We report the observation that thermoelectric thin-films of La-doped SrTiO3 grown on SrTiO3 substrates yield anomalously high values of thermopower to give extraordinary values of power factor at 300K. Thin-films of Sr0.98La0.02TiO3, grown via pulsed laser deposition at low temperature and low pressure (450C, 10-7Torr), do not yield similarly high values when grown on other substrates. The thin-film growth induces oxygen reduction in the SrTiO3 crystals, doping the substrate n-type. It is found that the backside resistance of the SrTiO3 substrates is as low (~12ohm/square) as it is on the film-side after film growth.
TiO$_2$ and SrTiO$_3$ are well known materials in the field of photocatalysis due to their exceptional electronic structure, high chemical stability, non-toxicity and low cost. However, owing to the wide band gap, these can be utilized only in the UV region. Thus, it's necessary to expand their optical response in visible region by reducing their band gap through doping with metals, nonmetals or the combination of different elements, while retaining intact the photocatalytic efficiency. We report here, the codoping of a metal and a nonmetal in anatase TiO$_2$ and SrTiO$_3$ for efficient photoc…
Surfaces of homoepitaxially grown TiO2-terminated SrTiO3(001) were studied in situ with scanning tunneling microscopy and spectroscopy. By controlling the Ti/Sr ratio, two-dimensional domains of highly ordered linear nanostructures, so-called "nanolines", are found to form on the surface. To further study how the surface structure affects the band structure, spectroscopic studies of these surfaces were performed. Our results reveal significantly more band bending for surfaces with the nanolines, indicative of an acceptor state associated with these features. Additionally, an in-gap state is ob…
We report on a systematic study of the growth of epitaxial TiO2 films deposited by pulsed laser deposition on Ti-terminated (001) SrTiO3 single crystals. By using in-situ reflection high energy electron diffraction, low energy electron diffraction, x-ray photoemission spectroscopy and scanning probe microscopy, we show that the stabilization of the anatase (001) phase is preceded by the growth of a pseudomorphic Sr-Ti-O intermediate layer, with a thickness between 2 and 4 nm. The data demonstrate that the formation of this phase is related to the activation of long range Sr migration from the …
We report the formation and observation of an electron liquid in Sr$_{2-x}$La$_{x}$TiO$_4$, the quasi-two-dimensional counterpart of SrTiO$_3$, through reactive molecular-beam epitaxy and {\it in situ} angle-resolved photoemission spectroscopy. The lowest lying states are found to be comprised of Ti 3$d_{xy}$ orbitals, analogous to the LaAlO$_3$/SrTiO$_3$ interface and exhibit unusually broad features characterized by quantized energy levels and a reduced Luttinger volume. Using model calculations, we explain these characteristics through an interplay of disorder and electron-phonon coupling a…
We have measured photoemission spectra of two kinds of TiO$_2$-capped VO$_2$ thin films, namely, that with rutile-type TiO$_2$ (r-TiO$_2$/VO$_2$) and that with amorphous TiO$_2$ (a-TiO$_2$/VO$_2$) capping layers. Below the Metal-insulator transition temperature of the VO$_2$ thin films, $\sim 300$ K, metallic states were not observed for the interfaces with TiO$_2$, in contrast with the interfaces between the band insulator SrTiO$_3$ and the Mott insulator LaTiO$_3$ in spite of the fact that both TiO$_2$ and SrTiO$_3$ are band insulators with $d^0$ electronic configurations and both VO$_2$ and…
In this Thesis, a study of the electronic structure of two Ti-based oxide systems, TiO2 thin films and the ultra-thin LaAlO3-SrTiO3 (LAO-STO) heterojunctions, is given. A weak room-temperature ferromagnetism (FM) has been detected in slightly reduced TiO2 thin film and in other oxides; as these materials are insulating closed-shell systems, this phenomenon has been classified as "d0 magnetism". Since this magnetism could be related to the growth process and to the presence of defects (oxygen vacancies, VO), an analysis of Ti electronic states (especially of Ti3+ energy levels) is mandatory. Th…
We show that reflection high-energy electron diffraction (RHEED) can be used as a highly sensitive tool to track surface and resulting film stoichiometry in adsorption-limited molecular beam epitaxy of (001) SrTiO3 thin films. Even under growth conditions that yield films with a lattice parameter that is identical to that of stoichiometric bulk crystals within the detection limit of high-resolution x-ray diffraction (XRD), changes in surface reconstruction occur from (1x1) to (2x1) to c(4x4) as the equivalent beam pressure of the Ti metalorganic source is increased. These surface reconstructio…
