The Martin boundary of a Cartan-Hadamard manifold describes a fine geometric structure at infinity, which is a sub-space of positive harmonic functions. We describe conditions which ensure that some points of the sphere at infinity belong to the Martin boundary as well. In the case of the universal cover of a compact manifold with Ballmann rank one, we show that Martin points are generic and of full harmonic measure. The result of this paper provides a partial answer to an open problem of S. T. Yau.
For a manifold with nonpositive curvature, the Martin boundary is described by the behavior of normalized Green's functions at infinity. A classical result by Anderson and Schoen states that if the manifold has pinched negative curvature, the geometric boundary is the same as the Martin boundary. In this paper, we study the Martin boundary for rank 1 manifolds admitting compact quotients. It is proved that a residual set in the geometric boundary can be identified naturally with a subset of the Martin boundary. This gives a partial answer to one of the open problems in geometry collected by Ya…
In this paper we consider the Martin compactification, associated with the operator $\mathcal{L} = Δ-1$, of a complete non-compact surface $(Σ^2, ds^2)$ with negative curvature. In particular, we investigate positive eigenfunctions with eigenvalue one of the Laplace operator $Δ$ of $(Σ^2, ds^2)$ and prove a uniqueness result: such eigenfunctions are unique up to a positive constant multiple if they vanish on the part of the geometric boundary $S_\infty(Σ^2)$ of $Σ^2$ where the curvature is bounded above by a negative constant, and satisfy some growth estimate on the other part of $S_\infty(Σ^2…
We give a general criterion for the Dirichlet problem at infinity (DPI) on a Cartan-Hadamard surface to be solvable, which we primarily use to give the best possible upper radial radial curvature bound for solvability of the DPI, but which is also flexible enough to accommodate flats. In particular, any (upper) radial curvature bound which implies transience also implies solvability of the DPI, which is perhaps surprising. Taking advantage of the structure provided by uniformization, we show that solvability of the DPI implies there is a natural continuous surjection of the Martin boundary ont…
We show any Riemannian curvature model can be geometrically realized by a manifold with constant scalar curvature. We also show that any pseudo-Hermitian curvature model, para-Hermitian curvature model, hyper-pseudo-Hermitian curvature model, or hyper-para-Hermitian curvature model can be realized by a manifold with constant scalar and *-scalar curvature.
In this note, we prove that for a complete noncompact three dimensional Riemannian manifold with bounded sectional curvature, if it has uniformly positive scalar curvature, then there is a uniform lower bound on the injectivity radius.
We establish variational formulas for Ricci upper and lower bounds, as well as a derivative formula for the Ricci curvature. As applications, constant curvature manifolds, Einstein manifolds and Ricci parallel manifolds are identified, respectively, with different integral-differential formulas and semigroup inequalities. Moreover, by using derivative and Hessian formulas for the heat semigroup $P_t$ developed from stochastic analysis, explicit Hessian estimates are derived on Einstein and Ricci parallel manifolds.
The infimum of the Weyl functional is shown to be surprisingly small on many compact 4-manifolds that admit positive-scalar-curvature metrics. Results are also proved that systematically compare the scalar and self-dual Weyl curvatures of certain almost-Kaehler 4-manifolds.
In this work, we construct distance like functions with integral hessian bound on manifolds with small curvature concentration and use it to construct Ricci flows on manifolds with possibly unbounded curvature. As an application, we study the geometric structure of those manifolds without bounded curvature assumption. In particular, we show that manifolds with Ricci lower bound, non-negative scalar curvature, bounded entropy, Ahlfors $n$-regular and small curvature concentration are topologically Euclidean.
We obtained that any 2-form and any smooth function on 2-manifolds with boundary can be realized as the curvature form and the gaussian curvature function of some Riemmanian metric, respectively.
We give conditions which imply that a complete noncompact manifold with quadratic curvature decay has finite topological type. In particular, we find links between the topology of a manifold with quadractic curvature decay and some properties of the asymptotic cones of such a manifold.
