Full-potential gradient corrected density functional calculations of the adsorption of potassium on the Ag(111) surface have been performed. The considered structures are Ag(111) (root 3 x root 3) R30degree-K and Ag(111) (2 x 2)-K. For the lower coverage, fcc, hcp and bridge site; and for the higher coverage all considered sites are practically degenerate.
Substrate rumpling is most important for the top adsorption site. The bond length is found to be nearly identical for the two coverages, in agreement with recent experiments. Results from Mulliken populations, bond lengths, core level shifts and work functions consistently indicate a small charge transfer from the potassium atom to the substrate, which is slightly larger for the lower coverage.
The adsorption of CO on the Pt(111) surface in a root3 x root3 pattern has been studied with the gradient corrected functional of Perdew and Wang and the B3LYP hybrid functional. A slab which is periodic in two dimensions is used to model the system. The Perdew-Wang functional incorrectly gives the fcc site as the most favorable adsorption site, in accord with a set of previous studies. The B3LYP functional gives the top site as the preferred site. This confirms results from cluster studies where it was suggested that the different splitting, dependent on the functional, between highest occupi…
The adsorption of potassium on the Cu(111) surface in a 2x2 pattern has been simulated with all-electron full-potential density functional calculations. The top site is found to be the preferred adsorption site, with the other highly symmetric adsorption sites being nearly degenerate. The bond length from potassium to the nearest copper atom is computed to be 2.83 Angstrom. Population analysis and density of states indicate that there is no evidence for covalent bonding so that the binding mechanism appears to be a metallic bond.
Defect is no longer deemed an adverse aspect of graphene. Contrarily, it can pave ways of extending applicability of graphene. Here, we discuss the effects of three types of defects on graphene: carbon deficiency, adatom (single Fe) dopant and introduction of functional groups (carboxyl, pyran group) on NO2 gas adsorption via density functional theory method. We have observed that the unsaturated carbon in defected graphene is highly active to attract NO2 molecules. Our study suggests that introducing Fe on graphene can enhance the NO2 adsorption process. Adsorption energy calculations suggest…
The adsorption of benzene on the Si(100) surface is studied theoretically using the self-consistent van der Waals density functional (vdW-DF) method. The adsorption energies of two competing adsorption structures, butterfly (BF) and tight-bridge (TB) structures, are calculated with several vdW-DFs at saturation coverage. Our results show that recently proposed vdW-DFs with high accuracy all prefer TB to BF, in accord with more accurate calculations based on exact exchange and correlation within the random phase approximation. Detailed analyses reveal the important roles played by the molecule-…
The adsorption of 1,4-benzenediamine (BDA) on the Au(111) surface and azobenzene on the Ag(111) surface is investigated using density functional theory (DFT) with a non-local density functional (vdW-DF) and a semi-local Perdew-Burke-Ernzerhof (PBE) functional. For BDA on Au(111), the inclusion of London dispersion interactions not only dramatically enhances the molecule-substrate binding, resulting in adsorption energies consistent with experimental results, but also significantly alters the BDA binding geometry. For azobenzene on Ag(111), the vdW-DF produces superior adsorption energies compa…
Adsorption of $O_{2}$ molecule on Al surface has been a long standing puzzle for the first principles calculation. We have studied the adsorption of $O_{2}$ molecule on the Al(111) surface using hybrid functionals. In contrast to the previous LDA/GGA, the present calculations with hybrid functionals successfully predict that $O_{2}$ molecule can be absorbed on the Al(111) surface with a barrier around 0.2$\thicksim$0.4 eV, which is in good agreement with experiments. Our calculations predict that the LUMO of $O_{2}$ molecule is higher than the Fermi level of the Al(111) surface, which is respo…
We investigate the adsorption of chlorine on the Cu(111) surface with full potential all-electron density functional calculations. Chlorine adsorption at the fcc hollow sites is slightly preferred over that at the hcp hollow. The adsorption geometry is in excellent agreement with electron diffraction and ion scattering data. Adsorption energies and surface diffusion barriers are close to those deduced from experiment.
