Large-scale models of nuclear structure are currently the only way to provide consistent datasets for the many properties of thousands of exotic nuclei that are required by nucleosynthesis simulations. In [W.Ryssens et al., Eur. Phys. J. A 58, 246 (2022)], we recently presented the new BSkG2 model based on an energy density functional of the Skyrme type. Relying on a flexible three-dimensional coordinate representation of the nucleus, the model takes into account both triaxial deformation and time-reversal symmetry breaking. BSkG2 achieves a state-of-the-art global description of nuclear ground state (g.s.) properties and reproduces in particular the known masses with a root-mean-square (rms) deviation of 678 keV. Moving beyond g.s. properties, the model also reproduces all empirical values for the primary and secondary barriers as well as isomer excitation energies of actinide nuclei with rms deviations below 500 keV, i.e. with unprecedented accuracy. Here we discuss in detail the extension of our framework to the calculation of the fission barriers of 45 actinide nuclei, including odd-mass and odd-odd systems. We focus in particular on the impact of symmetry breaking which is key to the accuracy of the model: we allow systematically for axial, reflection and time-reversal symmetry breaking. The effect of the latter on the fission properties of odd-mass and odd-odd nuclei is small, but we find that allowing for shapes with triaxial or octupole deformation, as well as shapes with both, is crucial to achieving this accuracy. The numerical accuracy of our coordinate space approach, the variety of nuclear configurations explored and the simultaneous successful description of fission properties and known masses makes BSkG2 the tool of choice for the large-scale study of nuclear structure.
Spontaneous-fission properties of 256Fm, 258Fm, and 260Fm isotopes are studied within the Skyrme-Hartree-Fock+BCS framework. In the particle-hole channel we take the Skyrme SkM* effective force, while in the particle-particle channel we employ the seniority pairing interaction. Three static fission paths for all investigated heavy fermium isotopes are found. The analysis of these fission modes allows to describe observed asymmetric fission of 256Fm, as well as bimodal fission of 258Fm and symmetric fission in 260Fm.
Fission-related phenomena of heavy $Λ$ hypernuclei are discussed with the constraint Skyrme-Hartree-Fock+BCS (SHF+BCS) method, in which a similar Skyrme-type interaction is employed also for the interaction between a $Λ$ particle and a nucleon. Assuming that the $Λ$ particle adiabatically follows the fission motion, we discuss the fission barrier height of $^{239}_Λ$U. We find that the fission barrier height increases slightly when the $Λ$ particle occupies the lowest level. In this case, the $Λ$ particle is always attached to the heavier fission fragment. This indicates that one may produce h…
Spontaneous fission barriers, quadrupole inertia, and zero-point quadrupole-energy corrections are calculated for 252,256,258Fm in the framework of the self-consistent Skyrme-Hartree-Fock+BCS theory. Two ways of computing dynamical inertia are employed: the Gaussian Overlap Approximation to the Generator Coordinate Method and cranking ansatz. The Skyrme results are compared with those of the Gogny-Hartree-Fock-Bogolyubov model.
