We discuss corrections to the Casimir effect at finite temperature and effective field theory. Recently, it has been shown that effective field theories can reproduce radiative corrections to the Casimir energy calculated in full QED. We apply effective field theory methods at finite temperature and reproduce the Casimir free energy. We show that the system undergoes dimensional reduction at high temperature and that it can be described by an effective three-dimensional field theory.
We study the corrections to the Casimir effect in the classical geometry of two parallel metallic plates, separated by a distance $a$, due to the presence of a minimal length ($\hbar\sqrt{(β)}$) arising from quantum mechanical models based on a Generalized Uncertainty Principle (GUP). The approach for the quantization of the electromagnetic field is based on projecting onto the maximally localized states of a few specific GUP models and was previously developed to study the Casimir-Polder effect. For each model we compute the lowest order correction in the minimal length to the Casimir energy …
We review the framework we and our collaborators have developed for the study of one-loop quantum corrections to extended field configurations in renormalizable quantum field theories. We work in the continuum, transforming the standard Casimir sum over modes into a sum over bound states and an integral over scattering states weighted by the density of states. We express the density of states in terms of phase shifts, allowing us to extract divergences by identifying Born approximations to the phase shifts with low order Feynman diagrams. Once isolated in Feynman diagrams, the divergences are …
We review recent developments in the Casimir effect which arises in quantization volumes restricted by material boundaries and in spaces with non-Euclidean topology. The starting point of our discussion is the novel exact solution for the electromagnetic Casimir force in the configuration of a cylinder above a plate. The related work for the scalar Casimir effect in sphere-plate configuration is also considered, and the application region of the proximity force theorem is discussed. Next we consider new experiments on the measurement of the Casimir force between metals and between metal and se…
We study the singularities that the Casimir energy of a scalar field in spacetimes with Lifshitz dimensions exhibits, and provide expressions of the energy in terms of multidimensional zeta functions for the massless case. Using the zeta-regularization method, we found that when the 4-dimensional spacetime has Lifshitz dimensions, then for specific values of the critical exponents, the Casimir energy is singular, in contrast to the non-Lifshitz case. Particularly we found that when the value of the critical exponent is $z=2$, the Casimir energy is singular, while for $z\geq 3$ the Casimir ener…
Performing functional integration of the free Lagrangian, we find the vacuum energy of a field. The functional integration is performed in a way which easily generalizes to systems at non-zero temperature. We use this technique to obtain the Casimir energy density and pressure at arbitrary temperatures.
We consider the Casimir effect of a massive vector field between two semi-infinite dielectric slabs. We first derive the generalization of the Lifshitz formula that gives the Casimir interaction energy of two magnetodielectric slabs separated by a magnetodielectric medium due to the vacuum fluctuations of a massive vector field. We then discuss the asymptotic behaviors of the Casimir energy and the Casimir force in various limits, such as low temperature, high temperature, small mass, large mass, up to the first order in the finite conductivity correction, for two real metal semispaces whose d…
We consider polarizable sheets modeled by a lattice of delta function potentials. The Casimir interaction of two such lattices is calculated at nonzero temperature. The heat kernel expansion for periodic singular background is discussed in relation with the high temperature asymptote of the free energy.
The finite temperature Casimir effect for a scalar field in the bulk region of the two Randall-Sundrum models, RSI and RSII, is studied. We calculate the Casimir energy and the Casimir force for two parallel plates with separation $a$ on the visible brane in the RSI model. High-temperature and low-temperature cases are covered. Attractiveness versus repulsiveness of the temperature correction to the force is discussed in the typical special cases of Dirichlet-Dirichlet, Neumann-Neumann, and Dirichlet-Neumann boundary conditions at low temperature. The Abel-Plana summation formula is made use o…
The Casimir energy, free energy and Casimir force are evaluated, at arbitrary finite temperature, for a dilute dielectric ball with uniform velocity of light inside the ball and in the surrounding medium. In particular, we investigate the classical limit at high temperature. The Casimir force found is repulsive, as in previous calculations.
