Electromagnetic properties of doped perovskites depend sensitively on the doping level. Both the superconducting transition temperature of Bi2Sr2Ca(Pr)Cu2O8+d compounds and the magnetic and electronic transport properties of La(Sr)Co(Fe)O3 perovskites change dramatically with the doping level. Apart from doping, oxygen deficiency is influenced by the details of preparation processes such as calcination and sintering. Simultaneous determination of constituents is of crucial importance from sample characterization point of view. Quantitative analysis of perovskite oxides can be performed by Secondary Neutral Mass Spectrometry (SNMS) which is a suitable technique to measure the chemical composition of almost any sample because the flux of atoms sputtered from the sample is representative of the stoichiometry of the top-most layers. The composition and oxygen content of Bi2Sr2Ca0.86Pr0.14Cu2O8.4 and La1-xSrxCo0.975Fe0.025O3-d, where 0<x<0.5, were determined by SNMS. The results show that the method is equally applicable for insulating and conducting compounds. The observed electromagnetic properties reflect well the compositions obtained experimentally.
Due to the photo-instability and hysteresis of TiO$_2$ electron transport layer (ETL) in perovskite solar cells (PSCs), novel electron transport materials are highly demanded. Here, we show ideal band alignment between La-doped BaSnO$_3$ (LBSO) and methyl ammonium (MA) lead iodide perovskite (MAPbI$_3$). The CH$_3$NH$_3$PbI$_3$/La$_x$Ba$_{(1-x)}$SnO$_3$ interface forms a stable all-perovskite heterostructure. The selective band alignment is manipulated with band gap renormalization by La-doping on the Ba site. LBSO shows high mobility, photo-stability, and structural stability, promising the n…
Nanocrystals based on metal-halide perovskites offer a promising material platform for highly efficient lighting. Using transient optical spectroscopy, we study excitation recombination dynamics in manganese-doped CsPb(Cl,Br)3 perovskite nanocrystals. We find an increase in the intrinsic excitonic radiative recombination rate upon doping, which is typically a challenging material property to tailor. Supported by ab initio calculations, we can attribute the enhanced emission rates to increased exciton localization through lattice periodicity breaking from Mn dopants, which increases exciton eff…
Fundamental and harmonic magneto-dielectricity studied for varied perovskite systems-- Pb0.98Gd0.02(Mg1/3Nb2/3)0.995O3 (A-site co-doped PGMN magneto-relaxor), La0.95Ca0.05CoO3 (A-site doped spin-state LCCO), and La2NiMnO6 (double-perovskite LNMO multiglass) characterize intricately polarized phases. First-harmonic signal (ε2') of magnetically co-doped PGMN manifests finite polarization P(H) below 270K, corroborated by the measured remnant P-E traces. Second-harmonic (ε3') reveals the effect of random E-fields causing electrical vitreousity, latter indicated by the divergent timescale of the fu…
Perovskite photovoltaics (PVs) have attracted attention because of their excellent power conversion efficiency (PCE). Critical issues related to large area PV performance, reliability and lifetime need to be addressed. Here, we show that doped metal oxides can provide ideal electron selectivity, improved reliability and stability for perovskite PVs. We report p-i-n perovskite PVs with device areas ranging from 0.09cm2 to 0.5cm2 incorporating a thick aluminum doped zinc oxide (AZO) electron selective contact with hysteresis-free PCE of over 13% and high fill factor values in the range of 80%. A…
We report two solid solutions based on magnetic ion doping of the double perovskite oxide Sr2GaSbO6: Sr2Ga1-xCrxSbO6 (0.1 < x < 0.4) and Sr2Ga1-xFexSbO6 (0.1 < x < 0.4). All compositions crystallize in the same space group (I4/m) as their undoped parent phase Sr2GaSbO6, with the trivalent magnetic cations Cr3+ or Fe3+ partially substituting for non-magnetic Ga3+ in one of the B-cation sites. The Cr- and Fe-doped phases display dominant antiferromagnetic coupling among the dopant magnetic moments, and exhibit decreasing band gaps with increasing substitution level.