We present a large scale survey of life-times for spontaneous fission in the regime of super-heavy elements (SHE), i.e. nuclei with Z=104-122. This is done on the basis of the Skyrme-Hartree-Fock model. The axially symmetric fission path is computed using a quadrupole constraint. Self-consistent cranking is used for the collective masses and associated quantum corrections. The actual tunneling probability is estimated by the WKB approximation. Three typical Skyrme forces are used to explore the sensitivity of the results. Benchmarks in the regime Z=104-108 show an acceptable agreement. The gen…
Eighty years after its experimental discovery, a microscopic description of induced nuclear fission based solely on the interactions between neutrons and protons and quantum many-body methods still poses formidable challenges. The goal of this paper is to contribute to the development of a predictive microscopic framework for the accurate calculation of static properties of fission fragments for hot fission and thermal or slow neutrons. To this end, we focus on the 239Pu(n,f) reaction and employ nuclear density functional theory with Skyrme energy densities. Potential energy surfaces are compu…
Understanding the mechanisms of induced nuclear fission for a broad range of neutron energies could help resolve fundamental science issues, such as the formation of elements in the universe, but could have also a large impact on societal applications in energy production or nuclear waste management. The goal of this paper is to set up the foundations of a microscopic theory to study the static aspects of induced fission as a function of the excitation energy of the incident neutron, from thermal to fast neutrons. To account for the high excitation energy of the compound nucleus, we employ a s…
This is a short review of methods and results of calculations of fission barriers and fission half-lives of even-even superheavy nuclei. An approvable agreement of the following approaches is shown and discussed: The macroscopic-microscopic approach based on the stratagem of the shell correction to the liquid drop model and a vantage point of microscopic energy density functionals of Skyrme and Gogny type selfconsistently calculated within Hartree-Fock-Bogoliubov method. Mass parameters are calculated in the Hartree-Fock-Bogoliubov cranking approximation. A short part of the paper is devoted t…
We study the nuclear properties of even-even superheavy $Z$=120 isotopes and $N$=184 isotones with the Skyrme Hartree-Fock-Bogoliubov (HFB)approach. Within this model we examine the deformation energy surfaces and two paths to fission: a reflection-symmetric path with elongated fission fragments (sEF) and a reflection-asymmetric path corresponding to elongated fission fragments (aEF). Furthermore, we explore the energy surfaces in the region of very large oblate deformations with toroidal nuclear density distributions. While the energy surfaces of toroidal $Z$=120 isotopes and $N$=184 isotones…
We investigate the systematics of fission barriers in superheavy elements in the range Z = 108-120 and N = 166-182. Results from two self-consistent models for nuclear structure, the relativistic mean-field (RMF) model as well as the non-relativistic Skyrme-Hartree-Fock approach are compared and discussed. We restrict ourselves to axially symmetric shapes, which provides an upper bound on static fission barriers. We benchmark the predictive power of the models examining the barriers and fission isomers of selected heavy actinide nuclei for which data are available. For both actinides and super…
Models based on nuclear energy density functionals can provide access to a multitude of observables for thousands of nuclei in a single framework with microscopic foundations. Such models can rival the accuracy of more phenomenological approaches, but doing so requires adjusting parameters to thousands of nuclear masses. To keep such large-scale fits feasible, several symmetry restrictions are generally imposed on the nuclear configurations. One such example is time-reversal invariance, which is generally enforced via the Equal Filling Approximation (EFA). Here we lift this assumption, enablin…
The Skyrme nuclear energy density functional theory (DFT) is used to model neutron-induced fission in actinides. This paper focuses on the numerical implementation of the theory. In particular, it reports recent advances in DFT code development on leadership class computers, and presents a detailed analysis of the numerical accuracy of DFT solvers for near-scission calculations.
We report here the current developments on the Brussels-Skyrme-on-a-Grid (BSkG) atomic mass models. In comparison with our previous models, BSkG3 improves the infinite nuclear matter (INM) properties which opens its applications to neutron stars. The results presented here show that BSkG3 preserve the excellent agreement with experimental nuclear masses and radii, together with fission barriers of actinides obtained by BSkG1 and BSkG2, while the nuclear matter properties are considerably improved.
A shortlist of Skyrme force parameterizations, recently found to have passed a series of constraints relating to nuclear matter properties is analyzed for their ability to reproduce data in finite nuclei. We analyse binding energies, isotope shifts and fission barriers. We find that the subset of forces have no common ability to reproduce (or otherwise) properties of finite nuclei, despite passing the extensive range of nuclear matter constraints.
We discuss the fission barrier height of neutron-rich nuclei in a r-process site at highly excited state, which is resulted from the beta-decay or the neutron-capture processes. We particularly investigate the sensitivity of the fission barrier height to the temperature, including the effect of pairing phase transition from superfluid to normal fluid phases. To this end, we use the finite-temperature Skyrme-Hartree-Fock-Bogolubov method with a zero-range pairing interaction. We also discuss the temperature dependence of the fission decay rate.
