We present an atomistic 3D simulation study of the performance of graphene nanoribbon (GNR) Schottky barrier (SB) FETs and transistors with doped reservoirs (MOSFETs) by means of the self-consistent solution of the Poisson and Schrodinger equations within the non-equilibrium Green's function (NEGF) formalism. Ideal MOSFETs show slightly better electrical performance, for both digital and THz applications. The impact of non-idealities on device performance has been investigated, taking into account the presence of single vacancy, edge roughness and ionized impurities along the channel. In general, MOSFETs show more robust characteristics than SBFETs. Edge roughness and single vacancy defect largely affect performance of both device types.
We present an atomistic three-dimensional simulation of graphene nanoribbon field effect transistors (GNR-FETs), based on the self-consistent solution of the 3D Poisson and Schroedinger equation with open boundary conditions within the non-equilibrium Green's Function formalism and a tight-binding hamiltonian. With respect to carbon nanotube FETs, GNR-FETs exhibit comparable performance, reduced sensitivity on the variability of channel chirality, and similar leakage problems due to band-to-band tunneling. Acceptable transistor performance requires effective nanoribbon width of 1-2 nm, that co…
In this article, a novel two-path model is proposed to quantitatively explain sub-threshold characteristics of back-gated Schottky barrier FETs (SB-FETs) from 2D channel materials. The model integrates the 'conventional' model for SB-FETs with the phenomenon of contact gating - an effect that significantly affects the carrier injection from the source electrode in back-gated field effect transistors. The two-path model is validated by a careful comparison with experimental characteristics obtained from a large number of back-gated WSe2 devices with various channel thicknesses. Our findings are…
In graphene nanoribbons (GNRs), the lateral confinement of charge carriers opens a band gap, the key feature to enable novel graphene-based electronics. Successful synthesis of GNRs has triggered efforts to realize field-effect transistors (FETs) based on single ribbons. Despite great progress, reliable and reproducible fabrication of single-ribbon FETs is still a challenge that impedes applications and the understanding of the charge transport. Here, we present reproducible fabrication of armchair GNR-FETs based on a network of nanoribbons and analyze the charge transport mechanism using nine…
Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show drain-current modulation of approximately 10 at 300 K, increasing to nearly 106 at 4 K. The strong temperature dependence of the minimum current indicates the opening of a bandgap for CVD-grown GNR-FETs. The extracted bandgap is estimated to be around 0.1 eV by differential conductance methods. This work highlights the development of CVD-grown large-area graphene …
Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as ~2000uA/um. We estimated carrier mobility ~200cm2/Vs and scattering mean free path ~10nm in sub-10nm GNRs. Scattering mechanisms by edges, acoustic phonon and defects are discussed. The sub-10nm GNRFETs are comparable to small diameter (d<=~1.2nm) carbon nanotube FETs with Pd contacts in on-state current density and Ion/Ioff ratio, but have the advantage of produc…
A general solution for the electrostatic potential in an atomic-thin-body (ATB) field-effect transistor geometry is presented. The effective electrostatic scaling length, λeff, is extracted from the analytical model, which cannot be approximated by the lowest order eigenmode as traditionally done in SOI-MOSFETs. An empirical equation for the scaling length that depends on the geometry parameters is proposed. It is shown that even for a thick SiO2 back oxide λeff can be improved efficiently by thinner top oxide thickness, and to some extent, with high-k dielectrics. The model is then applied to…
We report on the fabrication and characterization of synthesized multiwall MoS2 nanotube (NT) and nanoribbon (NR) field-effect transistors (FETs). The MoS2 NTs and NRs were grown by chemical transport, using iodine as a transport agent. Raman spectroscopy confirms the material as unambiguously MoS2 in NT, NR, and flake forms. Transmission electron microscopy was used to observe cross sections of the devices after electrical measurements and these were used in the interpretation of the electrical measurements allowing estimation of the current density. The NT and NR FETs demonstrate n-type beha…
