A model is presented for predicting the open-circuit voltage (OCV) and lithium distribution within lithium-ion anodes containing multiple materials, coupling linear elasticity with a stress-dependent chemical potential. The model is applied to a spherical radially-symmetric nano-particle with a silicon core and a graphite shell, highlighting the large effect on lithium distribution and OCV caused by the stress-coupling. Various performance measures based on the expanded volume, the amount of lithium intercalated and the maximum stress induced, are calculated for a silicon core with a graphite shell to enable optimisation of the volume of the silicon core.
Employing two-dimensional (2D) materials as anodes for lithium-ion batteries (LIBs) is believed to be an effective approach to meet the growing demands of high-capacity next-generation LIBs. In this work, the first-principles density functional theory (DFT) calculations are employed to evaluate the potential application of two-dimensional phosphorus carbide (2D PCx, x=2, 5, and 6) monolayers as anode materials for lithium-ion batteries. The 2D PCx systems are predicted to show outstanding structural stability and electronic properties. From the nudge elastic band calculations, the Li atoms sho…
Lithium metal cells are key towards achieving high specific energy and energy density for electrification of transportation and aviation. Anode-free cells are the limiting case of lithium metal cells involving no excess lithium and the highest possible specific energy. In addition, anode-free cells are easier, cheaper and safer as they avoid handling and manufacturing of lithium metal foils. Issues related to dendrite growth and poor cycling are magnified in anode-free cells due to lack of excess lithium. Electrolyte and current collector surface play a crucial role in affecting the cycling pe…
Rate-Dependent Reversibility and Lithium Losses in Hybrid Anode-Collector Metal Electrodes
Departamento de Física de la Materia Condensada, Universidad Autónoma de Madrid（马德里自治大学凝聚态物理系）；Instituto Universitario de Ciencia de Materiales Nicolás Cabrera (INC), Universidad Autónoma de Madrid（马德里自治大学尼古拉斯·卡布雷拉材料科学大学研究所）；Centro de Micro-Análisis de Materiales (CMAM), Universidad Autónoma de Madrid（马德里自治大学材料微分析中心）；Condensed Matter Physics Center (IFIMAC), Universidad Autónoma de Madrid（马德里自治大学凝聚态物理中心）
Effective passivation of lithium metal surfaces, and prevention of battery-shorting lithium dendrite growth, are critical for implementing lithium-metal-anodes for batteries with increased power densities. Nanoscale surface heterogeneities can be "hot spots" where anode passivation breaks down. Motivated by the observation of lithium dendrites in pores and grain boundaries in all-solid batteries, we examine lithium metal surfaces covered with Li(2)O and/or LiF thin films with grain boundaries in them. Electronic structure calculations show that, at >0.25 V computed equilibrium overpotential, L…
Li-ion rechargeable batteries have enabled the wireless revolution transforming global communication. Future challenges, however, demands distributed energy supply at a level that is not feasible with the current energy-storage technology. New materials, capable of providing higher energy density are needed. Here we report a new class of lithium-ion batteries based on a graphene ink anode and a lithium iron phosphate cathode. By carefully balancing the cell composition and suppressing the initial irreversible capacity of the anode, we demonstrate an optimal battery performance in terms of spec…
Inspired by a recent experimental and theoretical study [Yang et al., 2017], wherein protrusions in graphene have been proposed as an effective strategy to enhance the performance of sodium ion batteries, a comprehensive study of the effects of phosphorus doping in graphene on adsorption and diffusion behaviour of Li is carried out by using density functional theory. We find that protrusion introduced by P-dopant in graphene enhances the adsorption of a single Li atom onto the anode due to an additional partial covalent bonding character between Li and carbon atoms of the substrate. However, w…
In this paper, Al-Cu-Fe quasicrystal alloy was used as anode material of lithium-ion batteries. The first specific discharge capacity of quasicrystal was 204mAh/g. Cyclic voltammetry showed that oxidation peak of Al-Cu-Fe quasicrystal was at about 1.4V. The reduction peak was at 0.3V. Al-Cu-Fe quasicrystal have higher Li-ion diffusion impedance and Warburg in the first cycle. X-ray diffraction analysis demonstrate that Li atom enter into quasicrystal structure can not fully leave quasicrytal during first charge/discharge cycle which induce the irreversible capacity.