Satellites in core level spectra of photoelectron spectroscopy (PES) can provide crucial information on the electronic structure and chemical bonding in materials, particular in transition metal oxides. This paper explores satellites of the Ti 1$s$ and 2$p$ core level spectra of SrTiO$_3$ and TiO$_2$. Conventionally, soft x-ray PES (SXPS) probes the Ti 2$p$ core level; however, it is not ideal to fully capture satellite features due to its inherent spin-orbit-splitting (SOS). Here, hard x-ray PES(HAXPES) provides access to the Ti 1$s$ spectrum instead, which allows us to study intrinsic charge…
Surface photovoltage (SPV) spectroscopy, which is a versatile method to analyze the energetic distribution of electronic defect states at surfaces and interfaces of wide-bandgap semiconductor (hetero-)structures, is applied to comparatively investigate heterostructures made of 5-unit-cell-thick LaAlO$_3$ films grown either on TiO$_2$- or on SrO-terminated SrTiO$_3$. As shown in a number of experimental and theoretical investigations in the past, these two interfaces exhibit dramatically different properties with the first being conducting and the second insulating. Our present SPV investigatio…
LaAlO$_{3}$ and NdGaO$_{3}$ thin films of different thickness have been grown by pulsed laser deposition on TiO$_2$-terminated SrTiO$_{3}$ single crystals and investigated by soft X-ray photoemission spectroscopy. The surface sensitivity of the measurements has been tuned by varying photon energy $hν$ and emission angle $Θ$. In contrast to the core levels of the other elements, the Sr $3d$ line shows an unexpected splitting for higher surface sensitivity, signaling the presence of a second strontium component. From our quantitative analysis we conclude that during the growth process Sr atoms d…
We have investigated electron transport in Nb doped SrTiO$_3$ single crystals for two doping densities. We find that the resistivity and mobility are temperature dependent in both whereas the carrier concentration is almost temperature invariant. We rationalize this using the hydrogenic theory for shallow donors. Further, we probe electrical transport across Schottky interfaces of Au on TiO$_2$ terminated n-type SrTiO$_3$. Quantitative analysis of macroscopic I-V measurements reveal thermionic emission dominated transport for the low doped substrate whereas it deviates from such behavior for t…
We have investigated the dimensionality and origin of the magnetotransport properties of LaAlO3 films epitaxially grown on TiO2-terminated SrTiO3(001) substrates. High mobility conduction is observed at low deposition oxygen pressures (PO2 < 10^-5 mbar) and has a three-dimensional character. However, at higher PO2 the conduction is dramatically suppressed and nonmetallic behavior appears. Experimental data strongly support an interpretation of these properties based on the creation of oxygen vacancies in the SrTiO3 substrates during the growth of the LaAlO3 layer. When grown on SrTiO3 substrat…
Performing an analysis within density functional theory, we develop insight into the structural and electronic properties of the oxide heterostructure LaAlO3/SrTiO3. Electrostatic surface effects are decomposed from the internal lattice distortion in order to clarify their interplay. We first study the interface relaxation by a multi-layer system without surface, and the surface effects, separately, by a substrate-film system. While elongation of the TiO6 octahedra at the interface enhances the metallicity, reduction of the film thickness has the opposite effect due to a growing charge depleti…
The surface structure of SrTiO3(001) thin films homoepitaxially grown by PLD in step-flow mode was characterized using low temperature STM. It was found that one-dimensional (1D) TiOx-based nanostructures were formed on the thin film surface and their density increased with increasing thin film thickness. Most of the 1D nanostructures disappeared after a post-deposition annealing, indicating that this structure is metastable due to the nonequilibrium growth mode. The resulting surface after annealing exhibited similar features to that of a thinner film, having a domain structure with (2x1) and…
We present a comprehensive density-functional theory study addressing the adsorption, dissociation and successive diffusion of water molecules on the two regular terminations of SrTiO3(001). Combining the obtained supercell-geometry converged energetics within a first-principles thermodynamics framework we are able to reproduce the experimentally observed hydroxilation of the SrO-termination already at lowest background humidity, whereas the TiO2-termination stays free of water molecules in the regime of low water partial pressures. This different behavior is traced back to the effortless form…