We study the finite temperature Casimir interaction between a cylinder and a plate using the exact formula derived from the Matsubara representation and the functional determinant representation. We consider the scalar field with Dirichlet and Neumann boundary conditions. The asymptotic expansions of the Casimir energy and the Casimir force when the separation $a$ between the cylinder and the plate is small are derived. As in the zero temperature case, it is found that the leading terms of the Casimir energy and the Casimir force agree with those derived from the proximity force approximation …
There has been recent criticism of our approach to the Casimir force between real metallic surfaces at finite temperature, saying it is in conflict with the third law of thermodynamics and in contradiction with experiment. We show that these claims are unwarranted, and that our approach has strong theoretical support, while the experimental situation is still unclear.
We evaluate the difference between the Casimir free energies corresponding to either grounded or isolated perfect conductors, at high temperatures. We show that a general and simple expression for that difference can be given, in terms of the electrostatic capacitance matrix for the system of conductors. For the case of close conductors, we provide approximate expressions for that difference, by evaluating the capacitance matrix using the proximity force approximation. Since the high-temperature limit for the Casimir free energy for a medium described by a frequency-dependent conductivity dive…
The Casimir problem is usually posed as the response of a fluctuating quantum field to externally imposed boundary conditions. In reality, however, no interaction is strong enough to enforce a boundary condition on all frequencies of a fluctuating field. We construct a more physical model of the situation by coupling the fluctuating field to a smooth background potential that implements the boundary condition in a certain limit. To study this problem, we develop general new methods to compute renormalized one--loop quantum energies and energy densities. We use analytic properties of scattering…
Theory of the Casimir effect for a flat graphene layer interacting with a parallel flat material is presented in detail. The high-temperature asymptotics of a free energy in a graphene-metal system coincides with a Drude high-temperature asymptotics of the metal-metal system. High-temperature behavior in the graphene-metal system is expected at separations of the order of 100 nm at temperature T=300K.
In this paper, dedicated to the career of Tom Erber, we consider the Casimir interaction between weakly coupled bodies at nonzero temperature. For the case of semitransparent bodies, that is, ones described by delta-function potentials, we first examine the interaction between an infinite plane and an arbitrary curved surface. In weak coupling, such an interaction energy coincides with the exact form of the proximity force approximation obtained by summing the interaction between opposite surface elements at arbitrary temperature. This result generalizes a theorem proved recently by Decca et a…
The Casimir force and free energy at low temperatures has been the subject of focus for some time. We calculate the temperature correction to the Casimir-Lifshitz free energy between two parallel plates made of dielectric material possessing a constant conductivity at low temperatures, described through a Drude-type dielectric function. For the transverse magnetic (TM) mode such a calculation is new. A further calculation for the case of the TE mode is thereafter presented which extends and generalizes previous work for metals. A numerical study is undertaken to verify the correctness of the a…
Linear in temperature correction to the Casimir force is discussed. The correction is important for small separations between bodies tested in the recent experiments and disappears in the case of perfect conductors.
Finite temperature Casimir theory of the Dirichlet scalar field is developed, assuming that there is a conventional Casimir setup in physical space with two infinitely large plates separated by a gap R and in addition an arbitrary number q of extra compacified dimensions. As a generalization of earlier theory, we assume in the first part of the paper that there is a scalar 'refractive index' N filling the whole of the physical space region. After presenting general expressions for free energy and Casimir forces we focus on the low temperature case, as this is of main physical interest both for…
The finite temperature Casimir free energy is calculated for a dielectric ball of radius $a$ embedded in an infinite medium. The condition $εμ=1$ is assumed for the inside/outside regions. Both the Green function method and the mode summation method are considered, and found to be equivalent. For a dilute medium we find, assuming a simple "square" dispersion relation with an abrupt cutoff at imaginary frequency $\hat ω= ω_0$, the high temperature Casimir free energy to be negative and proportional to $x_0 \equiv ω_0 a$. Also, a physically more realistic dispersion relation involving spatial di…
The Casimir pressure is calculated between parallel metal plates, containing the materials Au, Cu, or Al. Our motivation for making this calculation is the need of comparing theoretical predictions, based on the Lifshitz formula, with experiments that are becoming gradually more accurate. In particular, the finite temperature correction is considered, in view of the recent discussion in the literature on this point. A special attention is given to the case where the difference between the Casimir pressures at two different temperatures, T=300 K and T=350 K, is involved. This seems to be a case…