Silicon suboxide is currently considered as a unique candidate for lithium ion batteries anode materials due to its considerable capacity. However, no adequate information exist about the role of oxygen content on its performance. To this aim, we used density functional theory to create silicon suboxide matrices of various Si:O ratios and investigated the role of oxygen content on the structural, dynamic, electronic properties and lithiation behavior of the matrices. Our study demonstrates that the O atoms interact strongly with the inserted Li atoms resulting in a disintegration of the host m…
Downsizing well-established materials to the nanoscale is a key route to novel functionalities, in particular if different functionalities are merged in hybrid nanomaterials. Hybrid carbon-based hierarchical nanostructures are particularly promising for electrochemical energy storage since they combine benefits of nanosize effects, enhanced electrical conductivity and integrity of bulk materials. We show that endohedral multiwalled carbon nanotubes (CNT) encapsulating high-capacity (here: conversion and alloying) electrode materials have a high potential for use in anode materials for lithium-…
Phosphorus has received recent attention in the context of high-capacity and high-rate anodes for lithium and sodium-ion batteries. Here, we present a first principles structure prediction study combined with NMR calculations which gives us insights into its lithiation/sodiation process. We report a variety of new phases phases found by AIRSS and the atomic species swapping methods. Of particular interest, a stable Na$_5$P$_4$-C2/m structure and locally stable structures found less than 10 meV/f.u. from the convex hull, such as Li$_4$P$_3$-P2$_1$2$_1$2$_1$, NaP$_5$-Pnma and Na$_4$P$_3$-Cmcm. T…
Lithium ion batteries (LIB) can feature reactive anodes that operate at low potentials, such as lithium metal or silicon, passivated by solid electrolyte interphase (SEI) films. SEI is known to evolve over time as cycling proceeds. In this modeling work, we focus on the stability of two main SEI components, lithium carbonate (Li2CO3) and lithium ethylene dicarbonate (LEDC). Both components are electrochemically stable but thermodynamically unstable near the equilibrium Li+/Li(s) potential. Interfacial reactions represent one way to trigger the intrinsic thermodynamic instability. Both Li(2)CO(…
Hollow carbon spheres (HCS) covered with metal oxide nanoparticles (SnO2 and MnO2, respectively) were successfully synthesized and investigated regarding their potential as anode materials for lithium-ion batteries. Raman spectroscopy shows a high degree of graphitization for the HCS host structure. The mesoporous nature of the nanocomposites is confirmed by Brunauer-Emmett-Teller analysis. For both metal oxides under study, the metal oxide functionalization of HCS yields a significant increase of electrochemical performance. The charge capacity of HCS/SnO2 is 370 mAh/g after 45 cycles (266 mA…
We developed two-step solution-phase reactions to form hybrid materials of Mn3O4 nanoparticles on reduced graphene oxide (RGO) sheets for lithium ion battery applications. Mn3O4 nanoparticles grown selectively on RGO sheets over free particle growth in solution allowed for the electrically insulating Mn3O4 nanoparticles wired up to a current collector through the underlying conducting graphene network. The Mn3O4 nanoparticles formed on RGO show a high specific capacity up to ~900mAh/g near its theoretical capacity with good rate capability and cycling stability, owing to the intimate interacti…
Designing anode materials with high lithium specific capacity is crucial to the development of high energy-density lithium ion batteries. Herein, a distinctive lithium growth mechanism, namely, the restricted multilayered growth for lithium, and a strategy for lithium storage are proposed to achieve the balance between the ultra-high specific capacity and the need to avert uncontrolled dendritic growth of lithium. In particular, based on first-principles computation, we show that the Al2C monolayer with planar tetracoordinate carbon structure can be an ideal platform for realizing the restrict…
The decomposition of ethylene carbonate (EC) during the initial growth of solid-electrolyte interphase (SEI) films at the solvent-graphitic anode interface is critical to lithium ion battery operations. Ab initio molecular dynamics simulations of explicit liquid EC/graphite interfaces are conducted to study these electrochemical reactions. We show that carbon edge terminations are crucial at this stage, and that achievable experimental conditions can lead to surprisingly fast EC breakdown mechanisms, yielding decomposition products seen in experiments but not previously predicted.