By the first-principles electronic structure calculations, we have studied electronic structures of FeSe monolayer and bilayer thin films on SrTiO$_3$ (001) with SrO-termination or TiO$_2$ termination. We find that both FeSe monolayer and bilayer on either termination behave like a slightly doped semiconductor and a collinear antiferromagnetic order on Fe ions. There is no substantial charge transfer between the FeSe layers and the substrate. FeSe is adhered to the SrTiO$_3$ surface by a dipole-dipole interaction. The Fermi surface is mainly the contribution of Fe-3d orbitals. A valence band c…
The electronic and atomic structure of several $(1\times 1)$ terminations of the (110) polar orientation of SrTiO$_3$ surface are systematically studied by first-principles calculations. The electronic structure of the two stoichiometric SrTiO- and O$_2$-terminations are characterized by marked differences with respect to the bulk, as a consequence of the polarity compensation. In the former, the Fermi level is located at the bottom of the conduction band, while in the latter the formation of a peroxo bond between the two surface oxygens results in a small-gap insulating surface with states in…
Elastic softening in the paraelastic phases of Ba$_{1-x}$Sr$_{x}$TiO$_{3}$ is largest near the transition temperatures and decreases on heating smoothly over extended temperature ranges. Softening extends to the highest measured temperature(850~K) for Ba-rich compounds. The temperature evolution of the excess compliance of the precursor softening follows a power law $δS\propto |T-T_{\mathrm{C}}|^{-κ}$\ with a characteristic exponent $κ$\ ranging between 1.5 in SrTiO$_{3}$\ and 0.2 in BaTiO$_{3}$. The latter value is below the estimated lower bounds of displacive systems with three orthogonal s…
Transition metal oxides are considered promising thermoelectric materials for harvesting high-temperature waste heat due to their stability, abundance and low toxicity. Despite their typically strong ionic character, they can exhibit surprisingly high power factors $σS^2$, as in n-type SrTiO$_3$ for instance. Thus, it is worth examining other transition metal oxides that might surpass the performances of SrTiO$_3$. This theoretical paper investigates the thermoelectric properties of n-type rutile TiO$_2$, which is the most stable phase of titanium oxide up to 2000 K. The electronic structure i…
Thin film synthesis methods developed over the past decades have unlocked emergent interface properties ranging from conductivity to ferroelectricity. However, our attempts to exercise precise control over interfaces are constrained by a limited understanding of growth pathways and kinetics. Here we demonstrate that shuttered molecular beam epitaxy induces rearrangements of atomic planes at a polar / non-polar junction of LaFeO$_3$ (LFO) / $n$-SrTiO$_3$ (STO) depending on the substrate termination. Surface characterization confirms that substrates with two different (TiO$_2$ and SrO) terminati…
The surface termination of (100)-oriented LaAlO3 (LAO) single crystals was examined by atomic force microscopy and optimized to produce a single-terminated atomically flat surface by annealing. Then the atomically flat STO film was achieved on a single-terminated LAO substrate, which is expected to be similar to the n-type interface of two-dimensional electron gas (2DEG), i.e., (LaO)-(TiO2). Particularly, that can serve as a mirror structure for the typical 2DEG heterostructure to further clarify the origin of 2DEG. This newly developed interface was determined to be highly insulating. Additio…
We studied strain-induced polarization and resulting conductivity in the nonpolar/nonpolar CaZrO3/SrTiO3 (CZO/STO) heterostructure (HS) system by means of first-principles electronic structure calculations. By modeling four types of CZO/STO HS-based slab systems, i.e., TiO2/CaO and SrO/ZrO2 interface models with CaO and ZrO2 surface terminations in each model separately, we found that the lattice-mismatch-induced compressive strain leads to a strong polarization in the CZO film, and as the CZO film thickness increases, there exist an insulator-to-metal transition. The polarization direction an…
X-ray diffraction studies showed that the structure of (Sr$_{1-x}$Pr$_x$)TiO$_3$ solid solutions at 300 K changes from the cubic $Pm3m$ to the tetragonal $I4/mcm$ with increasing $x$. The analysis of XANES and EXAFS spectra of the solid solutions revealed that Pr ions are predominantly in the 3+ oxidation state, they substitute for Sr atoms and are on-center regardless of the preparation conditions. The weak dependence of the lattice parameter in (Sr$_{1-x}$Pr$_x$)TiO$_3$ on the Pr concentration was explained by the competition between the relaxation of the Sr--O bond length, which results fro…