We review the prediction of fission properties of super-heavy elements (SHE) by self-consistent mean-field models thereby concentrating on the widely used Skyrme-Hartree-Fock (SHF) approach. We explain briefly the theoretical tools: the SHF model, the calibration of model parameters together with statistical analysis of uncertainties and correlations, and the involved computation of fission lifetimes. We present an overview of fission stability in comparison to other decay channels over the whole landscape of SHE reaching deep into the $r$-process domain. The main emphasis lies on a detailed d…
We discuss the sensitivity of fission barrier for heavy neutron-rich nuclei to fission paths in the two dimensional neutron-proton quadrupole plane. To this end, we use the constrained Skyrme-Hartree-Fock + BCS method, and examine the difference of fission barriers obtained with three constraining operators, that is, the neutron, proton, and mass quadrupole operators. We investigate $^{220}$U, $^{236}$U, and $^{266}$U, %from proton-rich to neutron-rich uranium isotopes, that is relevant to r-process nucleosynthesis. We find that the fission barrier heights are almost the same among the three c…
Pairing properties of even-even superheavy N=184 isotones are studied within the Skyrme-Hartree-Fock+BCS approach. In the particle-hole channel we take the Skyrme energy density functional SLy4, while in the particle-particle channel we employ the seniority pairing force and zero-range delta-interactions with different forms of density dependence. We conclude that the calculated static fission trajectories weakly depend on the specific form of the delta-pairing interaction. We also investigate the impact of triaxiality on the inner fission barrier and find a rather strong Z dependence of the e…
We address very briefly five critical points in the context of the Skyrme-Hartree-Fock (SHF) scheme: 1) the impossibility to consider it as an interaction, 2) a possible inconsistency of correlation corrections as, e.g., the center-of-mass correction, 3) problems to describe the giant dipole resonance (GDR) simultaneously in light and heavy nuclei, 4) deficiencies in the extrapolation of binding energies to super-heavy elements (SHE), and 5) a yet inappropriate trend in fission life-times when going to the heaviest SHE. While the first two points have more a formal bias, the other three points…
The influence of exact angular-momentum projection and configuration mixing on properties of a heavy, well-deformed nucleus is discussed for the example of Pu240. Starting from a self-consistent model using Skyrme interactions, we analyze the resulting modifications of the deformation energy, the fission barrier height, the excitation energy of the superdeformed minimum associated with the fission isomer, the structure of the lowest rotational bands with normal deformation and superdeformation, and the corresponding quadrupole moments and transition moments. We present results obtained with th…
We present a systematics of fission barriers and fission lifetimes for the whole landscape of super-heavy elements (SHE), i.e. nuclei with Z>100. The fission lifetimes are also compared with the alpha-decay half-lives. The survey is based on a self-consistent description in terms of the Skyrme-Hartree-Fock (SHF) approach. Results for various different SHF parameterizations are compared to explore the robustness of the predictions. The fission path is computed by quadrupole constrained SHF. The computation of fission lifetimes takes care of the crucial ingredients of the large-amplitude collect…
A static microscopic study of potential-energy surfaces within the Skyrme-Hartree-Fock-plus-BCS model is carried out for the 256Fm and 258Fm isotopes with the goal of deducing some properties of spontaneous fission. The calculated fission modes are found to be in agreement with the experimentaly observed asymmetric-to-symmetric transition in the fragment-mass distributions and with the high- and low-total-kinetic-energy modes experimentally observed in 258Fm. Most of the results are similar to those obtained in macroscopic-microscopic models as well as in recent Hartree-Fock-Bogolyubov calcula…
Based on a systematic Hartree-Fock+BCS calculation, new perturbation scheme is proposed to modify the existing Skyrme-type effective nuclear force. Much attention is paid to have a better description of fission property of heavy nuclei. In terms of incorporating the nuclear medium effects on the fission barrier height more correctly, two typical Skyrme parameter sets (SkM* and SLy4) are modified. In conclusion, according to the comparison to experiments, the calculated fission barrier heights are improved by almost 90$\%$.
