Our investigations on porous Si show that on increase of pressure it undergoes crystalline phase transitions instead of pressure induced amorphization - claimed earlier, and the amorphous phase appears only on release of pressure. This amorphous phase, when subjected to higher pressures, transforms reversibly to a higher coordinated primitive hexagonal phase showing a kind of memory effect which may be the only example of its kind in the elemental solids. First principles calculations and thermodynamic arguments help understand these observations.
The preferentially (220) orientated polycrystalline silicon films have been fabricated by performing photon-involved rapid thermal annealing upon amorphous silicon films. In contrast, conventional thermal annealing of the silicon amorphous films results in the preference of (111) orientated crystallization. This difference reveals the overlooked impaction of photons upon silicon atoms, which results in the preferential orientation of lattice plans with the smallest density of atoms on their projection plane rather than the lowest energies.
Normal mode decomposition of atomic vibrations has been used to provide microscopic under-standing of thermal transport in amorphous solids for decades. In normal mode methods, it is naturally assumed that atoms vibrate around their equilibrium positions and that individual normal modes are the fundamental vibrational excitations transporting heat. With the abundance of predictions from normal mode methods and experimental measurements now available, we care-fully analyze these calculations in amorphous silicon, a model amorphous solid. We find a number of discrepancies, suggesting that treati…
Using a combination of quantum and classical computational approaches, we model the electronic structure in amorphous silicon in order gain understanding of the microscopic atomic configurations responsible for light induced degradation of solar cells. We demonstrate that regions of strained silicon bonds could be as important as dangling bonds for creating traps for charge carriers. Further, our results show that defects are preferentially formed when a region in the amorphous silicon contains a hole and a light-induced excitation. These results agree with the puzzling dependencies on tempera…
We present an ab initio calculation of the DC conductivity of amorphous silicon and hydrogenated amorphous silicon. The Kubo-Greenwood formula is used to obtain the DC conductivity, by thermal averaging over extended dynamical simulation. Its application to disordered solids is discussed. The conductivity is computed for a wide range of temperatures and doping is explored in a naive way by shifting the Fermi level. We observed the Meyer-Neldel rule for the electrical conductivity with E_MNR = 0.06 eV and a temperature coefficient of resistance, TCR ~ -2.0% K^-1 for a-Si:H. In general, experime…
We employ ab initio molecular dynamics to simulate the response of hydrogenated amorphous silicon to light exposure (Staebler-Wronski effect). We obtain improved microscopic understanding of PV operation, compute the motion of H atoms, and modes of light-induced degradation of photovoltaics. We clarify existing models of light-induced change in aSi:H and show that the Hydrogen collision model of Branz3 is correct in essentials.
Locally, the atomic structure in well annealed amorphous silicon appears similar to that of crystalline silicon. We address here the question whether a point defect, specifically a vacancy, in amorphous silicon also resembles that in the crystal. From density functional theory calculations of a large number of nearly defect free configurations, relaxed after an atom has been removed, we conclude that there is little similarity. The analysis is based on formation energy, relaxation energy, bond lengths, bond angles, Voronoï volume, coordination, atomic charge and electronic gap states. All thes…
The structural relaxation of pure amorphous silicon (a-Si) and hydrogenated amorphous silicon (a-Si:H) materials, that occurs during thermal annealing experiments, has been analysed by Raman spectroscopy and differential scanning calorimetry. Unlike a-Si, the heat evolved from a-Si:H cannot be explained by relaxation of the Si-Si network strain, but it reveals a derelaxation of the bond angle strain. Since the state of relaxation after annealing is very similar for pure and hydrogenated materials, our results give strong experimental support to the predicted configurational gap between a-Si an…
This study provides a new insight into the processes which occur when thin film hydrogenated amorphous silicon is subjected to UV laser irradiation in the presence of oxygen. It achieves this by observing the effects of subjecting the films to progressively increasing laser radiation doses. This reveals that an array of nuclei is first created, leading to the formation of a well-defined crystalline network, consistent with the structure of silicon oxide. Further irradiation results in the formation of cone-like structures on the crystalline network, due to silicon-oxygen bond breakage and migr…
The thermally-induced structural evolution of silicon- and oxygen-containing hydrogenated amorphous carbon (a-C:H:Si:O) was investigated by X-ray photoelectron and absorption spectroscopy, as well as molecular dynamics (MD) simulations. The spectroscopic results indicate that the introduction of Si and O in hydrogenated amorphous carbon (a-C:H) increases the activation energy for the conversion of sp3- to sp2-bonded C. MD simulations indicate that the higher thermal stability of a-C:H:Si:O compared to a-C:H derives from the lower fraction of strained C-C sp3 bonds in a-C:H:Si:O.
