal multiple access (NOMA) networks assisted by multiple intelligent reflecting surfaces (IRSs) with discrete phase shifts are investigated, in which each user device (UD) is served by an IRS to improve the quality of the received signal. Two scenarios are considered according to whether there is a direct link between the base station (BS) and each UD, and the outage performance is analyzed for each of them. Specifically, the asymptotic expressions for the upper and lower bounds of the outage probability in the high signal-to-noise ratio (SNR) regime are derived. Foll…
Intelligent reflecting surfaces (IRSs) are envisioned to provide reconfigurable wireless environments for future communication networks. In this paper, both downlink and uplink IRS-aided non-orthogonal multiple access (NOMA) and orthogonal multiple access (OMA) networks are studied, in which an IRS is deployed to enhance the coverage by assisting a cell-edge user device (UD) to communicate with the base station (BS). To characterize system performance, new channel statistics of the BS-IRS-UD link with Nakagami-$m$ fading are investigated. For each scenario, the closed-form expressions for the …
We consider computation offloading for edge computing in a wireless network equipped with intelligent reflecting surfaces (IRSs). IRS is an emerging technology and has recently received great attention since they can improve the wireless propagation environment in a configurable manner and enhance the connections between mobile devices (MDs) and access points (APs). At this point not many papers consider edge computing in the novel context of wireless communications aided by IRS. In our studied setting, each MD offloads computation tasks to the edge server located at the AP to reduce the assoc…
Well-designed simultaneously transmitting and reflecting RIS (STAR-RIS), which extends the half-space coverage to full-space coverage, incurs wireless communication environments to be smart and reconfigurable. In this paper, we survey how STAR-RIS affects the performance of full-duplex communication systems with the presence of full-duplex users, wherein the base station (BS) and the uplink users are subject to maximum transmission power constraints. Firstly, the weighted sum-rate (WSR) is derived as a system performance metric. Then, we formulate the resource allocation design into an equival…
This paper investigates a multiuser downlink communication system with coexisting intelligent reflecting surface (IRS) and classical half-duplex decode-and-forward (DF) relay. In this system, the IRS and the DF relay interact with each other and assist transmission simultaneously. In particular, active beamforming at the base station (BS) and at the DF relay, and passive beamforming at the IRS, are jointly designed to maximize the sum-rate of all users. The sum-rate maximization problem is nonconvex due to the coupled beamforming vectors. We propose an alternating optimization (AO) based algor…
In this paper, we investigate a reconfigurable intelligent surface (RIS)-aided multiuser full-duplex secure communication system with hardware impairments at transceivers and RIS, where multiple eavesdroppers overhear the two-way transmitted signals simultaneously, and an RIS is applied to enhance the secrecy performance. Aiming at maximizing the sum secrecy rate (SSR), a joint optimization problem of the transmit beamforming at the base station (BS) and the reflecting beamforming at the RIS is formulated under the transmit power constraint of the BS and the unit modulus constraint of the phas…
Integrated access and backhaul (IAB) facilitates cost-effective deployment of millimeter wave(mmWave) cellular networks through multihop self-backhauling. Full-duplex (FD) technology, particularly for mmWave systems, is a potential means to overcome latency and throughput challenges faced by IAB networks. We derive practical and tractable throughput and latency constraints using queueing theory and formulate a network utility maximization problem to evaluate both FD-IAB and half-duplex(HD)-IAB networks. We use this to characterize the network-level improvements seen when upgrading from convent…
Millimeter wave (mmWave) communications are evolving as a promising technology to meet the ever increasing data rate requirements. However, high directivity and severe path loss make it vulnerable to blockages, which could be frequent in indoor or urban environments. To address this issue, intelligent reflecting surfaces (IRSs) are introduced to provide additional adjustable reflected paths. Most prior works assume that elements of IRSs have an infinite phase resolution, which is difficult to be realized in practical systems. In this paper, IRSs with low-resolution phase shifters are considere…
Reflecting intelligent surfaces (RIS) is a low-cost and energy-efficient solution to achieve high spectral efficiency in sixth-generation (6G) networks. The basic idea of RIS is to smartly reconfigure the signal propagation by using passive reflecting elements. On the other side, the demand of high throughput geostationary (GEO) satellite communications (SatCom) is rapidly growing to deliver broadband services in inaccessible/insufficient covered areas of terrestrial networks. This paper proposes a GEO SatCom network, where a satellite transmits the signal to a ground mobile terminal using mul…
This paper studies intelligent reflecting surface (IRS)-aided full-duplex (FD) wireless-powered communication network (WPCN), where a hybrid access point (HAP) broadcasts energy signals to multiple devices for their energy harvesting in the downlink (DL) and meanwhile receives information signals in the uplink (UL) with the help of IRS. Particularly, we propose three types of IRS beamforming configurations to strike a balance between the system performance and signaling overhead as well as implementation complexity. We first propose the fully dynamic IRS beamforming, where the IRS phase-shift …