According to the driving potential of a fissile system, we propose a phenomenological fission potential for a description of the pre-neutron emission mass distributions of neutron-induced actinide fission. Based on the nucleus-nucleus potential with the Skyrme energy-density functional, the driving potential of the fissile system is studied considering the deformations of nuclei. The energy dependence of the potential parameters is investigated based on the experimental data for the heights of the peak and valley of the mass distributions. The pre-neutron emission mass distributions for reacti…
The restoration of the parity symmetry has been performed in the framework of the Highly Truncated Diagonalization Approach suited to treat correlations in an explicitly particle-number conserving microscopic approach. To do so we have assumed axial symmetry and used a generalized Wick's theorem due to Löwdin in a projection-after-variation scheme. We have chosen the Skyrme SkM$^*$ energy-density functional for the particle-hole channel and a density-independent delta force for the residual interaction. We have applied this approach in the region of the outer fission barrier of the $^{240}$Pu …
A systematic study of fission-barrier dependence on excitation energy has been performed using the self-consistent finite-temperature Hartree-Fock+BCS (FT-HF+BCS) formalism with the SkM* Skyrme energy density functional. The calculations have been carried out for even-even superheavy nuclei with Z ranging between 110 and 124. For an accurate description of fission pathways, the effects of triaxial and reflection-asymmetric degrees of freedom have been fully incorporated. Our survey demonstrates that the dependence of isentropic fission barriers on excitation energy changes rapidly with particl…
Background: Nuclear fission is a complex large-amplitude collective decay mode in heavy nuclei. Microscopic density functional studies of fission have previously concentrated on adiabatic approaches based on constrained static calculations ignoring dynamical excitations of the fissioning nucleus, and the daughter products. Purpose: To explore the ability of dynamic mean-field methods to describe fast fission processes beyond the fission barrier, using the nuclide $^{240}$Pu as an example. Methods: Time-dependent Hartree-Fock calculations based on the Skyrme interaction are used to calculate no…
Background: The symmetry-unrestricted Hartree-Fock-Bogoliubov (HFB) simulation is important for describing various quantum many-body systems. However, the HFB problem in Cartesian coordinate space is numerically challenging. Purpose: For describing ground states without imposing axial symmetry and looking ahead to future extension for dynamics with full time dependence, we present a numerically efficient implementation of the three-dimensional (3D) HFB code. Methods: We develop a 3D Skyrme HFB code based on the mixed-basis representation (HFBmix) which consists of two harmonic-oscillator (HO) …
The microscopic approach of fission rates and neutron emission rates in compound nuclei have been applied to $^{258}$No and $^{286}$Cn. The microscopic framework is based on the finite-temperature Skyrme-Hartree-Fock+BCS calculations, in which the fission barriers and mass parameters are self-consistently temperature dependent. The fission rates from low to high temperatures can be obtained based on the imaginary free energy method. The neutron emission rates are obtained with neutron gases at surfaces. Finally the survival probabilities of superheavy nuclei can be calculated microscopically. …
The fission processes of thermal excited nuclei are conventionally studied by statistical models which rely on inputs of phenomenological level densities and potential barriers. Therefore the microscopic descriptions of spontaneous fission and induced fission are very desirable for a unified understanding of various fission processes. We propose to study the fission rates, at both low and high temperatures, with microscopically calculated temperature-dependent fission barriers and collective mass parameters. The fission barriers are calculated by the finite-temperature Skyrme-Hartree-Fock+BCS …
