The temperature dependence of the Casimir force between a real metallic plate and a metallic sphere is analyzed on the basis of optical data concerning the dispersion relation of metals such as gold and copper. Realistic permittivities imply, together with basic thermodynamic considerations, that the transverse electric zero mode does not contribute. This results in observable differences with the conventional prediction, which does not take this physical requirement into account. The results are shown to be consistent with the third law of thermodynamics, as well as being consistent with current experiments. However, the predicted temperature dependence should be detectable in future experiments. The inadequacies of approaches based on {\it ad hoc} assumptions, such as the plasma dispersion relation and the use of surface impedance without transverse momentum dependence, are discussed.
There has been recent criticism of our approach to the Casimir force between real metallic surfaces at finite temperature, saying it is in conflict with the third law of thermodynamics and in contradiction with experiment. We show that these claims are unwarranted, and that our approach has strong theoretical support, while the experimental situation is still unclear.
We study the spatial properties of the Casimir friction phenomenon for an atom moving at a non-relativistic constant velocity parallel to a planar graphene sheet. The coupling of the atom to the vacuum electromagnetic (EM) field is implemented by an electric dipole term, plus a Röntgen term. We study the fermion pair production, evaluating the angular dependence of the fermion emission probability. The phenomenon exhibits a threshold: it only exists when the speed of the sliding motion is larger than the Fermi velocity of the medium.
The problem of calculating the Casimir force on two conducting planes by means of the stress tensor is examined. The evaluation of this quantity is carried out using an explicit regularization procedure which has its origin in the underlying (2+1) dimensional Poincaré invariance of the system. The force between the planes is found to depend on the ratio of two independent cutoff parameters, thereby rendering any prediction for the Casimir effect an explicit function of the particular calculational scheme employed. Similar results are shown to obtain in the case of the conducting sphere.
The Casimir force between two conducting planes is considered in both the electromagnetic and scalar field cases. This is done by the usual summation over energy eigenmodes of the system as well as by a calculation of the stress tensor in the region between the planes. The latter case requires that careful attention be given to singular operator products, an issue which is accommodated here by invoking the point separation method in conjunction with a scalar cutoff. This is shown to yield cutoff dependent and divergent contributions to the Casimir pressure which are dependent on the separation…
We consider the Casimir effect of a massive vector field between two semi-infinite dielectric slabs. We first derive the generalization of the Lifshitz formula that gives the Casimir interaction energy of two magnetodielectric slabs separated by a magnetodielectric medium due to the vacuum fluctuations of a massive vector field. We then discuss the asymptotic behaviors of the Casimir energy and the Casimir force in various limits, such as low temperature, high temperature, small mass, large mass, up to the first order in the finite conductivity correction, for two real metal semispaces whose d…
We have analyzed available optical data for Au in the mid-infrared range which is important for a precise prediction of the Casimir force. Significant variation of the data demonstrates genuine sample dependence of the dielectric function. We demonstrate that the Casimir force is largely determined by the material properties in the low frequency domain and argue that therefore the precise values of the Drude parameters are crucial for an accurate evaluation of the force. These parameters can be estimated by two different methods, either by fitting real and imaginary parts of the dielectric fun…
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
We consider polarizable sheets modeled by a lattice of delta function potentials. The Casimir interaction of two such lattices is calculated at nonzero temperature. The heat kernel expansion for periodic singular background is discussed in relation with the high temperature asymptote of the free energy.
The finite temperature Casimir effect for a scalar field in the bulk region of the two Randall-Sundrum models, RSI and RSII, is studied. We calculate the Casimir energy and the Casimir force for two parallel plates with separation $a$ on the visible brane in the RSI model. High-temperature and low-temperature cases are covered. Attractiveness versus repulsiveness of the temperature correction to the force is discussed in the typical special cases of Dirichlet-Dirichlet, Neumann-Neumann, and Dirichlet-Neumann boundary conditions at low temperature. The Abel-Plana summation formula is made use o…
We study the finite temperature Casimir interaction between a cylinder and a plate using the exact formula derived from the Matsubara representation and the functional determinant representation. We consider the scalar field with Dirichlet and Neumann boundary conditions. The asymptotic expansions of the Casimir energy and the Casimir force when the separation $a$ between the cylinder and the plate is small are derived. As in the zero temperature case, it is found that the leading terms of the Casimir energy and the Casimir force agree with those derived from the proximity force approximation …
We find the lateral projection of the Casimir force for a configuration of a sphere above a corrugated plate. This force tends to change the sphere position in the direction of a nearest corrugation maximum. The probability distribution describing different positions of a sphere above a corrugated plate is suggested which is fitted well with experimental data demonstrating the nontrivial boundary dependence of the Casimir force.
