The fundamentals of a quantum heat engine are derived from first principles. The study is based on the equation of motion of a minimum set of operators which is then used to define the state of the system. The relation between the quantum framework and thermodynamical observables is examined. A four stroke heat engine model with a coupled two-level-system as a working fluid is used to explore the fundamental relations. In the model used, the internal Hamiltonian does not commute with the external control field which defines the two adiabatic branches. Heat is transferred to the working fluid by coupling to hot and cold reservoirs under constant field values. Explicit quantum equation of motion for the relevant observables are derived on all branches. The dynamics on the heat transfer constant field branches is solved in closed form. On the adiabats, a general numerical solution is used and compared with a particular analytic solution. These solutions are combined to construct the cycle of operation. The engine is then analyzed in terms of frequency-entropy and entropy-temperature graphs. The irreversible nature of the engine is the result of finite heat transfer rates and friction-like behavior due to noncommutability of the internal and external Hamiltonian.
A quantum model of a heat engine resembling the Otto cycle is employed to explore strategies to suppress frictional losses. These losses are caused by the inability of the engine's working medium to follow adiabatically the change in the Hamiltonian during the expansion and compression stages. By adding external noise to the engine, frictional losses can be suppressed.
We analyze an autonomous thermoelectric engine composed of two superconducting qubits coupled to separate heat baths and connected by a Josephson junction. Work and heat are process quantities and not observables of the engine quantum system, but their rates can be derived from the steady state expectation value of appropriate system observables and their fluctuations are given by correlation functions determined with the GKLS master equation and quantum regression theorem. The correlation functions also reveal a cyclical, dynamical transfer of energy - the strokes of the engine - hiding under…
We put forth a quantum simulation of a stroboscopic two-stroke thermal engine in the IBMQ processor. The system consists of a quantum spin chain connected to two baths at their boundaries, prepared at different temperatures using the variational quantum thermalizer algorithm. The dynamics alternates between heat and work strokes, which can be separately designed using independent quantum circuits. The results show good agreement with theoretical predictions, showcasing IBMQ as a powerful tool to study thermodynamics in the quantum regime, as well as the implementation of variational quantum al…
In this work, we introduce a three-stroke quantum engine with a single-qubit work-ing substance whose cycle consists of two strokes arise due to performing two distinctgeneral quantum measurements and it is completed by thermalization through contactwith a finite temperature thermal reservoir. It is demonstrated that energy is importedinto the engine by first measurement channel and work (usefulenergy) is extracted fromit, in a frictionless isentropic manner, by the second measurement channel. It is par-ticularly shown that the engine is capable to have perfect efficiency. In continuation,we e…
We study how a quantum heat engine based on a single trapped ion performs in finite time. The always-on thermal environment acts like the hot bath, while the motional degree of freedom of the ion plays the role of the effective cold bath. The hot isochoric stroke is implemented via the interaction of the ion with its hot environment, while a projective measurement of the internal state of the ion is performed as an equivalent to the cold isochoric stroke. The expansion and compression strokes are implemented via suitable change in applied magnetic field. We study in detail how the finite durat…
We propose and analyze the theoretical model for a two-stroke quantum heat engine with one of the heat baths replaced by a non-selective quantum measurement. We show that the engine's invariant reference state depends on whether the cycle is monitored or unmonitored via diagnostic measurements to determine the engine's work output. We explore in detail the average work output and fluctuations of the proposed heat engine for the monitored and unmonitored cases. We also identify unitary work strokes for which the invariant states can support coherences in the energy basis leading to differing pr…
In this work, we study the efficiency of charging a quantum battery through optical pumping. The battery consists of a qutrit and it is connected to a natural thermal reservoir and an external coherent drive in the limit where its upper energy level can be adiabatically eliminated from the dynamics. In this scenario, the drive plus spontaneous emission optically pumps the intermediate energy level of the qutrit and the battery can be understood as being charged by an effective higher temperature reservoir that takes it out of equilibrium with the natural reservoir and stores useful energy in i…