Recent microscopic studies, based on the theoretical framework of nuclear energy density functionals, have analyzed dynamic (least action) and static (minimum energy) fission paths, and it has been shown that in addition to the important role played by nonaxial and/or octupole collective degrees of freedom, fission paths crucially depend on the approximations adopted in calculating the collective inertia. The dynamics of spontaneous fission of $^{264}$Fm and $^{250}$Fm is explored. The fission paths, action integrals and the corresponding half-lives predicted by the functionals PC-PK1 and DD-P…
In the light of recent experimental developments, increasing attention is devoted to nuclear phenomena related to rotational excitations of exotic intrinsic nuclear configurations that often lack symmetries present in the majority of nuclei. Examples include configurations with a non-vanishing octupole moment. In order to describe this kind of states, we have developed a new computer code to solve the self-consistent mean-field equations, able to use most of today's effective Skyrme interactions and working in coordinate-space. We report on the development of MOCCa, a code based on the same pr…
We describe the new version 3.00 of the code HFBTHO that solves the nuclear Hartree-Fock (HF) or Hartree-Fock-Bogolyubov (HFB) problem by using the cylindrical transformed deformed harmonic oscillator basis. In the new version, we have implemented the following features: (i) the full Gogny force in both particle-hole and particle-particle channels, (ii) the calculation of the nuclear collective inertia at the perturbative cranking approximation, (iii) the calculation of fission fragment charge, mass and deformations based on the determination of the neck (iv) the regularization of zero-range p…
Collective inertia is strongly influenced at the level crossing at which quantum system changes diabatically its microscopic configuration. Pairing correlations tend to make the large-amplitude nuclear collective motion more adiabatic by reducing the effect of those configuration changes. Competition between pairing and level crossing is thus expected to have a profound impact on spontaneous fission lifetimes. To elucidate the role of nucleonic pairing on spontaneous fission, we study the dynamic fission trajectories of $^{264}$Fm and $^{240}$Pu using the state-of-the-art self-consistent frame…
Background: Fission barriers of actinide nuclei have been mostly and for long been microscopi- cally calculated for even-even fissioning systems. Calculations in the case of odd nuclei have been performed merely within a so-called equal-filling approximation (EFA) as opposed to an approach taking explicitly into account the time reversal breaking properties at the mean field level- and for only one single-particle configuration. Purpose: We study the dependence of the fission barriers on various relevant configurations (e.g. to evaluate the so-called specialization energy). Besides, we want to…
We investigate the structure of the potential energy surfaces of the superheavy nuclei 258Fm, 264Hs, (Z=112,N=166), (Z=114,N=184), and (Z=120,N=172) within the framework of self-consistent nuclear models, i.e. the Skyrme-Hartree-Fock approach and the relativistic mean-field model. We compare results obtained with one representative parametrisation of each model which is successful in describing superheavy nuclei. We find systematic changes as compared to the potential energy surfaces of heavy nuclei in the uranium region: there is no sufficiently stable fission isomer any more, the importance …
Nuclear density functional theory is the only microscopical theory that can be applied throughout the entire nuclear landscape. Its key ingredient is the energy density functional. In this work, we propose a new parameterization UNEDF2 of the Skyrme energy density functional. The functional optimization is carried out using the POUNDerS optimization algorithm within the framework of the Skyrme Hartree-Fock-Bogoliubov theory. Compared to the previous parameterization UNEDF1, restrictions on the tensor term of the energy density have been lifted, yielding a very general form of the energy densit…
We describe the new version (v2.73y) of the code HFODD which solves the nuclear Skyrme Hartree-Fock or Skyrme Hartree-Fock-Bogolyubov problem by using the Cartesian deformed harmonic-oscillator basis. In the new version, we have implemented the following new features: (i) full proton-neutron mixing in the particle-hole channel for Skyrme functionals, (ii) the Gogny force in both particle-hole and particle-particle channels, (iii) linear multi-constraint method at finite temperature, (iv) fission toolkit including the constraint on the number of particles in the neck between two fragments, calc…