In this paper we report studies on the correlation between the presence and distribution of cation vacancies in doped manganites (La,M)MnO3+delta (where M = Na, Ca) and their magnetic properties. Results indicate that cation vacancies are distributed differently for the different crystal structures and dopant ion type. In particular it is shown that knowledge of the total vacancies concentration alone is not enough to fully characterize the physical properties of manganites and that their distribution between the A and B sites of the perovskite structure plays a crucial role which should be ta…
Perovskite oxide based thin film gas sensors have long been considered as potential alternatives to commonly investigated binary metal oxides based sensors. BiFeO3, which is a prototype of p-type perovskite based semiconducting oxides, has recently drawn significant attention for its promising gas sensing characteristics. In the present work, the hydrogen sensing characteristics of calcium doped BiFeO3 has been reported by varying the film thickness, doping concentration, operating temperature, and test gas concentration. The films were deposited on glass substrates by sol-gel route using spin…
We have investigated the peculiar structure of charge and spin ordering in the half-doped layered perovskite oxide La$_{1.5}$Sr$_{0.5}$CoO$_4$ by elastic neutron scattering. Two samples with different preparation histories were studied. We find that the generic features of the ordered states, such as their short-range, glassy nature and the spin incommensurability, are sample-independent. At the same time, some subtle features of the ordered phases, such as the correlation lengths, differ.
Doping is a widely used method to tune physical properties of ferroelectric perovskites. Since doping can induce charges due to the substitution of certain elements, charge effects shall be considered in doped samples. To understand how charges can affect the system, we incorporate the dipole-charge interaction into our simulations, where the pinched hysteresis loops can well be reproduced. Two charge compensation models are proposed and numerically investigated to understand how lanthanum doping affect BaTiO$_{3}$'s ferroelectric phase transition temperature and hysteresis loop. The consequen…
Materials combining the optoelectronic functionalities of semiconductors with control of the spin degree of freedom are highly sought after for the advancement of quantum technology devices. Here, we report the paramagnetic Ruddlesden-Popper hybrid perovskite Mn:(PEA)2PbI4 (PEA = phenethylammonium) in which the interaction of isolated Mn2+ ions with magnetically brightened excitons leads to circularly polarized photoluminescence. Using a combination of superconducting quantum interference device (SQUID) magnetometry and magneto-optical experiments, we find that the Brillouin-shaped polarizatio…
While doping is widely used for tuning physical properties of perovskites in experiments, it remains a challenge to exactly know how doping achieves the desired effects. Here, we propose an empirical and computationally tractable model to understand the effects of doping with Fe-doped BaTiO$_{3}$ as an example. This model assumes that the lattice sites occupied by Fe ion and its nearest six neighbors lose their ability to polarize, giving rise to a small cluster of defective dipoles. Employing this model in Monte-Carlo simulations, many important features like reduced polarization and the conv…
Perovskite structured transition metal oxides are important technological materials for catalysis and solid oxide fuel cell applications. Their functionality often depends on oxygen diffusivity and mobility through complex oxide heterostructures, which can be significantly impacted by structural and chemical modifications, such as doping. Further, when utilized within electrochemical cells, interfacial reactions with other components (e.g. Ni- and Cr-based alloy electrodes and interconnects) can influence the perovskite's reactivity and ion transport, leading to complex dependencies that are d…
We demonstrate memory devices based on proton doping and re-distribution in perovskite nickelates (RNiO3, {R=Sm,Nd}) that undergo filling-controlled Mott transition. Switching speeds as high as 30 ns in two-terminal devices patterned by electron-beam lithography is observed. The state switching speed reported here are 300X greater than what has been noted with proton-driven resistance switching to date. The ionic-electronic correlated oxide memory devices also exhibit multi-state non-volatile switching. The results are of relevance to use of quantum materials in emerging memory and neuromorphi…
