Graphene nanoribbons (GNRs) are a novel and intriguing class of materials in the field of nanoelectronics, since their properties, solely defined by their width and edge type, are controllable with high precision directly from synthesis. Here we study the correlation between the GNR structure and the corresponding device electrical properties. We investigated a series of field effect devices consisting of a film of armchair GNRs with different structures (namely width and/or length) as the transistor channel, contacted with narrowly spaced graphene sheets as the source-drain electrodes. By analyzing several tens of junctions for each individual GNR type, we observe that the values of the output current display a width-dependent behavior, indicating electronic bandgaps in good agreement with the predicted theoretical values. These results provide insights into the link between the ribbon structure and the device properties, which are fundamental for the development of GNR-based electronics.
High-quality BN-Graphene-BN nanoribbon capacitors with double side-gates of graphene are experimentally realized. Graphene electronic properties can be significantly modulated by the double side-gates. The modulation effects are very obvious and followed the metallic electrode behavior of numerical simulations, while the theoretically predicted negative quantum capacitance was not observed, possibility due to the over-estimated or weakened interactions between the graphene nanoribbon and side-gate electrodes.
It is shown that apart from well-known factors, like temperature, substrate, and edge reconstruction effects, also the presence of external contacts is destructive for the formation of magnetic moments at the edges of graphene nanoribbons. The edge magnetism gradually decreases when graphene/electrode interfaces become more and more transparent for electrons. In addition to the graphene/electrode coupling strength, also the aspect ratio parameter, i.e. a width/length ratio of the graphene nanoribbon, is crucial for the suppression of edge magnetism. The present theory uses a tight-binding meth…
The magnetic and spin transport properties of a carbon chain between two armchair graphene nanoribbon (AGNR) electrodes were studied using tight-binding Hamiltonian, mean-field Hubbard model and Landauer-Butikker formalism. The results showed that only odd-numbered carbon chains show intrinsic magnetic moments in chain-graphene junctions. It was also found that the electronic, magnetic and spin transport properties of carbon chain-graphene junctions strongly depend on the position and the length of the carbon chains between AGNR electrodes. Interestingly, we found a fully spin-polarized transm…
Atomically precise graphene nanoribbons are a promising emerging class of designer quantum materials with electronic properties that are tunable by chemical design. However, many challenges remain in the device integration of these materials, especially regarding contacting strategies. We report on the device integration of uniaxially aligned and non-aligned 9-atom wide armchair graphene nanoribbons (9-AGNRs) in a field-effect transistor geometry using electron beam lithography-defined graphene electrodes. This approach yields controlled electrode geometries and enables higher fabrication thro…
In this study, based on the self-energy method and the total energy calculation, the indirect exchange coupling between two semi-infinite ferromagnetic strips (FM electrodes) separated by metallic graphene nanoribbons (GNRs) is investigated. In order to form a FM/GNR/FM junction, a graphitic region of finite length is coupled to the FM electrodes along graphitic zigzag or armchair interfaces of width $N$. The numerical results show that, the exchange coupling strength which can be obtained from the difference between the total energies of electrons in the ferromagnetic and antiferromagnetic co…
We study all-carbon-hydrogen molecular transistors where zigzag graphene nanoribbons play the role of three metallic electrodes connected to a ring-shaped 18-annulene molecule. Using the nonequilibrium Green function formalism combined with density functional theory, recently extended to multiterminal devices, we show that the proposed nanostructures exhibit exponentially small transmission when the source and drain electrodes are attached in a configuration that ensures destructive interference of electron paths around the ring. The third electrode, functioning either as an attached infinite-…
Thermoelectric properties of finite graphene nanoribbons (GNRs) coupled to metallic electrodes are theoretically studied in the framework of tight-binding model and Green's function approach. When the zigzag sides are coupled to the electrodes, the electron transport through the localized edge states can occur only if the channel length between electrodes is smaller than the decay length of these localized zigzag edge states. When the armchair edges are coupled to the electrodes, there is an interesting thermoelectric behavior associated with the mid-gap states when the GNR is in the semicondu…
Based on first-principles approaches, we study the ballistic phonon transport properties of finite monatomic carbon chains stretched between graphene nanoribbons, an $sp$-$sp^2$ hybrid carbon nanostructure that has recently seen significant experimental advances in its synthesis. We find that the lattice thermal conductance anomalously increases with tensile strain for the even-numbered carbon chains that adopt the alternating bond-length polyyne configuration. On the other hand, in the odd-numbered carbon chain cases, which assume the equal bond-length cumulene configuration, phonon conductan…
Bottom-up synthesized graphene nanoribbons (GNRs) are quantum materials that can be structured with atomic precision, providing unprecedented control over their physical properties. Accessing the intrinsic functionality of GNRs for quantum technology applications requires the manipulation of single charges, spins, or photons at the level of an individual GNR. However, experimentally, contacting individual GNRs remains challenging due to their nanometer-sized width and length as well as their high density on the metallic growth substrate. Here, we demonstrate the contacting and electrical chara…
We studied the effect of low energy (30 keV) ionic implantation of Ga+ in the direction parallel to the graphene planes (perpendicular to c-axis) in oriented graphite ribbons with widths around 500 nm. Our experiments have reproducibly shown a reduction of electrical resistance upon implan- tation consistent with the occurrence of ionic channeling in our devices. Our results allow for new approaches in the modulation of the charge carrier concentration in mesoscopic graphite.
