Nader Yeganefar
We give conditions which imply that a complete noncompact manifold with quadratic curvature decay has finite topological type. In particular, we find links between the topology of a manifold with quadractic curvature decay and some properties of the asymptotic cones of such a manifold.
机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。
继续探索
In a previous paper, we constructed complete manifolds of positive Ricci curvature with quadratically asymptotically nonnegative curvature and infinite topological type but dimension $\ge 6$. The purpose of the present paper is to use a different way to exhibit a family of complete $I$-dimensinal ($I\ge5$) Riemannian manifolds of positive Ricci curvature, quadratically asymptotically nonnegative sectional curvature, and certain infinite Betti number $b_j$ ($2\le j\le I-2$).
Four-dimensional homogeneous critical metrics for quadratic curvature functionals
本文确定了四维空间中所有使二次曲率泛函达到临界的齐次度量。
We give sufficient conditions for a noncompact Riemannian manifold, which has quadratic curvature decay, to have finite topological type with ends that are cones over spherical space forms.
We study rigidity results for the Einstein metrics as the critical points of a family of known quadratic curvature functionals involving the scalar curvature, the Ricci curvature and the Riemannian curvature tensor, characterized by some pointwise inequalities involving the Weyl curvature and the traceless Ricci curvature. Moreover, we also provide a few rigidity results for locally conformally flat critical metrics.
We study closed $n$-dimensional manifolds of which the metrics are critical for quadratic curvature functionals involving the Ricci curvature, the scalar curvature and the Riemannian curvature tensor on the space of Riemannian metrics with unit volume. Under some additional integral conditions, we classify such manifolds. Moreover, under some curvature conditions, the result that a critical metric must be Einstein is proved.
We construct a compact Kähler manifold of nonnegative quadratic bisectional curvature, which does not admit any Kähler metric of nonnegative orthogonal bisectional curvature. The manifold is a 7-dimensional Kähler C-space with second Betti number equal to 1, and its canonical metric is a Kähler-Einstein metric of positive scalar curvature
We show that there are topological obstructions for a noncompact manifold to admit a Riemannian metric with quadratic curvature decay and a volume growth which is slower than that of Euclidean space of the same dimension.
Sobolev Inequality In Manifolds With Lower Quadratic Curvature Decay
本文利用ABP方法，在具有下二次曲率衰减的完备黎曼流形中，为紧致区域和子流形建立了Sobolev不等式。
In this paper, we investigate a class of quadratic Riemannian curvature functionals on closed smooth manifold $M$ of dimension $n\ge 3$ on the space of Riemannian metrics on $M$ with unit volume. We study the stability of these functionals at the metric with constant sectional curvature as its critical point.
In this paper, we consider some rigidity results for the Einstein metrics as the critical points of some known quadratic curvature functionals on complete manifolds, characterized by some point-wise inequalities. Moreover, we also provide rigidity results by the integral inequalities involving the Weyl curvature, the trace-less Ricci curvature and the Sobolev constant, accordingly.
In this paper, we study Riemannian functionals defined by $L^2$-norms of Ricci curvature, scalar curvature, Weyl curvature, and Riemannian curvature. We try to understand stability of their critical points that are products of Einstein metrics. In particular, we prove that the product of a spherical space form and a compact hyperbolic manifold is unstable for some quadratic functionals if the first eigenvalue of the Laplacian of the hyperbolic manifold is sufficiently small.
In this paper, we prove some rigidity results for the Einstein metrics as the critical points of a family of known quadratic curvature functionals on closed manifolds, characterized by some point-wise inequalities. Moreover, we also provide a few rigidity results that involve the Weyl curvature, the trace-less Ricci curvature and the Yamabe invariant, accordingly.
Ricci solitons as critical points of quadratic curvature functionals
研究Ricci孤子作为特殊二次曲率泛函临界点的刚性，分析其与Einstein度量的关系。
In this paper, we construct a complete n-dim Riemannian manifold with positive Ricci curvature, quadratically nonnegatively curved infinity and infinite topological type. This gives a negative answer to a conjecture by Jiping Sha and Zhongmin Shen in the case of n greater than or equal to 6.
In this article we study compact K\ahler manifolds satisfying a certain nonnegativity condition on the bisectional curvature. Under this condition, we show that the scalar curvature is nonnegative and that the first Chern class is positive assuming local irreducibility. We also obtain a partial classification of possible de Rham decompositions of the universal cover under this condition
We show any Riemannian curvature model can be geometrically realized by a manifold with constant scalar curvature. We also show that any pseudo-Hermitian curvature model, para-Hermitian curvature model, hyper-pseudo-Hermitian curvature model, or hyper-para-Hermitian curvature model can be realized by a manifold with constant scalar and *-scalar curvature.
We use elementary methods to construct a minimal lamination of the interior of a positive cone in R3.
In this note, we prove that for a complete noncompact three dimensional Riemannian manifold with bounded sectional curvature, if it has uniformly positive scalar curvature, then there is a uniform lower bound on the injectivity radius.