We report first principles ab initio density functional calculations of hydrogen dynam- ics in hydrogenated amorphous silicon. Thermal motion of the host Si atoms drives H diffusion, as we demonstrate by direct simulation and explain with simple models. Si-Si bond centers and Si ring centers are local energy minima as expected. We also describe a new mechanism for break- ing Si-H bonds to release free atomic H into the network: a fluctuation bond center detachment (FBCD) assisted diffusion. H dynamics in a-Si:H is dominated by structural fluctuations intrinsic to the amorphous phase not presen…
On the basis of density functional calculations and using Bader's atom in molecule theory, this article presents quantitative microscopic analyses on the bonding properties of amorphous silicon (a-Si) which could reflect in the observable mechanical and electronic behaviors of this material. In addition, the occurrence and strength of quantum confinement of charge carriers in a composition of silicon crystal nano slabs (SiNSs) embedded in hydrogenated a-Si (a-Si:H) semiconductor are studied. It is shown that the strongest confinement effect happens for Si slabs limited in [100] direction. The …
Amorphous silicon materials and its alloys become extensively used in some technical applications involving large area of the microelectronic and optoelectronic devices. However, the amorphous-crystalline transition, segregation and diffusion processes still have numerous unanswered questions. In this work we study the Sb diffusion into an amorphous Si film by means of Secondary Neutral Mass Spectrometry (SNMS). Amorphous Si/Si1-xSbx/Si tri-layer samples with 5 at% antimony concentration were prepared by DC magnetron sputtering onto Si substrate at room temperature. Annealing of the samples we…
The evolution is presented of infrared transmission spectra of hydrogenated and chlorinated amorphous silicon films versus the chlorine concentration and the annealing temperature. As the chlorine content increases, an increase of the 2100 cm-1 band intensity is observed. We associate this effect with the existence of SiH2CI2, mixed configurations. The Sic1 stretching band, located at 545 cm-1 in unannealed samples, shifts continuously up to 590 cm-1 as the annealing temperature increases. This displacement is attributed to a predominance of SiCI2, species around 500°C and their transformation…
The dynamics of charge carriers in amorphous semiconductors fundamentally differ from those in crystalline semiconductors due to the lack of long-range order and the high defect density. Despite intensive technology-driven research interests and the existence of well-established experimental techniques, such as photoconductivity time-of-flight and ultrafast optical measurements, many aspects of the dynamics of photo-excited charge carriers in amorphous semiconductors remain poorly understood. Here we demonstrate direct imaging of carrier dynamics in space and time after photo-excitation in hyd…
We use the maximally-localized Wannier function method to study bonding properties in amorphous silicon. This study represents, to our knowledge, the first application of the Wannier-function analysis to a disordered system. Our results show that, in the presence of disorder, this method is extremely helpful in providing an unambiguous picture of the bond distribution. In particular, defect configurations can be studied and characterized with a novel degree of accuracy that was not available before.
We use accurate first principles methods to study the network dynamics of hydrogenated amorphous silicon, including the motion of hydrogen. In addition to studies of atomic dynamics in the electronic ground state, we also adopt a simple procedure to track the H dynamics in light-excited states. Consistent with recent experiments and computer simulations, we find that dihydride structures are formed for dynamics in the light-excited states, and we give explicit examples of pathways to these states. Our simulations appear to be consistent with aspects of the Staebler-Wronski effect, such as the …
We apply a new method "force enhanced atomic refinement" (FEAR) to create a computer model of amorphous silicon (a-Si), based upon the highly precise X-ray diffraction experiments of Laaziri et al. The logic underlying our calculation is to estimate the structure of a real sample a-Si using experimental data and chemical information included in a non-biased way, starting from random coordinates. The model is in close agreement with experiment and also sits at a suitable minimum energy according to density functional calculations. In agreement with experiments, we find a small concentration of …
The atomic structure of amorphous materials is believed to be well described by the continuous random network model. We present an algorithm for the generation of large, high-quality continuous random networks. The algorithm is a variation of the "sillium" approach introduced by Wooten, Winer, and Weaire. By employing local relaxation techniques, local atomic rearrangements can be tried that scale almost independently of system size. This scaling property of the algorithm paves the way for the generation of realistic device-size atomic networks.