We present a detailed study of the adsorption of CO on Cu, Rh, and Pt (111) surfaces in top and hollow sites. The study has been performed using the local density approximation, the gradient corrected functional PBE, and the hybrid Hartree-Fock density functionals PBE0 and HSE03 within the framework of generalized Kohn-Sham density functional theory using a plane-wave basis set. As expected, the LDA and GGA functionals show a tendency to favor the hollow sites, at variance with experimental findings that give the top site as the most stable adsorption site. The PBE0 and HSE03 functionals reduc…
Atomic oxygen adsorption on the Mo(112) surface has been investigated by means of first-principles total energy calculations. Among the variety of possible adsorption sites it was found that the bridge sites between two Mo atoms of the topmost row are favored for O adsorption at low and medium coverages. At about one monolayer coverage oxygen atoms prefer to adsorb in a quasi-threefold hollow sites coordinated by two first-layer Mo atoms and one second layer atom. The stability of a structural model for an oxygen-induced $p(2\times 3)$ reconstruction of the missing-row type is examined.
We present the results of ab initio calculations describing the adsorption of certain small organic molecules on clean and oxidized Al(111) surfaces as well as on the alpha-Al2O3(0001) surface. Our results show that adsorption of benzene on the clean and oxidized Al(111) surfaces is generally weak, the adsorption energy being at most around -0.5 eV per benzene molecule, and the molecule adsorbed at a considerable distance from the surfaces. The adsorption energy varies weakly at the different adsorption sites and as a function of the oxygen coverage. For the alumina surface, we find no benzene…
It is shown that it is now possible to include van der Waals interactions via a nonempirical implementation of density functional theory to describe the correlation energy in electronic structure calculations on infinite systems of no particular symmetry. The vdW-DF functional [Phys. Rev. Lett. 92, 246401 (2004)] is applied to the adsorption of benzene and naphthalene on an infinite sheet of graphite, as well as the binding between two graphite sheets. Comparison with recent thermal desorption data [Phys. Rev. B 69, 535406 (2004)] shows great promise for the vdW-DF method.
Our ab initio calculations of CO adsorption energies on low miller index (111), (100), stepped (211), and kinked (532) gold surfaces show a strong dependence on local coordination with a reduction in Au atom coordination leading to higher binding energies. We find trends in adsorption energies to be similar to those reported in experiments and calculations for other metal surfaces. The (532) surface provides insights into these trends because of the availability of a large number of kink sites which naturally have the lowest coordination (6). We also find that, for all surfaces, an increase in…
We present a density-functional theory study addressing the on-surface adsorption of oxygen at the Pd(11N) (N =3,5,7) vicinal surfaces, which exhibit (111) steps and (100) terraces of increasing width. We find the binding to be predominantly governed by the local coordination at the adsorption site. This leads to very similar bonding properties at the threefold step sites of all three vicinal surfaces, while the binding at the central fourfold hollow site in the four atomic row terrace of Pd(117) is already very little disturbed by the presence of the neighboring steps.
Using first-principles calculations, we systematically study the adsorption behavior of a single molecular H$_{2}$O on the Be(0001) surface. We find that the favored molecular adsorption site is the top site with an adsorption energy of about 0.3 eV, together with the detailed electronic structure analysis, suggesting a weak binding strength of the H$_{2}$O/Be(0001) surface. The adsorption interaction is mainly contributed by the overlapping between the $s$ and $p_{z}$ states of the top-layer Be atom and the molecular orbitals 1$b_{1}$ and 3$a_{1}$ of H$_{2}$O. The activation energy for H$_{2}…
Chemical adsorption of the species at semiconductor surfaces is analyzed showing the existence of the two contributions to adsorption energy: bond creation and charge transfer. It is shown that the energy of quantum surface states is affected by the electric field at the surface, nevertheless the potential contribution of electron and nuclei cancels out. The charge transfer contribution is Fermi level independent for pinned surfaces. Thus for Fermi level pinned at the surface, the adsorption energy is independent on the Fermi energy i.e. the doping in the bulk. The DFT simulations of adsorptio…
We study the adsorption behavior of Ga on (0001) GaN surfaces combining experimental specular reflection high-energy electron diffraction with theoretical investigations in the framework of a kinetic model for adsorption and ab initio calculations of energy parameters. The measurement of a Ga/GaN adsorption isotherm allows the quantification of the equilibrium Ga surface coverage as a function of the impinging Ga flux. The temperature dependence is discussed within an {\em ab initio} based growth model for adsorption taking into account the nucleation of Ga clusters.
