At strong pump powers, a semiconductor optical cavity passes through a Hopf bifurcation and undergoes self-oscillation. We simulate this device using semiclassical Langevin equations and assess the effect of quantum fluctuations on the dynamics. Below threshold, the cavity acts as a phase-insensitive linear amplifier, with noise $\sim 5\times$ larger than the Caves bound. Above threshold, the limit cycle acts as an analog memory, and the phase diffusion is $\sim 10\times$ larger than the bound set by the standard quantum limit. We also simulate entrainment of this oscillator and propose an optical Ising machine and classical CNOT gate based on the effect.
This paper derives Langevin equations for an optical cavity where the dominant nonlinearity arises from free-carrier dispersion. We define a generalized Wigner function, compute a Fokker-Planck equation that approximates the master equation, and convert this to a system of stochastic differential equations. These equations are similar to the Wigner equations for an optical Kerr cavity, but have additional noise terms due to the incoherent carrier excitation and decay processes. We use these equations to simulate a phase-sensitive amplifier and latch and compare the results to a Kerr model.
We consider a large class of optical cavities and gain media with an off-axis external feedback which introduces a two-point nonlocality. This nonlocality moves the lasing threshold and opens large windows of control parameters where weak light spots can be strongly amplified while the background radiation remains very low. Furthermore, transverse phase and group velocities of a signal can be independently tuned and this enables to steer it non mechanically, to control its spatial chirping and to split it into two counter-propagating ones.
We demonstrate a simple and rapid epoxy-based method for transferring photonic crystal cavities to the facets of optical fibers. Passive Si cavities were measured via fiber taper coupling as well as direct transmission from the fiber facet. Active quantum dot containing GaAs cavities showed photoluminescence that was collected both in free space and back through the original fiber. Cavities maintain a high quality factor (2000-4000) in both material systems. This new design architecture provides a practical mechanically stable platform for the integration of photonic crystal cavities with macr…
We propose a three-mode optomechanical system to realize optical nonreciprocal transmission with unidirectional amplification, where the system consists of two coupled cavities and one mechanical resonator which interacts with only one of the cavities. Additionally, the optical gain is introduced into the optomechanical cavity. It is found that for a strong optical input, the optical transmission coefficient can be greatly amplified in a particular direction and suppressed in the opposite direction. The expressions of the optimal transmission coefficient and the corresponding isolation ratio a…
Photonic crystal cavities enable the realization of high Q-factor and low mode-volume resonators, with typical architectures consisting of a thin suspended periodically-patterned layer to maximize confinement of light by strong index guiding. We investigate a heterostructure-based approach comprising a high refractive index core and lower refractive index cladding layers. Whilst confinement typically decreases with decreasing index contrast between the core and cladding layers, we show that, counter-intuitively, due to the confinement provided by the photonic band structure in the cladding lay…
Second-order nonlinear effects, such as second-harmonic generation, can be strongly enhanced in nanofabricated photonic materials when both fundamental and harmonic frequencies are spatially and temporally confined. Practically designing low-volume and doubly resonant nanoresonators in conventional semiconductor compounds is challenging owing to their intrinsic refractive index dispersion. In this work we review a recently developed strategy to design doubly resonant nanocavities with low mode volume and large quality factor by localized defects in a photonic crystal structure. We build on thi…
We propose and analyze a family of nanoscale cavities for electrically-pumped surface-emitting semiconductor lasers that use surface plasmons to provide optical mode confinement in cavities which have dimensions in the 100-300 nm range. The proposed laser cavities are in many ways nanoscale optical versions of micropatch antennas that are commonly used at microwave/RF frequencies. Surface plasmons are not only used for mode confinement but also for output beam shaping to realize single-lobe far-field radiation patterns with narrow beam waists from subwavelength size cavities. We identify the c…
Nanoscale amplification of non-linear processes in solid-state devices opens novel applications in nano-electronics, nano-medicine or high energy conversion for example. Coupling few nano-joules laser energy at a nanometer scale for strong field physics is demonstrated. We report enhancement of high harmonic generation in nano-structured semiconductors using nanoscale amplification of a mid-infrared laser in the sample rather than using large laser amplifier systems. Field amplification is achieved through light confinement in nano-structured semiconductor 3D waveguides. The high harmonic nano…
Interfacing single photons and electrons is a crucial ingredient for sharing quantum information between remote solid-state qubits. Semiconductor nanowires offer the unique possibility to combine optical quantum dots with avalanche photodiodes, thus enabling the conversion of an incoming single photon into a macroscopic current for efficient electrical detection. Currently, millions of excitation events are required to perform electrical read-out of an exciton qubit state. Here we demonstrate multiplication of carriers from only a single exciton generated in a quantum dot after tunneling into …
We predict and experimentally observe the enhancement by three orders of magnitude of phase mismatched second and third harmonic generation in a GaAs cavity at 650nm and 433nm, respectively, well above the absorption edge. Phase locking between the pump and the harmonics changes the effective dispersion of the medium and inhibits absorption. Despite hostile conditions the harmonics become localized inside the cavity leading to relatively large conversion efficiencies. Field localization plays a pivotal role and ushers in a new class of semiconductor-based devices in the visible and UV ranges.