Recently, direct bandgap double perovskites are becoming more popular among photovoltaic research community owing to their potential to address issues of lead (Pb) toxicity and structural instability inherent in lead halide (simple) perovskites. In this study, In-Ag based direct bandgap double perovskite, Cs2AgInCl6 (CAIC), is treated with transition metal doping to improve the optoelectronic properties of the material. Investigations of structural and optoelectronic properties of Cu-doped CAIC, Cs2Ag(1-x)CuxInCl6, are done using ab-initio calculations with density functional theory (DFT) and …
Macroscopically, confined electron gases at polar oxide interfaces are rationalized within the simple "polar catastrophe" model. At the microscopic level, however, many other effects such as electric fields, structural distortions and quantum-mechanical interactions enter into play. Here we show how to bridge the gap between these two length scales, by combining the accuracy of first-principles methods with the conceptual simplicity of model Hamiltonian approaches. To demonstrate our strategy, we address the equilibrium distribution of the compensating free carriers at polar LaAlO3/SrTiO3 inte…
Inorganic-organic lead halide perovskites, particularly methylammonium lead halide (MAPbI$_3$) perovskite, is perceived to be a promising material for optoelectronics and spintronics. However, lead toxicity and instability under air and moisture restrict its practical uses. Hence, it is essential to reduce lead extent by substituting appropriate alternatives. Here, we substitute Sn and Ge in cubic MAPbI$_3$ and compare various properties of hybrid perovskites by employing state-of-the-art first-principles-based methodologies, viz., density functional theory (DFT) with semilocal and hybrid func…
Single crystals of electron-doped SrMnO3 with a cubic perovskite structure have been systematically investigated as the most canonical (orbital-degenerate) double-exchange system, whose ground states have been still theoretically controversial. With only 1-2% electron doping by Ce substitution for Sr, a G-type antiferromagnetic metal with a tiny spin canting in a cubic lattice shows up as the ground state, where the Jahn-Teller polarons with heavy mass are likely to form. Further electron doping above 4%, however, replaces this isotropic metal with an insulator with tetragonal lattice distorti…
We have investigated cobaltite relatives of the layered perovskite cuprates and nickelates, Pr$_{2-x}$Ca$_x$CoO$_4$ ($0.39 \leq x \leq 0.73$) and La$_{2-x}$Sr$_x$CoO$_4$ ($x = 0.61$), using elastic neutron scattering. We have discovered doping-dependent incommensurate short-range ordering of charges and magnetic moments, which in cobaltites occur in the range of heavy doping, $ 0.5 \lesssim x \lesssim 0.75$. The charge order exists already at room temperature and shows no change on cooling. The incommensurability of its propagation vector, ${\bf Q}_c = (ε_c,0,l)$, roughly scales with the conce…
This study is carried out using first principles density functional theory calculations within gpaw code. Atomic size effect is analyzed and investigated by doping either Li, Cs or both on Barium doped BiFeO$_3$ (BFO) which belongs to monoclinic $P2_1/m$ space group. The calculated results reveal that Cs doped BFO had significantly improved photocurrent density seemingly due to broadened absorption peaks and biplasmons generation. Co-doping two atoms with large size difference have a significant effect on plasmon width and peak than doping with a single and small sized atom. At higher photon e…
A unified theory is developed to explain various types of electronic collective behaviors in doped manganites R$_{1-x}$X$_x$MnO$_3$ (R = La, Pr,Nd etc. and X = Ca, Sr, Ba etc.). Starting from a realistic electronic model, we derive an effective Hamiltonianis by ultilizing the projection perturbation techniques and develop a spin-charge-orbital coherent state theory, in which the Jahn-Teller effect and the orbital degeneracy of e$_g$ electrons in Mn ions are taken into account. Physically, the experimentally observed charge ordering state and electronic phase separation are two macroscopic quan…
Metal-halide perovskite nanocrystals have demonstrated excellent optoelectronic properties for light-emitting applications. Isovalent doping with various metals (M2+) can be used to tailor and enhance their light emission. Although crucial to maximize performance, an understanding of the universal working mechanism for such doping is still missing. Here, we directly compare the optical properties of nanocrystals containing the most commonly employed dopants, fabricated under identical synthesis conditions. We show for the first time unambiguously and supported by first principles calculations …