A multilevel four-stroke engine where the thermalization stokes are generated by unitary collisions with bath particles is analyzed. Our model is solvable even when the engine operates far from thermal equilibrium and in the strong system-bath coupling. Necessary operation conditions for the heat machine to perform as an engine or a refrigerator are derived. We relate the work and efficiency of the device to local and non-local statistical properties of the baths (purity, mutual coincidence etc.). In particular, we relate the Clausius inequality to the symmetrized relative entropy of the baths…
The formulation of models describing quantum versions of heat engines plays an important role in the quest toward establishing the laws of thermodynamics in the quantum regime. Of particular importance is the description of stroke-based engines which can operate at finite-time. In this paper we put forth a framework for describing stroboscopic, two-stroke engines, in generic quantum chains. The framework is a generalization of the so-called SWAP engine and is based on a collisional model, which alternates between pure heat and pure work strokes. The transient evolution towards a limit-cycle is…
The concept of inner friction, by which a quantum heat engine is unable to follow adiabatically its strokes and thus dissipates useful energy, is illustrated in an exact physical model where the working substance consists of an ensemble of misaligned spins interacting with a magnetic field and performing the Otto cycle. The effect of this static disorder under a finite-time cycle gives a new perspective of the concept of inner friction under realistic settings. We investigate the efficiency and power of this engine and relate its performance to the amount of friction from misalignment and to t…
We suggest alternative quantum Otto engines, using heat bath algorithmic cooling with partner pairing algorithm instead of isochoric cooling. Liquid state nuclear magnetic resonance systems in one entropy sink are considered as working fluids. Then, the extractable work and thermal efficiency are analyzed in detail for four-stroke and two-stroke type of quantum Otto engines. The role of heat bath algorithmic cooling in these cycles is to use a single entropy sink instead of two. Also, this cooling algorithm increases the power of engines reducing the time required for one cycle.
We prove a generalization of the Lindblad's fundamental no-go result: A quantum system cannot be completely frozen and, in some cases, even thermalized via translationally invariant dissipation -- the quantum friction. Nevertheless, a practical methodology is proposed for engineering nearly perfect quantum analogs of classical friction within the Doppler cooling framework. These findings pave the way for hallmark dissipative engineering (e.g. nonreciprocal couplings) with atoms and molecules.
A four stroke quantum engine which alternately interacts with a measurement apparatus and a single heat bath is discussed in detail with respect to the average work and heat as well as to the fluctuations of work and heat. The efficiency and the reliability of such an engine with a harmonic oscillator as working substance are analyzed under different conditions such as different speeds of the work strokes, different temperatures of the heat bath and various strengths of the energy supplying measurement. For imperfect thermalization strokes of finite duration also the power of the engine is ana…
A single driven spin is investigated as the working substance of a six-stroke irreversible quantum Carnot cycle. The role of inner friction associated with the finite-time adiabatic transformations on the cycle efficiency and the harvested work are investigated in detail. The inner friction is found to significantly reduce the work output and the cycle efficiency which can make the engine incapable to produce positive work for the too fast adiabatic transformations. The ideal Carnot efficiency is found to be reached only for the quasi-static transformations. A deviation of the cycle efficiency…
The minimal-coupling quantum heat engine is a thermal machine consisting of an explicit energy storage system, heat baths, and a working body, which alternatively couples to subsystems through discrete strokes -- energy-conserving two-body quantum operations. Within this paradigm, we present a general framework of quantum thermodynamics, where a work extraction process is fundamentally limited by a flow of non-passive energy (ergotropy), while energy dissipation is expressed through a flow of passive energy. It turns out that small dimensionality of the working body and a restriction only to t…
In order to build a quantum analog of traditional Carnot engine, a common choice is replacing the two thermodynamic adiabatic processes with two quantum mechanical adiabatic processes. In general, such quantum Carnot engine has six strokes. We analyze the efficiency of such six-stroke quantum Carnot engine in a perturbative way.