A rechargeable lithium metal battery (LMB), which uses metallic lithium at the anode, is among the most promising technologies for next generation electrochemical energy storage devices due to its high energy density, particularly when Li is paired with energetic conversion cathodes such as sulfur, oxygen/air, and carbon dioxide. Practical LMBs in any of these designs remain elusive due to multiple stubborn problems, including parasitic reactions of Li metal with liquid electrolytes, unstable/dendritic electrodeposition at the anode during cell recharge, and chemical reaction of dissolved cath…
MoO2/C-composites have been fabricated for the first time by a tartaric acid/glucose-assisted sol-gel method with post-annealing at 500 °C for 1 h in N2 flow. The synthesized materials were fully characterized with respect to structure, morphology, and electrochemical properties. Compared with tartaric acid-assisted products, the adoption of glucose as carbon source effectively increases the carbon content in the composites. Irrespective of the organic component, the composites exhibit low crystallinity and small grain size. This results in good electrochemical performance of the anode materia…
It is shown that continuously occurring electrolyte-reduction reaction on freshly-exposed electrode surfaces during lithiation/delithiation cycles causes the lowering of cycling efficiency, and hence, capacity fade in well-cycled silicon anodes in lithium-ion batteries. Using galvanostatic lithiation/delithiation data from multiple cycles on a Li/Si half-cell, a methodology to separate the charge due to the main reaction (lithiation/delithiation of Si) from the side-reaction (electrolyte-reduction) is presented. The rate of this parasitic side reaction is estimated on well-cycled amorphous sil…
To explore the potential of molecular gas treatment of freshly cut lithium foils in non-electrolyte based passivation of high energy-density Li anodes, density functional theory (DFT) has been used to study the decomposition of molecular gases on metallic lithium surfaces. By combining DFT geometry optimization and Molecular Dynamics, the effects of atmospheric (N2, O2, CO2) and hazardous (F2, SO2) gas decomposition on Li(bcc) (100), (110), and (111) surfaces on relative surface energies, work functions, and emerging electronic and elastic properties are investigated. The simulations suggest t…
Lithium metal has been an attractive candidate as a next generation anode material. Despite its popularity, stability issues of lithium in the liquid electrolyte and the formation of lithium whiskers have kept it from practical use. Three-dimensional (3D) current collectors have been proposed as an effective method to mitigate whiskers growth. Although extensive research efforts have been done, the effects of three key parameters of the 3D current collectors, namely the surface area, the tortuosity factor, and the surface chemistry, on the performance of lithium metal batteries remain elusive.…
The market quest for fast-charging, safe, long-lasting and performant batteries drives the exploration of new energy storage materials, but also promotes fundamental investigations of materials already widely used. Presently, revamped interest in anode materials is observed -- primarily graphite electrodes for lithium-ion batteries. Here, we focus on the upper limit of lithium intercalation in the morphologically quasi-ideal highly oriented pyrolytic graphite (HOPG), with a LiC$_6$ stoichiometry corresponding to 100\% state of charge (SOC). We prepared a sample by immersion in liquid lithium a…
Finding electrode materials with high capacity is a key challenge for developing Lithium-ion batteries (LIBs). Graphene was once expected to be a promising candidate, but it turns out to be too inert to interact with Li. Here, by using the first-principles calculations, we predict that Germanium doped graphene, termed as Germagraphene which has been achieved in recent experiment, is a promising LIB anode material. We find that at the optimal Ge concentration, which corresponds to the chemical formula C17Ge, the specific capacity for Germagraphene can be as high as 1734 mAh/g, over four times l…
The prospects of phosphorene as an anode material for high performance Li-ion battery was systematically investigated from the first principle calculations and experimental measurements. The diffusion energy barriers of a Li atom moving along various orientations on phosphorene layer were calculated from the Li adsorption energy landscape. It was found that the diffusion mobility of a Li atom along the zigzag direction in the valley of phosphorene could be about 7 to 11 orders of magnitude faster than that along the other directions, indicating its ultrafast and anisotropic diffusivity. The li…
Many key performance characteristics of carbon-based lithium-ion battery anodes are largely determined by the strength of binding between lithium (Li) and sp2 carbon (C), which can vary significantly with subtle changes in substrate structure, chemistry, and morphology. Here, we use density functional theory calculations to investigate the interactions of Li with a wide variety of sp2 C substrates, including pristine, defective, and strained graphene; planar C clusters; nanotubes; C edges; and multilayer stacks. In almost all cases, we find a universal linear relation between the Li-C binding …
