Motivated by the reported peculiar dynamics of a red blood cell in shear flow, we develop an analytical theory for the motion of a nearly--spherical fluid particle enclosed by a visco--elastic incompressible interface in linear flows. The analysis explains the effect of particle deformability on the transition from tumbling to swinging as the shear rate increases. Near the transition, intermittent behavior is predicted only if the particle has a fixed shape; the intermittency disappears for a deformable particle. Comparison with available phenomenological models based on the fixed shape assumption highlights their physical foundations and limitations.
Driven or active suspensions can display fascinating collective behavior, where coherent motions or structures arise on a scale much larger than that of the constituent particles. Here, we report experiments and numerical simulations revealing that red blood cells (RBCs) assemble into regular patterns in a confined shear flow. The order is of pure hydrodynamic and inertialess origin, and emerges from a subtle interplay between (i) hydrodynamic repulsion by the bounding walls which drives deformable cells towards the channel mid-plane and (ii) intercellular hydrodynamic interactions which can b…
Motivated by the complex rheological behaviors observed in small/micro scale blood vessels, such as the Fahraeus effect, plasma-skimming, shear-thinning, etc., we develop a non-linear suspension model for blood. The viscosity is assumed to depend on the volume fraction (hematocrit) and the shear rate. The migration of the red blood cells (RBCs) is studied using a concentration flux equation. A parametric study with two representative problems, namely simple shear flow and a pressure driven flow demonstrate the ability of this reduced-order model to reproduce several key features of the two-flu…
The distribution of Red Blood Cells in a confined channel flow is inhomogeneous and shows a marked depletion near the walls due to a competition between migration away from the walls and shear-induced diffusion resulting from interactions between particles. We investigated the lift of RBCs in a shear flow near a wall and measured a significant lift velocity despite the tumbling motion of cells. We also provide values for the collective and anisotropic shear-induced diffusion of a cloud of RBCs, both in the direction of shear and in the direction of vorticity. A generic down-gradient subdiffusi…
In 1926, Murray proposed the first law for the optimal design of blood vessels. He minimized the power dissipation arising from the trade-off between fluid circulation and blood maintenance. The law, based on a constant fluid viscosity, states that in the optimal configuration the fluid flow rate inside the vessel is proportional to the cube of the vessel radius, implying that wall shear stress is not dependent on the vessel radius. Murray's law has been found to be true in blood macrocirculation, but not in microcirculation. In 2005, Alarcón et al took into account the non monotonous dependen…
The fluid dynamics video that is presented here outlines recent advances in the simulation of multiphase cellular blood flow through the direct numerical simulations of deformable red blood cells (RBCs) demonstrated through several numerical experiments. Videos show particle deformation, shear stress on the particle surface, and the formation of particle clusters in both Hagen-Poiseuille and shear flow.
An exhaustive description of the dynamics under shear flow of a large number of red blood cells in dilute regime is proposed, which highlights and takes into account the dispersion in cell properties within a given blood sample. Physiological suspending fluid viscosity is considered, a configuration surprisingly seldom considered in experimental studies, as well as a more viscous fluid that is a reference in the literature. Stable and unstable flipping motions well described by Jeffery orbits or modified Jeffery orbits are identified, as well as transitions to and from tank-treading motion in …
Using a multiscale blood flow solver, the complete diffusion tensor of nanoparticle (NP) in sheared cellular blood flow is calculated over a wide range of shear rate and haematocrit. In the short-time regime, NPs exhibit anomalous dispersive behaviors under high shear and high haematocrit due to the transient elongation and alignment of the red blood cells (RBCs). In the long-time regime, the NP diffusion tensor features high anisotropy. Particularly, there exists a critical shear rate ($\sim$100 $s^{-1}$) around which the shear-rate dependence of the diffusivity tensor changes from linear to …
The fluid dynamics video presented here outlines recent advances in the simulation of multiphase cellular blood flow through the direct numerical simulations of deformable red blood cells (RBCs) demonstrated through several numerical experiments. Videos show RBC deformations in variety of numerical simulations, relative viscosity of a suspension of RBCs in shear, and the cell-depleted wall layer for blood Hagen--Poiseuille flow.