The interaction of water molecules with metal surfaces is typically weak and as a result van der Waals (vdW) forces can be expected to be of importance. Here we account for the systematic poor treatment of vdW forces in most popular density functional theory (DFT) exchange-correlation functionals by applying accurate non-local vdW density functionals. We have computed the adsorption of a variety of exemplar systems including water monomer adsorption on Al(111), Cu(111), Cu(110), Ru(0001), Rh(111), Pd(111), Ag(111), Pt(111), and unreconstructed Au(111), and small clusters (up to 6 waters) on Cu…
A calculational study of the trihalomethanes chloroform (CHCl_3) and bromoform (CHBr_3) adsorbed on graphene is presented. The study uses the van der Waals density functional method vdW-DF to obtain adsorption energies and adsorption structures for these molecules of environmental concern. In this study chloroform is found to adsorb with the H atom pointing away from graphene, with adsorption energy 357 meV (34.4 kJ/mol). For bromoform the calculated adsorption energy is 404 meV (39.0 kJ/mol). The corrugation of graphene as seen by chloroform is small, the difference in adsorption energy along…
The adsorption of oxygen on the Ag(001) is investigated by means of density functional techniques. Starting from a characterization of the clean silver surfaces oxygen adsorption in several modifications (molecularly, on-surface, sub-surface, Ag$_2$O) for varying coverage was studied. Besides structural parameters and adsorption energies also work-function changes, vibrational frequencies and core level energies were calculated for a better characterization of the adsorption structures and an easier comparison to the rich experimental data.
Understanding surface reactivity is crucial in many fields, going from heterogeneous catalysis to materials oxidation and corrosion. In order to decipher the surface reactions of ZrB2 exposed to the harsh environment of aerospace components, the chemical activity of both Zr- and B-surfaces is predicted and compared by using density functional theory and nudged elastic band methods. In particular the adsorption, dissociation and diffusion of O2, CO and H2O are extensively examined through the calculation of surface adsorption energies and reaction pathways. We find the dissociative adsorption o…
Understanding the interaction of organic molecules with TiO2 surfaces is important for a wide range of technological applications. While density functional theory (DFT) calculations can provide valuable insight about these interactions, traditional DFT approaches with local exchange-correlation functionals suffer from a poor description of non-bonding van der Waals (vdW) interactions. We examine here the contribution of vdW forces to the interaction of small organic molecules (methane, methanol, formic acid and glycine) with the TiO2 (110) surface, based on DFT calculations with the optB88-vdW…
A study of the adsorption of CO on late 4d and $5d$ transition metal (111) surfaces (Ru, Rh, Pd, Ag, Os, Ir, and Pt) considering atop and hollow site adsorption is presented. The applied functionals include the gradient corrected PBE and BLYP functional, and the corresponding hybrid Hartree-Fock density functionals HSE and B3LYP. We find that PBE based hybrid functionals (specifically HSE) yield, with the exception of Pt, the correct site order on all considered metals, but they also considerably overestimate the adsorption energies compared to experiment. On the other hand, the semi-local BLY…
It is shown that adsorption energy at semiconductor surfaces critically depends on the charge transfer to or from the adsorbed species. For the processes without the charge transfer, such as molecular adsorption of closed shell systems, the adsorption energy is determined by the bonding only. In the case involving charge transfer, such as open shell systems like metal atoms or the dissociating molecules, the energy attains different value for the Fermi level differently pinned. The DFT simulation of adsorption of ammonia at hydrogen covered GaN(0001) confirms these predictions: the molecular a…
Surface adsorption, which is often coupled with surface dissolution, is generally unpredictable on alloys due to the complicated alloying and dissolution effects. Herein, we introduce the electronic gradient and cohesive properties of surface sites to characterize the effects of alloying and dissolution. This enables us to build a predictive model for the quantitative determination of the adsorption energy in dissolution, which holds well for transition metals, near-surface alloys, binary alloys, and high-entropy alloys. Furthermore, this model uncovers a synergistic mechanism between the d-ba…