La1-xSrxCo0.25Fe0.75O3-delta is known as one of the best cathode materials for permeation membranes and solid oxide fuel cells. Optimization of its chemical composition is a challenging problem. One of the key properties is concentration of oxygen vacancies, controlled by their formation energies. Ab initio calculations were employed in order to study the formation of oxygen vacancies in La1-xSrxCo0.25Fe0.75O3-delta perovskites by varying the Sr content from x = 12.5% to 50%. The formation energies were obtained for different stoichiometries as functions of temperature and oxygen partial press…
We explore mechanisms of orbital order decay in doped Mott insulators $R_{1-x}$(Sr,Ca)$_x$VO$_3$ ($R=\,$Pr,Y,La) caused by charged (Sr,Ca) defects. Our unrestricted Hartree-Fock analysis focuses on the combined effect of random, charged impurities and associated doped holes up to $x=0.5$. The study is based on a generalized multi-band Hubbard model for the relevant vanadium $t_{2g}$ electrons, and includes the long-range (i) Coulomb potentials of defects and (ii) electron-electron interactions. We show that the rotation of occupied $t_{2g}$ orbitals, induced by the electric field of defects, i…
We report a study of polycrystalline samples of the family La1-xCdxMnO3+dwith different percentage of Mn4+ ions. X-rays diffraction, Iodometric titration, Raman, Magnetic and Electrical Resistivity measurements provide a general characterisation of the physical properties. Results are qualitatively similar to the ones found in Ca doped manganese perovskites. Key words: Cd, manganese perovskites, magnetoresistance, Raman, magnetic, resistivity
Proximity to an orbital order with charge disorder state in optimally-doped \textit{RE}\textsubscript{5/8}Ca\textsubscript{3/8}MnO\textsubscript{3} perovskites
Temperature and Pressure Dependent Vibrational Properties of Pristine and Doped Vacancy-Ordered Double Perovskite
National Centre for High Pressure Studies, Department of Physical Sciences, Indian Institute of Science Education and Research Kolkata（印度科学教育研究所加尔各答分校物理科学系高压研究中心）；Indian Institute of Science Education and Research (IISER) Kolkata（印度科学教育研究所加尔各答分校）；Department of Chemical Sciences, and Centre for Advanced Functional Materials, Indian Institute of Science Education and Research (IISER) Kolkata（印度科学教育研究所加尔各答分校化学科学系及先进功能材料中心）
Magnetic refrigeration at room-temperature is a technology that could potentially be more environmentally-friendly, efficient and affordable than traditional refrigeration. The search for suitable materials for magnetocaloric refrigeration led to the study of double-perovskites La$_2$MnNiO$_6$, La$_2$MnCoO$_6$ and La$_2$MnFeO$_6$. While La$_2$MnNiO$_6$ and La$_2$MnCoO$_6$ are ferromagnets with near room-temperature $T_C$s, previous theoretical study of double-perovskite La$_2$MnFeO$_6$ revealed that this material is a ferrimagnet due to strong electronic interactions in Fe-$d$ orbitals. Here, …
The samples LaCoO3 with dilute substitutions on cobalt sites have been studied using the resistivity, thermopower and magnetic susceptibility measurements over the temperature range up to ~900 K. The Co-site substitution does not affect the magnetic transition at ~100 K and the onset of massive population of hole carriers at ~500 K, characteristic for undoped LaCoO3. On the other hand, the low-temperature transport and magnetism is markedly distinct for samples with extra charge on cobalt ions introduced by the heterovalent dopants (Mg2+, Ti4+) compared to samples with minor non-stoichiometry …
Low temperature solution combustion synthesis emerges as a facile method for synthesis of functional metal oxides thin films for electronic applications. We study the solution combustion synthesis process of Cu:NiOx using different molar ratios (w/o, 0.1 and 1.5) of fuel acetylacetone (Acac) to oxidizer (Cu, Ni Nitrates) as a function of thermal annealing tempera-tures 150, 200 and 300 oC. The solution combustion synthesis process, in both thin films and bulk Cu:NiOx, is investigated. Thermal analysis studies using TGA and DTA reveal that the Cu:NiOx thin films show a more gradual mass loss wh…