We investigate the transport properties of double-gated bilayer graphene nanoribbons at room temperature. The devices were fabricated using conventional CMOS-compatible processes. By analyzing the dependence of the resistance at the charge neutrality point as a function of the electric field applied perpendicular to the graphene surface, we show that a band gap in the density of states opens, reaching an effective value of ~sim50 meV. This demonstrates the potential of bilayer graphene as FET channel material in a conventional CMOS environment.
In this work we numerically calculate the electric current through three kinds of DNA sequences (telomeric, λ-DNA, and p53-DNA) described by different heuristic models. A bias voltage is applied between two zig-zag edged graphene contacts attached to the DNA segments, while a gate terminal modulates the conductance of the molecule. The calculation of current is performed by integrating the transmission function (calculated using the lattice Green's function) over the range of energies allowed by the chemical potentials. We show that a telomeric DNA sequence, when treated as a quantum wire in t…
We overview nonequilibrium Green function combined with density functional theory (NEGF-DFT) modeling of independent electron and phonon transport in nanojunctions with applications focused on a new class of thermoelectric devices where a single molecule is attached to two metallic zigzag graphene nanoribbons (ZGNRs) via highly transparent contacts. Such contacts make possible injection of evanescent wavefunctions from ZGNRs, so that their overlap within the molecular region generates a peak in the electronic transmission. Additionally, the spatial symmetry properties of the transverse propaga…
The use of Floquet theory combined with a realistic description of the electronic structure of illuminated graphene and graphene nanoribbons is developed to assess the emergence of non-adiabatic and non-perturbative effects on the electronic properties. Here, we introduce an efficient computational scheme and illustrate its use by applying it to graphene nanoribbons in the presence of both linear and circular polarization. The interplay between confinement due to the finite sample size and laser-induced transitions is shown to lead to sharp features on the average conductance and density of st…
We theoretically study the electrical, thermal and thermoelectric transport properties of graphene nanoribbons under torsional deformations. The modelling follows a nonequilibrium Green's function approach in the ballistic transport regime, describing the electrical and phononic properties through \textit{ab-initio} density functional theory and empirical interatomic potentials, respectively. We consider two different types of deformations, a continuous twist of a given angle applied to the nanoribbon, and two consecutive twists applied in opposite angular directions. The numerical results are…
The size-dependent electrical resistivity of single-layer graphene ribbons has been studied experimentally for ribbon widths from 16 nm to 320 nm. The experimental findings are that the resistivity follows a more dramatic trend than that seen for metallic nanowires of similar dimensions, due to a combination of surface scattering from the edges, band-gap related effects and shifts in the Fermi level due to edge effects. We show that the Charge Neutrality point switches polarity below a ribbon width of around 50 nm, and that at this point, the thermal coefficient of resistance is a maximum. The…
Graphene nanoribbons are widely regarded as promising building blocks for next-generation carbon-based devices. A critical issue to their prospective applications is whether and to what degree their electronic structure can be externally controlled. Here, we combine simple model Hamiltonians with extensive first-principles calculations to investigate the response of armchair graphene nanoribbons to transverse electric fields. Such fields can be achieved either upon laterally gating the nanoribbon or incorporating ambipolar chemical co-dopants along the edges. We reveal that the field induces a…
We investigate the thermoelectric performance of armchair graphene nanoribbon (AGNR), bilayer GNRs junction (BGNRJ) and BGNRJ with holes (BGNRJ-H) by the first principles calculation with non-equilibrium Green function. It is found that the BGNRJ-H exhibits high ZT values of 9.65 and 5.55 at 300K. The reason of these significantly larger ZT values than previously observed has been calculated due to reduced thermal conductivity and enhanced electrical conductivity. The low thermal conductance comes from the van der waals (vdW) interaction between two graphene layers. The increased electrical co…