Shear stress plays an important role in the creation and evolution of atherosclerosis. An key element for in-vivo measurements and extrapolations is the dependence of shear stress on body mass. In the case of a Poiseuille modeling of the blood flow, P. Weinberg and C. Ethier have shown that shear stress on the aortic endothelium varies like body mass to the power $-\frac{3}{8}$, and is therefore 20-fold higher in mice than in men. However, by considering a more physiological oscillating Poiseuille + Womersley combinated flow in the aorta, we show that results differ notably: at larger masses (…
Perturbations to the homeostatic distribution of mechanical forces exerted by blood on the endothelial layer have been correlated with vascular pathologies including intracranial aneurysms and atherosclerosis. Recent computational work suggests that in order to correctly characterise such forces, the shear-thinning properties of blood must be taken into account. To the best of our knowledge, these findings have never been compared against experimentally observed pathological thresholds. In the current work, we apply the three-band diagram (TBD) analysis due to Gizzi et al. to assess the impact…
Haematocrit and Shear Rate Modulate Local Cell-free Layer Thickness and Platelet Margination in Blood Flow Along a Sinusoidal Wall
Università degli Studi di Napoli “Federico II”（那不勒斯费德里科二世大学）；CEINGE Biotecnologie Avanzate “Franco Salvatore”（CEINGE先进生物技术“弗朗哥·萨勒瓦托雷”中心）；University of Edinburgh（爱丁堡大学）
Many numerical studies of blood flow impose a rigid wall assumption due to the simplicity of its implementation compared to a full coupling to a solid mechanics model. In this paper, we present a localised method for incorporating the effects of elastic walls into blood flow simulations using the lattice Boltzmann method. We demonstrate that our approach is able to more accurately capture the flow behaviour expected in an elastic walled vessel than a rigid wall model and achieves this without a loss of computational performance. We also demonstrate that our approach can capture trends in wall …
The supply of oxygen and nutrients and the disposal of metabolic waste in the organs depend strongly on how blood, especially red blood cells, flow through the microvascular network. Macromolecular plasma proteins such as fibrinogen cause red blood cells to form large aggregates, called rouleaux, which are usually assumed to be disaggregated in the circulation due to the shear forces present in bulk flow. This leads to the assumption that rouleaux formation is only relevant in the venule network and in arterioles at low shear rates or stasis. Thanks to an excellent agreement between combined e…
Thrombosis under high-shear conditions is mediated by the mechanosensitive blood glycoprotein von Willebrand Factor (vWF). vWF unfolds in response to strong flow gradients and facilitates rapid recruitment of platelets in flowing blood. While the thrombogenic effect of vWF is well recognized, its conformational response in complex flows has largely been omitted from numerical models of thrombosis. We recently presented a continuum model for the unfolding of vWF, where we represented vWF transport and its flow-induced conformational change using convection-diffusion-reaction equations. Here, we…
Computational modeling and simulation are presented on the motion of red blood cells behind a moving interface in a capillary. The methodology is based on an immersed boundary method and the skeleton structure of the red blood cell (RBC) membrane is modeled as a spring network. The computational domain is moving with either a designated RBC or an interface in an infinitely long two-dimensional channel with an undisturbed flow field in front of the domain. The tanking-treading and the inclination angle of a cell in a simple shear flow are briefly discussed for the validation purpose. We then pr…
We investigate the rheological characteristics of human blood plasma in shear and elongational flows. While we can confirm a Newtonian behavior in shear flow within experimental resolution, we find a viscoelastic behavior of blood plasma in the pure extensional flow of a capillary break-up rheometer. The influence of the viscoelasticity of blood plasma on capillary blood flow is tested in a microfluidic device with a contraction-expansion geometry. Differential pressure measurements revealed that the plasma has a pronounced flow resistance compared to that of pure water. Supplementary measurem…
In this article, effects of heat transfer on MHD blood flow through a stenosed inclined porous artery with heat source have been investigated. The viscosity of the blood is assumed to be varying radially with hematocrit throughout the region of the artery. Governing equations have been derived by treating blood as incompressible magnetohydrodynamic (MHD) Newtonian fluid. Momentum and energy equations of the fluid flow are simplified under the assumption of mild stenosis. Homotopy perturbation method (HPM) is used to solve nonlinear differential equations for velocity and temperature profiles o…
Red blood cells (RBCs) -- erythrocytes -- suspended in plasma tend to aggregate and form rouleaux. During aggregation the first stage consists in the formation of RBC doublets [Blood cells, molecules, and diseases 25, 339 (1999)]. While aggregates are normally dissociated by moderate flow stresses, under some pathological conditions the aggregation becomes irreversible, which leads to high blood viscosity and vessel occlusion. We perform here two-dimensional simulations to study the doublet dynamics under shear flow in different conditions and its impact on rheology. We sum up our results on t…