We evaluate the difference between the Casimir free energies corresponding to either grounded or isolated perfect conductors, at high temperatures. We show that a general and simple expression for that difference can be given, in terms of the electrostatic capacitance matrix for the system of conductors. For the case of close conductors, we provide approximate expressions for that difference, by evaluating the capacitance matrix using the proximity force approximation. Since the high-temperature limit for the Casimir free energy for a medium described by a frequency-dependent conductivity dive…
The normal and tangential Casimir force for the rack gear is calculated numerically in the case of ideal boundary conditions for the electromagnetic field - perfect reflection on the boundaries. The resulting tangential force appears to be essentially shape dependent. Relatively small shape variations lead to the essential changes in tangential force, whereas normal force remains almost unchanged.
We discuss corrections to the Casimir effect at finite temperature and effective field theory. Recently, it has been shown that effective field theories can reproduce radiative corrections to the Casimir energy calculated in full QED. We apply effective field theory methods at finite temperature and reproduce the Casimir free energy. We show that the system undergoes dimensional reduction at high temperature and that it can be described by an effective three-dimensional field theory.
We study the geometry dependence of the Casimir energy for deformed metal plates by a path integral quantization of the electromagnetic field. For the first time, we give a complete analytical result for the deformation induced change in Casimir energy δ\cal E in an experimentally testable, nontrivial geometry, consisting of a flat and a corrugated plate. Our results show an interesting crossover for δ\cal E as a function of the ratio of the mean plate distance H, to the corrugation length λ: For λ\ll H we find a {\em slower} decay \sim H^{-4}, compared to the H^{-5} behavior predicted by the …
The Casimir energy, free energy and Casimir force are evaluated, at arbitrary finite temperature, for a dilute dielectric ball with uniform velocity of light inside the ball and in the surrounding medium. In particular, we investigate the classical limit at high temperature. The Casimir force found is repulsive, as in previous calculations.
Casimir interactions between macroscopic objects are strongly influenced by their geometrical features as shape and orientation as well as by their material properties. The effect of geometry is commonly obtained from the proximity approximation (PA). Here we present a path integral quantization for the electromagnetic field in the presence of deformed metallic surfaces. From the resulting effective action the Casimir force between the surfaces can be calculated without the PA. For corrugated surfaces the force is obtained both perturbatively for small deformations and by a numerical approach …
In this paper, dedicated to the career of Tom Erber, we consider the Casimir interaction between weakly coupled bodies at nonzero temperature. For the case of semitransparent bodies, that is, ones described by delta-function potentials, we first examine the interaction between an infinite plane and an arbitrary curved surface. In weak coupling, such an interaction energy coincides with the exact form of the proximity force approximation obtained by summing the interaction between opposite surface elements at arbitrary temperature. This result generalizes a theorem proved recently by Decca et a…
Finite temperature Casimir theory of the Dirichlet scalar field is developed, assuming that there is a conventional Casimir setup in physical space with two infinitely large plates separated by a gap R and in addition an arbitrary number q of extra compacified dimensions. As a generalization of earlier theory, we assume in the first part of the paper that there is a scalar 'refractive index' N filling the whole of the physical space region. After presenting general expressions for free energy and Casimir forces we focus on the low temperature case, as this is of main physical interest both for…
The finite temperature Casimir free energy is calculated for a dielectric ball of radius $a$ embedded in an infinite medium. The condition $εμ=1$ is assumed for the inside/outside regions. Both the Green function method and the mode summation method are considered, and found to be equivalent. For a dilute medium we find, assuming a simple "square" dispersion relation with an abrupt cutoff at imaginary frequency $\hat ω= ω_0$, the high temperature Casimir free energy to be negative and proportional to $x_0 \equiv ω_0 a$. Also, a physically more realistic dispersion relation involving spatial di…
