With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundamental spectral efficiency performance of these architectures. In stark contrast, this paper investigates the implementation aspects of LISs. Using the fully active LIS as the basis of our exposition, we first present a rigorous discussion on the relative merits and disadvantages of possible implementation architectures from a radio-frequency circuits and real-time processing viewpoints. We then show that a distributed architecture based on a common module interfacing a smaller number of antennas can be scalable. To avoid severe losses with analog signal distribution, multiple common modules can be interconnected via a digital nearest-neighbor network. Furthermore, we show that with such a design, the maximum backplane throughput scales with the number of served user terminals, instead of the number of antennas across the surface. The discussions in the paper can serve as a guideline toward the real-time design and development of LISs.
Multiple-input multiple-output (MIMO) signaling is one of the key technologies of current mobile communication systems. However, the complex and expensive radio frequency (RF) chains have always limited the increase of MIMO scale. In this paper, we propose a MIMO transmission architecture based on a dual-polarized reconfigurable intelligent surface (RIS), which can directly achieve modulation and transmission of multichannel signals without the need for conventional RF chains. Compared with previous works, the proposed architecture can improve the integration of RIS-based transmission systems.…
Reconfigurable intelligent surface (RIS) is a new paradigm that has great potential to achieve cost-effective, energy-efficient information modulation for wireless transmission, by the ability to change the reflection coefficients of the unit cells of a programmable metasurface. Nevertheless, the electromagnetic responses of the RISs are usually only phase-adjustable, which considerably limits the achievable rate of RIS-based transmitters. In this paper, we propose an RIS architecture to achieve amplitude-and-phase-varying modulation, which facilitates the design of multiple-input multiple-out…
In this paper, we survey state-of-the-art research outcomes in the burgeoning field of reconfigurable intelligent surface (RIS) in view of its potential for significant performance enhancement for next generation wireless communication networks by means of adapting the propagation environment. Emphasis has been placed on several aspects gating the commercially viability of a future network deployment. Comprehensive summaries are provided for practical hardware design considerations and broad implications of artificial intelligence techniques, so are in-depth outlooks on salient aspects of syst…
The cellular internet of things (CIoT) has become an important branch to cater various applications of IoT devices. Within CIoT, the radio resource control (RRC) layer is responsible for fundamental functionalities such as connection control and bearer establishment in radio access network (RAN). The emergence of various IoT scenarios and diversified service requirements have made both RAN slicing and intelligent control imperative requirement in RRC layer. This paper focuses on enhancing standardized capabilities of CIoT RRC layer, by designing and implementing a new architecture which accomm…
Reconfigurable intelligent surface (RIS)-assisted communication appears as one of the potential enablers for sixth generation (6G) wireless networks by providing a new way to optimize the communication system performance. This paper aims to fill an important gap in the open literature by providing an accurate, source, and widely applicable RIS channel model for mmWave frequencies. Our model is not only applicable in various indoor and outdoor environments but also includes the physical aspects of wireless propagation in the presence of an RIS as well as various practical 5G channel modeling is…
Terahertz (THz) communications have emerged as a promising candidate to support the heavy data traffic and exploding network capacity in the future 6G wireless networks. However, THz communications are facing many challenges for practical implementation, such as propagation loss, signal blockage, and hardware cost. In this article, an emerging paradigm of intelligent reflecting surface (IRS) assisted THz communications is analyzed, to address the above issues, by leveraging the joint active and passive beamforming to enhance the communication quality and reduce overheads. Aiming at practical i…
The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) wave. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In th…
Intelligent reflecting surfaces (IRSs) are regarded as promising enablers for future millimeter wave (mmWave) wireless communication, due to their ability to create favorable line-of-sight (LoS) propagation environments. In this paper, we investigate channel estimation in downlink IRS-assisted mmWave multiple-input multiple-output (MIMO) systems. By leveraging the sparsity of mmWave channels, we formulate the channel estimation problem as a fixed-rank constrained non-convex optimization problem. To tackle the non-convexity, an efficient algorithm is proposed by capitalizing on alternating mini…
An accurate and simple analytical model for the computation of the reflection amplitude and phase of Reconfigurable Intelligent Surfaces is presented. The model is based on a transmission-line circuit representation of the RIS which takes into account the physics behind the structure including the effect of all relevant geometrical and electrical parameters. The proposed representation of the RIS allows to take into account the effect of incidence angle, mutual coupling among elements and the effect of the interaction of the periodic surface with the RIS ground plane. It is shown that the prop…