Amorphous silicon films prepared by electron beam evaporation have systematically and substantially greater atomic density for higher thickness, higher growth temperature, and slower deposition rate, reaching the density of crystalline Si when films of thickness greater than ~300 nm are grown at 425 $^{\circ}$C and at <1 $Å$/sec. A combination of spectroscopic techniques provide insight into atomic disorder, local strains, dangling bonds, and nanovoids. Electron diffraction shows that the short-range order of the amorphous silicon is similar at all growth temperatures, but fluctuation electron…
Specific heat measurements from 2 to 300 K of hydrogenated amorphous silicon prepared by hot-wire chemical vapor deposition show a large excess specific heat at low temperature, significantly larger than the Debye specific heat calculated from the sound velocity. The as-prepared films have a Schottky anomaly that is associated with metastable hydrogen in the amorphous network, as well as large linear and excess cubic term commonly associated with tunneling two-level systems in amorphous solids. Annealing at 200 °C, a temperature that enables hydrogen mobility but not evaporation, irreversibly …
Crystalline to amorphous phase transformation during initial lithiation in (100) silicon-wafers is studied in an electrochemical cell with lithium metal as the counter and reference electrode. It is demonstrated that severe stress jumps across the phase boundary lead to fracture and damage, which is an essential consideration in designing silicon based anodes for lithium ion batteries. During initial lithiation, a moving phase boundary advances into the wafer starting from the surface facing the lithium electrode, transforming crystalline silicon into amorphous LixSi. The resulting biaxial com…
We have used tight-binding molecular-dynamics simulations to investigate the role of point defects (vacancies and interstitials) on structural relaxation in amorphous silicon. Our calculations give unambiguous evidence that point defects can be defined in the amorphous solid, showing up as anomalies in the valence-charge/Voronoi-volume relation. The changes in the radial distribution functions that take place during annealing are shown to be in close agreement with recent, highly-accurate x-ray diffraction measurements. Our calculations provide strong evidence that structural relaxation in a-S…
The structural features of the interface between the cystalline and amorphous phases of Si solid are studied in simulations based on a combination of empirical interatomic potentials and a nonorthogonal tight-binding model. The tight-binding Hamiltonian was created and tested for the types of structures and distortions anticipated to occur at this interface. The simulations indicate the presence of a number of interesting features near the interface. The features that may lead to crystallization upon heating include <110> chains with some defects, most prominently dimers similar to those on th…
A structural model of hydrogenated amorphous silicon containing an isolated dangling bond is used to investigate the effects of electron interactions on the electronic level splittings, localization of charge and spin, and fluctuations in charge and spin. These properties are calculated with a recently developed density-matrix correlation-energy functional applied to a generalized Anderson Hamiltonian, consisting of tight-binding one-electron terms parametrizing hydrogenated amorphous silicon plus a local interaction term. The energy level splittings approach an asymptotic value for large valu…
Amorphous silicon contains tunneling two-level systems, which are the dominant energy loss mechanisms for amorphous solids at low temperatures. These two-level systems affect both mechanical and electromagnetic oscillators and are believed to produce thermal and electromagnetic noise and energy loss. However, it is unclear whether the two-level systems that dominate mechanical and dielectric losses are the same; the former relies on phonon-TLS coupling, with an elastic field coupling constant, $γ$, while the latter depends on a TLS dipole moment, $p_0$, which couples to the electromagnetic fie…
The kinetics of intrinsic and dopant-enhanced solid phase epitaxy (SPE) are stud- ied in buried amorphous Si (a-Si) layers in which SPE is not retarded by H. As, P, B and Al profiles were formed by multiple energy ion implantation over a con- centration range of 1 - 30 x 1019 /cm3. Anneals were performed in air over the temperature range 460-660 oC and the rate of interface motion was monitored us- ing time resolved reflectivity. The dopant-enhanced SPE rates were modeled with the generalized Fermi level shifting model using degenerate semiconductor statis- tics. The effect of band bending bet…