The Casimir pressure is calculated between parallel metal plates, containing the materials Au, Cu, or Al. Our motivation for making this calculation is the need of comparing theoretical predictions, based on the Lifshitz formula, with experiments that are becoming gradually more accurate. In particular, the finite temperature correction is considered, in view of the recent discussion in the literature on this point. A special attention is given to the case where the difference between the Casimir pressures at two different temperatures, T=300 K and T=350 K, is involved. This seems to be a case…
In view of the increasing accuracy of Casimir experiments, there is a need for performing accurate theoretical calculations. Using accurate experimental data for the permittivities we present, via the Lifshitz formula applied to the standard Casimir setup with two parallel plates, accurate theoretical results in case of the metals Au, Cu and Al. Both similar and dissimilar cases are considered. Concentrating in particular on the finite temperature effect, we show how the Casimir pressure varies with separation for three different temperatures, T={1, 300, 350}K. The metal surfaces are taken to …
We consider the finite temperature Casimir effect between two concentric spheres due to the vacuum fluctuations of the electromagnetic field in the $(D+1)$-dimensional Minkowski spacetime. Different combinations of perfectly conducting and infinitely permeable boundary conditions are imposed on the spheres. The asymptotic expansions of the Casimir free energies when the dimensionless parameter $\vep$, the ratio of the distance between the spheres to the radius of the smaller sphere, is small are derived in both the high temperature region and the low temperature region. It is shown that the le…
We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2πnaT$, $a$ being the …
We calculate the dependence of the Casimir force on the isotopic composition of the interacting objects. This dependence arises from the subtle influence of the nuclear masses on the electronic properties of the bodies. We discuss the relevance of these results to current experiments utilizing the iso-electronic effect to search at very short separations for new weak forces suggested by various unification theories.
The Casimir effect between metal surfaces has now been well-verified at the few-percent level experimentally. However, the temperature dependence has never been observed in the laboratory, since all experiments are conducted at room temperature. The temperature dependence for the related Casimir-Polder force between an atom and a bulk material has, in contrast, been observed between a BEC and a silica substrate, with the environment and the silica held at different temperatures. There is a controversy about the temperature dependence for the force between metals, having to do with the magnitud…
We calculate the low temperature corrections to the free energy for a sphere in front of a plane. First, the scalar field obeying Dirichet or Neumann boundary conditions is considered. Second, the electromagnetic field is studied, the sphere being perfectly conducting and being a dielectric ball with both, constant permittivity and permittivity of the plasma model.
We calculate the Casimir force and free energy for plane metallic mirrors at non-zero temperature. Numerical evaluations are given with temperature and conductivity effects treated simultaneously. The results are compared with the approximation where both effects are treated independently and the corrections simply multiplied. The deviation between the exact and approximated results takes the form of a temperature dependent function for which an analytical expression is given. The knowledge of this function allows simple and accurate estimations at the % level.
Theory of the Casimir effect for a flat graphene layer interacting with a parallel flat material is presented in detail. The high-temperature asymptotics of a free energy in a graphene-metal system coincides with a Drude high-temperature asymptotics of the metal-metal system. High-temperature behavior in the graphene-metal system is expected at separations of the order of 100 nm at temperature T=300K.
Repulsion, induced from quantum vacuum fluctuations, for an anisotropically polarizable atom on the symmetry axis of an anisotropically polarizable annular disc is studied. There exists two torsion free points on each side of the annular disc, where the interaction energy is orientation independent. The position of second of the two torsion free points, on either side of the disc, is shown to determine the orientation dependence of the atom at distances far from the plate, revealing a geometrical dependence. In the ring limit of the annular disc, new repulsion emerges.