Effects of phonon confinement on electron transport in Si nanowire and armchair-edge graphene nanoribbon transistors: A dissipative quantum-transport study
The scaling behaviors of graphene nanoribbon (GNR) Schottky barrier field-effect transistors (SBFETs) are studied by solving the non-equilibrium Green's function (NEGF) transport equation in an atomistic basis set self-consistently with a three-dimensional Poisson equation. The armchair edge GNR channel shares similarities with a zigzag CNT, but it has a different geometry and quantum confinement boundary condition in the transverse direction. The results indicate that the I-V characteristics are ambipolar and strongly depend on the GNR width because the bandgap of the GNR is approximately inv…
An analogue of the Datta-Das spin FET is investigated, which is all-graphene and based on the valley degree of freedom of electrons / holes. The "valley FET" envisioned consists of a quantum wire of gapped graphene (channel) sandwiched between two armchair graphene nanoribbons (source and drain), with the following correspondence to the spin FET: valley (K and K') \leftrightarrow spin (up and down), armchair graphene nanoribbons \leftrightarrow ferromagnetic electrodes, graphene quantum wire \leftrightarrow semiconductor quantum wire, valley-orbit interaction \leftrightarrow Rashba spin-orbit …
Dirac-source field-effect transistors (DS-FETs) have been proposed as promising candidates for low-power switching devices by leveraging the Dirac cone of graphene as a low-pass energy filter. In particular, using two-dimensional (2D) materials as the channel in a DS-FET is of interest for ultimate scaling purposes. In this paper, we investigate the design considerations for 2D DS-FETs using ballistic simulations based on Landauer formalism. We study the impact of several key device parameters on the device performance, such as graphene doping, Schottky barrier heights, and effective mass of t…
Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap of these GNRs have prevented the fabrication of devices with the desired performance and switching behaviour. Here, by fabricating short channel (Lch ~20 nm) devices with a thin, high-k gate dielectric and a 9-atom wide (0.95 nm) armchair GNR as the channel material, we demonstrate FETs with high on-current (Ion >1 uA at Vd = -1 V) and high Ion/Ioff ~10^5 at …
We report on the experimental demonstration and electrical characterization of N = 7 armchair graphene nanoribbon (7-AGNR) field effect transistors. The back-gated transistors are fabricated from atomically precise and highly aligned 7-AGNRs, synthesized with a bottom-up approach. The large area transfer process holds the promise of scalable device fabrication with atomically precise nanoribbons. The channels of the FETs are approximately 30 times longer than the average nanoribbon length of 30 nm to 40 nm. The density of the GNRs is high, so that transport can be assumed well-above the percol…
In this work, we demonstrate atomic-layer-deposited (ALD) single-channel indium oxide (In2O3) gate-all-around (GAA) nanoribbon FETs in a back-end-of-line (BEOL) compatible process. A maximum on-state current (ION) of 19.3 mA/μm (near 20 mA/μm) is achieved in an In2O3 GAA nanoribbon FET with a channel thickness (TIO) of 3.1 nm, channel length (Lch) of 40 nm, channel width (Wch) of 30 nm and dielectric HfO2 of 5 nm. The record high drain current obtained from an In2O3 FET is about one order of magnitude higher than any conventional single-channel semiconductor FETs. This extraordinary drain curr…
This paper reviews the current status of graphene transistors as potential supplement to silicon CMOS technology. A short overview of graphene manufacturing and metrology methods is followed by an introduction of macroscopic graphene field effect transistors (FETs). The absence of an energy band gap is shown to result in severe shortcomings for logic applications. Possibilities to engineer a band gap in graphene FETs including quantum confinement in graphene Nanoribbons (GNRs) and electrically or substrate induced asymmetry in double and multi layer graphene are discussed. Graphene FETs are sh…