Amorphous materials are coming within reach of realistic computer simulations, but new approaches are needed to fully understand their intricate atomic structures. Here, we show how machine-learning (ML)-based techniques can give new, quantitative chemical insight into the atomic-scale structure of amorphous silicon (a-Si). Based on a similarity function ("kernel"), we define a structural metric that unifies the description of nearest- and next-nearest-neighbor environments in the amorphous state. We apply this to an ensemble of a-Si networks, generated in melt-quench simulations with an ML-ba…
Understanding the structural origins of the properties of amorphous materials remains one of the most important challenges in structural science. In this study we demonstrate that local 'structural simplicity', embodied by the degree to which atomic environments within a material are similar to each other, is powerful concept for rationalising the structure of canonical amorphous material amorphous silicon (a-Si). We show, by restraining a reverse Monte Carlo refinement against pair distribution function (PDF) data to be simpler, that the simplest model consistent with the PDF is a continuous …
The vibrational properties of a high-quality realistic model of amorphous silicon are examined. The longitudinal and transverse dynamical structure factors are calculated, and fitted to a damped harmonic oscillator (DHO) function. The width $Γ$ of the best-fit DHO to the longitudinal dynamical structure factor scales approximately as $k^{2}$ for wavevectors $k\lesssim0.55\textrmÅ^{-1}$, which is above the Ioffe-Regel crossover frequency separating the propagating and diffusing regimes, occurring at $k=0.38\pm0.03\textrmÅ^{-1}$. Using the DHO function as a fitting function for the transverse dy…
We prepared thin layers of amorphous silicon by deposition of a liquid-phase polysilane precurser on glass substrate. Raman scattering provides evidence for residual tensile stress in the silicon, which is evaluated quantitatively. Under treatment with hydrofluoric acid, this stress leads to spiral cracks in the silicon. We explain the process of crack formation and examine this phenomenon both analytically and numerically, the latter with the finite element method (FEM). The FEM yields the geometry correction factor for such spiral cracks in terms of the Griffith criterion. This allows for th…
The band offsets between crystalline and hydrogenated amorphous silicon (a-Si:H) are key parameters governing the charge transport in modern silicon hetrojunction solar cells. They are an important input for macroscopic simulators that are used to further optimize the solar cell. Past experimental studies, using X-ray photoelectron spectroscopy (XPS) and capacitance-voltage measurements, have yielded conflicting results on the band offset. Here we present a computational study on the band offsets. It is based on atomistic models and density-functional theory (DFT). The amorphous part of the in…
Visible luminescence is observed from the composite of SiO2 with embedded silicon nanocrystallites produced by femtosecond laser irradiation of hydrogenated amorphous silicon (a-Si:H) film in air. The photoluminescence originates from the defect states at the interface between silicon crystallites and SiO2 matrix. The method could be used for fabrication of luminescent layers to increase energy conversion of a-Si:H solar cells.
One important use of layered semiconductors such as molybdenum disulfide (MoS2) could be in making novel heterojunction devices leading to functionalities unachievable using conventional semiconductors. Here we demonstrate an ultrafast metal-semiconductor-metal heterojunction photodetector, made of MoS2 and amorphous silicon (a-Si), with rise and fall times of about 0.3 ms. This is more than an order of magnitude improvement over response times of conventional a-Si (~5 ms) and best reported MoS2 devices (~50 ms). The van-der-waals heterojunction presented here yields a high photoresponsivity o…
The structural and electronic properties of amorphous silicon ($a$-Si) are investigated by first-principles calculations based on the density-functional theory (DFT), focusing on the intrinsic structural defects. By simulated melting and quenching of a crystalline silicon model through the Car-Parrinello molecular dynamics (CPMD), we generate several different $a$-Si samples, in which three-fold ($T_3$), five-fold ($T_5$), and anomalous four-fold ($T_{4a}$) defects are contained. Using the samples, we clarify how the disordered structure of $a$-Si affects the characters of its density of state…
We have studied the effects of oxygen on hydrogenated amorphous/crystalline silicon films in terms of their structural and optical properties. Different hydrogenated silicon oxide (SiO:H) and silicon (Si:H) films are fabricated between microcrystalline and amorphous transition region. X-ray diffraction, Raman, FTIR and UV-Vis emission spectrometry have been used to characterize different films. A comparison of the results with those of different types of films like hydrogenated amorphous silicon oxide (a-SiO:H), hydrogenated amorphous silicon (a-Si:H) and microcrystalline silicon ($μ$c-Si:H) f…