We establish variational formulas for Ricci upper and lower bounds, as well as a derivative formula for the Ricci curvature. As applications, constant curvature manifolds, Einstein manifolds and Ricci parallel manifolds are identified, respectively, with different integral-differential formulas and semigroup inequalities. Moreover, by using derivative and Hessian formulas for the heat semigroup $P_t$ developed from stochastic analysis, explicit Hessian estimates are derived on Einstein and Ricci parallel manifolds.
The infimum of the Weyl functional is shown to be surprisingly small on many compact 4-manifolds that admit positive-scalar-curvature metrics. Results are also proved that systematically compare the scalar and self-dual Weyl curvatures of certain almost-Kaehler 4-manifolds.
This is a paper based on a talk given at the conference on Conformal Geometry which held at Roscoff in France in the 2008 summer. We study some aspects of the equation arising from the problem of the existence on a given closed Riemannian manifold of dimension at leat 4, of a conformal metric with constant $h_4$ curvature. We establish a simple formula relating the second Gauss-Bonnet curvature $h_4$ to the $σ_2$ curvature and we study some positivity properties of these two quadratic curvatures. We use different quadratic curvatures to characterize space forms, Einstein metrics and conformall…
In this work, we construct distance like functions with integral hessian bound on manifolds with small curvature concentration and use it to construct Ricci flows on manifolds with possibly unbounded curvature. As an application, we study the geometric structure of those manifolds without bounded curvature assumption. In particular, we show that manifolds with Ricci lower bound, non-negative scalar curvature, bounded entropy, Ahlfors $n$-regular and small curvature concentration are topologically Euclidean.
Almost-Kähler four manifolds with nonnegative biorthogonal curvature
本文对具有非负双正交曲率的紧致近凯勒四维流形进行了完整分类。
We obtained that any 2-form and any smooth function on 2-manifolds with boundary can be realized as the curvature form and the gaussian curvature function of some Riemmanian metric, respectively.
We study the pseudohermitian sectional curvature of a CR manifold.
In this paper we prove rigidity results on critical metrics for quadratic curvature functionals, involving the Ricci and the scalar curvature, on the space of Riemannian metrics with unit volume. It is well-known that Einstein metrics are always critical points. The purpose of this article is to show that, under some curvature conditions, a partial converse is true. In particular, for a class of quadratic curvature functionals, we prove that every critical metric with non-negative sectional curvature must be Einstein.
It is proved that if an AK2-manifold of dimension greater or equal to 6 is of pointwise constant antiholomorphic sectional curvature, then it is a 6-dimensional manifold of constant negative sectional curvature or a Kähler manifold of constant holomorphic sectional curvature.
We prove a mixed curvature analogue of Gromov's almost flat manifolds theorem for upper sectional and lower Bakry-Emery Ricci curvature bounds.
In this paper paraSasakian manifolds with a constant paraholomorphic section curvature are considered.
This paper is a survey on the structure of manifolds with a lower Ricci curvature bound.
In this paper, we study the interplay of geometry and positive scalar curvature on a complete, non-compact manifold with non-negative Ricci curvature. In three-dimensional manifold, we prove a minimal volume growth, an estimate of integral of scalar curvature and width. In higher dimensional manifold, we obtain a volume growth with a stronger condition.
This note is devoted to study the implications of nonpositive isotropic curvature and negative Ricci curvature for Einstein $4-$Manifolds.
In this paper, we study the integral curvatures of Finsler manifolds and prove several Myers type theorems.
We prove a sharp Sobolev inequality on manifolds with nonnegative Ricci curvature. Moreover, we prove a Michael-Simon inequality for submanifolds in manifolds with nonnegative sectional curvature. Both inequalities depend on the asymptotic volume ratio of the ambient manifold.
An identity of conformal-projective curvature tensor of a statistical manifold is studied in this paper. The relation between the constancy of curvature and conformal-projective flatness of statistical manifolds is also discussed.
In this note we classify compact 4-manifolds with harmonic Weyl tensor and nonnegative biorthogonal curvature
Riemannian metrics of positive Ricci curvature were constructed on certain moment-angle manifolds.
In this paper, we proved a compactness result about Riemannian manifolds with an arbitrary pointwisely pinched Ricci curvature tensor.
In this article we give necessary and sufficient conditions for an irreducible Kähler C-space with $b_2=1$ to have nonnegative or positive quadratic bisectional curvature, assuming the space is not Hermitian symmetric. In the cases of the five exceptional Lie groups $E_6, E_7, E_8, F_4, G_2$, the computer package MAPLE is used to assist our calculations. The results are related to two conjectures of Li-Wu-Zheng.
For k at least 2, we exhibit complete k-curvature homogeneous neutral signature pseudo-Riemannian manifolds which are not locally affine homogeneous (and hence not locally homogeneous). The curvature tensor of these manifolds is modeled on that of an indecomposible symmetric space. All the local scalar Weyl curvature invariants of these manifolds vanish.