We provide further evidence for the nontrivial interplay between geometry and temperature in the Casimir effect. We investigate the temperature dependence of the Casimir force between an inclined semi-infinite plate above an infinite plate in D dimensions using the worldline formalism. Whereas the high-temperature behavior is always found to be linear in T in accordance with dimensional-reduction arguments, different power-law behaviors at small temperatures emerge. Unlike the case of infinite parallel plates, which shows the well-known T^D behavior of the force, we find a T^{D-1} behavior for…
We consider the finite temperature Casimir effect between two concentric spheres due to the vacuum fluctuations of the electromagnetic field in the $(D+1)$-dimensional Minkowski spacetime. Different combinations of perfectly conducting and infinitely permeable boundary conditions are imposed on the spheres. The asymptotic expansions of the Casimir free energies when the dimensionless parameter $\vep$, the ratio of the distance between the spheres to the radius of the smaller sphere, is small are derived in both the high temperature region and the low temperature region. It is shown that the le…
We consider the Casimir-Helmholtz free energy at nonzero temperature $T$ for a circular cylinder and perfectly conducting wedge closed by a cylindrical arc, either perfectly conducting or isorefractive. The energy expression at nonzero temperature may be regularized to obtain a finite value, except for a singular corner term in the case of the wedge which is present also at zero temperature. Assuming the medium in the interior of the cylinder or wedge be nondispersive with refractive index $n$, the temperature dependence enters only through the non-dimensional parameter $2πnaT$, $a$ being the …
The geometry dependence of Casimir forces is significantly more pronounced in the presence of thermal fluctuations due to a generic geometry-temperature interplay. We show that the thermal force for standard sphere-plate or cylinder-plate geometries develops a non-monotonic behavior already in the simple case of a fluctuating Dirichlet scalar. In particular, the attractive thermal force can increase for increasing distances below a critical temperature. This anomalous behavior is triggered by a reweighting of relevant fluctuations on the scale of the thermal wavelength. The essence of the phen…
We adopt the Dirac model for quasiparticles in graphene and calculate the finite temperature Casimir interaction between a suspended graphene layer and a parallel conducting surface. We find that at high temperature the Casimir interaction in such system is just one half of that for two ideal conductors separated by the same distance. In this limit single graphene layer behaves exactly as a Drude metal. In particular, the contribution of the TE mode is suppressed, while one of the TM mode saturates the ideal metal value. Behaviour of the Casimir interaction for intermediate temperatures and se…
We present explicitly another example of a temperature inversion symmetry in the Casimir effect for a nonsymmetric boundary condition. We also give an interpretation for our result.
We consider the finite temperature Casimir free energy acting on a spherical shell in (D+1)-dimensional Minkowski spacetime due to the vacuum fluctuations of scalar and electromagnetic fields. Dirichlet, Neumann, perfectly conducting and infinitely permeable boundary conditions are considered. The Casimir free energy is regularized using zeta functional regularization technique. To renormalize the Casimir free energy, we compute the heat kernel coefficients $c_n$, $0\leq n\leq D+1$, from the zeta function $ζ(s)$. After renormalization, the high temperature leading term of the Casimir free ener…
We study the finite temperature Casimir interaction between two concentric cylinders. When the separation between the cylinders is much smaller than the radii of the cylinders, the asymptotic expansions of the Casimir interaction are derived. Both the low temperature and the high temperature regions are considered. The leading terms are found to agree with the proximity force approximations. The low temperature leading term of the temperature correction is also computed and it is found to be independent of the boundary conditions imposed on the larger cylinder.
We investigate the nontrivial interplay between geometry and temperature in the Casimir effect for the sphere-plate and cylinder-plate configurations. At low temperature, the thermal contribution to the Casimir force is dominated by this interplay, implying that standard approximation techniques such as the PFA are inapplicable even in the limit of small surface separation. Thermal fluctuations on scales of the thermal wavelength lead to a delocalization of the thermal force density at low temperatures. As a consequence, the temperature dependence strongly differs from naive expectations. Most…
The low temperature expansion of the free energy of atom/plane system is considered for general symmetric form of tensor conductivity of the plane. It is shown that the first correction is proportional to second order of the temperature $\sim T^2$ and comes from TM mode. The agreement of the expansion and exact expressions for different models of conductivity is numerically demonstrated.