To explore the potential of field-effect transistors (FETs) based on monolayers of the two-dimensional semiconducting channel(SC) for spintronics, the two most important issues are to ensure the formation of variable low resistive tunnel ferromagnetic contacts(FC), and to preserve intrinsic properties of the SC during fabrication. Large Schottky barriers lead to the formation of high resistive contacts and methods adopted to control the barriers often alter the intrinsic properties of the SC. This work aims at addressing both issues in fully encapsulated monolayer WSe$_2$ FETs by using bi-laye…
The potential barrier height at the interface formed by a metal contact and multiple one-dimensional (1D) quasi-ballistic channels in field-effect transistors (FETs) is evaluated across different carbon nanotube and nanowire device technologies by means of a Landauer-Büttiker-based extraction methodology (LBM) adapted for multiple 1D-channels. The extraction methodology yields values for an effective Schottky barrier height and a gate coupling coefficient, an indicator of the device working at the quantum capacitance limit. The novel LBM-based approach embracing the mechanisms in 1D electronic…
Chemically synthesized "cove"-type graphene nanoribbons (cGNRs) of different widths were brought into dispersion and drop-cast onto exfoliated hexagonal boron nitride (hBN) on a Si/SiO2 chip. With AFM we observed that the cGNRs form ordered domains aligned along the crystallographic axes of the hBN. Using electron beam lithography and metallization, we contacted the cGNRs with NiCr/Au, or Pd contacts and measured their I-V-characteristics. The transport through the ribbons was dominated by the Schottky behavior of the contacts between the metal and the ribbon.
High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to chemically intrinsic SWNTs, with no or small Schottky barriers (SB), afford high ON-state currents up to 20 uA per tube. The lack of significant Fermi-level pinning at the nanotube-metal interfaces allows for fine-tuning of the barrier heights for p-and n-channel conductions by changing the contact metals. The air-stable p- and n-FETs thus obtained can be used …
Two-dimensional material-based field effect transistors (2DM-FETs) are playing a revolutionary role in electronic devices. However, after years of development, no device model can match the Pao-Sah model for standard silicon-based transistors in terms of physical accuracy and computational efficiency to support large-scale integrated circuit design. One remaining critical obstacle is the contacts of 2DM-FETs. In order to self-consistently include the contact effect in the current model, it is necessary to perform self-consistent calculations, which is a fatal flaw for applications that priorit…
Schottky Barrier (SB)-MOSFET technology offers intriguing possibilities for cryogenic nano-scale devices, such as Si quantum devices and superconducting devices. We present experimental results on a novel device architecture where the gate electrode is self-aligned with the device channel and overlaps the source and drain electrodes. This facilitates a sub-5 nm gap between the source/drain and channel, and no spacers are required. At cryogenic temperatures, such devices function as p-MOS Tunnel FETs, as determined by the Schottky barrier at the Al-Si interface, and as a further advantage, fabr…
Nanotransistors typically operate in far-from-equilibrium (FFE) conditions, that cannot be described neither by drift-diffusion, nor by purely ballistic models. In carbonbased nanotransistors, source and drain contacts are often characterized by the formation of Schottky Barriers (SBs), with strong influence on transport. Here we present a model for onedimensional field-effect transistors (FETs), taking into account on equal footing both SB contacts and FFE transport regime. Intermediate transport is introduced within the Buttiker probe approach to dissipative transport, in which a non-ballist…
High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped nanotube segments as source/drain electrodes. The combination of these elements affords high ON currents, subthreshold swings of ~ 70-80 mV/decade, and allows for low OFF currents and suppressed ambipolar conduction. The doped source and drain approach resembles that of MOSFETs and can impart excellent OFF states to nanotube FETs under aggressive vertical scali…
