arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 1003.0171cond-mat.supr-con
收藏

低温合成Tc = 56.1K的SmO0 .8F0.2FeAs超导体

Low-temperature synthesis of SmO0.8F0.2FeAs superconductor with Tc = 56.1K

Chunlei Wang, Zhaoshun Gao, Lei Wang, Yanpeng Qi, Dongliang Wang, Chao Yao, Zhiyu Zhang, Yanwei Ma

摘要:

本文系统地研究了烧结温度对一步固相反应法制备的SmO_(0.8)F_(0.2)FeAs的结构和超导性能的影响。在每个批次的所有样品中发现了烧结温度、结构、起始转变温度(Tc)和临界电流密度(Jc)之间的详细相关性。最重要的是,在低温下烧结的样品清楚地显示出高Tc,例如在850 ℃下烧结的样品的Tc甚至高于53 K,并且在1000 ℃下制备的样品显示出迄今为止报道的最高Tc 56.1 K。此外,在1000 ℃烧结的样品也显示出最高的RRR和最低的电阻率(57 K),表明低杂质散射和增强的载流子密度。然而,在1100 ℃烧结的样品中,在5 K的自场下获得了10510 A/cm ^2的最大Jc。Tc对a轴晶格常数的依赖性表明,烧结温度对F对O的有效取代度有很大影响。该结果表明,与通常使用的约1200 ℃的温度相比,在约1000 ℃的温度下退火似乎更好地获得高质量的1111相氧氮族化合物。

英文摘要:

We report a systematic study on the effect of sintering temperature on the structural and superconducting properties of nominal SmO0.8F0.2FeAs fabricated by simple one-step solid state reaction method. A detailed correlation between the sintering temperature, structure, onset transition temperature (Tc) and critical current density (Jc) has been found in all samples of each batch. Most importantly, samples sintered at a low temperature clearly shows high Tc, for example the Tc of the samples sintered at 850C is even above 53 K, and the samples prepared at 1000C display the highest Tc of 56.1 K reported so far. Furthermore, the samples sintered at 1000C also show the highest RRR and the lowest resistivity(57K), indicating the low impurity scattering and enhanced carrier density. However, the maximum Jc of 10510 A/cm^2 at 5 K in self field was achieved in the samples sintered at 1100oC. The dependence of Tc on a-axis lattice constant indicates that the sintering temperature has strong influence on the effective substitution level of F for O. This result suggests that annealing at a temperature of ~1000C seems much better for obtaining high quality 1111 phase oxypnictides, compared to commonly used temperatures of around 1200C.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