We describe an isoelectronic differential apparatus designed to observe the influence on the Casimir force of the Mott-Anderson metal-insulator transition in doped semiconductors. Alternative theories of dispersion forces lead to different predictions for this effect. The investigation of this problem by standard apparatus, based on absolute measurements of the Casimir force, is very difficult because the effect is small in the region of sub-micron separations, where the Casimir force can be measured precisely. The differential apparatus described here is immune by design to several sources of…
We apply the generalized zeta function method to compute the Casimir energy and pressure between an unusual pair of parallel plates at finite temperature, namely: a perfectly conducting plate and an infinitely permeable one. The high and low temperature limits of these quantities are discussed; relationships between high and low temperature limits are estabkished by means of a modified version of the temperature inversion symmetry.
Thermal effects contributing to the Casimir interaction between objects are usually small at room temperature and they are difficult to separate from quantum mechanical contributions at higher temperatures. We propose that the thermal Casimir force effect can be observed for a graphene flake suspended in a fluid between substrates at the room temperature regime. The properly chosen materials for the substrates and fluid induce a Casimir repulsion. The balance with the other forces, such as gravity and buoyancy, results in a stable temperature dependent equilibrium separation. The suspended gra…
We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, suc…
We discuss the temperature correction to the Casimir force between nonideal metallic bodies which caused disagreement in the literature. A general method to find the troubling term is proposed that does not require a direct reference to the Lifshitz formula. The linear in temperature correction is shown to survive for nonideal metals. It is important for small separations between bodies tested in the recent experiments.
Starting from a Lagrangian, electromagnetic field in the presence of a nonlinear dielectric medium is quantized using path-integral techniques and correlation functions of different fields are calculated. The susceptibilities of the nonlinear medium are obtained and their relation to coupling functions are determined. Finally, the Casimir energy and force in the presence of a nonlinear medium at finite temperature is calculated.
Schlömilch's formula is generalized and applied to the thermal Casimir effect of a fermionic field confined a three-dimensional rectangular box. The analytic expressions of the Casimir energy and Casimir force are derived for arbitrary temperature and edge sizes. The low and high temperature limits and finite temperature cases are considered for the entire parameter space spanned by edge sizes and/or temperature. In the low temperature limit, it is found that for typical rectangular box, the effective 2-dimensional parameter space spanned by the two edge size ratios can be split into four regi…
We find the joint effect of non-zero temperature and finite conductivity onto the Casimir force between real metals. Configurations of two parallel plates and a sphere (lens) above a plate are considered. Perturbation theory in two parameters (the relative temperature and the relative penetration depth of zero point oscillations into the metal) is developed. Perturbative results are compared with computations. Recent evidence concerning possible existence of large temperature corrections at small separations between the real metals is not supported.
We consider the finite temperature Casimir force acting on two parallel plates in a closed cylinder with the same cross section of arbitrary shape in the presence of extra dimensions. Dirichlet boundary conditions are imposed on one plate and fractional Neumann conditions with order between zero (Dirichlet) and one (Neumann) are imposed on the other plate. Formulas for the Casimir force show that it is always attractive for Dirichlet boundary conditions, and is always repulsive when the fractional order is larger than 1/2. For some fractional orders less than 1/2, the Casimir force can be eith…
By considering the effect of diffusion on the external electric field response of charge carriers in metals and semiconductors, it is shown that the finite temperature correction proposed Bostrom and Sernelius requires substantial modification, and there is no large correction as suggested for good conductors. The apparent violation of the Third Law of Thermodynamics of the various proposed temperature corrections to the Casimir force is also resolved. Finally, the effect of Debye screening on electrostatic calibrations between pure germanium surfaces is calculated
Thermal effects on the creation of particles under the influence of time-dependent boundary conditions are investigated. The dominant temperature correction to the energy radiated by a moving mirror is derived by means of response theory. For a resonantly vibrating cavity the thermal effect on the number of created photons is obtained non-perturbatively. Finite temperatures can enhance the pure vacuum effect by several orders of magnitude. The relevance of finite temperature effects for the experimental verification of the dynamical Casimir effect is addressed.
We calculate the Casimir force and free energy for plane metallic mirrors at non-zero temperature. Numerical evaluations are given with temperature and conductivity effects treated simultaneously. The results are compared with the approximation where both effects are treated independently and the corrections simply multiplied. The deviation between the exact and approximated results takes the form of a temperature dependent function for which an analytical expression is given. The knowledge of this function allows simple and accurate estimations at the % level.