One of severe limits of graphene nanoribbons (GNRs) in future applications is that zigzag GNRs (ZGNRs) are gapless, so cannot be used in field effect transistors (FETs). In this paper, using tight-binding approach and first principles method, we derived and proved a general edge (boundary) condition for the opening of a significant bandgap in ZGNRs with defective edge structures. The proposed semiconducting GNRs have some interesting properties including the one that they can be embedded and integrated in a large piece of graphene without the need of completely cutting them out. We also demons…
Understanding of the electrical contact properties of semiconductor nanowire (NW) field effect transistors (FETs) plays a crucial role in employing semiconducting NWs as building blocks for future nanoelectronic devices and in the study of fundamental physics problems. Here, we report on a study of the contact properties of Ti/Au, a widely used contact metal combination, to individual InSb NWs via both two-probe and four-probe transport measurements. We show that a Schottky barrier of height $Φ_{\rm{SB}}\sim20\ \rm{meV}$ is present at the metal-InSb NW interfaces and its effective height is ga…
Graphene has shown impressive properties for nanoelectronics applications including a high mobility and a width-dependent bandgap. Use of graphene in nanoelectronics would most likey be in the form of graphene nanoribbons (GNRs) where the ribbon width is expected to be less than 20 nm. Many theoretical projections have been made on the impact of edge-scattering on carrier transport in GNRs - most studies point to a degradation of mobility (of GNRs) as well as the on/off ratio (of GNR FETs). This study provides the first clear experimental evidence of the onset of size-effect in patterned GNRs;…
The performance limits of the multilayer graphene nanoribbon (GNR) field-effect transistor (FET) are assessed and compared to those of monolayer GNR FET and carbon nanotube (CNT) FET. The results show that with a thin high-k gate insulator and reduced interlayer coupling, multilayer GNR FET can significantly outperform its CNT counterpart with a similar gate and bandgap in terms of the ballistic on-current. In the presence of optical phonon scattering, which has a short mean free path in the graphene-derived nanostructures, the advantage of the multilayer GNRFET is even more significant. The s…
Graphene nanoribbons (GNRs) synthesized using a bottom-up technique potentially enable future electronic devices owing to the tunable electronic structures depending on the well-defined width and edge geometry. For instance, armchair-edged GNRs (AGNRs) exhibit width-dependent bandgaps. However, the bandgaps of AGNRs synthesized experimentally thus far are relatively large, well above 1 eV. Such a large bandgap may deteriorate device performances due to large Schottky barriers and carrier effective masses. We describe the bottom-up synthesis of AGNRs with a smaller bandgap using dibromobenzene-…
Although monolayer black phosphorus (BP) or phosphorene has been successfully exfoliated and its optical properties have been explored, most of electrical performance of the devices is demonstrated on few-layer phosphorene and ultra-thin BP films. In this paper, we study the channel length scaling of ultra-thin BP field-effect transistors (FETs), and discuss a scheme for using various contact metals to change transistor characteristics. Through studying transistor behaviors with various channel lengths, the contact resistance can be extracted from the transfer length method (TLM). With differe…
We report on the fabrication and room temperature measurements of a high frequency electrical signal detector. The device is based on the ballistic transport in graphene to detect a high frequency signal. The observed response is linear in the considered power range (-40dBm - 0dBm) and exhibits a sensitivity as high as 10 Volts/Watt. Finally the device detected signals up to 50GHz with a maximum response at 10GHz. This device outperforms any previously reported carbon based detectors in frequency response and compares to current state of the art Schottky based detectors in dynamic range.