The high field transport characteristics of nanostructured transistors based on layered materials are not only important from a device physics perspective but also for possible applications in next generation electronics. With the growing promise of layered materials as replacements to conventional silicon technology, we study here the high current density properties of the layered material titanium trisulfide (TiS3). We observe high breakdown current densities up to 1.7 10^6 A/cm^2 in TiS3 nanoribbon-based field-effect transistors which are among the highest found in semiconducting nanomateri…
We propose a water-immersed nucleobase-functionalized suspended graphene nanoribbon as an intrinsically selective device for nucleotide detection. The proposed sensing method combines Watson-Crick selective base pairing with graphene's capacity for converting anisotropic lattice strain to changes in an electrical current at the nanoscale. Using detailed atomistic molecular dynamics simulations, we study sensor operation at ambient conditions. We combine simulated data with theoretical arguments to estimate the levels of measurable electrical signal variation in response to strains and determin…
A simple one-stage solution-based method was developed to produce graphene nanoribbons by sonicating graphite powder in organic solutions with polymer surfactant. The graphene nanoribbons were deposited on silicon substrate, and characterized by Raman spectroscopy and atomic force microscopy. Single-layer and few-layer graphene nanoribbons with a width ranging from sub-10 nm to tens of nm and length ranging from hundreds of nm to 1 μm were routinely observed. Electrical transport properties of individual graphene nanoribbons were measured in both the back-gate and polymer-electrolyte top-gate …
The effects of tensile strain on the current-voltage (I-V) characteristics of hydrogenated-edge armchair graphene nanoribbons (HAGNRs) are investigated by using DFT theory. The strain is introduced in two different ways related to the two types of systems studied in this work: in-plane strained systems (A), and out-of-plane strained systems due to bending (B). These two kinds of strain lead to make a distinction among three cases: in-plane strained systems with strained electrodes (A1) and with unstrained electrodes (A2), and out-of-plane homogeneously strained systems with unstrained, fixed e…
We present numerical simulations of the capacitive coupling between graphene nanoribbons of various widths and gate electrodes in different configurations. We compare the influence of lateral metallic or graphene side gate structures on the overall back gate capacitive coupling. Most interestingly, we find a complex interplay between quantum capacitance effects in the graphene nanoribbon and the lateral graphene side gates, giving rise to an unconventional negative quantum capacitance. The emerging non-linear capacitive couplings are investigated in detail. The experimentally relevant relative…
With nonequilibrium Green's function approach combined with density functional theory, we perform an ab initio calculation to investigate transport properties of graphene nanoribbon junctions self-consistently. Tight-binding approximation is applied to model the zigzag graphene nanoribbon (ZGNR) electrodes, and its validity is confirmed by comparison with GAUSSIAN03 PBC calculation of the same system. The origin of abnormal jump points usually appearing in the transmission spectrum is explained with the detailed tight-binding ZGNR band structure. Transport property of an edge defect ZGNR junct…
The coherent spin-polarized electron transport through a zigzag-edge graphene flake (ZGF), sandwiched between two semi-infinite armchair graphene nanoribbons, is investigated by means of Landauer-Buttiker formalism. To study the edge magnetism of the ZGF, we use the half-filled Hubbard model within the Hartree-Fock approximation. The results show that the junction acts as a spin filter with high degree of spin polarization in the absence of magnetic electrodes and external fields. By applying a gate voltage the spin-filtering efficiency of this device can be effectively controlled and the spin…
Edge states in narrow quasi two-dimensional nanostructures determine, to a large extent, their electric, thermoelectric and magnetic properties. Non-magnetic edge states may quite often lead to topological insulator type behavior. However another scenario develops when the zigzag edges are magnetic and the time reversal symmetry is broken. In this work we report on the electronic band structure modifications, electrical conductance and thermoelectric properties of narrow zigzag nanoribbons with spontaneously magnetized edges. Theoretical studies based on the Kane-Mele- Hubbard tight-binding mo…