Two extreme members of the cobaltite series, LaCoO3 and DyCoO3, were investigated by the electrical resistivity and thermopower measurements up to 800-1000 K. Special attention was given to effects of extra holes or electrons, introduced by light doping of Co sites by Mg2+ or Ti4+ ions. The experiments on the La based compounds were complemented with magnetic measurements. The study shows that both kinds of charge carriers induce magnetic states on surrounding CoIII sites and form thus thermally stable polarons of large total spin. Their itinerancy is characterized by low temperature resistivi…
Role of Defects in the Paramagnetism of Fe-doped Cs$_{2}$AgBiBr$_{6}$ Double Perovskite
Julius-Maximilian University of Würzburg（维尔茨堡大学）；Institute for Scintillation Materials, National Academy of Sciences of Ukraine（乌克兰国家科学院闪烁材料研究所）；Paderborn University（帕德博恩大学）；Universidade Estadual de Campinas-UNICAMP（坎皮纳斯州立大学）
Site Preferences and "Coloring Problem" in Cu-doped BiMn$_7$O$_{12}$ Quadruple Perovskite
Michigan State University（密歇根州立大学）；The Rowland Institute at Harvard, Harvard University（哈佛大学罗兰研究所）；University of British Columbia（不列颠哥伦比亚大学）；University of Michigan（密歇根大学）
The effective mass is one of the main factors determining the Seebeck coefficient and electronic conductivity. Nb-doping increases the effective mass because of two reasons, lattice constants increase and electronic effects. In this ab-initio study the effective mass is estimated from the curvature of electronic bands and it could be clarified that the deformation of SrTiO3 crystals has a significant influence on bandgap and effective DOS and band mass, which are both in excellent agreement to experimental data. However, the electronic effect due to the e2g- band flattening near the Gamma-poin…
Dynamical stability and multifunctional properties of Ni2+/Pr3+ co-doped CsPbCl3 perovskite: insights from first-principles lattice dynamics and carrier transport
University of West Bohemia, New Technologies – Research Centre（西波希米亚大学，新技术研究中心）
In this work, layered perovskite SBN was investigated in a new doped form for hole as well as electron transport layer (HTL/ETL) in perovskite solar cells. This work was targeted to conclude the effect of tin doping in lanthanum-bismuth layer SBN on optical energy band gap besides dominant electron-hole transportation to assist in perovskite solar cell applications. Thoroughly hard ball-milled compositions Sr1-xSnxBi1.95La0.05Nb2O9 (x=0.0, 0.01, 0.03, 0.05, 0.1 and 0.2) were prepared by special microwave synthesis to obtain fine (~10-60nm) mesoporous particle network of atomic level substituti…
All-inorganic lead halide perovskite nanocrystals (NCs) show potential in optoelectronic devices, though their stability and efficiency have yet to improve. In this work, we explore the effect of bivalent metal site doping on the optoelectronic properties of CsPbX$_3$ (X = Br, Cl) perovskite NCs. First, the Pb$^{2+}$ ions in pristine CsPbBr$_3$ NC are partially substituted by Mn$^{2+}$ ions, and the alkaline earth metal strontium is then doped on both pristine and Mn$^{2+}$-substituted particles. The structural and photophysical properties of the pristine and the three doped NC variants have b…
Yb3+-doped inorganic metal-halide perovskites (Yb3+:CsPbX3, X = Cl, Br) have recently been discovered to display highly efficient quantum cutting, in which the energy from individual blue or UV photons absorbed by the material is re-emitted in the form of pairs of near-infrared photons by Yb3+ dopants. Experimental photoluminescence quantum yields approaching 200{%} have been reported. As the first quantum-cutting materials that combine such high photoluminescence quantum yields with strong, broadband absorption in the visible, these materials offer unique opportunities for enhancing the effic…
We introduce an effective model for $e_g$ electrons to describe three-dimensional perovskite (La$_{1-x}$Sr$_{x}$MnO$_3$ and La$_{1-x}$Ca$_{x}$MnO$_3$) manganites and study the magnetic and orbital order on $4\times 4\times 4$ cluster using correlated wave functions. The model includes the kinetic energy, and on-site Coulomb interactions for $e_g$ electrons, antiferromagnetic superexchange interaction between $S=3/2$ core spins, and the coupling between $e_g$ electrons and Jahn-Teller modes. The model reproduces the experimentally observed magnetic order: ($i$) $A$-type antiferromagnetic phase …
Zn doped Mn ferrites nanoparticles were fabricated by using Co-precipitation. Variation in structure, magnetic and optical properties of MnZn ferrites has been discussed. First of all, samples were synthesized, annealed at different temperatures and then characterized. The as-synthesized and annealed samples were investigated by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy Dispersive spectroscopy (EDX), Ultra Violet visible spectrometry (Uv-Vis spectrometry) and Vibrating sample magnetometer (VSM). The average crystallite size of MnZn ferrites nanoparticles determined fr…