Solid state battery technology has recently garnered considerable interest from companies including Toyota, BMW, Dyson, and others. The primary driver behind the commercialization of solid state batteries (SSBs) is to enable the use of lithium metal as the anode, as opposed to the currently used carbon anode, which would result in ~20% energy density improvement. However, no reported solid state battery to date meets all of the performance metrics of state of the art liquid electrolyte lithium ion batteries (LIBs) and indeed several solid state electrolyte (SSE) technologies may never reach pa…
The development of silicon anodes to replace conventional graphite in efforts to increase energy densities of lithium-ion batteries has been largely impeded by poor interfacial stability against liquid electrolytes. Here, stable operation of 99.9 weight% micro-Si (uSi) anode is enabled by utilizing the interface passivating properties of sulfide based solid-electrolytes. Bulk to surface characterization, as well as quantification of interfacial components showed that such an approach eliminates continuous interfacial growth and irreversible lithium losses. In uSi || layered-oxide full cells, h…
Rechargeable lithium metal batteries have been widely investigated recently, driven by the global trend for the electrification of transportation. Understanding the dynamics of lithium metal electrodeposition is crucial to design safe and reliable lithium metal anodes. In this study, we developed a grand potential-based phase-field model to investigate the effect of a static gas bubble, which forms due to the complicated internal side reactions, on the dynamics of the dendrite growth during electrodeposition. It is observed that with the presence of a gas bubble, the dendrite growth is largely…
Li3VO4/C composites have been synthesized by a sol-gel method and post-annealing at 650 °C for 1 h in N2 flow using either tartaric acid, malic acid, or glucose as both chelating agents and carbon source. The presence of these organic additives crucially affects morphology and crystallite size of the final product. It is found that the electrochemical properties of Li3VO4/C as anode material for Li-ion batteries (LIBs) are influenced by the morphology, texture and carbon content of the material. When using carboxylic acids as carbon source composites with mesoporous structure and a high surfac…
High-performance anodes for rechargeable Li-ion battery are produced by nanostructuring of the transition metal oxides on a conductive support. Here, we demonstrate a hybrid material of MnO2 directly grown onto fabrics of carbon nanotube fibres, which exhibits notable specific capacity over 1100 and 500 mAh/g at a discharge current density of 25 mA/g and 5 A/g, respectively, with coulombic efficiency of 97.5 %. Combined with 97 % capacity retention after 1500 cycles at a current density of 5 A/g, both capacity and stability are significantly above literature data. Detailed investigations invol…
We report on the origin of the surface structural disordering in graphite anodes induced by lithium intercalation and deintercalation processes. Average Raman spectra of graphitic anodes reveal that cycling at potentials that correspond to low lithium concentrations in LixC (0 \leq x < 0.16) is responsible for most of the structural damage observed at the graphite surface. The extent of surface structural disorder in graphite is significantly reduced for the anodes that were cycled at potentials where stage-1 and stage-2 compounds (x > 0.33) are present. Electrochemical impedance spectra show …
As a new type of self-healing material, room-temperature liquid metal (LM) composed of Ga, In and Sn is a promising anode in lithium-ion batteries (LIBs). It is difficult to directly prepare an electrode slurry with pure LM. Here, the LM electrode slurry was successfully prepared by simple high-speed stirring method. The LM in the slurry was evenly distributed in the form of liquid particles (average size 100 μm) and no aggregation occurred. The initial discharge specific capacity of LM is 1148 mAh g-1, and the stable discharge specific capacity is 350 mAh g-1. Cyclic voltammetry measurements …
The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which associates with chemical corrosion of Li metal in liquid electrolytes, has not been quantitatively understood. Here, by combing the Titration Gas Chromatography (TGC) method and Cryogenic Focused Ion Beam (Cryo-FIB), we established a quantitative relationship between the chemical corrosion rate and electrochemically deposited Li morphology in various liquid elec…
Here we report fabrication of flexible and stretchable battery composed of strain free LiFePO4 cathode, Li4Ti5O10 anode and a solid poly ethylene oxide (PEO) electrolyte as a separator layer. The battery is developed in a view of smart textile applications. Featuring solid thermoplastic electrolyte as a key enabling element this battery is potentially extrudable or drawable into fibers or thin stripes which are directly compatible with the weaving process used in smart textile fabrication. The paper first details the choice of materials, fabrication and characterisation of electrodes and a sep…
Existence of van der Waals gaps renders two-dimensional (2D) materials ideal passages of lithium for being used as anode materials. However, the requirement of good conductivity significantly limits the choice of 2D candidates. So far only graphite is satisfying due to its relatively high conductivity. Recently, a new polymorph of layered germanium selenide (Gamma-GeSe) was proven to be semimetal in its bulk phase with a higher conductivity than graphite while its monolayer behaves semiconducting. In this work, by using first-principles calculations, we examined the possibility of using this n…