Focusing and guiding light into semiconductor nanostructures can deliver revolutionary concepts for photonic devices, which offer a practical pathway towards next-generation power-efficient optical networks. In this review, we consider the prospects for photonic switches using semiconductor quantum dots (QDs) and photonic cavities which possess unique properties based on their low dimensionality. The optical nonlinearity of such photonic switches is theoretically analyzed by introducing the concept of a field enhancement factor. This approach reveals drastic improvement in both power-density a…
We give a theoretical treatment of single atom detection in an compound, optical micro cavity. The cavity consists of a single mode semiconductor waveguide with a gap to allow atoms to interact with the optical field in the cavity. Optical losses, both in the semiconductor and induced by the gap are considered and we give an estimate of the cavity finesse. We also compute the cooperativity parameter and show how it depends on the gap width and cavity length. Maximization of the cooperativity does not always correspond to maximization of the coupling.
A semiconductor microcavity embedding donor impurities and excited by a laser field is modelled. By including general decay and dephasing processes, and in particular cavity photon leakage, detailed simulations show that control over the spin dynamics is significally enhanced in high-quality-factor cavities, in which case picosecond laser pulses may produce spin-flip with high-fidelity final states.
Photonic integrated circuits that are manufactured with mature semiconductor technology hold great promise for realizing scalable quantum technology. Efficient interfaces between quantum emitters and nanophotonic devices are crucial building blocks for such implementations on silicon chips. These interfaces can be realized as nanobeam optical cavities with high quality factors and wavelength-scale mode volumes, thus providing enhanced coupling between nanoscale quantum emitters and nanophotonic circuits. Realizing such resonant structures is particularly challenging for the visible wavelength …
State-of-the-art optical oscillators employing cryogenic reference cavities are limited in performance by the Brownian thermal noise associated with the mechanical dissipation of the mirror coatings. Recently, crystalline Al$_{1-x}$Ga$_{x}$As/GaAs coatings have emerged as a promising candidate for improved coating thermal noise. We present measurements of the frequency noise of two fully crystalline cryogenic reference cavities with Al$_{0.92}$Ga$_{0.08}$As/GaAs optical coatings. We report on previously unmeasured birefringent noise associated with anti-correlated frequency fluctuations betwee…
We present a monolithic semiconductor microcavity design for enhanced light-matter interaction and photon extraction efficiency of an embedded quantum emitter such as a quantum dot or color center. The microcavity is a hemispherical Fabry-Perot design consisting of a planar back mirror and a top curved mirror. Higher order modes are suppressed in the structure by reducing the height of the curved mirror, leading to efficient photon extraction into a fundamental mode with a Gaussian far-field radiation pattern. The cavity finesse can be varied easily by changing the reflectivity of the mirrors …
Optical parametric amplification is a second-order nonlinear process whereby an optical signal is amplified by a pump via the generation of an idler field. It is the key ingredient of tunable sources of radiation that play an important role in several photonic applications. This mechanism is inherently related to spontaneous parametric down-conversion that currently constitutes the building block for entangled photon pair generation, which has been exploited in modern quantum technologies ranging from computing to communications and cryptography. Here we demonstrate single-pass optical paramet…
Semiconductor quantum dots embedded in photonic-crystal nanostructures have been the subject of intense study. In this context, quantum dots are often considered to be simple two-level emitters, i.e., the complexities arising from the internal finestructure are neglected. We show that due to the intricate spatial variations of the electric field polarization found in photonic crystal, the two orthogonal finestructure states of quantum dots in general both couple significantly to a cavity mode, implying that the two-level description is not sufficient. As a consequence the emission dynamics and…
Frequency combs have become a prominent research area in optics. Of particular interest as integrated comb technology are chip-scale sources, such as semiconductor lasers and microresonators, which consist of resonators embedding a nonlinear medium either with or without population inversion. Such active and passive cavities were so far treated distinctly. Here we propose a formal unification by introducing a general equation that describes both types of cavities. The equation also captures the physics of a hybrid device - a semiconductor ring laser with an external optical drive - in which we…