Bose-Einstein condensates can be used to produce work by tuning the strength of the interparticle interactions with the help of Feshbach resonances. In inhomogeneous potentials, these interaction ramps change the volume of the trapped gas allowing one to create a thermodynamic cycle known as the Feshbach engine. However, in order to obtain a large power output, the engine strokes must be performed on a short timescale, which is in contrast with the fact that the efficiency of the engine is reduced by irreversible work if the strokes are done in a non-adiabatic fashion. Here we investigate how …
It is investigated whether non-Markovianity, i.e., the memory effects resulting from the coupling of the system to its environment, can be beneficial for the performance of quantum heat engines. Specifically, two physical models are considered. The first one is a well known single-qubit Otto engine; the non-Markovian behaviour is there implemented by replacing standard thermalization strokes with so-called extremal thermal operations which cannot be realized without the memory effects. The second one is a three-stroke engine in which the cycle consists of two extremal thermal operations and a …
Optimal performance of thermal machines is reached by suppressing friction. Friction in quantum thermodynamics results from fast driving schemes that generate nonadiabatic excitations. The far-from-equilibrium dynamics of quantum devices can be tailored by shortcuts to adiabaticity to suppress quantum friction. We experimentally demonstrate friction-free superadiabatic strokes with a trapped unitary Fermi gas as a working substance and establish the equivalence between the superadiabatic mean work and its adiabatic value.
Experimental Demonstration of a Measurement-Feedback Quantum Information Engine
Quantum Information Institute, School of Physics and Laboratory of Zhongyuan Light, Zhengzhou University（郑州大学物理学院量子信息研究所中原光实验室）；Department of Physics, Nanchang University（南昌大学物理系）
We consider a finite-time quantum Otto heat engine that consists of two isochoric (thermal-contact) process, where the system is alternatively coupled to a hot squeezed and a cold thermal reservoir, and two unitary driven strokes, where the system is isolated from these two baths and its von Neumann entropy keeps constant. Both quantum inner friction and coherence are generated along the driven stroke and coherence cannot be fully erased after the finite-time hot isochore. Using full counting statistics, we present the probability distribution functions of heat injection and total work per cyc…
Thermodynamic Performance of a Measurement-Driven Quantum Engine with a Two-Parameter $(p,q)$-Deformed Harmonic Oscillator
Khalifa University of Science and Technology（哈利法科学技术大学）；KU Research Center for Advanced Intelligent Systems (AIS), Khalifa University of Science and Technology（哈利法科学技术大学 KU 先进智能系统研究中心）
Ulm University（乌尔姆大学）；Institute of Theoretical Physics, Ulm University（乌尔姆大学理论物理研究所）；Center for Integrated Quantum Science and Technology (IQST)（集成量子科学与技术中心）
The Filtering Demon: Beyond Standard Thermodynamic Bounds and Harnessing Measurement Error and Quantum Friction
College of Physics, Jilin University（吉林大学物理学院）；Department of Chemistry and Department of Physics and Astronomy, State University of New York at Stony Brook（纽约州立大学石溪分校化学系和物理与天文学系）
Equivalence of Discrete and Continuous Otto-Like Engines assisted by Catalysts: Mapping Catalytic Advantages from the Discrete to the Continuous Framework
University of Gdańsk（格但斯克大学）；Los Alamos National Laboratory（洛斯阿拉莫斯国家实验室）
We investigate heat engines whose working substance is made of two coupled qubits performing a generalised Otto cycle by varying their applied magnetic field or their interaction strength during the compression and expansion strokes. During the heating and cooling strokes, the two qubits are coupled to local and common environments that are not necessarily at equilibrium. We find instances of quantum engines coupled to non equilibrium common environments exhibiting non-trivial connections to quantum correlations as witnessed by a monotonic dependence of the work produced on quantum discord and…
We study a four-stroke Otto engine whose working fluid is a quantum Ising chain. The thermodynamic cycle consists in sweeps of the transverse magnetic field occurring in thermal isolation, alternated by thermalisation strokes with reservoirs at different temperatures. The system-environment coupling is modelled in a thermodynamically consistent way by means of a nonlocal Lindblad master equation. We show that the engine may operate in four different operation modes, depending on the various parameters, in particular it can act as a heat engine and as a refrigerator. We detect an enhancement of…