We study the Casimir-Polder interaction at finite temperatures between a polarizable small, anisotropic particle and a non-planar surface using a derivative expansion. We obtain the leading and the next-to-leading curvature corrections to the interaction for low and high temperatures. Explicit results are provided for the retarded limit in the presence of a perfectly conducting surface.
The zero-temperature Casimir-Lifshitz force between two plates moving parallel to each other at arbitrary constant speed was found in [New J. Phys. 11, 033035 (2009)]. The solution is here generalized to the case where the plates are at different temperatures. The Casimir-Lifshitz force is obtained by calculating the electromagnetic stress tensor, using the method employed by Antezza et al. [Phys. Rev. A 77, 022901 (2008)] for non-moving plates at different temperatures. The perpendicular force on the plates has contributions from the quantum vacuum and from the thermal radiation; both of thes…
We derive an analytic behavior of the Casimir free energy, entropy and pressure of metallic films in vacuum at low temperature. It is shown that this behavior differs significantly depending on whether the plasma or the Drude model is used to describe the dielectric properties of film metal. For metallic films described by the lossless plasma model the thermal corrections to the Casimir energy and pressure drop to zero exponentially fast with increasing film thickness. There is no classical limit in this case. The Casimir entropy satisfies the Nernst heat theorem. For metallic films with perfe…
We evaluate the Casimir-Polder potential between two atoms in the presence of an infinite perfectly conducting plate and at nonzero temperature. In order to calculate the potential, we use a method based on equal-time spatial correlations of the electric field, already used to evaluate the effect of boundary conditions on interatomic potentials. This method gives also a transparent physical picture of the role of a finite temperature and boundary conditions on the Casimir-Polder potential. We obtain an analytical expression of the potential both in the near and far zones, and consider several …
A matter-field theory of the Casimir force is formulated in which the electromagnetic field and collective modes of dielectric media are treated on an equal footing. In our theory, the Casimir force is attributed to zero-point energies of the combined matter-field modes. We analyze why some of the existing theories favor the interpretation of the Casimir force as originating from zero-point energies of the electromagnetic field and others from those of the matter.
We investigate the role of surface plasmons in the electromagnetic Casimir effect at finite temperature, including situations out of global thermal equilibrium. The free energy is calculated analytically and expanded for different regimes of distances and temperatures. Similar to the zero-temperature case, the interaction changes from attraction to repulsion with distance. Thermal effects are shown to be negligible for small plate separations and at room temperature, but become dominant and repulsive at large values of these parameters. In configurations out of global thermal equilibrium, we s…
Recently V. A. Yampol'skii, S. Savel'ev, Z. A. Mayselis, S. S. Apostolov, and F. Nori [Phys. Rev. Lett., v.101, 096803 (2008),arXiv:0712.1395] claimed that the Casimir force between a thin metal film described by the Drude model and an ideal metal semispace can decrease with temperature whereas for bulk samples the Casimir force increases with temperature. On this basis the experimental observation of the decreasing temperature dependence of the Casimir force magnitude between a film and a bulk ideal metal was proposed. We demonstrate that, contrary to what is claimed by the authors, the magni…
We present calculations of the quantum and thermal Casimir interaction between real mirrors in electromagnetic fields using the scattering approach. We begin with a pedagogical introduction of this approach in simple cases where the scattering is specular. We then discuss the more general case of stationary arbitrarily shaped mirrors and present in particular applications to two geometries of interest for experiments, that is corrugated plates and the plane-sphere geometry. The results nicely illustrate the rich correlations existing between material properties, temperature and geometry in the…
When comparing experimental results with theoretical predictions of the Casimir force, the accuracy of the theory is as important as the precision of experiments. Here we evaluate the Casimir force when finite conductivity of the reflectors and finite temperature are simultaneously taken into account. We show that these two corrections are correlated, i.e. that they can not, in principle, be evaluated separately and simply multiplied. We estimate the correlation factor which measures the deviation from this common approximation. We focus our attention on the case of smooth and plane plates wit…
It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [Phys. Rev. Lett. 103, 130405 (2009)]. We show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates, are identical to those pertaining to the Foucault current interaction alone, up to a correction which is very small for good metals. Moreover, a mode density along real frequencies is introduced, showing that t…
We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a non-monotonic behavior previously demonstrated in a piston-like geometry.