Hydrocarbon tribopolymer, a type of polymer formed due to friction between surfaces, is a major impediment to the development of micro- and nanoelectromechanical systems (MEMS/NEMS) devices for industrial application. Tribopolymer buildup can prevent MEMS and NEMS from making or breaking electrical contact. We describe the adsorption of benzene (C6H6) on the RuO2(110) surface using density functional theory. This adsorption is an important initial step in the mechanism of hydrocarbon tribopolymer layer formation on MEMS and NEMS devices. The adsorption interaction is studied by considering thr…
We investigate adsorption of a gas on the flat surface of a solid deformable adsorbent taking into account thermal fluctuations and analyze in detail the effect of thermal fluctuations on the adsorbent deformation in adsorption. The condition for coexistence of two states of a bistable system of adsorbed particles is derived. We establish the specific properties of the adsorption-induced surface normal relaxation of an adsorbent caused by thermal fluctuations. The mean transition times between two stable states of the bistable system are derived in the parabolic approximation and in the genera…
Halogenated aromatic molecules assemble on surfaces forming both hydrogen and halogen bonds. Even though these systems have been intensively studied on flat metal surfaces, high-index vicinal surfaces remain challenging, as they may induce complex adsorbate structures. The adsorption of 2,6-dibromoanthraquinone (2,6-DBAQ) on flat and stepped gold surfaces is studied by means of van der Waals corrected density functional theory. Equilibrium geometries and corresponding adsorption energies are systematically investigated for various different adsorption configurations.~It is shown that bridge si…
We present a first-principles computational study of non-polar ZnO (10$\bar{1}$0) surfaces doped with indium. The calculations were performed using a model ZnO slab. The position of the In dopants was varied from deep bulk-like layers to the surface layers. It was established that the preferential location of the In atoms is at the surface by examining the dependence of the defect formation energy as well as the surface energy on In location. The adsorption sites on the surface of ZnO and the energy of adsorption of CO molecules and OH-species were determined in connection to In doping. It was…
The scaling relationships between the adsorption energies of different reaction intermediates have a tremendous effect in the field of surface science, particularly in predicting new catalytic materials. In the last few decades, these scaling laws have been extensively studied and interpreted by a number of research groups which makes them almost universally accepted. In this work, we report the breakdown of the standard scaling law in bimetallic transition metal (TM) magnetic surfaces for O and OH adsorbates, where adsorption energies are estimated using density functional theory (DFT).We pro…
Adsorption of ammonia at NH3/NH2/H covered GaN(0001) surface was analyzed using results of ab initio calculations. The whole configuration space of partially NH3/NH2/H covered GaN(0001) surface was divided into zones differently pinned Fermi level: at Ga broken bond state for dominantly bare surface (region I), at VBM for NH2 and H covered (region II), and at CBM for NH3 covered surface (region III). The extensive ab intio calculations show validity of electron counting rule (ECR) for all mixed coverage, for bordering these three regions. The adsorption was analyzed using newly identified depe…
Molecular adsorption on surfaces is a key element for many applications, including sensing and catalysis. Non-invasive sugar sensing has been an active area of research due to its importance to diabetes care. The adsorption of sugars on a template surface study is at the heart of matter. Here, we study doped hexagonal boron nitride sheets ($h$-BNNs) as adsorbing and sensing template for glucose and glucosamine. Using first principles calculations, we find that the adsorption of glucose and glucosamine on $h$-BNNs is significantly enhanced by the substitutional doping of the sheet with Al and G…
Surface energy is fundamental in controlling surface properties and surface-driven processes like heterogeneous catalysis, as adsorption energy is. It is thus crucial to establish an effective scheme to determine surface energy and its relation with adsorption energy. Herein, we propose a model to quantify the effects of the intrinsic characteristics of materials on the material-dependent property and anisotropy of surface energy, based on the period number and group number of bulk atoms, and the valence-electron number, electronegativity and coordination of surface atoms. Our scheme holds for…