Cardiac disease and clinical intervention may both lead to an increased risk for thrombosis events due to modified blood flow in the heart, and thereby a change in the mechanical stimuli of blood cells passing through the chambers of the heart. Specifically, the degree of platelet activation is influenced by the level and type of mechanical stresses in the blood flow. Here we analyze the blood flow in the left ventricle of the heart through a computational model constructed from patient-specific data. The blood flow in the ventricle is modeled by the Navier-Stokes equations, and the flow throu…
The fluid shear stress is an important regulator of the cardiovascular system via the endothelium-derived relaxing factor (EDRF) that is Nitric Oxide. This mechanism involves biochemical reactions in an arterial wall. The autoregulation process is managed by the vascular tonus and gives the negative feedback for the shear stress changing. A new mathematical model for the autoregulation of a blood flow through arteria under the constant transmural pressure is presented. Endothelium-derived relaxing factor Nitric Oxide, the multi-layer structure of an arterial wall, and kinetic-diffusion process…
In this paper, effects of heat and mass transfer on two-phase pulsatile blood flow through a narrowed stenosed artery with radiation and the chemical reaction have been investigated. A vertical artery is assumed in which magnetic field is applied along the radial direction of the artery. The characteristics of blood in narrow arteries are analyzed by considering blood as Newtonian fluid in both core as well as in plasma regions. Exact solutions have been found for velocity, energy and concentration equations of the blood flow. To understand the behavior of blood flow, graphs of the velocity pr…
In this paper, we present a mathematical and numerical model for blood solidification and its rupture in stenosed arteries. The interaction between the blood flow and an existing stenosis in the arterial wall is modeled as a three dimensional fluid-structure interaction problem. The blood is assumed to be a non-Newtonian incompressible fluid with a time-dependent viscosity that obeys a modified Carreau's model and the flow dynamics is described by the Navier-Stokes equations. Whereas, the arterial wall is considered a hyperelastic material whose displacement satisfies the quasi-static equilibr…
We present a numerical analysis of the rheology of a suspension of red blood cells (RBCs) in a wall-bounded shear flow. The flow is assumed as almost inertialess. The suspension of RBCs, modeled as biconcave capsules whose membrane follows the Skalak constitutive law, is simulated for a wide range of viscosity ratios between the cytoplasm and plasma: $λ$ = 0.1-10, for volume fractions up to $ϕ$ = 0.41 and for different capillary numbers ($Ca$). Our numerical results show that an RBC at low $Ca$ tends to orient to the shear plane and exhibits the so-called rolling motion, a stable mode with hig…
We investigate the shear thinning of red blood cell - dextran suspensions. Microscopic images show that at low polymer concentration, aggregation increases with increasing concentration until it reaches a maximum and then decreases again to non-aggregation. This bell shape dependency is also deduced from the rheological measurements, if the data are correctly normalized by the viscosity of the suspending phase since a significant amount of polymers adsorb to the cell surfaces. We find that the position of the maximum of this shear rate dependent bell shape increases with increasing viscosity o…
We numerically investigate the influence of flow development on secondary flow patterns and subsequent wall shear stress distributions in a curved artery model, and we compute vascular metrics commonly used to assess variations in blood flow characteristics as it applies to arterial disease. We model a human artery with a simple, rigid 180-degree curved tube with circular cross-section and constant curvature, neglecting effects of taper, torsion and elasticity. High-fidelity numerical results are computed from an in-house discontinuous spectral element flow solver. The flow rate used in this s…
Background and Objective: The role of red blood cell dynamics is emphasised in certain cardiovascular diseases, and thus needs to be closely studied. A multiphase model of blood flow allows the resolution of locally varying density of red blood cells within a complex vessel geometrical domain, and haemodynamic consequences of such build up. Methods: A novel computational fluid dynamics solver for simulating multiphase flows is used for modelling blood flow using level set for a sharp interface representation. Single-phase simulations and reduced order models are used for pressure comparisons. …
High-fidelity patient-specific modeling of cardiovascular flows and hemodynamics is challenging. Direct blood flow measurement inside the body with in-vivo measurement modalities such as 4D flow magnetic resonance imaging (4D flow MRI) suffer from low resolution and acquisition noise. In-vitro experimental modeling and patient-specific computational fluid dynamics (CFD) models are subject to uncertainty in patient-specific boundary conditions and model parameters. Furthermore, collecting blood flow data in the near-wall region (e.g., wall shear stress) with experimental measurement modalities …