We have extended our experimentally constrained molecular relaxation technique (P. Biswas {\it et al}, Phys. Rev. B {\bf 71} 54204 (2005)) to hydrogenated amorphous silicon: a 540-atom model with 7.4 % hydrogen and a 611-atom model with 22 % hydrogen were constructed. Starting from a random configuration, using physically relevant constraints, {\it ab initio} interactions and the experimental static structure factor, we construct realistic models of hydrogenated amorphous silicon. Our models confirm the presence of a high frequency localized band in the vibrational density of states due to Si-…
An implementation of the Reverse Monte Carlo algorithm is presented for the study of amorphous tetrahedral semiconductors. By taking into account a number of constraints that describe the tetrahedral bonding geometry along with the radial distribution function, we construct a model of amorphous silicon using the reverse monte carlo technique. Starting from a completely random configuration, we generate a model of amorphous silicon containing 500 atoms closely reproducing the experimental static structure factor and bond angle distribution and in improved agreement with electronic properties. C…
Structurally disordered materials continue to pose fundamental questions, including that of how different disordered phases ("polyamorphs") can coexist and transform from one to another. As a widely studied case, amorphous silicon (a-Si) forms a fourfold-coordinated, covalent random network at ambient conditions, but much higher-coordinated, metallic-like phases under pressure. However, a detailed mechanistic understanding of the liquid-amorphous and amorphous-amorphous transitions in silicon has been lacking, due to intrinsic limitations of even the most advanced experimental and computationa…
In this paper we discuss the application of current it ab initio computer simulation techniques to hydrogenated amorphous silicon (a-Si:H). We begin by discussing thermal fluctuation in the number of coordination defects in the material, and its temperature dependence. We connect this to the ``fluctuating bond center detachment" mechanism for liberating H bonded to Si atoms. Next, from extended thermal MD simulation, we illustrate various mechanisms of H motion. The dynamics of the lattice is then linked to the electrons, and we point out that the squared electron-lattice coupling (and the the…
Amorphous silicon (a-Si) is a widely studied non-crystalline material, and yet the subtle details of its atomistic structure are still unclear. Here, we show that accurate structural models of a-Si can be obtained by harnessing the power of machine-learning algorithms to create interatomic potentials. Our best a-Si network is obtained by cooling from the melt in molecular-dynamics simulations, at a rate of 10$^{11}$ K/s (that is, on the 10 ns timescale). This structure shows a defect concentration of below 2% and agrees with experiments regarding excess energies, diffraction data, as well as $…
Hydrogenation of amorphous silicon (a-Si:H) is critical for reducing defect densities, passivating mid-gap states and surfaces, and improving photoconductivity in silicon-based electro-optical devices. Modelling the atomic scale structure of this material is critical to understanding these processes, which in turn is needed to describe c-Si/a-Si:H heterjunctions that are at the heart of the modern solar cells with world record efficiency. Density functional theory (DFT) studies achieve the required high accuracy but are limited to moderate system sizes a hundred atoms or so by their high compu…
Accurate prediction of structural and mechanical properties on amorphous materials enabled through machine-learning potentials: a case study of silicon nitride
The present work is essentially focused on the study of optical and structural properties of hydrogenated amorphous silicon thin films (a-Si:H) prepared by radio-frequency cathodic sputtering. We examine separately the influence of hydrogen partial pressure during film deposition, and the effect of post-deposition thermal annealings on the main optical characteristics of the layers such as refraction index, optical gap and Urbach energy. Using the grazing X-rays reflectometry technique, thin film structural properties are examined immediately after films deposition as well as after surface oxi…
The interface chemistry of silicon nanocrystals (NCs) embedded in amorphous oxide matrix is studied through molecular dynamics simulations with the chemical environment described by the reactive force field model. Our results indicate that the Si NC-oxide interface is more involved than the previously proposed schemes which were based on solely simple bridge or double bonds. We identify different types of three-coordinated oxygen complexes, previously not noted. The abundance and the charge distribution of each oxygen complex is determined as a function of the NC size as well as the transition…