In this paper we prove a compactness theorem for constant mean curvature surfaces with area and genus bound in three manifold with positive Ricci curvature. As an application, we give a lower bound of first eigenvalue of constant mean curvature surfaces in three manifold with positive Ricci curvature.
For any k which is at least 2, we exhibit complete k-curvature homogeneous neutral signature pseudo-Riemannian manifolds which are not k+1-affine curvature homogeneous, and hence not locally homogeneous. All the local scalar Weyl invariants of these manifolds vanish. These manifolds are Ricci flat, Osserman, and Ivanov-Petrova.
Compact four-manifolds with pinched self-dual Weyl curvature
本文研究了具有调和自双曲Weyl曲率和挤压条件的紧致四流形的性质。
We will show that a statistical manifold $(M, g, \nabla)$ has a constant curvature if and only if it is a projectively flat conjugate symmetric manifold, that is, the affine connection $\nabla$ is projectively flat and the curvatures satisfies $R=R^*$, where $R^*$ is the curvature of the dual connection $\nabla^*$. Moreover, we will show that properly convex structures on a projectively flat compact manifold induces constant curvature $-1$ statistical structures and vice versa.
We draw elliptic regularity results for 4-manifolds with an elliptic system, without Sobolev constant control. Direct use of analysis is circumvented; the results come mainly through geometric and topological arguments. In contrast to our previous paper, which worked predominantly on the scale of the curvature radius, the results here provide curvature controls on a fixed scale.
On stability and scalar curvature rigidity of quaternion-Kähler manifolds
本文证明负标量曲率的四元数-凯勒流形作为爱因斯坦流形稳定且标量曲率刚性，并推广到特殊和乐情形，同时构造正标量曲率的半稳定但非刚性的反例。
We show any Weyl curvature model can be geometrically realized by a Weyl manifold
We study curvature identities on contact metric manifolds on the geometry of the corresponding almost Käehler cones, and we provide applications of the derived curvature identities.
Patterson discussed the curvature identities on Riemannian manifolds in [14], and a curvature identity for any 6-dimensional Riemannian manifold was independently derived from the Chern-Gauss-Bonnet Theorem [8]. In this paper, we provide the explicit formulae of Patterson's curvature identity that holds on 5-dimensional and 6-dimensional Einstein manifolds. We confirm that the curvature identities on the Einstein manifold from the previous work [8] are the same as the curvature identities deduced from Patterson's result. We also provide examples that support the theorems.
We derive a curvature identity that holds on any 6-dimensional Riemannian manifold, from the Chern-Gauss-Bonnet theorem for a 6-dimensional closed Riemannian manifold. We also introduce some applications of this curvature identity.
We show that every closed symplectic four-dimensional manifold admits compatible almost Kaehler metrics of negative scalar curvature.
Prescribed Chern scalar curvature on complete noncompact Hermitian manifolds with nonpositive curvatures
本文研究了在非正曲率的完整非紧赫尔米特流形上规定陈标量曲率的问题，得出了存在常数负陈标量曲率度量的充分条件。
Quaternionic-Kähler manifolds with nonnegative sectional curvature
本文证明具有正数量曲率和非负截面曲率的紧四元Kähler流形等距于对称空间，推广了Berger的经典定理。
In this paper, by introducing a notion of local quasi holomorphic frame, we obtain a curvature formula for almost Hermitian manifolds which is similar to that of Hermitian manifolds. Moreover, as applications of the curvature formula, we extend a result of H.S. Wu and a result of F. Zheng to almost Hermitian manifolds.
For the Bach-flat closed manifold with positive scalar curvature, we prove a rigidity result under a given inequality involving the Weyl curvature and the traceless Ricci curvature. Moveover, under an inequality involving $L^{\frac{n}{2}}$-norm of the Weyl curvature, the traceless Ricci curvature and the Yamabe invariant, we also provide a similar rigidity result. As an application, we obtain some rigidity results on 4-dimensional manifolds.
We first provide an alternative proof of the classical Weitzneböck formula for Einstein four-manifolds using Berger curvature decomposition, motivated by which we establish a unified framework for a Weitzenböck formula for a large class of canonical metrics on four-manifolds (or a Weitzenböck formula for "Einstein metrics" on four-dimensional smooth metric measure spaces). As applications, we classify Einstein four-manifolds of half two-nonnegative curvature operator, which in some sense provides a characterization of Kähler-Einstein metrics with positive scalar curvature on four-manifolds, we…
We present several problems and results relating the scalar curvatures of manifolds with mean curvatures of their boundaries
This is a survey of recent results on manifolds with positive curvature from a series of lecture given in Guanajuato, Mexico in 2010. It also contains some hitsorical comments.
The aim of this paper is to classify compact Kahler manifolds with quasi-constant holomorphic sectional curvature.
We extend results of Llarull and Goette-Semmelmann to manifolds with boundary.
扫码添加微信好友，提出您的宝贵建议 👇
💡 备注请填写：网站反馈
发表机构由 AI 从论文文本抽取，如发现错误，欢迎反馈修正建议。