It is proved that if an AK2-manifold of dimension greater or equal to 6 is of pointwise constant antiholomorphic sectional curvature, then it is a 6-dimensional manifold of constant negative sectional curvature or a Kähler manifold of constant holomorphic sectional curvature.
In a previous paper, we constructed complete manifolds of positive Ricci curvature with quadratically asymptotically nonnegative curvature and infinite topological type but dimension $\ge 6$. The purpose of the present paper is to use a different way to exhibit a family of complete $I$-dimensinal ($I\ge5$) Riemannian manifolds of positive Ricci curvature, quadratically asymptotically nonnegative sectional curvature, and certain infinite Betti number $b_j$ ($2\le j\le I-2$).
In this paper, we study the interplay of geometry and positive scalar curvature on a complete, non-compact manifold with non-negative Ricci curvature. In three-dimensional manifold, we prove a minimal volume growth, an estimate of integral of scalar curvature and width. In higher dimensional manifold, we obtain a volume growth with a stronger condition.
We prove a sharp Sobolev inequality on manifolds with nonnegative Ricci curvature. Moreover, we prove a Michael-Simon inequality for submanifolds in manifolds with nonnegative sectional curvature. Both inequalities depend on the asymptotic volume ratio of the ambient manifold.
An identity of conformal-projective curvature tensor of a statistical manifold is studied in this paper. The relation between the constancy of curvature and conformal-projective flatness of statistical manifolds is also discussed.
For k at least 2, we exhibit complete k-curvature homogeneous neutral signature pseudo-Riemannian manifolds which are not locally affine homogeneous (and hence not locally homogeneous). The curvature tensor of these manifolds is modeled on that of an indecomposible symmetric space. All the local scalar Weyl curvature invariants of these manifolds vanish.
In this paper we prove a compactness theorem for constant mean curvature surfaces with area and genus bound in three manifold with positive Ricci curvature. As an application, we give a lower bound of first eigenvalue of constant mean curvature surfaces in three manifold with positive Ricci curvature.
For any k which is at least 2, we exhibit complete k-curvature homogeneous neutral signature pseudo-Riemannian manifolds which are not k+1-affine curvature homogeneous, and hence not locally homogeneous. All the local scalar Weyl invariants of these manifolds vanish. These manifolds are Ricci flat, Osserman, and Ivanov-Petrova.
We will show that a statistical manifold $(M, g, \nabla)$ has a constant curvature if and only if it is a projectively flat conjugate symmetric manifold, that is, the affine connection $\nabla$ is projectively flat and the curvatures satisfies $R=R^*$, where $R^*$ is the curvature of the dual connection $\nabla^*$. Moreover, we will show that properly convex structures on a projectively flat compact manifold induces constant curvature $-1$ statistical structures and vice versa.
We draw elliptic regularity results for 4-manifolds with an elliptic system, without Sobolev constant control. Direct use of analysis is circumvented; the results come mainly through geometric and topological arguments. In contrast to our previous paper, which worked predominantly on the scale of the curvature radius, the results here provide curvature controls on a fixed scale.
We study curvature identities on contact metric manifolds on the geometry of the corresponding almost Käehler cones, and we provide applications of the derived curvature identities.
Patterson discussed the curvature identities on Riemannian manifolds in [14], and a curvature identity for any 6-dimensional Riemannian manifold was independently derived from the Chern-Gauss-Bonnet Theorem [8]. In this paper, we provide the explicit formulae of Patterson's curvature identity that holds on 5-dimensional and 6-dimensional Einstein manifolds. We confirm that the curvature identities on the Einstein manifold from the previous work [8] are the same as the curvature identities deduced from Patterson's result. We also provide examples that support the theorems.
We derive a curvature identity that holds on any 6-dimensional Riemannian manifold, from the Chern-Gauss-Bonnet theorem for a 6-dimensional closed Riemannian manifold. We also introduce some applications of this curvature identity.
In this paper, by introducing a notion of local quasi holomorphic frame, we obtain a curvature formula for almost Hermitian manifolds which is similar to that of Hermitian manifolds. Moreover, as applications of the curvature formula, we extend a result of H.S. Wu and a result of F. Zheng to almost Hermitian manifolds.