Graphene features topological edge bands that connect the pair of Dirac points through either sectors of the 1D Brillouin zone depending on edge configurations (zigzag or bearded). Because of their flat dispersion, spontaneous edge magnetisation can arise from Coulomb interaction in graphene nanoribbons, which has caught remarkable interest. We find an anomalous Bloch oscillation in such edge bands, in which the flat dispersion freezes electron motion along the field direction, while the topological connection of the bands through the bulk leads to electron oscillation in the transverse direct…
The effects of Coulomb interactions on the electronic properties of bilayer graphene nanoribbons (BGNs) covered by a gate electrode are studied theoretically. The electron density distribution and the potential profile are calculated self-consistently within the Hartree approximation. A comparison to their single-particle counterparts reveals the effects of interactions and screening. Due to the finite width of the nanoribbon in combination with electronic repulsion, the gate-induced electrons tend to accumulate along the BGN edges where the potential assumes a sharp triangular shape. This has…
Thermoelectric properties of Graphene Nanoribbons doped by magnetic impurities Fe and Co are carried out in room temperature. We report on a study of the band structure dependent properties such as electrical conductivity, charge of carriers and Seebeck coefficients. We investigate the thermoelectric properties using the Semi-classical Boltzmann method. The electronic band structure of doped nanoribbons are evaluated by using density-functional theory in which the Hubbard interaction is considered. In this work we compare the different types of the nanoribbons and their thermoelectric features…
NbSe3 exhibits remarkable anisotropy in most of its physical properties and has been a model system for studies of quasi-one-dimensional charge-density-wave (CDW) phenomena. Herein, we report the synthesis, characterization, and electrical transport of single-crystalline NbSe3 nanoribbons by a facile one-step vapour transport process involving the transport of selenium powder onto a niobium foil substrate. Our investigations aid the understanding of the CDW nature of NbSe3 and the growth process of the material. They also indicate that NbSe3 nanoribbons have enhanced CDW properties compared to…
We report the fabrication and characterization of superconducting quantum interference devices (SQUIDs) made of Sb-doped Bi2Se3 topological insulator (TI) nanoribbon (NR) contacted with PbIn superconducting electrodes. When an external magnetic field was applied along the NR axis, the TI NR exhibited periodic magneto-conductance oscillations, the so-called Aharonov-Bohm oscillations, owing to one-dimensional subbands. Below the superconducting transition temperature of PbIn electrodes, we observed supercurrent flow through TI NR-based SQUID. The critical current periodically modulates with a m…
The nonequilibrium time-dependent fluctuations of charge current have recently emerged as a sensitive experimental tool to probe ballistic transport through evanescent wave functions introduced into clean wide and short graphene strips by the attached metallic electrodes. We demonstrate that such "pseudo-diffusive" shot noise can be substantially modified in zigzag graphene nanoribbon (ZGNR) due to the topology of its edges responsible for localized states that facilitate ferromagnetic ordering along the edge when Coulomb interaction is taken into account. Thus, the shot noise enhancement of u…
We investigated the atomic structures, Raman spectroscopic and electrical transport properties of individual graphene nanoribbons (GNRs, widths ~10-30 nm) derived from sonochemical unzipping of multi-walled carbon nanotubes (MWNTs). Aberration-corrected transmission electron microscopy (TEM) revealed a high percentage of two-layer (2L) GNRs and some single layer ribbons. The layer-layer stacking angles ranged from 0o to 30o including average chiral angles near 30o (armchair orientation) or 0o (zigzag orientation). A large fraction of GNRs with bent and smooth edges was observed, while the rest…
Carbon-based nanostructures and graphene, in particular, evoke a lot of interest as new promising materials for nanoelectronics and spintronics. One of the most important issue in this context is the impact of external electrodes on electronic properties of graphene nanoribbons (GNR). The present theoretical method is based on the tight-binding model and a modified recursive procedure for Green's functions. The results show that within the ballistic transport regime, the so called end-contacted geometry (of minimal GNR/electrode interface area), is usually more advantageous for practical appli…
We report on the fabrication and electrical transport properties of superconducting quantum interference devices (SQUIDs) made from a (Bi_{1-x}Sb_x)_2Se_3 topological insulator (TI) nanoribbon (NR) connected with Pb0.5In0.5 superconducting electrodes. Below the transition temperature of the superconducting Pb0.5In0.5 electrodes, periodic oscillations of the critical current are observed in the TI NR SQUID under a magnetic field applied perpendicular to the plane owing to flux quantization. Also the output voltage modulates as a function of the external magnetic field. Moreover, the SQUID the S…