This paper presents a theoretical framework to analyze the performance of integrated unmanned aerial vehicle (UAV)-intelligent reflecting surface (IRS) relaying system in which IRS provides an additional degree of freedom combined with the flexible deployment of full-duplex UAV to enhance communication between ground nodes. Our framework considers three different transmission modes: {\bf (i)} UAV-only mode, {\bf (ii)} IRS-only mode, and {\bf (iii)} integrated UAV-IRS mode to achieve spectral and energy-efficient relaying. For the proposed modes, we provide exact and approximate expressions for…
Perfect channel state information (CSI) is challenging to obtain due to the limited signal processing capability at the intelligent reflection surface (IRS). In this paper, we study the worst-case robust beamforming design for an IRS-aided multiuser multiple-input single-output (MU-MISO) system under the assumption of imperfect CSI. We aim for minimizing the transmit power while ensuring that the achievable rate of each user meets the quality of service (QoS) requirement for all possible channel error realizations. With unit-modulus and rate constraints, this problem is non-convex. The imperfe…
Device-to-device (D2D) and non-orthogonal multiple access (NOMA) are promising technologies to meet the challenges of the next generations of mobile communications in terms of network density and diversity for internet of things (IoT) services. This paper tackles the problem of maximizing the D2D sum-throughput in an IoT system underlaying a cellular network, through optimal channel and power allocation. NOMA is used to manage the interference between cellular users and full-duplex (FD) IoT devices. To this aim, mutual successive interference cancellation (SIC) conditions are identified to all…
The use of large arrays might be the solution to the capacity problems in wireless communications. The signal-to-noise ratio (SNR) grows linearly with the number of array elements $N$ when using Massive MIMO receivers and half-duplex relays. Moreover, intelligent reflecting surfaces (IRSs) have recently attracted attention since these can relay signals to achieve an SNR that grows as $N^2$, which seems like a major benefit. In this paper, we use a deterministic propagation model for a planar array of arbitrary size, to demonstrate that the mentioned SNR behaviors, and associated power scaling …
This paper proposes to leverage intelligent reflecting surface (IRS) backscatter to realize radio-frequency-chain-free uplink-transmissions (RFCF-UT). In this communication paradigm, IRS works as an information carrier, whose elements are capable of adjusting their amplitudes and phases to collaboratively portray an electromagnetic image like a dynamic quick response (QR) code, rather than a familiar reflection device, while a full-duplex base station (BS) is used as a scanner to collect and recognize the information on IRS. To elaborate it, an integrated sensing, communication and computation…
Intelligent reflecting surface (IRS) and unmanned aerial vehicle (UAV) have emerged as two promising technologies to boost the performance of wireless communication networks, by proactively altering the wireless communication channels via smart signal reflection and maneuver control, respectively. However, they face different limitations in practice, which restrain their future applications. In this article, we propose new methods to jointly apply IRS and UAV in integrated air-ground wireless networks by exploiting their complementary advantages. Specifically, terrestrial IRS is used to enhanc…
Besides improving communication performance, intelligent reflecting surfaces (IRSs) are also promising enablers for achieving larger sensing coverage and enhanced sensing quality. Nevertheless, in the absence of a direct path between the base station (BS) and the targets, multi-target sensing is generally very difficult, since IRSs are incapable of proactively transmitting sensing beams or analyzing target information. Moreover, the echoes of different targets reflected via the IRS-established virtual links share the same directionality at the BS. In this paper, we study a wireless system comp…
We consider a wireless communication system, where a transmitting source is assisted by both a reconfigurable intelligent reflecting surface (IRS) and a decode-and-forward half-duplex relay (hybrid IRS-relay scheme) to communicate with a destination receiver. All devices are equipped with multiple antennas, and transmissions occur in two stages. In stage 1, the source splits the transmit message into two sub-messages, transmitted to the destination and the relay, respectively, using block diagonalization to avoid interference. Both transmissions will benefit from the IRS. In stage 2, the relay…
This paper proposes a novel relay-aided intelligent reconfigurable surface (IRS) architecture for future wireless communication systems. The proposed architecture, which consists of two side-by-side intelligent surfaces connected via a full-duplex relay, has the potential of achieving the promising gains of intelligent surfaces while requiring much smaller numbers of reflecting elements. Consequently, the proposed IRS architecture needs significantly less channel estimation and beam training overhead and provides higher robustness compared to classical IRS approaches. Further, thanks to dividi…
The cognitive radio (CR) network is a promising network architecture that meets the requirement of enhancing scarce radio spectrum utilization. Meanwhile, reconfigurable intelligent surfaces (RIS) is a promising solution to enhance the energy and spectrum efficiency of wireless networks by properly altering the signal propagation via tuning a large number of passive reflecting units. In this paper, we investigate the downlink transmit power minimization problem for the RIS-enhanced single-cell cognitive radio (CR) network coexisting with a single-cell primary radio (PR) network by jointly opti…