Cavities with periodically oscillating mirrors have been predicted to excite photon pairs out of the quantum vacuum in a process known as the Dynamical Casimir effect. Here we propose and analyse an experimental layout that can provide an efficient modulation of the effective optical length of a cavity mode in the near-infrared spectral region. An analytical model of the dynamical Casimir emission is developed and compared to the predictions of a direct numerical solution of Maxwell's equations in real time. A sizeable intensity of dynamical Casimir emission is anticipated for realistic operat…
Photonic crystals use periodic structures to create forbidden frequency regions for optical wave propagation, that allow for the creation and integration of complex optical functions in small footprint devices. Such strategy has also been successfully applied to confine mechanical waves and to explore their interaction with light in the so-called optomechanical cavities. Because of their challenging design, these cavities are traditionally fabricated using dedicated high-resolution electron-beam lithography tools that are inherently slow, limiting this solution to small-scale applications or r…
Image-amplifying optical cavities offer an intriguing platform for nonlinear optical processing of two-dimensional signals, with potential applications in optical information processing and optically implemented artificial neural networks. Here, we analyze the performance of a self-imaging degenerate cavity via numerical simulations and show the existence of a cavity size-dependent minimum spread in the transverse mode resonances. This non-degeneracy, in turn, leads to an inherent trade-off between the amplification and the fidelity of the intracavity image as the cavity finesse changes. Our r…
Cavity-mediated magnon-magnon coupling can lead to a transfer of spin-wave excitations between two spatially separated magnetic samples. We enunciate how the application of a two-photon parametric drive to the cavity can lead to stark amplification in this transfer efficiency. The recurrent multiphoton absorption by the cavity opens up an infinite ladder of accessible energy levels, which can induce higher-order transitions within the magnon Fock space. This is reflected in a heightened spin-current response from one of the magnetic samples when the neighboring sample is coherently pumped. The…
Despite tremendous progress in the research on self-assembled nanotechnological building blocks such as macromolecules, nanowires, and two-dimensional materials, synthetic self-assembly methods bridging nanoscopic to macroscopic dimensions remain unscalable and inferior to biological self-assembly. In contrast, planar semiconductor technology has had an immense technological impact owing to its inherent scalability, yet it appears unable to reach the atomic dimensions enabled by self-assembly. Here we use surface forces including Casimir-van der Waals interactions to deterministically self-ass…
Fiber taper waveguides are used to improve the efficiency of room temperature photoluminescence measurements of AlGaAs microdisk resonant cavities with embedded self-assembled InAs quantum dots. As a near-field collection optic, the fiber taper improves the collection efficiency from microdisk lasers by a factor of ~ 15-100 times in comparison to conventional normal incidence free-space collection techniques. In addition, the fiber taper can serve as a efficient means for pumping these devices, and initial measurements employing fiber pumping and collection are presented. Implications of this …
Plasmonic cavities can confine electromagnetic radiation to deep sub-wavelength regimes. This facilitates strong coupling phenomena to be observed at the limit of individual quantum emitters. Here we report an extensive set of measurements of plasmonic cavities hosting one to a few semiconductor quantum dots. Scattering spectra show Rabi splitting, demonstrating that these devices are close to the strong coupling regime. Using Hanbury Brown and Twiss interferometry, we observe non-classical emission, allowing us to directly determine the number of emitters in each device. Surprising features i…
We experimentally demonstrate an optomechanical cavity based on an air-slot photonic crystal cavity with optical quality factor Qo=4.2\times10^4 and a small modal volume of 0.05 cubic wavelengths. The optical mode is coupled with the in-plane mechanical modes with frequencies up to hundreds of MHz. The fundamental mechanical mode shows a frequency of 65 MHz and a mechanical quality factor of 376. The optical spring effect, optical damping and amplification are observed with a large experimental optomechanical coupling rate gom/2pi of 154 GHz/nm, corresponding to a vacuum optomechanical couplin…
We propose a driven optical cavity quantum electrodynamics (QED) set up aimed at directly probing energy transport dynamics in photosynthetic biomolecules. We show that detailed information concerning energy transfer paths and delocalization of exciton states can be inferred (and exciton energies estimated) from the statistical properties of the emitted photons. This approach provides us with a novel spectroscopic tool for the interrogation of biological systems in terms of quantum optical phenomena which have been usually studied for atomic or solid-state systems, e.g. trapped atoms and semic…