We investigate the electronic, ferroelectric and magnetic properties of KTaO3/PbTiO3 interfaces by using conventional density functional theory (DFT) and advanced DFT such as hybrid functional HSE06. We show that doped holes in valence bands or electrons in conduction bands give rise to ferromagnetism at the interfaces. The ferromagnetic states are ground states for both hole-doped (p-type) and electron-doped (n-type) interfaces by comparison with their corresponding nonmagnetic and antiferromagnetic states. Carriers (holes or electrons) concentrate near the interface to screen the polarizatio…
Mixed-valent perovskite oxides based on BaBiO3 (BBO) are, like cuperates, well-known high-Tc superconductors. Recent ab inito calculations have assigned the high-Tc superconductivity to a correlation-enhanced electron--phonon coupling mechanism, stimulating the prediction and synthesis of new superconductor candidates among mixed-valent thallium perovskites. Existing superconductivity has meant that research has mainly focused on hole-doped compounds, leaving electron-doped compounds relatively unexplored. Here we demonstrate through ab inito calculations that BBO emerges as a topological insu…
Cui et al. describe the fabrication and characterization of planar pn-junction solar cells based on lead-halide perovskites. The doping densities measured using Hall effect measurements vary from $N_D = 10^{12} cm^{-3}$ to $8\times 10^{12} cm^{-3}$ for the solution-processed n-type layer and $N_A = 8\times 10^9 cm^{-3}$ for the evaporated p-type layer. While these devices outperform their counterparts, that are supposedly un-doped, the results raise three important questions: (i) Are the reported doping densities high enough to change the electrostatic potential distribution in the device from…
We report calculations of the electronic structure and optical properties of doped $n$-type perovskite BaSnO3 and layered perovskites. While doped BaSnO$_3$ retains its transparency for energies below the valence to conduction band onset, the doped layered compounds exhibit below band edge optical conductivity due to transitions from the lowest conduction band. This gives absorption in the visible for Ba2SnO4. Thus it is important to minimize this phase in transparent conducting oxide (TCO) films. Ba3Sn2O7 and Ba4Sn3O10 have strong transitions only in the red and infrared, respectively. Thus t…
We have prepared polycrystalline samples of (Sr$_{1-x}$La$_x$)$_2$ErRuO$_6$ and (Sr$_{1-x}$La$_x$)$_2$YRuO$_6$, and have measured the resistivity, Seebeck coefficient, thermal conductivity, susceptibility and x-ray absorption in order to evaluate the electronic states and thermoelectric properties of the doped double-perovskite ruthenates. We have observed a large Seebeck coefficient of -160 $μ$V/K and a low thermal conductivity of 7 mW/cmK for $x$=0.1 at 800 K in air. These two values are suitable for efficient oxide thermoelectrics, although the resistivity is still as high as 1 $Ω$cm. From …
Rapid and Highly Efficient Synergistic Sonophotocatalytic Degradation of Methyl Orange with CuDoped LaFeO3 Perovskite Nanoparticles
Cadi Ayyad University（卡迪·阿亚德国立大学）；University of Picardy Jules Verne（皮卡第儒勒·凡尔纳大学）；University of Lorraine, CNRS（洛林大学，法国国家科学研究中心）；University of Bordeaux（波尔多大学）；University Mohammed VI Polytechnic（穆罕默德六世理工大学）；Jožef Stefan Institute（约瑟夫·斯蒂芬研究所）
Low as well as high-temperature electron and x-ray diffraction studies have been carried out on a rare-earth free B-site disordered electron-doped manganite SrMn0.875.Mo0.125O3-δ in the temperature range of 83K to 637K. These studies reveal the occurrence of strong charge ordering (CO) at room temperature in a pseudo tetragonally distorted perovskite phase with space-group Pmmm. Non integral modulation vector of 8.95 times along [-110] indicates a charge density wave type modulation. The CO phase with basic perovskite structure Pmmm transforms to a charge disorder cubic phase through a first o…
A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study of PSCs, while CuSbS2 was utilized as the hole transport layer (HTL). wxAMPS was used to validate the results of SCAPS simulations. Moreover, the first-principle density function theory (DFT) calculations were performed for validating the 1.6 eV bandgap of the Cs2TiBr6 absorber. To enhance the device performance, we analyzed and optimized various parameters…