Here we describe a new high frequency/high field continuous wave and pulsed electrically detected magnetic resonance (CW EDMR and pEDMR) setup, operating at 263 GHz and resonance fields between 0 and 12 T. Spin dependent transport in illuminated hydrogenated amorphous silicon p-i-n solar cells at 5 K and 90 K was studied by in operando 263 GHz CW and pEDMR alongside with complementary X-band CW EDMR. Benefiting from the superior resolution at 263 GHz, we were able to better resolve EDMR signals originating from spin dependent hopping and recombination processes. 5 K EDMR spectra were found to …
We use empirical molecular dynamics technique to study the low-energy vibrations in a large 4096 atom model for pure amorphous silicon and a set of models with voids of different size based on it. Numerical vibrational eigenvalues and eigenvectors for our models are obtained by exact diagonalization of their dynamical matrices. Our calculations show that localized low-energy vibrational excitations of rather complex structure are present in amorphous silicon models with voids. According to their spatial localization patterns we make an attempt to classify these excitations as modes associated …
We deposit intrinsic hydrogenated amorphous silicon (a-Si:H) thin films by reactive pulsed laser deposition, for various hydrogen pressures in the 0-20 Pa range, at a low deposition temperature of 120C, and investigate the hydrogen incorporation, structural, optical, and electrical properties of the films, as a function of the ambient hydrogen pressure. The film thickness decreases linearly as the hydrogen pressure increases. The hydrogen content of the films is determined by infrared spectroscopy and the optical bandgap from UV-Vis-NIR transmittance and reflectance measurements. Electric meas…
In this paper, we study several structural models of amorphous silicon, and discuss structural and electronic features common to all. We note spatial correlations between short bonds, and similar correlations between long bonds. Such effects persist under a first principles relaxation of the system and at finite temperature. Next we explore the nature of the band tail states and find the states to possess a filamentary structure. We detail correlations between local geometry and the band tails.
In this letter we derive a new method for direct calculation of the modal contributions to thermal conductivity, which is termed Green-Kubo modal analysis (GKMA). The GKMA method combines the lattice dynamics formalism with the Green-Kubo formula for thermal conductivity, such that the thermal conductivity becomes a direct summation of modal contributions, where one need not define the phonon velocity. As a result the GKMA method can be applied to any material/group of atoms where the atoms vibrate around stable equilibrium positions, which includes not only crystalline line compounds, but als…
Several amorphous silicon structures were generated using a classical molecular dynamics (MD) protocol of melting and quenching with different quenching rates. An analysis of the calculated electronic properties of these structures revealed that the midgap state density of a-Si which is of interest for solar cell and thin film transistor applications can be correlated to bond angle standard deviation. We also found that this parameter can strongly determine the excess energy of a-Si, which is an important criteria in theoretically generating realistic atomic structures of a-Si.
Mechanical shear deformations lead, in some cases, to effects similar to those resulting from ion irradiation. Here we characterize the effects of shear velocity and temperature on amorphous silicon (\aSi) modelled using classical molecular dynamics simulations based on the empirical Environment Dependent Inter-atomic Potential (EDIP). With increasing shear velocity at low temperature, we find a systematic increase in the internal strain leading to the rapid appearance of structural defects (5-fold coordinated atoms). The impacts of externally applied strain can be almost fully compensated by …
The structural relaxation of amorphous materials is described as arising from the superposition of elementary processes with varying activation energies. We show that it is possible to obtain the kinetic parameters of these processes from differential scanning calorimetry experiments. The transformation rate is predicted for the transient decay when an isotherm is reached and for the relaxation threshold detected in partially relaxed samples. Good agreement is obtained with experiment if the individual components transform through first-order kinetics, but inconsistencies arise for second-orde…
Exponential band edges have been observed in a variety of materials, both crystalline and amorphous. In this paper, we infer the structural origins of these tails in amorphous and defective crystalline Si by direct calculation with current {\it ab initio} methods. We find that exponential tails appear in relaxed models of diamond with suitable point defects. In amorphous silicon (a-Si), we find that structural filaments of short bonds and long bonds exist in the network, and that the tail states near the extreme edges of both band tails are are also filamentary, with much localization on the s…