For the Bach-flat closed manifold with positive scalar curvature, we prove a rigidity result under a given inequality involving the Weyl curvature and the traceless Ricci curvature. Moveover, under an inequality involving $L^{\frac{n}{2}}$-norm of the Weyl curvature, the traceless Ricci curvature and the Yamabe invariant, we also provide a similar rigidity result. As an application, we obtain some rigidity results on 4-dimensional manifolds.
We first provide an alternative proof of the classical Weitzneböck formula for Einstein four-manifolds using Berger curvature decomposition, motivated by which we establish a unified framework for a Weitzenböck formula for a large class of canonical metrics on four-manifolds (or a Weitzenböck formula for "Einstein metrics" on four-dimensional smooth metric measure spaces). As applications, we classify Einstein four-manifolds of half two-nonnegative curvature operator, which in some sense provides a characterization of Kähler-Einstein metrics with positive scalar curvature on four-manifolds, we…
This is a survey of recent results on manifolds with positive curvature from a series of lecture given in Guanajuato, Mexico in 2010. It also contains some hitsorical comments.
There is a conjecture that a complete Riemannian 3-manifold with bounded sectional curvature, and pointwise pinched nonnegative Ricci curvature, must be flat or compact. We show that this is true when the negative part (if any) of the sectional curvature decays quadratically.
In dimension greater than four, we prove that if a Hermitian non-Kaehler manifold is of pointwise constant antiholomorphic sectional curvatures, then it is of constant sectional curvatures.
Compact flat surfaces of homogeneous Riemannian 3-manifolds with isometry group of dimension 4 are classified. Non-existence results for compact constant Gauss curvature surfaces in these 3-manifolds are established.
We construct a compact Kähler manifold of nonnegative quadratic bisectional curvature, which does not admit any Kähler metric of nonnegative orthogonal bisectional curvature. The manifold is a 7-dimensional Kähler C-space with second Betti number equal to 1, and its canonical metric is a Kähler-Einstein metric of positive scalar curvature
Locally homogeneous Lorentzian three-manifolds with recurrect curvature are special examples of Walker manifolds, that is, they admit a parallel null vector field. We obtain a full classification of the symmetries of these spaces, with particular regard to symmetries related to their curvature: Ricci and matter collineations, curvature and Weyl collineations. Several results are given for the broader class of three-dimensional Walker manifolds.
In this paper, we systematically compute the Bianchi identities for the canonical connection on an almost Hermitian manifold. Moreover, we also compute the curvature tensor of the Levi-Civita connection on almost Hermitian manifolds in terms of curvature and torsion of the canonical connection. As applications of the curvature identities, we obtain some results about the integrability of quasi Kaehler manifolds and some properties of nearly Kaehler manifolds.
We obtain an Euclidean volume growth results for complete Riemannian manifolds satisfying a Euclidean Sobolev inequality and a spectral type condition on the Ricci curvature. We also obtain eigenvalue estimates, heat kernel estimates, Betti number estimates for closed manifolds whose Ricci curvature is controlled in the Kato class.
B. Y. Chen establish the relationship between the Ricci curvature and the squared mean curvature for submanifolds of Riemannian space form with arbitrary codimension. In this paper, we generalize the relationship between the Ricci curvature and the squared norm of mean curvature vector for submanifolds of Bochner Kahler manifolds.
We prove that a Kahler manifold with positive bisectional curvature and maximal diameter is isometric to the complex projective space with the Fubini-Study metric.
We prove the following results: An almost Hermitian manifold of indefinite metric is of pointwise constant holomorphic sectional curvature if the holomorphic sectional curvature is bounded from above and from below. If the antiholomorphic sectional curvature is bounded either from above or from below, then the manifold is of pointwise constant antiholomorphic sectional curvature. Similar results are obtained for almost Hermitian manifolds of definite metric.
In this work we prove that the Whitehead manifold has no complete metric of positive scalar curvature. This result can be generalized to the genus one case. Precisely, we show that no contractible genus one $3$-manifold admits a complete metric of positive scalar curvature.
