Intelligent reflective surface (IRS) is an emergent technology for future wireless communications. It consists of a large 2D array of passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we propose two novel channel estimation methods for an IRS-assisted multiple-input multiple-output (MIMO) communication system. Assuming a structured time-domain pattern of pilots and IRS phase shifts, we show that the received signal follows a parallel factor (PARAFAC) tensor model that can be exploited to estimate the involved communication channels in closed-form or iteratively. Numerical results corroborate the effectiveness of the proposed channel estimation methods and highlight the involved tradeoffs.
In this letter, a novel nested PARAFAC algorithm was proposed to improve the 8D parameters estimation performance for the bistatic EMVS-MIMO radar. Firstly, the outer part PARAFAC algorithm was carried out to estimate the receive spatial response matrix and its first way factor matrix. For the estimated first way factor matrix, a theory is given to rearrange its data into an new matrix, which is the mode-1 unfolding matrix of a three-way tensor. Then, the inner part PARAFAC algorithm was used to estimate the transmit steering vector matrix, the transmit spatial response matrix and the receive …
Intelligent reflective surfaces (IRSs) are invoked for improving both spectral efficiency (SE) and energy efficiency (EE). Specifically, an IRS-aided multiple-input multiple-output network is considered, where the performance of randomly roaming users is analyzed by utilizing stochastic geometry tools. As such, to distinguish the superposed signals at each user, the passive beamforming weight at the IRSs and detection weight vectors at the users are jointly designed. As a benefit, by adopting a zero-forcing-based design, the intra-cell interference imposed by the IRS can be suppressed. In orde…
Intelligent reflecting surface (IRS) is an emerging technology for future wireless communications including 5G and especially 6G. It consists of a large 2D array of (semi-)passive scattering elements that control the electromagnetic properties of radio-frequency waves so that the reflected signals add coherently at the intended receiver or destructively to reduce co-channel interference. The promised gains of IRS-assisted communications depend on the accuracy of the channel state information. In this paper, we address the receiver design for an IRS-assisted multiple-input multiple-output (MIMO…
One of the use cases for 5G systems and beyond is ultra-reliability low-latency communication (URLLC). An enabling technology for URLLC is massive multiple-input multiple-output (MIMO), which can increase reliability due to improved user separation, array gain and the channel hardening effect. Measurements have been performed in an operating factory environment at 3.7 GHz with a co-located massive MIMO array and a unique randomly distributed array. Channel hardening can appear when the number of antennas is increased such that the variations of channel gain (small-scale fading) is decreased an…
The accurate estimation of Channel State Information (CSI) is of crucial importance for the successful operation of Multiple-Input Multiple-Output (MIMO) communication systems, especially in a Multi-User (MU) time-varying environment and when employing the emerging technology of Reconfigurable Intelligent Surfaces (RISs). Their predominantly passive nature renders the estimation of the channels involved in the user-RIS-base station link a quite challenging problem. Moreover, the time-varying nature of most of the realistic wireless channels drives up the cost of real-time channel tracking sign…
This work studies the modelling and the optimization of intelligent reflecting surface (IRS) assisted multiple-input multiple-output (MIMO) systems through cascaded line-of-sight (LoS) links. In Part I of this work, we build up a new IRS-aided MIMO channel model, named the cascaded LoS MIMO channel. The proposed channel model consists of a transmitter (Tx) and a receiver (Rx) both equipped with uniform linear arrays, and an IRS is used to enable communications between the transmitter and the receiver through the LoS links seen by the IRS. When modeling the reflection of electromagnetic waves a…
This paper studies the estimation of cascaded channels in passive intelligent reflective surface (IRS)- aided multiple-input multiple-output (MIMO) systems employing hybrid precoders and combiners. We propose a low-complexity solution that estimates the channel parameters progressively. The angles of departure (AoDs) and angles of arrival (AoAs) at the transmitter and receiver, respectively, are first estimated using inductive matrix completion (IMC) followed by root-MUSIC based super-resolution spectrum estimation. Forward-backward spatial smoothing (FBSS) is applied to address the coherence …
Deep-Learning-Aided Alternating Least Squares for Tensor CP Decomposition and Its Application to Massive MIMO Channel Estimation
State Key Laboratory of Advanced Rail Autonomous Operation（先进轨道交通自主运行全国重点实验室）；School of Electronic and Information Engineering, Beijing Jiaotong University（北京交通大学电子信息工程学院）；Department of Microelectronics, Delft University of Technology（代尔夫特理工大学微电子学系）
Channel acquisition is one of the main challenges for the deployment of reconfigurable intelligent surface (RIS) aided communication systems. This is because an RIS has a large number of reflective elements, which are passive devices with no active transmitting/receiving abilities. In this paper, we study the channel estimation problem for the RIS aided multi-user millimeter-wave (mmWave) multi-input multi-output (MIMO) system. Specifically, we propose a novel channel estimation protocol for the above system to estimate the cascaded channels, which are the products of the channels from the bas…
This paper considers an intelligent reflecting surface (IRS) assisted multi-input multi-output (MIMO) power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) system with multiple PS receivers (PSRs). The objective is to maximize the achievable data rate of the system by jointly optimizing the PS ratios at the PSRs, the active transmit beamforming (ATB) at the access point (AP), and the passive reflective beamforming (PRB) at the IRS, while the constraints on maximum transmission power at the AP, the reflective phase shift of each element at the IRS, the individu…
In this paper, we investigate a simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisting a massive multiple-input multiple-output (mMIMO) system. In particular, we derive a closed-form expression for the coverage probability of a STAR-RIS assisted mMIMO system while accounting for correlated fading and phase-shift errors. Notably, the phase configuration takes place at every several coherence intervals by optimizing the coverage probability since the latter depends on statistical channel state information (CSI) in terms of large-scale statistics. As a re…
We present the statistical characterization of a 2x2 Multiple-Input Multiple-Output wireless link operated in a mode-stirred enclosure, with channel state information available only at the receiver (agnostic transmitter). Our wireless channel measurements are conducted in absence of line of sight and varying the inter-element spacing between the two antenna elements in both the transmit and receive array. The mode-stirred cavity is operated: i) at a low number of stirrer positions to create statistical inhomogeneity; ii) at two different loading conditions, empty and with absorbers, in order t…
Signal processing and communication communities have witnessed the rise of many exciting communication technologies in recent years. Notable examples include alternative waveforms, massive multiple-input multiple-output (MIMO) signaling, non-orthogonal multiple access (NOMA), joint communications and sensing, sparse vector coding, index modulation, and so on. It is inevitable that 6G wireless networks will require a rethinking of wireless communication systems and technologies, particularly at the physical layer (PHY), considering the fact that the cellular industry reached another important m…
Capacity-Net-Based RIS Precoding Design without Channel Estimation for mmWave MIMO System
Institute of Communication Engineering (ICE), National Sun Yat-sen University (NSYSU)（通信工程研究所，国立中山大学）；Research Center for Information Technology Innovation (CITI), Academia Sinica (AS)（资讯科技创新研究中心，中华学术院）；Department of Electrical Engineering, National Ilan University (NIU)（电气工程系，国立宜兰大学）
The recently completed 5G new radio standard is a result of several cutting-edge technologies, including massive multiple-input multiple-output (MIMO), millimeter (mm)-Wave communication and network densification. However, these technologies face two main practical limitations 1) the lack of control over the wireless channel, and 2) the high power consumption of the wireless interface. To address the need for green and sustainable future cellular networks, the concept of reconfiguring wireless propagation environments using Intelligent Reflecting Surfaces (IRS)s has emerged. An IRS comprises o…