We study the thermodynamic performance of the finite-time non-regenerative Stirling cycle used as a quantum heat engine. We consider specifically the case in which the working substance (WS) is a two-level system. The Stirling cycle is made of two isochoric transformations separated by a compression and an expansion stroke during which the working substance is in contact with a thermal reservoir. To describe these two strokes we derive a non-Markovian master equation which allows to study the dynamics of a driven open quantum system with arbitrary fast driving. We found that the finite-time dy…
In finite-time quantum heat engines, some work is consumed to drive a working fluid accompanying coherence, which is called `friction'. To understand the role of friction in quantum thermodynamics, we present a couple of finite-time quantum Otto cycles with two different baths: Agarwal versus Lindbladian. We solve them exactly and compare the performance of the Agarwal engine with that of the Lindbladian engine. In particular, we find remarkable and counterintuitive results that the performance of the Agarwal engine due to friction can be much higher than that in the quasistatic limit with the…
We consider two spin-1/2 particles with isotropic Heisenberg interaction, as the working substance of a quantum heat engine. We observe a frictional effect on the adiabatic branches of the heat cycle, which arises due to an inhomogeneous driving at a finite rate of the external magnetic field. The frictional effect is characterized by entropy production in the system and reduction in the work extracted. Corresponding to a sudden and a very slow driving, we find expressions for the lower and upper bounds of work that can be extracted on the adiabatic branches. These bounds are also confirmed wi…
We consider the optimization of the work output and fluctuations of a finite-time quantum Otto heat engine cycle consisting of compression and expansion work strokes of unequal duration. The asymmetry of the cycle is characterized by a parameter $r_u$ giving the ratio of the times for the compression and expansion work strokes. For such an asymmetric quantum Otto engine cycle, with working substance chosen as a harmonic oscillator or a two-level system, we find that the optimal values of $r_u$ maximising the work output and the reliability (defined as the ratio of average work output to its st…
We discuss a self-contained spin-boson model for a measurement-driven engine, in which a demon generates work from thermal excitations of a quantum spin via measurement and feedback control. Instead of granting it full direct access to the spin state and to Landauer's erasure strokes for optimal performance, we restrict this demon's action to pointer measurements, i.e. random or continuous interrogations of a damped mechanical oscillator that assumes macroscopically distinct positions depending on the spin state. The engine can reach simultaneously the power and efficiency benchmarks and opera…
We present a detailed study of quantum thermal machines employing quantum systems as working substances. In particular, we study two different types of two-stroke cycles where two collections of identical quantum systems with evenly spaced energy levels are initially prepared at thermal equilibrium by putting them in contact with a cold and a hot thermal bath, respectively. The two cycles differ in the absence or the presence of a mediator system, while, in both cases, non-resonant exchange Hamiltonians are exploited as particle interactions. We show that the efficiencies of these machines dep…
The precise estimation of small parameters is a challenging problem in quantum metrology. Here, we introduce a protocol for accurately measuring weak magnetic fields using a two-level magnetometer, which is coupled to two (hot and cold) thermal baths and operated as a two-stroke quantum thermal machine. Its working substance consists of a two-level system (TLS), generated by an unknown weak magnetic field acting on a qubit, and a second TLS arising due to the application of a known strong and tunable field on another qubit. Depending on this field, the machine may either act as an engine or a …
Cross-Spectral Reservoir Correlations as a Resource for Finite-Time Quantum Otto Engines
Ramakrishna Mission Vivekananda Educational and Research Institute（拉马克里希纳使命维韦卡南达教育研究所）；TCG CREST；Academy of Scientific and Innovative Research (AcSIR)（科学与创新研究学院）
A quantum thermodynamic cycle with a chiral multiferroic working substance such as $\textrm{LiCu}_{2}\textrm{O}_{2}$ is presented. Shortcuts to adiabaticity are employed to achieve an efficient, finite time quantum thermodynamic cycle which is found to depend on the spin ordering. The emergent electric polarization associated with the chiral spin order, i.e. the magnetoelectric coupling, renders possible steering of the spin order by an external electric field and hence renders possible an electric-field control of the cycle. Due to the intrinsic coupling between of the spin and the electric p…