We investigate electronic transport in lithographically patterned graphene ribbon structures where the lateral confinement of charge carriers creates an energy gap near the charge neutrality point. Individual graphene layers are contacted with metal electrodes and patterned into ribbons of varying widths and different crystallographic orientations. The temperature dependent conductance measurements show larger energy gaps opening for narrower ribbons. The sizes of these energy gaps are investigated by measuring the conductance in the non-linear response regime at low temperatures. We find that…
Phase change memory (PCM) devices are known to reduce in power consumption as the bit volume and contact area of their electrodes are scaled down. Here, we demonstrate two types of low-power PCM devices with lateral graphene ribbon electrodes: one in which the graphene is patterned into narrow nanoribbons and the other where the phase change material is patterned into nanoribbons. The sharp graphene "edge" contacts enable switching with threshold voltages as low as ~3 V, low programming currents (<1 μA SET, <10 μA RESET) and ON/OFF ratios >100. Large-scale fabrication with graphene grown by ch…
We have elaborately studied the electronic structure of 555-777 divacancy (DV) defected armchair edged graphene nanoribbon (AGNR) and transport properties of AGNR based two-terminal device constructed with one defected electrode and one N doped electrode, by using density functional theory and non-equilibrium Green's function based approach. The introduction of 555-777 DV defect into AGNRs, results in a shifting of the π and π* bands towards the higher energy value which indicates a shifting of the Fermi level towards the lower energy. Formation of a potential barrier, very similar to that of …
Coherent spin-dependent transport through a junction containing of Normal/Ferromagnetic/Normal bilayer graphene nanoribbon with zigzag edges is investigated by using Landauer formalism. In a more realistic set-up, the exchange field is induced by two ferromagnetic insulator strips deposited on the ribbon edges while a perpendicular electric field is applied by the top gated electrodes. Our results show that, for antiparallel configuration, a band gap is opened giving rise a semiconducting behavior, while for parallel configuration, the band structure has no band gap. As a result, a giant magne…
We report on the experimental demonstration and electrical characterization of N = 7 armchair graphene nanoribbon (7-AGNR) field effect transistors. The back-gated transistors are fabricated from atomically precise and highly aligned 7-AGNRs, synthesized with a bottom-up approach. The large area transfer process holds the promise of scalable device fabrication with atomically precise nanoribbons. The channels of the FETs are approximately 30 times longer than the average nanoribbon length of 30 nm to 40 nm. The density of the GNRs is high, so that transport can be assumed well-above the percol…
We report on the fabrication and transport characterization of atomically-precise single molecule devices consisting of a magnetic porphyrin covalently wired by graphene nanoribbon electrodes. The tip of a scanning tunneling microscope was utilized to contact the end of a GNR-porphyrin-GNR hybrid system and create a molecular bridge between tip and sample for transport measurements. Electrons tunneling through the suspended molecular heterostructure excited the spin multiplet of the magnetic porphyrin. The detachment of certain spin-centers from the surface shifted their spin-carrying orbitals…
We study the low energy spin excitations of zigzag graphene nanoribbons of varying width. We find their energy dispersion at small wave vector to be dominated by antiferromagnetic correlations between the ribbon's edges, in accrodance with previous calculations. We point out that spin wave lifetimes are very long due to the semi-conducting nature of the electrically neutral nanoribbons. However, application of very modest gate voltages cause a discontinuous transition to a regime of finite spin wave lifetime. By further increasing doping the ferromagnetic alignments along the edge become unsta…
We study thermoelectric devices where a single 18-annulene molecule is connected to metallic zigzag graphene nanoribbons (ZGNR) via highly transparent contacts that allow for injection of evanescent wave functions from ZGNRs into the molecular ring. Their overlap generates a peak in the electronic transmission, while ZGNRs additionally suppress hole-like contributions to the thermopower. Thus optimized thermopower, together with suppression of phonon transport through ZGNR-molecule-ZGNR structure, yield the thermoelectric figure of merit ZT ~ 0.5 at room temperature and 0.5 < ZT < 2.5 below li…
