arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2304.05326cs.AR
收藏

面向FPGA架构功耗表征以利用微基准实现开源功耗估计

Towards Power Characterization of FPGA Architectures To Enable Open-Source Power Estimation Using Micro-Benchmarks

Stefan Riesenberger, Christian Krieg

AI总结:

本文提出利用通用微基准对FPGA目标技术进行功耗表征的方法,并在Lattice iCE40上演示了LUT实例化和环形振荡器两种微基准生成方式及三种激励测试方法,初步验证了可变功耗引入能力,但灵敏度尚不足以建立有效的功耗估计模型。

摘要:

尽管过去十年间开源综合与验证工具及流程取得了显著进展,但开源设计自动化生态系统中仍缺少一个环节:一种用于估计设计在特定目标技术上功耗的工具。我们讨论一种正在进行中的方法,该方法使用通用微基准来表征目标技术,其结果可用于建立这些目标技术的功耗模型。这些模型可进一步用于预测设计在给定使用场景下的功耗(目前尚不在研究范围内)。我们在公开文档化的Lattice iCE40 FPGA技术上演示了我们的表征方法,并讨论了两种生成在目标器件中消耗功耗的微基准的方法:简单的查找表(LUT)实例化,以及更复杂的环形振荡器实例化。我们研究了三种在硬件中激励所实现微基准的方法:Verilog测试平台、微控制器测试平台以及基于伪随机线性反馈移位寄存器(LFSR)的测试。我们测量了被激励目标器件的功耗。我们的最终目标是实现技术表征的功耗测量自动化;目前,我们使用示波器在三个分流电阻处手动测量消耗的功耗。初步结果表明,我们能够在目标器件中引入可变的功耗;然而,功耗表征的灵敏度仍然过低,尚不足以建立具有表达能力的功耗估计模型。

英文摘要:

While in the past decade there has been significant progress in open-source synthesis and verification tools and flows, one piece is still missing in the open-source design automation ecosystem: a tool to estimate the power consumption of a design on specific target technologies. We discuss a work-in-progress method to characterize target technologies using generic micro-benchmarks, whose results can be used to establish power models of these target technologies. These models can further be used to predict the power consumption of a design in a given use case scenario (which is currently out of scope). We demonstrate our characterization method on the publicly documented Lattice iCE40 FPGA technology, and discuss two approaches to generating micro-benchmarks which consume power in the target device: simple lookup table (LUT) instantiation, and a more sophisticated instantiation of ring oscillators. We study three approaches to stimulate the implemented micro-benchmarks in hardware: Verilog testbenches, micro-controller testbenches, and pseudo-random linear-feedback-shift-register-(LFSR)-based testing. We measure the power consumption of the stimulated target devices. Our ultimate goal is to automate power measurements for technology characterization; Currently, we manually measure the consumed power at three shunt resistors using an oscilloscope. Preliminary results indicate that we are able to induce variable power consumption in target devices; However, the sensitivity of the power characterization is still too low to build expressive power estimation models.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