We report an improved photosensitivity in few-layer tin disulfide (SnS2) field-effect transistors (FETs) following doping with CdSe/ZnS core/shell quantum dots (QDs). The hybrid QD-SnS2 FET devices achieve more than 500 percent increase in the photocurrent response compared with the starting SnS2-only FET device and a spectral responsivity reaching over 650 A/W at 400 nm wavelength. The negligible electrical conductance in a control QD-only FET device suggests that energy transfer between QDs and SnS2 is the main mechanism responsible for the sensitization effect, which is consistent with the …
We discuss the valley-orbit interaction (VOI) and the concept of VOI based valleytronics. Potential of such valleytronics is illustrated, with graphene as an example material, in several frontier applications comprising FETs, quantum computing, and quantum communications. Two important devices are discussed as examples, namely, 1) valley pair qubits in coupled graphene quantum dots, to build quantum networks consisting of graphene and photons, and 2) valleybased FETs consisting of graphene quantum wires (channels) and armchair graphene nanoribbons (sources and drains), to build graphene-based,…
In this paper, we present a mode space method for atomistic non-equilibrium Green's function simulations of armchair graphene nanoribbon FETs that includes electron-phonon scattering. With reference to both conventional and tunnel FET structures, we show that, in the ideal case of a smooth electrostatic potential, the modes can be decoupled in different groups without any loss of accuracy. Thus, inter-subband scattering due to electron-phonon interactions is properly accounted for, while the overall simulation time considerably improves with respect to real-space, with a speed-up factor of 40 …
We report the fabrication of back-gated field-effect transistors (FETs) using ultra-thin, mechanically exfoliated MoSe2 flakes. The MoSe2 FETs are n-type and possess a high gate modulation, with On/Off ratios larger than 106. The devices show asymmetric characteristics upon swapping the source and drain, a finding explained by the presence of Schottky barriers at the metal contact/MoSe2 interface. Using four-point, back-gated devices we measure the intrinsic conductivity and mobility of MoSe2 as a function of gate bias, and temperature. Samples with a room temperature mobility of ~50 cm2/V.s s…
The Y-chart is a powerful tool for understanding the relationship between various views (behavioral, structural, physical) of a system, at different levels of abstraction, from high-level, architecture and circuits, to low-level, devices and materials. We thus use the Y-chart adapted for graphene to guide the chapter and explore the relationship among the various views and levels of abstraction. We start with the innermost level, namely, the structural and chemical view. The edge chemistry of patterned graphene nanoribbons (GNR) lies intermediate between graphene and benzene, and the correspon…
Graphene nanoribbons (GNRs) are a family of one-dimensional (1D) materials carved from graphene lattice. GNRs possess high mobility and current carrying capability, sizable bandgap, and versatile electronic properties tailored by the orientations and open edge structures. These unique properties make GNRs promising candidates for prospective electronics applications including nano-sized field-effect transistors (FETs), spintronic devices, and quantum information processing. To fully exploit the potential of GNRs, fundamental understanding of structure-property relationship, precise control of …
Solution processed field-effect transistors based on single crystalline silicon nanowires (Si NWs) with metal Schottky contacts are demonstrated. The semiconducting layer was deposited from a nanowire ink formulation at room temperature. The devices with 230nm thick SiO2 gate insulating layers show excellent output current-voltage characteristics with early saturation voltages under 2 volts, constant saturation current and exceptionally low dependence of saturation voltage with the gate field. Operational principles of these devices are markedly different from traditional ohmic-contact field-e…
Layered two-dimensional (2D) semiconducting transition metal dichalcogenides (TMD) have been widely isolated, synthesized, and characterized recently. Numerous 2D materials are identified as the potential candidates as channel materials for future thin film technology due to their high mobility and the exhibiting bandgaps. While many TMD filed-effect transistors (FETs) have been widely demonstrated along with a significant progress to clearly understand the device physics, large contact resistance at metal/semiconductor interface still remain a challenge. From 2D device research point of view,…