The Ruddlesden-Popper (RP) homologous series Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ provides a useful template for the study and control of the effects of dimensionality and quantum confinement on the excited state properties of the complex oxide SrTiO$_3$. We use ab initio many-body perturbation theory within the $GW$ approximation and the Bethe-Salpeter equation approach to calculate quasiparticle energies and absorption spectrum of Sr$_{n+1}$Ti$_{n}$O$_{3n+1}$ for $n=1-5$ and $\infty$. Our computed direct and indirect optical gaps are in excellent agreement with spectroscopic measurements. The calcul…
Stoichiometric, epitaxial LaCrO3 films have been grown on TiO2-terminated SrTiO3(001) substrates by molecular beam epitaxy using O2 as the oxidant. Film growth occurred in a layer-by-layer fashion, giving rise to structurally excellent films and surfaces which preserve the step-terrace structure of the substrate. The critical thickness is in excess of 500 Å. Near-surface Cr(III) is highly susceptible to further oxidation to Cr(V), leading to the formation of a disordered phase upon exposure to atomic oxygen. Recovery of the original epitaxial LaCrO3 phase is readily achieved by vacuum annealin…
Titanium dioxide has been extensively studied in recent decades for its important photocatalytic application in environmental purification. The search for a method to narrow the optical band-gap of TiO2 plays a key role for enhancing its photocatalytic application. The optical band gap of epitaxial rutile and anatase TiO2 thin films deposited by helicon magnetron sputtering on sapphire and on SrTiO3 substrates was correlated to the lattice constants estimated from HRTEM images and SAED. The optical band-gap of 3.03 eV for bulk-rutile increased for the thin films to 3.37 on sapphire. The band g…
Polarized neutron reflectometry measurements are presented exploring the evolution of ferrimagnetism in GdTiO$_3$ films as they are confined between SrTiO$_3$ layers of variable thicknesses. As GdTiO$_3$ films approach the thin layer limit and are confined within a substantially thicker SrTiO$_3$ matrix, the TiO$_6$ octahedral tilts endemic to GdTiO$_3$ coherently relax toward the undistorted, cubic phase of SrTiO$_3$. Our measurements reveal that the ferrimagnetic state within the GdTiO$_3$ layers survives as the TiO$_6$ octahedral tilts in the GdTiO$_3$ layers are suppressed. Furthermore, ou…
We report the enthalpy of oxygen vacancy formation in thin films of electron-doped SrTiO$_{3}$, under different degrees of epitaxial stress. We demonstrate that both compressive and tensile strain decrease this energy at a very similar rate, and promote the formation of stable doubly ionized oxygen vacancies. Moreover, we also show that unintentional cationic vacancies introduced under typical growth conditions, produce a characteristic rotation pattern of TiO$_6$ octahedra. The local concentration of oxygen vacancies can be modulated by an electric field with an AFM tip, changing not only the…
XAFS studies of Ni-doped Ba$_{1-x}$Sr$_x$TiO$_3$ solid solution reveal that the Ni oxidation state changes from 4 in SrTiO$_3$ to 2.5 in BaTiO$_3$ when varying $x$. This change is accompanied by a noticeable change in the interatomic Ni-O distances in the first shell. The first-principles calculations show that nickel creates an impurity band in the forbidden band gap of BaTiO$_3$ and SrTiO$_3$, which explains the appearance of intense absorption of Ni-doped samples in the visible region. The analysis of the electronic structure of doped crystals and calculations of the oxygen vacancy formatio…
Rare-earth ions (REI) have emerged as an attractive candidate for solid-state qubits, particularly as a quantum memory. Their 4f-4f transitions are shielded by filled 5s and 5p orbitals, offering a degree of protection from external electric fields. Embedded within a thin film oxide host, REIs could enable a qubit platform with significant memory capabilities. Furthermore, a silicon-compatible thin film form factor would enable the use of standard semiconductor fabrication processes to achieve chip-based integrability and scalability for functional quantum networks. Towards this goal, we have …