Contents: 5.1 Introduction 5.2 Concepts and definitions 5.3 The tight-binding picture of bonding 5.4 Adsorption of isolated adatoms 5.5 Alkali-metal adsorption: the traditional picture of on-surface adsorption 5.6 Substitutional adsorption and formation of surface alloys 5.7 Adsorption of CO on transition-metal surfaces - a model system for a simple molecular adsorbate 5.8 Co-adsorption [the example CO plus O on Ru(0001)] 5.9 Chemical reactions at metal surfaces 5.10 The catalytic oxidation of CO 5.11 Summary outline of main points
Only recently, the activation of oxygen molecules on clean defect-free transition metal oxide surfaces has been reported, for example on the CaO-terminated surface of the Ruddelsden-Popper perovskite \crosurf. In this work we show that oxygen molecules adsorb as an activated superoxo species on a clean SrO-terminated surface of \srosurf. At all coverages, the electrons activating the molecule originate from the subsurface RuO$_2$ layer. At low coverages, the presence of a Ca dopant in the terminating SrO layer slightly increases the adsorption energy. At high coverage, DFT predicts a flat pote…
The adsorption and diffusion of H atoms on beta-PtO2(001) surface have been studied using first-principles calculations. The chemisorbed H atoms are found to bind preferentially on the top sites of O atoms due to the much larger adsorption energies with comparison to adsorption atop Pt atoms. The calculated energy barriers along the optimal diffusion paths are comparable with that of H diffusion on Pt(111). Within the WKB approximation, the nuclear quantum effects (NQEs) along the diffusion paths are investigated. It turns out that the NQEs are significant for the surface diffusion of H at roo…
Chemical bonds formed by hydrazine-sulfide treatment of GaAs(111) were studied by synchrotron photoemission spectroscopy. At the B surface, the top arsenic atoms are replaced by nitrogen atoms, while GaAs(111)A is covered by sulfur, also bonded to underlying gallium, despite the sulfide molar concentration being 103 times smaller than that of the hydrazine. This extreme dependence on surface polarity is explained by competitive adsorption processes of HS- and OH- anions and of hydrazine molecules, on Ga- adsorption sites, which have distinct configurations on the A and B surfaces.
We study the adsorption of chlorine on the Ag(111) surface with full potential gradient corrected density functional calculations. When considering a root3 x root3 R30degree pattern, we find that the fcc hollow is the most favorable adsorption site. We obtain an Ag-Cl bond length of 2.62 Angstrom which is intermediate between two controversial experimental results. We discuss the differences of core level energies and densities of states for the different adsorption sites. We find the Cl-Ag interaction to be more consistent with an ionic, rather than covalent, picture of the bonding. In additi…
We present a comparative Density Functional Theory (DFT) and Density Functional Tight Binding (DFTB) study of geometries and electronic structures of arginine (Arg), arginine adsorbed on the anatase (101) surface of titania in several adsorption configurations, and of an arginine-rich cell penetrating peptide TAT and its adsorption on the surface of TiO2. Two DFTB parameterizations are considered, tiorg-0-1/mio-1-1 and matsci-0-3. While there is good agreement in the structures and relative energies of Arg and peptide conformers between DFT and DFTB, both adsorption geometries and energies are…
Adsorption of carbon monoxide (CO) on transition-metal surfaces is a prototypical process in surface sciences and catalysis. Despite its simplicity, it has posed great challenges to theoretical modeling. Pretty much all existing density functionals fail to accurately describe surface energies, CO adsorption site preference, as well as adsorption energies simultaneously. Although the random phase approximation (RPA) cures these density functional theory failures, its large computational cost makes it prohibitive to study the CO adsorption for any but the simplest ordered cases. Here, we address…
We present a comprehensive density-functional theory study addressing the adsorption, dissociation and successive diffusion of water molecules on the two regular terminations of SrTiO3(001). Combining the obtained supercell-geometry converged energetics within a first-principles thermodynamics framework we are able to reproduce the experimentally observed hydroxilation of the SrO-termination already at lowest background humidity, whereas the TiO2-termination stays free of water molecules in the regime of low water partial pressures. This different behavior is traced back to the effortless form…