The Casimir force and free energy at low temperatures has been the subject of focus for some time. We calculate the temperature correction to the Casimir-Lifshitz free energy between two parallel plates made of dielectric material possessing a constant conductivity at low temperatures, described through a Drude-type dielectric function. For the transverse magnetic (TM) mode such a calculation is new. A further calculation for the case of the TE mode is thereafter presented which extends and generalizes previous work for metals. A numerical study is undertaken to verify the correctness of the a…
We provide further evidence for the nontrivial interplay between geometry and temperature in the Casimir effect. We investigate the temperature dependence of the Casimir force between an inclined semi-infinite plate above an infinite plate in D dimensions using the worldline formalism. Whereas the high-temperature behavior is always found to be linear in T in accordance with dimensional-reduction arguments, different power-law behaviors at small temperatures emerge. Unlike the case of infinite parallel plates, which shows the well-known T^D behavior of the force, we find a T^{D-1} behavior for…
Recently, Brevik et al. [Phys. Rev. E 71, 056101 (2005)] adduced arguments against the traditional approach to the thermal Casimir force between real metals and in favor of one of the alternative approaches. The latter assumes zero contribution from the transverse electric mode at zero frequency in qualitative disagreement with unity as given by the thermal quantum field theory for ideal metals. Those authors claim that their approach is consistent with experiments as well as with thermodynamics. We demonstrate that these conclusions are incorrect. We show specifically that their results are c…
A widely used method for estimating Casimir interactions [H. B. G. Casimir, Proc. K. Ned. Akad. Wet. 51, 793 (1948)] between gently curved material surfaces at short distances is the proximity force approximation (PFA). While this approximation is asymptotically exact at vanishing separations, quantifying corrections to PFA has been notoriously difficult. Here we use a derivative expansion to compute the leading curvature correction to PFA for metals (gold) and insulators (SiO$_2$) at room temperature. We derive an explicit expression for the amplitude $\hatθ_1$ of the PFA correction to the fo…
The geometry dependence of Casimir forces is significantly more pronounced in the presence of thermal fluctuations due to a generic geometry-temperature interplay. We show that the thermal force for standard sphere-plate or cylinder-plate geometries develops a non-monotonic behavior already in the simple case of a fluctuating Dirichlet scalar. In particular, the attractive thermal force can increase for increasing distances below a critical temperature. This anomalous behavior is triggered by a reweighting of relevant fluctuations on the scale of the thermal wavelength. The essence of the phen…
We adopt the Dirac model for quasiparticles in graphene and calculate the finite temperature Casimir interaction between a suspended graphene layer and a parallel conducting surface. We find that at high temperature the Casimir interaction in such system is just one half of that for two ideal conductors separated by the same distance. In this limit single graphene layer behaves exactly as a Drude metal. In particular, the contribution of the TE mode is suppressed, while one of the TM mode saturates the ideal metal value. Behaviour of the Casimir interaction for intermediate temperatures and se…
We present explicitly another example of a temperature inversion symmetry in the Casimir effect for a nonsymmetric boundary condition. We also give an interpretation for our result.
We study the finite temperature Casimir interaction between two concentric cylinders. When the separation between the cylinders is much smaller than the radii of the cylinders, the asymptotic expansions of the Casimir interaction are derived. Both the low temperature and the high temperature regions are considered. The leading terms are found to agree with the proximity force approximations. The low temperature leading term of the temperature correction is also computed and it is found to be independent of the boundary conditions imposed on the larger cylinder.
The situation with the temperature corrections to the Casimir force between real metals of finite conductivity is reported. It is shown that the plasma dielectric function is well adapted to the Lifshitz formula and leads to reasonable results for real conductors. The Drude dielectric function which describes media with dissipation is found not to belong to the application range of the Lifshitz formula at nonzero temperature. For Drude metals the special modification of the zero-frequency term of this formula is suggested. The contradictory results on the subject in recent literature are analy…
We investigate the role of surface plasmons in the electromagnetic Casimir effect at finite temperature, including situations out of global thermal equilibrium. The free energy is calculated analytically and expanded for different regimes of distances and temperatures. Similar to the zero-temperature case, the interaction changes from attraction to repulsion with distance. Thermal effects are shown to be negligible for small plate separations and at room temperature, but become dominant and repulsive at large values of these parameters. In configurations out of global thermal equilibrium, we s…
We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most…
Recently V. A. Yampol'skii, S. Savel'ev, Z. A. Mayselis, S. S. Apostolov, and F. Nori [Phys. Rev. Lett., v.101, 096803 (2008),arXiv:0712.1395] claimed that the Casimir force between a thin metal film described by the Drude model and an ideal metal semispace can decrease with temperature whereas for bulk samples the Casimir force increases with temperature. On this basis the experimental observation of the decreasing temperature dependence of the Casimir force magnitude between a film and a bulk ideal metal was proposed. We demonstrate that, contrary to what is claimed by the authors, the magni…
Performing functional integration of the free Lagrangian, we find the vacuum energy of a field. The functional integration is performed in a way which easily generalizes to systems at non-zero temperature. We use this technique to obtain the Casimir energy density and pressure at arbitrary temperatures.