Strong amplification in integrated photonics is one of the most desired optical functionalities for computing, communications, sensing, and quantum information processing. Semiconductor gain and cubic nonlinearities, such as four-wave mixing and stimulated Raman and Brillouin scattering, have been among the most studied amplification mechanisms on chip. Alternatively, material platforms with strong quadratic nonlinearities promise numerous advantages with respect to gain and bandwidth, among which nanophotonic lithium niobate is one of the most promising candidates. Here, we combine quasi-phas…
A single quantum dot deterministically coupled to a photonic crystal environment constitutes an indispensable elementary unit to both generate and manipulate single-photons in next-generation quantum photonic circuits. To date, the scaling of the number of these quantum nodes on a fully-integrated chip has been prevented by the use of optical pumping strategies that require a bulky off-chip laser along with the lack of methods to control the energies of nano-cavities and emitters. Here, we concurrently overcome these limitations by demonstrating electrical injection of single excitonic lines w…
We present the design of mid-infrared and THz quantum cascade laser cavities formed from planar photonic crystals with a complete in-plane photonic bandgap. The design is based on a honeycomb lattice, and achieves a full in-plane photonic gap for transverse-magnetic polarized light while preserving a connected pattern for efficient electrical injection. Candidate defects modes for lasing are identified. This lattice is then used as a model system to demonstrate a novel effect: under certain conditions - that are typically satisfied in the THz range - a complete photonic gap can be obtained by …
The ray dynamics of optical cavities exhibits bifurcation points: special geometries at which ray trajectories switch abruptly between stable and unstable. A prominent example is the Fabry-Perot cavity with two planar mirrors, which is widely employed for broad-area semiconductor lasers. Such cavities support lasing in a relatively small number of transverse modes, and the laser is highly susceptible to filamentation and irregular pulsations. Here we demonstrate experimentally that a slight deviation from this bifurcation point (planar cavity) dramatically changes the laser performance. In a n…
Single excitons in semiconductor microcavities represent a solid-state and scalable platform for cavity quantum electrodynamics (c-QED), potentially enabling an interface between flying (photon) and static (exciton) quantum bits in future quantum networks. While both single-photon emission and the strong coupling regime have been demonstrated, further progress has been hampered by the inability to control the coherent evolution of the c-QED system in real time, as needed to produce and harness charge-photon entanglement. Here, using the ultrafast electrical tuning of the exciton energy in a ph…
Numerical Analysis of Photon Absorption of Gate-defined Quantum Dots Embedded in Asymmetric Bull's-eye Optical Cavities
Institute of Industrial Science, The University of Tokyo（东京大学工业科学研究所）；Research Center for Advanced Science and Technology, The University of Tokyo（东京大学先进科学技术研究中心）
Gallium phosphide offers an attractive combination of a high refractive index ($n>3$ for vacuum wavelengths up to 4 μm) and a wide electronic bandgap (2.26 eV), enabling optical cavities with small mode volumes and low two-photon absorption at telecommunication wavelengths. Heating due to strongly confined light fields is therefore greatly reduced. Here, we investigate the benefits of these properties for cavity optomechanics. Utilizing a recently developed fabrication scheme based on direct wafer bonding, we realize integrated one-dimensional photonic crystal cavities made of gallium phosphid…
The smaller the size of a light-emitting microcavity, the more important it becomes to understand the effects of the cavity boundary on the optical mode profile. Conventional methods of laser physics, such as the paraxial approximation, become inapplicable in many of the more exotic cavity designs to be discussed here. Cavities in the shape of microdisks, pillars and rings can yield low lasing thresholds in a wide variety of gain media: quantum wells, wires and even dots, as well as quantum cascade superlattices and GaN. An overview of the experimental and theoretical status is provided, with …
We report the control of spontaneous emission from CdSe/ZnS core-shell quantum dots coupled to novel open-access optical microcavities. The cavities are fabricated by focused ion beam milling, and provide mode volumes less than a cubic micrometre. The quantum dot emission spectrum, spatial modes, and lifetime are all modified substantially by the presence of the cavity, and can be tuned by actively varying the cavity length. An increase in emission rate of 75% is achieved at room temperature, attributed to the Purcell effect in the 'bad emitter' regime. We demonstrate a high degree of control …