Cycling efficiency and rate capability of porous copper-coated, amorphous silicon thin-film negative electrodes are compared to equivalent silicon thin-film electrodes in lithium-ion batteries. The presence of a copper layer coated on the active material plays a beneficial role in increasing the cycling efficiency and the rate capability of silicon thin-film electrodes. Between 3C and C/8 discharge rates, the available cell energy decreased by 8% and 18% for 40 nm copper-coated silicon and equivalent silicon thin-film electrodes, respectively. Copper-coated silicon thin-film electrodes also sh…
Silicon is one of the most promising anode materials for Lithium-ion batteries. Silicon endures volume changes upon cycling, which leads to subsequent pulverization and capacity fading. These drawbacks lead to a poor lifespan and hamper the commercialization of silicon anodes. In this work, a hybrid nanostructured anode based on silicon nanoparticles (SiNPs) anchored on vertically aligned carbon nanotubes (VACNTs) with defined spacing to accommodate volumetric changes is synthesized on commercial macroscopic current collector. Achieving electrodes with good stability and excellent electrochemi…
Conditional spinodal decomposition in Li-Mg anodes for lithium metal batteries
Max Planck Institute for Sustainable Materials（马克斯·普朗克可持续材料研究所）；Aeronautics Institute of Technology（航空技术学院）；Université de Picardie Jules Verne（亚眠儒勒·凡尔纳大学）；University Grenoble Alpes, CNRS, Grenoble INP, SIMAP（格勒诺布尔阿尔卑斯大学，法国国家科学研究中心，格勒诺布尔理工学院，SIMAP）；Thermo-Calc Software AB（Thermo-Calc软件有限公司）；Federal University of São Carlos（圣卡洛斯联邦大学）；Korea University（高丽大学）；Univ Rouen Normandie, CNRS, INSA Rouen Normandie, Groupe de Physique des Matériaux, UMR 6634（鲁昂诺曼底大学，法国国家科学研究中心，鲁昂诺曼底国立应用科学学院，材料物理研究组）
Spatially-resolved neutron powder diffraction with gauge volume 2x2x20 mm3 has been applied to probe the lithium concentration in the graphite anode of different Li-ion cells of 18650-type in situ in charged state. Structural studies performed in combination with electrochemical measurements and X-ray computed tomography under real cell operating conditions unambiguously revealed non-homogeneity of lithium distribution in the graphite anode. Deviations from a homogeneous behaviour have been found in both radial and axial directions of 18650-type cells and were discussed in the frame of cell ge…
Fluoroethylene carbonate (FEC) shows promise as an electrolyte additive for improving passivating solid-electrolyte interphase (SEI) films on silicon anodes used in lithium ion batteries (LIB). We apply density functional theory (DFT), ab initio molecular dynamics (AIMD), and quantum chemistry techniques to examine excess-electron-induced FEC molecular decomposition mechanisms that lead to FEC-modified SEI. We consider one- and two-electron reactions using cluster models and explicit interfaces between liquid electrolyte and model Li(x)Si(y) surfaces, respectively. FEC is found to exhibit more…
Using first principles structure searching with density-functional theory (DFT) we identify a novel $Fm\bar{3}m$ phase of Cu$_2$P and two low-lying metastable structures, an $I\bar{4}3d$--Cu$_3$P phase, and a $Cm$--Cu$_3$P$_{11}$ phase. The computed pair distribution function of the novel $Cm$--Cu$_3$P$_{11}$ phase shows its structural similarity to the experimentally identified $Cm$--Cu$_2$P$_7$ phase. The relative stability of all Cu--P phases at finite temperatures is determined by calculating the Gibbs free energy using vibrational effects from phonon modes at 0 K. From this, a finite-temp…
We have studied hydrogen/lithium complexes in crystalline silicon using density-functional-theory methods and the ab initio random structure searching (AIRSS) method for predicting structures. A method based on the Maxwell construction and convex hull diagrams is introduced which gives a graphical representation of the relative stabilities of point defects in a crystal and enables visualization of the changes in stability when the chemical potentials are altered. We have used this approach to study lithium and hydrogen impurities in silicon, which models aspects of the anode material in the re…
In view of the long-standing controversy over the reversibility of transition metals in Sn-based alloys as anode for Li-ion batteries, an in situ real-time magnetic monitoring method was used to investigate the evolution of Sn-Co intermetallic during the electrochemical cycling. Sn-Co alloy film anodes with different compositions were prepared via magnetron sputtering without using binders and conductive additives. The magnetic responses showed that the Co particles liberated by Li insertion recombine fully with Sn during the delithiation to reform Sn-Co intermetallic into stannum richer phase…
Battery interfaces help govern rate capability, safety/stability, cycle life, and self-discharge, but significant gaps remain in our understanding at atomic length scales that can be exploited to improve interfacial properties. In particular, Li partially plated on copper current collectors, relevant to the anodeless, lithium metal cell which is a holy grail of high density energy battery research, has recently been reported to undergo galvanic corrosion and exhibit short shelf lives. We apply large scale Density Functional Theory (DFT) calculations and X-ray photoelectron spectroscopy to exam…