This study explores atomic and molecular adsorption on a number of early transition-metal carbides (TMC's) by means of density-functional theory calculations. Trend studies are conducted with respect to both period and group in the periodic table, choosing the substrates ScC, TiC, VC, ZrC, NbC, delta-MoC, TaC, and WC and the adsorbates H, B, C, N, O, F, NH, NH2, and NH3. Trends in adsorption strength are explained in terms of surface electronic factors, by correlating the calculated adsorption energy values with the calculated surface electronic structures. The results are rationalized with us…
Adsorption of a molecule or group with an atom which is less electronegative than oxygen (O) and directly interacting with the surface is very relevant to development of PtM (M=3d-transition metal) catalysts with high activity. Here, we present theoretical analysis of the adsorption of NH3 molecule (N being less electronegative than O) on (111) surfaces of PtM(Fe,Co,Ni) alloys using the first principles density functional approach. We find that, while NH3-Pt interaction is stronger than that of NH3 with the elemental M-surfaces, it is weaker than the strength of interaction of NH3 with M-site …
First-principles calculations are performed to study the adsorption and dehydrogenation of ethylene on PdAu(001) bimetallic surfaces. The activation energies for C-H bond breaking of ethylene strongly depend on the ensemble effect. Particularly, ethylene is unlikely to decompose on the most popular ensembles of PdAu(001), Pd monomers or Pd second neighborhoods, since the Pd-Au bridges are less attractive towards vinyl and the eliminated H atom than the Pd-Pd bridges in the transition state. Correlations are found among the activation energies, reaction energies and adsorption energies, but no …
The adsorption and dissociation of nitrogen molecule on Fe(111) surface is studied by density functional theory calculations. The simulation results show that the molecule needs to acquire parallel orientation with respect to the surface for the adsorption and dissociation. In addition, Fe(111) surface is more active in dissociating N2 than Fe(100) surface due to its morphology. The interaction between antibonding molecular orbitals of N2 and partially filled $3d$ orbitals of Fe atoms on the surface may be the key to the molecular dissociation of N2. To break down the triple bond of N2, the el…
CO2 chemisorption on SrTiO3(001) surfaces is studied using ab initio calculations in order to establish new chemical sensing mechanisms. We find that CO2 adsorption opens the material band gap, however, while the adsorption on the TiO2-terminated surface neutralizes surface states at the valence band (VB) maximum, CO2 on the SrO-terminated surfaces suppresses the conduction band (CB) minimum. For the TiO2-terminated surface, the effect is explained by the passivation of dangling bonds, whereas for the SrO-terminated surface, the suppression is caused by the surface relaxation. Modulation of th…
We report a computational study of the adsorption of zoledronic acid molecule on hydroxyapatite (001) surface within ab initio density functional theory. The systematic study has been performed, from hydroxyapatite bulk and surface, and zoledronic acid molecule to the adsorption of the molecule on the surface. The optimized bond lengths and bond angles were obtained and analyzed, giving an evidence of structural similarity between subjects under study. The formation energies of hydroxyapatite (001) surfaces with two kinds of terminations were computed as about 1.2 and 1.5 J/m^2 with detailed a…
The adsorption of MgO molecules on a Fe(001) surface was studied using density functional theory (DFT) and projector augmented wave methods. The energetically most favored configurations for different adsorption sites considered were identified. The most preferable adsorption geometry is when the MgO molecules are parallel to the surface, with Mg in the interstitial site and O in on-top of the Fe atom. During the adsorption of subsequent MgO molecules in this geometry, a sharp, non-oxidized interface is formed between the MgO adlayer and Fe(001) surface. The adsorption of MgO perpendicular to …
In the context of glass fiber manufacturing the onset of lubrication by a C18 double-chained cationic surfactant has been investigated at high normal contact pressures. Comparison with adsorption kinetics demonstrates that lubrication is not directly connected to the surfactant surface excess but originates from the transition to a defect-free bilayer which generates limited dissipation. The impact of ionic strength and shear rate has also been studied.