Intelligent reflecting surface (IRS)-assisted wireless communication is widely deemed a key technology for 6G systems. The main challenge in deploying an IRS-aided terahertz (THz) link, though, is the severe propagation losses at high frequency bands. Hence, a THz IRS is expected to consist of a massive number of reflecting elements to compensate for those losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves must be taken into account. In this work, we focus on the near-field and analytically det…
In a recent work, Nazer and Gastpar proposed the Compute-and-Forward strategy as a physical-layer network coding scheme. They described a code structure based on nested lattices whose algebraic structure makes the scheme reliable and efficient. In this work, we consider the implementation of their scheme for real Gaussian channels and one dimensional lattices. We relate the maximization of the transmission rate to the lattice shortest vector problem. We explicit, in this case, the maximum likelihood criterion and show that it can be implemented by using an Inhomogeneous Diophantine Approximati…
This paper studies the uplink spectral efficiency (SE) achieved by two single-antenna user equipments (UEs) communicating with a Large Intelligent Surface (LIS), defined as a planar array consisting of $N$ antennas that each has area $A$. The analysis is carried out with a deterministic line-of-sight propagation channel model that captures key fundamental aspects of the so-called geometric near-field of the array. Maximum ratio (MR) and minimum mean squared error (MMSE) combining schemes are considered. With both schemes, the signal and interference terms are numerically analyzed as a function…
Reconfigurable intelligent surfaces (RISs) have been considered as a promising technology for the sixth-generation (6G) wireless networks that can control wireless channels in a desirable way and significantly enhance the network performance. Simultaneous transmitting and reflecting-RISs (STAR-RISs) can overcome limitation of reflecting-only RISs by leveraging the higher design flexibility and full-space coverage. Despite the benefits, the modeling and analysis of STAR-RISs are complicated because of various control parameters for both transmission and reflection links. In this article, a gene…
Channel modeling is a critical issue when designing or evaluating the performance of reconfigurable intelligent surface (RIS)-assisted communications. Inspired by the promising potential of learning-based methods for characterizing the radio environment, we present a general approach to model the RIS end-to-end equivalent channel using the unsupervised expectation-maximization (EM) learning algorithm. We show that an EM-based approximation through a simple mixture of two Nakagami-$m$ distributions suffices to accurately approximating the equivalent channel, while allowing for the incorporation…
Intelligent reflecting surfaces (IRSs) tune wireless environments to increase spectrum and energy efficiencies. In view of much recent attention to the IRS concept as a promising technology for 6G wireless communications, we present a survey of IRSs in this paper. Specifically, we categorize recent research studies of IRSs as follows. For IRS-aided communications, the summary includes capacity/data rate analyses, power/spectral optimizations, channel estimation, deep learning-based design, and reliability analysis. Then we review IRSs implementations as well as the use of IRSs in secure commun…
Large intelligent surface/antennas (LISA), a two-dimensional artificial structure with a large number of reflective-surface/antenna elements, is a promising reflective radio technology to construct programmable wireless environments in a smart way. Specifically, each element of the LISA adjusts the reflection of the incident electromagnetic waves with unnatural properties, such as negative refraction, perfect absorption, and anomalous reflection, thus the wireless environments can be software-defined according to various design objectives. In this paper, we introduce the reflective radio basic…
The key advantage of successive relaying (SR) networks is their ability to mimic the full-duplex (FD) operation with half-duplex (HD) relays. However, the main challenge that comes with such schemes is the associated inter-relay interference (IRI). In this work, we propose a reconfigurable intelligent surface (RIS)-enhanced SR network, where one RIS is deployed near each of the two relay nodes to provide spatial suppression of IRI, and to maximize the gain of desired signals. The resultant max-min optimization problem with joint phase-shift design for both RISs is first tackled via the semidef…
In this work, two problems associated with a downlink multi-user system are considered with the aid of intelligent reflecting surface (IRS): weighted sum-rate maximization and weighted minimal-rate maximization. For the first problem, a novel DOuble Manifold ALternating Optimization (DOMALO) algorithm is proposed by exploiting the matrix manifold theory and introducing the beamforming matrix and reflection vector using complex sphere manifold and complex oblique manifold, respectively, which incorporate the inherent geometrical structure and the required constraint. A smooth double manifold al…
Reconfigurable intelligent surface (RIS)-empowered communication is being considered as an enabling technology for sixth generation (6G) wireless networks. The key idea of RIS-assisted communication is to enhance the capacity, coverage, energy efficiency, physical layer security, and many other aspects of modern wireless networks. At the same time, mobile edge computing (MEC) has already shown its huge potential by extending the computation, communication, and caching capabilities of a standalone cloud server to the network edge. In this article, we first provide an overview of how MEC and RIS…