This work deals with the electron beam irradiation of the Schottky metal contacts in monolayer molybdenum disulfide (MoS$_2$) field-effect transistors (FETs). We show that the exposure of the Ti/Au source/drain leads to an electron beam improves the transistor conductance. We simulate the path of the electrons in the device and show that most of the beam energy is absorbed in the metal contacts. Hence, we propose that the transistor current enhancement is due to thermally induced interfacial reactions that lower the contact Schottky barriers. We also show that the electron beam conditioning of…
For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 μm gate length with an on-off current ratio of 107. The enhanced electrical characteristic is confirmed in a nearly 2.1 times improvement in on-resistance and a 3.3 times improvement in contact resistance with hetero-contacts compared to the MoS2 FETs without graphene contact layer. Temperature dependent study on MoS2/graphene hetero-contacts has been also performed, still unveiling its Schottky contact nature. Transfer …
Two-dimensional polyaniline with C$_3$N stoichiometry, is a newly fabricated layered material that has been expected to possess fascinating electronic, thermal, mechanical and chemical properties. The nature of its counterpart nano-ribbons/structures offering even more tunability in property because of the unique quantum confinement and edge effect, however, has not been revealed sufficiently. Here, using the first-principles calculation based on density functional theory and nonequilibrium Green's function technique, we first perform a study on the electron band structure of armchair C$_3$N n…
In this work, we present a performance analysis of Field Effect Transistors based on recently fabricated 100% hydrogenated graphene (the so-called graphane) and theoretically predicted semi-hydrogenated graphene (i.e. graphone). The approach is based on accurate calculations of the energy bands by means of GW approximation, subsequently fitted with a three-nearest neighbor (3NN) sp3 tight-binding Hamiltonian, and finally used to compute ballistic transport in transistors based on functionalized graphene. Due to the large energy gap, the proposed devices have many of the advantages provided by …
Armchair nanotubes of MoS2 and WS2 offer a sizeable band gap, with the advantage of a one dimensional (1D) electronic material, but free from edge roughness and thermodynamic instability of nanoribbons. Use of such semiconducting MX2 (MoS2, WS2) armchair nanotubes (NTs) in conjunction with metallic carbon nanotubes (CNT) could prove useful for nanoelectronics and photonics applications. In this work atomistic simulations of MoS2 NT-CNT and WS2 NT-CNT junctions are carried out to study the physics of such junctions. With density functional theory (DFT) we study the carrier density distribution,…
Large scale graphene electronics desires lithographic patterning of narrow graphene nanoribbons (GNRs) for device integration. However, conventional lithography can only reliably pattern ~20nm wide GNR arrays limited by lithography resolution, while sub-5nm GNRs are desirable for high on/off ratio field-effect transistors (FETs) at room temperature. Here, we devised a gas phase chemical approach to etch graphene from the edges without damaging its basal plane. The reaction involved high temperature oxidation of graphene in a slightly reducing environment to afford controlled etch rate (\leq ~1…
We report density-functional theory (DFT), atomistic simulations of the non-equilibrium transport properties of carbon nanotube (CNT) field-effect transistors (FETs). Results have been obtained within a self-consistent approach based on the non-equilibrium Green's functions (NEGF) scheme. Our attention has been focused on a new kind of devices, the so called bulk-modulated CNTFETs. Recent experimental realizations \cite{Chen,Lin_condMat} have shown that such devices can exhibit excellent performances, even better than state-of-the-art Schottky barrier (SB)-modulated transistors. Our calculatio…
Investigation of a TMD-metal interface is essential for the effective functioning of monolayer TMD based field effect transistors (FETs). In this work, we employ Density Functional Theory (DFT) calculations to analyze the modulation of the electronic structure of monolayer WS2 with chlorine doping and the relative changes in the contact properties when interfaced with gold and palladium. We initially examine the atomic and electronic structures of pure and doped monolayer WS2 supercell and explore the formation of mid gap states with band splitting near the conduction band edge. Further we ana…
Two-dimensional transitional metal dichalcogenide (TMD) field-effect transistors (FETs) are promising candidates for future electronic applications, owing to their excellent transport properties and potential for ultimate device scaling. However, it is widely acknowledged that substantial contact resistance associated with the contact-TMD interface has impeded device performance to a large extent. It has been discovered that O2 plasma treatment can convert WSe2 into WO3-x and substantially improve contact resistances of p-type WSe2 devices by strong doping induced thinner depletion width. In t…