We have investigated the properties of interfaces between LaAlO3 films grown on SrTiO3 substrates singly terminated by TiO2. We used RF sputtering in a high-pressure oxygen atmosphere. The films are smooth, with flat surfaces. Transmission Electron Microscopy shows atomically sharp and continuous interfaces while EELS measurements show some slight intermixing. The elemental ratio of La to Al measured by EDX is found to be 1.07. Importantly, we find these interfaces to be non-conducting, indicating that the sputtered interface is not electronically reconstructed in the way reported for films gr…
We report the effect of oxygen pressure during growth ($P_{O_{2}}$) on the electronic and magnetic properties of PrAlO$_3$ films grown on $\rm TiO_{2}$-terminated SrTiO$_3$ substrates. Resistivity measurements show an increase in the sheet resistance as $P_{O_{2}}$ is increased. The temperature dependence of the sheet resistance at low temperatures is consistent with Kondo theory for $P_{O_{2}} \ge 10^{-5}$ torr. Hall effect data exhibit a complex temperature dependence that suggests a compensated carrier density. We observe behavior consistent with two different types of carriers at interface…
We have made very thin films of LaAlO3 on TiO2 terminated SrTiO3 and have measured the properties of the resulting interface in various ways. Transport measurements show a maximum sheet carrier density of 1016 cm-2 and a mobility around 104 cm2 V-1 s-1. In situ ultraviolet photoelectron spectroscopy (UPS) indicates that for these samples a finite density of states exists at the Fermi level. From the oxygen pressure dependence measured in both transport as well as the UPS, we detail, as reported previously by us, that oxygen vacancies play an important role in the creation of the charge carrier…
Control of thin film stoichiometry is of primary relevance to achieve desired functionality. Pulsed laser deposition ablating from binary-oxide targets (sequential deposition) can be applied to precisely control the film composition, offsetting the importance of growth conditions on the film stoichiometry. In this work, we demonstrate that the cation stoichiometry of SrTiO$_3$ thin films can be finely tuned by sequential deposition from SrO and TiO$_2$ targets. Homoepitaxial SrTiO$_3$ films were deposited at different substrate temperatures and Ti/Sr pulse ratios, allowing the establishment of…
The effective mass is one of the main factors for enlarging the Seebeck coefficient and electronic conductivity of SrTiO3-based thermoelectric materials [1,2]. The goal of this paper is to clarify, how superlattices can change the effective mass and other features of the bandstructure. The natural Ruddlesden-Popper phase (SrTiO3)n(SrO)m with n=2, m=1 the situation changes, because the TiO6-octahedrons are slightly extended, due to diluted density of the SrO layer. Another effect is the deformed electron density, which leads to reduced effective mass perpendicular to the layer, but enlarged par…
We present theoretically the electronic structure of antiferromagnetic (AFM) FeSe monolayer on TiO$_{2}$ terminated SrTiO$_{3}$(001) surface. It is revealed that the striking disappearance of the Fermi surface around the Brillouin zone (BZ) center can be well explained by the antiferromatnetic (AFM) phase. We show that the system has a considerable charge transfer from SrTiO$_{3}$(001) substrate to FeSe monolayer, and so has a self-constructed electric field. The FeSe monolayer band structure near the BZ center is sensitive to charge doping, and the spin-resolved energy bands at BZ corner are …
We show that electron-phonon coupling can induce strong electron pairing in an FeSe monolayer on a SrTiO3 substrate (experimental indications for superconducting Tc are between 65 and 109K). The role of the SrTiO3 substrate in increasing the coupling is two-fold. First, the interaction of the FeSe and TiO2 terminated face of SrTiO3 prevents the FeSe monolayer from undergoing a shear-type (orthorhombic, nematic) structural phase transition. Second, the substrate allows an anti-ferromagnetic ground state of FeSe which opens electron-phonon coupling channels within the monolayer that are prevente…
The ability to control materials properties through interface engineering is demonstrated by the appearance of conductivity at the interface of certain insulators, most famously the {001} interface of the band insulators LaAlO$_{3}$ and TiO$_{2}$-terminated SrTiO$_{3}$ (STO). Transport and other measurements in this system show a plethora of diverse physical phenomena. To better understand the interface conductivity, we used scanning superconducting quantum interference device microscopy to image the magnetic field locally generated by current in an interface. At low temperature, we found that…