We report on the fabrication and electrical characterization of both single layer graphene micron-sized devices and nanoribbons on a hexagonal boron nitride substrate. We show that the micron-sized devices have significantly higher mobility and lower disorder density compared to devices fabricated on silicon dioxide substrate in agreement with previous findings. The transport characteristics of the reactive-ion-etched graphene nanoribbons on hexagonal boron nitride, however, appear to be very similar to those of ribbons on a silicon dioxide substrate. We perform a detailed study in order to hi…
We report on the fabrication and characterization of synthesized multiwall MoS2 nanotube (NT) and nanoribbon (NR) field-effect transistors (FETs). The MoS2 NTs and NRs were grown by chemical transport, using iodine as a transport agent. Raman spectroscopy confirms the material as unambiguously MoS2 in NT, NR, and flake forms. Transmission electron microscopy was used to observe cross sections of the devices after electrical measurements and these were used in the interpretation of the electrical measurements allowing estimation of the current density. The NT and NR FETs demonstrate n-type beha…
For electronic and photoelectronic devices based on GeSe, an emergent two dimensional monochalcogenide with many exciting properties predicted, good electrical contacts are of great importance for achieving high device performances and exploring the intrinsic physics of GeSe. In this article, we use temperature-dependent transport measurements and thermionic emission theory to systematic investigate the contact-barrier heights between GeSe and six common electrode metals, Al, Ag, Ti, Au, Pt and Pd. These metals cover a wide range of work functions (from ~ 3.6 eV to ~ 5.7 eV). Our study indicat…
We investigate the electron transport and thermoelectric property of twisted bilayer graphene nanoribbon junction (TBGNRJ) in $0^o$, $21.8^o$, $38.2^o$ and $60^o$ rotation angles by first principles calculation with Landauer-Buttiker and Boltzmann theories. It is found that TBGNRJs exhibit negative differential resistance (NDR) in $21.8^o$ and $38.2^o$ rotation angles under $\pm$ 0.2 V bias voltage. More importantly, three peak ZT values of 2.0, 2.7 and 6.1 can be achieved in the $21.8^o$ rotation angle at 300K. The outstanding ZT values of TBGNRJs are interpreted as the combination of the red…
We present an atomistic 3D simulation study of the performance of graphene nanoribbon (GNR) Schottky barrier (SB) FETs and transistors with doped reservoirs (MOSFETs) by means of the self-consistent solution of the Poisson and Schrodinger equations within the non-equilibrium Green's function (NEGF) formalism. Ideal MOSFETs show slightly better electrical performance, for both digital and THz applications. The impact of non-idealities on device performance has been investigated, taking into account the presence of single vacancy, edge roughness and ionized impurities along the channel. In gener…
Transport and thermoelectric properties of finite textured graphene nanoribbons (t-GNRs) connected to electrodes with various coupling strengths are theoretically studied in the framework of the tight-binding model and Green's function approach. Due to quantum constriction induced by the indented edges, such t-GNRs behave like serially-coupled graphene quantum dots (SGQDs). These types of SGQDs can be formed by tailoring zigzag GNRs (ZGNRs) or armchair GNRs (AGNRs). Their bandwidths and gaps can be engineered by varying the size of the quantum dot and the neck width at indented edges. Effects …
We employ a semi-classical Langevin approach to study current-induced atomic dynamics in a partially dehydrogenated armchair graphene nanoribbon. All parameters are obtained from density functional theory. The dehydrogenated carbon dimers behave as effective impurities, whose motion decouples from the rest of carbon atoms. The electrical current can couple the dimer motion in a coherent fashion. The coupling, which is mediated by nonconservative and pseudo-magnetic current-induced forces, change the atomic dynamics, and thereby show their signature in this simple system. We study the atomic dy…
The integrated inplane growth of two dimensional materials with similar lattices, but distinct electrical properties, could provide a promising route to achieve integrated circuitry of atomic thickness. However, fabrication of edge specific GNR in the lattice of hBN still remains an enormous challenge for present approaches. Here we developed a two step growth method and successfully achieved sub 5 nm wide zigzag and armchair GNRs embedded in hBN, respectively. Further transport measurements reveal that the sub 7 nm wide zigzag GNRs exhibit openings of the band gap inversely proportional to th…