We consider the ground state energy of the electromagnetic field in a piston geometry. In the idealised case, where the piston and the walls of the chamber are taken as perfect mirrors, the Casimir pressure on the piston is finite and independent of the small scale physics of the media that compose the mirrors; the Casimir-energy of the system can be regularised and is cutoff-independent. Yet we find that, when the body of the piston is filled with an inhomogeneous dielectric medium, the Casimir energy is cutoff-dependent, and the value of the pressure is thus inextricably dependent on the det…
The low temperature expansion of the free energy of atom/plane system is considered for general symmetric form of tensor conductivity of the plane. It is shown that the first correction is proportional to second order of the temperature $\sim T^2$ and comes from TM mode. The agreement of the expansion and exact expressions for different models of conductivity is numerically demonstrated.
We apply the generalized zeta function method to compute the Casimir energy and pressure between an unusual pair of parallel plates at finite temperature, namely: a perfectly conducting plate and an infinitely permeable one. The high and low temperature limits of these quantities are discussed; relationships between high and low temperature limits are estabkished by means of a modified version of the temperature inversion symmetry.
We report on the first measurement of a temperature dependence of the Casimir-Polder force. This measurement was obtained by positioning a nearly pure 87-Rb Bose-Einstein condensate a few microns from a dielectric substrate and exciting its dipole oscillation. Changes in the collective oscillation frequency of the magnetically trapped atoms result from spatial variations in the surface-atom force. In our experiment, the dielectric substrate is heated up to 605 K, while the surrounding environment is kept near room temperature (310 K). The effect of the Casimir-Polder force is measured to be ne…
We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, suc…
The Casimir force - at first a rather unexpected consequence of quantum electrodynamics - was discovered by Hendrik Casimir in Eindhoven in 1948. It predicts that two uncharged metal plates experience an attractive force because of the zero-point fluctuations of the electromagnetic field. The idea was tested experimentally in the 1950's and 1960's, but the results were not so accurate that one could make a definite conclusion regarding the existence of the effect. Evgeny Lifshitz expanded the theory in 1955 so as to deal with general dielectric media. Much experimental work has later been done…
We consider the finite temperature Casimir free energy acting on a spherical shell in (D+1)-dimensional Minkowski spacetime due to the vacuum fluctuations of scalar and electromagnetic fields. Dirichlet, Neumann, perfectly conducting and infinitely permeable boundary conditions are considered. The Casimir free energy is regularized using zeta functional regularization technique. To renormalize the Casimir free energy, we compute the heat kernel coefficients $c_n$, $0\leq n\leq D+1$, from the zeta function $ζ(s)$. After renormalization, the high temperature leading term of the Casimir free ener…
We discuss the temperature correction to the Casimir force between nonideal metallic bodies which caused disagreement in the literature. A general method to find the troubling term is proposed that does not require a direct reference to the Lifshitz formula. The linear in temperature correction is shown to survive for nonideal metals. It is important for small separations between bodies tested in the recent experiments.
We discuss Casimir phenomena which are dominated by long-range fluctuations. A prime example is given by "geothermal" Casimir phenomena where thermal fluctuations in open Casimir geometries can induce significantly enhanced thermal corrections. We illustrate the underlying mechanism with the aid of the inclined-plates configuration, giving rise to enhanced power-law temperature dependences compared to the parallel-plates case. In limiting cases, we find numerical evidence even for fractional power laws induced by long-range fluctuations. We demonstrate that thermal energy densities for open ge…
Starting from a Lagrangian, electromagnetic field in the presence of a nonlinear dielectric medium is quantized using path-integral techniques and correlation functions of different fields are calculated. The susceptibilities of the nonlinear medium are obtained and their relation to coupling functions are determined. Finally, the Casimir energy and force in the presence of a nonlinear medium at finite temperature is calculated.
Schlömilch's formula is generalized and applied to the thermal Casimir effect of a fermionic field confined a three-dimensional rectangular box. The analytic expressions of the Casimir energy and Casimir force are derived for arbitrary temperature and edge sizes. The low and high temperature limits and finite temperature cases are considered for the entire parameter space spanned by edge sizes and/or temperature. In the low temperature limit, it is found that for typical rectangular box, the effective 2-dimensional parameter space spanned by the two edge size ratios can be split into four regi…
We find the joint effect of non-zero temperature and finite conductivity onto the Casimir force between real metals. Configurations of two parallel plates and a sphere (lens) above a plate are considered. Perturbation theory in two parameters (the relative temperature and the relative penetration depth of zero point oscillations into the metal) is developed. Perturbative results are compared with computations. Recent evidence concerning possible existence of large temperature corrections at small separations between the real metals is not supported.