We report that epitaxial Sr2IrO4 thin-films can be selectively grown using pulsed laser deposition (PLD). Due to the competition between the Ruddlesden-Popper phases of strontium iridates (Sr_{n+1}Ir_{n}O_{3n+1}), conventional PLD methods often result in mixed phases of Sr2IrO4 (n = 1), Sr3Ir2O7 (n = 2), and SrIrO3 (n = infinity). We have discovered that reduced PLD plume dimensions and slow deposition rates are the key for stabilizing pure Sr2IrO4 phase thin-films, identified by real-time in-situ monitoring of their optical spectra. The slow film deposition results in a thermodynamically stab…
Hybrid oxide molecular beam epitaxy (hMBE), a thin-film deposition technique in which transition metal cations are delivered using a metal-organic precursor, has emerged as the state-of-the-art approach to the synthesis of electronic-grade complex oxide films with a stoichiometric growth window. However, numerous questions remain regarding the chemical mechanisms of the growth process and the surface properties of the resulting films. To examine these properties, thin film SrTiO$_{3}$ (STO) was prepared by hMBE using a titanium tetraisopropoxide (TTIP) precursor for Ti delivery and an elementa…
The origin of the two-dimensional electron gas (2DEG) in the interface between $γ$-Al$_2$O$_3$ (GAO) and SrTiO$_3$ (STO) (GAO/STO) as well as the reason for the high mobility of the 2DEG is still in debate. In this paper, the electronic structures of [001]-oriented GAO/STO heterostructures with and without oxygen vacancies are investigated by first-principle calculations based on the density functional theory. The calculation results show that the necessary condition for the formation of 2DEG is that the GAO/STO heterostructure has the interface composed of Al and TiO$_2$ layers. For the heter…
We have investigated ten standard single crystal substrates of complex oxides on the account of their applicability in the Raman spectroscopy based thin film research. In this study we suggest a spectra normalization procedure that utilizes a comparison of the substrate Raman spectra to those of well-established Raman reference materials. We demonstrate that MgO, LaGaO3, (LaAlO3)_0.3(Sr2AlTaO6)_0.7 (LSAT), DyScO3, YAlO3, and LaAlO3 can be of potential use for a Raman based thin film research. At the same time TiO2 (rutile), NdGaO3, SrLaAlO4, and SrTiO3 single crystals exhibit multiple phonon m…
Lattice structure can dictate electronic and magnetic properties of a material. Especially, reconstruction at a surface or heterointerface can create properties that are fundamentally different from those of the corresponding bulk material. We have investigated the lattice structure on the surface and in the thin films of epitaxial SrRuO3 with the film thickness up to 22 pseudo-cubic unit cells (u.c.), using the combination of surface sensitive low energy electron diffraction and bulk sensitive scanning transmission electron microscopy. Our analysis indicates that, in contrast to many perovski…
The growth of SrRuO$_3$ (SRO) thin film with high-crystallinity and low residual resistivity (RR) is essential to explore its intrinsic properties. Here, utilizing the adsorption-controlled growth technique, the growth condition of initial SrO layer on TiO$_2$-terminated SrTiO$_3$ (STO) (001) substrate was found to be crucial for achieving a low RR in the resulting SRO film grown afterward. The optimized initial SrO layer shows a $c$(2 x 2) superstructure that was characterized by electron diffraction, and a series of SRO films with different thicknesses ($t$s) were then grown. The resulting S…
Anatase Ti0.96Co0.04O2 films were grown epitaxially on SrTiO3 (001) substrates by using plused laser deposition with in-situ reflection high-energy electron diffraction. The oxygen partial pressure, PO2, during the growth was systematically varied. As PO2 decreased, the growth behavior was changed from a 2-dimensional layer-by-layer-like growth to a 3-dimensional island-like one, which resulted in an increase in the saturation magnetization. These structural and magnetic changes were explained in terms of the formation of cobalt clusters whose existence was proved by transmission-electron-micr…
The spin-orbit coupling and electron correlation in perovskite SrIrO3 (SIO) strongly favor new quantum states and make SIO very attractive for next generation quantum information technology. In addition, the small electronic band-width offers the possibility to manipulate anisotropic electronic transport by strain. However, twinned film growth of SIO often masks electronic anisotropy which could be very useful for device applications. We demonstrate that the twinning of SIO films on (001) oriented SrTiO3 (STO) substrates can be strongly reduced for thin films with thickness t less than 30 nm b…