We propose a self-consistent model taking into account variations in adsorption properties of the adsorbent surface in the process of adsorption--desorption of molecules of gas on it. We introduce a dimensionless coupling parameter that characterizes the interaction of an adsorbed molecule with polarized medium. It is established that the system can be bistable if the coupling parameter is greater than a critical value and the concentration of gas belongs to a certain interval. We show that the adsorption isotherms obtained within the framework of the proposed model essentially differ from the…
The adsorption of an adenine molecule on graphene is studied using a first-principles van der Waals functional (vdW-DF) [Dion et al., Phys. Rev. Lett. 92, 246401 (2004)]. The cohesive energy of an ordered adenine overlayer is also estimated. For the adsorption of a single molecule, we determine the optimal binding configuration and adsorption energy by translating and rotating the molecule. The adsorption energy for a single molecule of adenine is found to be 711 meV, which is close to the calculated adsorption energy of the similar-sized naphthalene. Based on the single molecular binding conf…
The adsorption properties of isolated H$_{2}$O molecule on stoichiometric and reduced (with on-surface oxygen vacancy) ceria(1111) surfaces at low coverage are theoretically investigated by using density-functional-theory+\emph{U} calculations and \textit{ab initio} molecular dynamics simulations. We identify the most stable adsorption configurations on these two kinds of surfaces, which form two hydrogen bonds between the water molecule and the oxide surface. The electronic structures indicate that the hybridization of the molecular orbitals of water and surface-layer O-2\emph{p} states domin…
Exploring the role of van der Waals (vdW) forces on the adsorption of molecules on extended metal surfaces has become possible in recent years thanks to exciting developments in density functional theory (DFT). Among these newly developed vdW-inclusive methods, interatomic vdW approaches that account for the nonlocal screening within the bulk [V. G. Ruiz, W. Liu, E. Zojer, M. Scheffler, and A. Tkatchenko, Phys. Rev. Lett. 108, 146103 (2012)] and improved nonlocal functionals [J. Klimes, D. R. Bowler, and A. Michaelides, J. Phys.: Condens. Matter 22, 022201(2010)] have emerged as promising cand…
In this work, we have studied theoretically the effects of gold adsorption on the Al(001) surface, using {\it ab initio} pseudo-potential method in the framework of the density functional theory. Having found the hollow sites at the Al(001) surface as the most preferred adsorption sites, we have investigated the effects of the Au adsorption with different coverages ($Θ$=0.11, 0.25, 0.50, 0.75, 1.00 ML) on the geometry, adsorption energy, surface dipole moment, and the work-function of the Al(001) surface. The results show that, even though the work-function of the Al substrate increases with t…
Van der Waals (vdW) forces play a fundamental role in the structure and behavior of diverse systems. Thanks to development of functionals that include non-local correlation, it is possible to study the effects of vdW interactions in systems of industrial and tribological interest. Here we simulated within the framework of density functional theory (DFT) the adsorption of isooctane (2,2,4-trimethylpentane) and ethanol on a Fe(100) surface, employing various exchange-correlation functionals to take vdW forces into account. In particular, this paper discusses the effect of vdW forces on the magni…
The adsorption of rare gases on metal surfaces serve as the paradigm of weak adsorption where it is typically assumed that the adsorbate occupies maximally coordinated hollow sites. Density-functional theory calculations using the full-potential linearized augmented plane wave method for Xe adatoms on Mg(0001), Al(111), Ti(0001), Cu(111), Pd(111), and Pt(111), show, however, that Xe prefers low-coordination on-top sites in all cases. We identify the importance of polarization and a site-dependent Pauli repulsion in actuating the site preference and the principle nature of the rare-gas atom--me…
The ability of metal adsorption to transfer charge to the surface of single molecular carbon sheets is explored in this paper. Though other metals are considered we basically will deal with Lithium We concentrate on fairly small sheets and examined the minimum threshold size of a molecular surface needed to separate metals. From our quantum chemical calculations we deduce that a molecular surface of six benzene rings is needed for Lithium dimers to be separated. We further observe symmetry breaking, when two lithium atoms are adsorbed right opposite to each other on the two sides of the sheet.
We have studied the adsorption of NO, and the coadsorption of N and O, on four physical and hypothetical systems: unstrained and strained Rh(100) surfaces and monolayers of Rh atoms on strained and unstrained MgO(100) surfaces. We find that as we go from Rh(100) to Rh/Mg0(100), via the other two hypothetical systems, the effective coordination progressively decreases, the $d$-band narrows and its center shifts closer to the Fermi level, and the strength of adsorption and co-adsorption increases. Both strain and the presence of the oxide substrate contribute significantly to this. However, char…
We present and discuss the results of ab initio DFT plane-wave supercell calculations of the atomic and molecular oxygen adsorption and diffusion on the LaMnO3 (001) surface which serves as a model material for a cathode of solid oxide fuel cells. The dissociative adsorption of O2 molecules from the gas phase is energetically favorable on surface Mn ions even on a defect-free surface. The surface migration energy for adsorbed O ions is found to be quite high, 1.6 eV. We predict that the adsorbed O atoms could penetrate into electrode first plane when much more mobile surface oxygen vacancies (…