Quantum simulation is a promising approach to understand complex strongly correlated many-body systems using relatively simple and tractable systems. Photon-based quantum simulators have great advantages due to the possibility of direct measurements of multi-particle correlations and ease of simulating non-equilibrium physics. However, interparticle interaction in existing photonic systems is often too weak limiting the potential of quantum simulation. Here we propose an approach to enhance the interparticle interaction using exciton-polaritons in MoS$_2$ monolayer quantum-dots embedded in 2D …
The strong interaction of individual quantum emitters with resonant cavities is of fundamental interest for understanding light matter interactions. Plasmonic cavities hold the promise of attaining the strong coupling regime even under ambient conditions and within subdiffraction volumes. Recent experiments revealed strong coupling between individual plasmonic structures and multiple organic molecules, but so far strong coupling at the limit of a single quantum emitter has not been reported. Here we demonstrate vacuum Rabi splitting, a manifestation of strong coupling, using silver bowtie plas…
Hyperuniform disordered photonic materials have recently been shown to display large, complete photonic band gaps and isotropic optical properties, and are emerging as strong candidates for a plethora of optoelectronic applications, making them competitive with many of their periodic and quasiperiodic counterparts. In this work, high quality factor optical cavities in hyperuniform disordered architectures are fabricated through semiconductor slabs and experimentally addressed by scanning near-field optical microscopy. The wide range of confined cavity modes that we detect arise from carefully …
We demonstrate a simple method to obtain accurate optical waveforms with a GHz-level programmable modulation bandwidth and Watt-level output power for wideband optical control of free atoms and molecules. Arbitrary amplitude and phase modulations are transferred from microwave to light with a low-power fiber electro-optical modulator. The sub-milliWatt optical sideband is co-amplified with the optical carrier in a power-balanced fashion through a tapered semiconductor amplifier (TSA). By automatically keeping TSA near saturation in a quasi-continuous manner, typical noise channels associated w…
Optical injection locking is implemented to faithfully transfer the phase noise of a dissipative Kerr microresonator soliton comb in addition to the amplification of the Kerr comb. Unlike Er-doped fiber and semiconductor optical amplifiers, the optical injection locking amplifies the comb mode without degrading the optical signal-to-noise ratio. In addition, we show that the residual phase noise of the optical injection locking is sufficiently small to transfer the relative phase noise of comb modes (equivalent to the repetition frequency) of low phase noise Kerr combs, concluding that the opt…
Chip-based optical amplifiers can significantly expand the functionalities of photonic devices. In particular, optical-parametric amplifiers (OPAs), with engineerable gain-spectra, are well-suited for nonlinear-photonic applications. Chip-based OPAs typically require long waveguides that occupy a large footprint, and high pump powers that cannot be easily produced with chip-scale lasers. We theoretically and experimentally demonstrate a microresonator-assisted regenerative OPA that benefits from the large nonlinearity enhancement of microresonators and yields a high gain in a small footprint. …
We present experimental and numerical studies of broad-area semiconductor lasers with chaotic ray dynamics. The emission intensity distributions at the cavity boundaries are measured and compared to ray tracing simulations and numerical calculations of the passive cavity modes. We study two different cavity geometries, a D-cavity and a stadium, both of which feature fully chaotic ray dynamics. While the far-field distributions exhibit fairly homogeneous emission in all directions, the emission intensity distributions at the cavity boundary are highly inhomogeneous, reflecting the non-uniform i…
A splitting of the fundamental optical modes in micro/nano-cavities comprising semiconductor heterostructures is commonly observed. Given that this splitting plays an important role for the light-matter interaction and hence quantum technology applications, a method for controlling the mode-splitting is important. In this work we use an open microcavity composed of a "bottom" semiconductor distributed Bragg reflector (DBR) incorporating an n-i-p heterostructure, paired with a "top" curved dielectric DBR. We measure the mode-splitting as a function of wavelength across the stopband. We demonstr…
We experimentally demonstrate the difference between a ridge polariton laser, and a conventional edge-emitting ridge laser operating under electron-hole population inversion. The horizontal laser cavities are 20 -- 60 $μ$m long GaN etched ridge structures with vertical Bragg reflectors. We investigate the laser threshold under optical pumping and assess quantitatively the effect of a varying optically-pumped length. The laser effect is achieved for an exciton reservoir length of just 15% of the cavity length, which would not be possible in a conventional ridge laser, with an inversion-less pol…