This work investigates the motion of neutrally-buoyant, slightly deformable straight and curved prolate capsules in unbounded simple shear flow at zero Reynolds number using direct simulations. The curved capsules serve as a model for the typical crescent-shaped sickle red blood cells in sickle cell disease (SCD). The effects of deformability and curvature on the dynamics are revealed. We show that with low deformability, straight prolate spheroidal capsules tumble in the shear plane as their unique asymptotically stable orbit, which contrasts with that for rigid spheroids where infinitely man…
Thromboembolic complications remain a central issue in management of patients on mechanical circulatory support. Despite the best practices employed in design and manufacturing of modern ventricular assist devices, complexity and modular nature of these systems often introduces internal steps and crevices in the flow path which can serve as nidus for thrombus formation. Thrombotic potential is influenced by multiple factors including the characteristics of the flow and surface chemistry of the biomaterial. This study explored these elements in the setting of blood flow over a micro-crevice usi…
Numerical simulations of pulsatile blood flow in an aortic coarctation require the use of turbulence modeling. This paper considers three models from the class of large eddy simulation (LES) models (Smagorinsky, Vreman, $\boldsymbolσ$-model) and one model from the class of variational multiscale models (residual-based) within a finite element framework. The influence of these models on the estimation of clinically relevant biomarkers used to assess the degree of severity of the pathological condition (pressure difference, secondary flow degree, normalized flow displacement, wall shear stress) …
The significant rates of post-operative arterial thrombus formation following the sutured anastomosis (surgical connection) of vessels in microvascular reconstruction has kindled the development of engineered solutions such as the UNILINK coupler. These devices reduce thrombosis rates, which recent numerical studies suggest to be due to decreases in shear strain rate across the anastomosis site when compared to sutured vessels. In this work we develop and analytically solve the first mathematical model for the problem of microvascular anastomosis, leading to the discovery that the rates of thr…
With the goal of determining strategies to maximise drug delivery to a specific site in the body, we developed a mathematical model for the transport of drug nanocarriers (nanoparticles) in the bloodstream under the influence of an external magnetic field. Under the assumption of long (compared to the radius) blood vessels the Navier-Stokes equations are reduced, to a simpler model consistently with lubrication theory. Under these assumptions, analytical results are compared for Newtonian, power-law, Carreau and Ellis fluids, and these clearly demonstrate the importance of shear thinning effec…
Of concern in the paper is a generalized theoretical study of the non-Newtonian characteristics of peristaltic flow of blood through micro-vessels, e.g. arterioles. The vessel is considered to be of variable cross-section and blood to be a Herschel-Bulkley type of fluid. The progressive wave front of the peristaltic flow is supposed sinusoidal/straight section dominated (SSD) (expansion/contraction type); Reynolds number is considered to be small with reference to blood flow in the micro-circulatory system. The equations that govern the non-Newtonian peristaltic flow of blood are considered to…
Flowing blood displays a phenomenon called margination, in which leukocytes and platelets are preferentially found near blood vessel walls, while erythrocytes are depleted from these regions. Here margination is investigated using direct hydrodynamic simulations of a binary suspension of stiff (s) and floppy (f) capsules, as well as a stochastic model that incorporates the key particle transport mechanisms in suspensions -- wall-induced hydrodynamic migration and shear-induced pair collisions. The stochastic model allows the relative importance of these two mechanisms to be directly evaluated …
We report computational results of blood flow through a model of the human aortic arch and a vessel of actual diameter and length. On the top of the aortic arch the branching of the %%three arteries are included: the subclavian and jugular. A realistic pulsatile flow is used in all simulations. Calculations for bifurcation type vessels are also carried out and presented. Different mathematical methods for numerical solution of the fluid dynamics equations have been considered. The non-Newtonian behaviour of the human blood is investigated together with turbulence effects. A detailed time-depen…
Thrombosis is a common complication following the surgical implantation of blood contacting devices, and is strongly influenced by the phenomenon of near-wall enrichment of platelets. This paper describes a multi-constituent continuum approach to study this phenomenon. A mixture-theory model is used to describe the motion of the plasma and the red blood cells (RBCs) and the interactions between the two components. A transport model is developed to study the influence of the RBC field on the platelets. The model is used to study blood flow in a rectangular micro-channel, a sudden expansion micr…