Using the ETFSI (extended Thomas-Fermi plus Strutinsky integral) method, we have calculated the fission barriers of nearly 2000 exotic nuclei, including all the neutron-rich nuclei up to A=318 that are expected to be relevant to the r-process, and all the superheavy nuclei in the vicinity of N=184, with Z<=120. Our calculations were performed with the Skyrme force SkSC4, which was determined in the ETFSI-1 mass fit. For proton-deficient nuclei in the region of N=184 we find the barriers to be much higher than previously believed, which suggests that the r-process path might continue to mass nu…
In this latest of our series of Skyrme-HFB mass models, HFB-16, we introduce the new feature of requiring that the contact pairing force reproduce at each density the $^1S_0$ pairing gap of neutron matter as determined in microscopic calculations with realistic nucleon-nucleon forces. We retain the earlier constraints on the Skyrme force of reproducing the energy-density curve of neutron matter, and of having an isoscalar effective mass of $0.8M$ in symmetric infinite nuclear matter at the saturation density; we also keep the recently adopted device of dropping Coulomb exchange. Furthermore, t…
The purpose of this study is threefold: first, to identify a scheme for the determination of the surface energy coefficient a_surf that offers the best compromise between robustness, precision, and numerical efficiency; second, to analyze the correlation between values for a_surf and the characteristic energies of the fission barrier of Pu240; and third, to lay out a procedure how the deformation properties of the Skyrme energy density functional (EDF) can be constrained during the parameter fit. There are several frequently used possibilities to define and calculate the surface energy coeffic…
Shell effects in quasifission toward $^{180} \mathrm{Hg}$: insights into fission asymmetric modes
Sino-French Institute of Nuclear Engineering and Technology, Sun Yat-sen University（中山大学中法核工程与技术学院）；Department of Physics, Graduate School of Science, The University of Tokyo（东京大学理学研究科物理学系）；Quark Nuclear Science Institute, The University of Tokyo（东京大学夸克核科学研究所）；RIKEN Center for Interdisciplinary Theoretical and Mathematical Sciences (iTHEMS)（理化学研究所交叉理论数学科学中心（iTHEMS））；Key Laboratory of Nuclear Data, China Institute of Atomic Energy（中国原子能科学研究院核数据重点实验室）
Rotational bands of $^{252, 253, 254}$No and the fission barriers of $^{254}$No at spin 0$\hbar$ and 20$\hbar$ are calculated with the Hartree-Fock-Bogolyubov theory and the Lipkin-Nogami approximate particle number projection. The SLy4 Skyrme force is used in the particle-hole channel. A zero-range force with and without density-dependence is used in the particle-particle channel. The experimental ground state deformation (${\cal{Q}}_{20}$ = 32.8 b) is reproduced as well as the increase of the dynamical moment of inertia with frequency both for $^{252}$No and $^{254}$No. The rotational band o…
Microscopic Spin-Parity Distributions of Fission Fragments
Université de Toulouse, CNRS/IN2P3, L2IT（图卢兹大学）；University of Zagreb, Faculty of Science, Department of Physics（萨格勒布大学理学院）；Lawrence Livermore National Laboratory（劳伦斯利弗莫尔国家实验室）
Background: Microscopic description of spontaneous fission is one of the most challenging subjects in nuclear physics. It is necessary to evaluate the collective potential and the collective inertia along a fission path for a description of quantum tunneling in spontaneous or low-energy fission. In past studies of the fission dynamics based on nuclear energy density functional (EDF) theory, the collective inertia has been evaluated with the cranking approximation, which neglects dynamical residual effects. Purpose: The purpose is to provide a reliable and efficient method to include dynamical …
We present the TDDFT+Langevin model that incorporates microscopic time-dependent density function theory (TDDFT) with macroscopic Langevin model. By extracting the energy-dependent dissipation effect from the TDDFT dynamics, quantum effects are introduced to the Langevin-type stochastic fission analysis. In this paper, by means of Skyrme nuclear effective interactions, the energy-dependent friction coefficients to be used in Langevin calculations are provided individually for 25 fission nuclei chosen from uranium, plutonium, curium, californium, and fermium isotopes. The validity of the energy…
\noindent\textbf{Background:} While many phenomenological models for nuclear fission have been developed, a microscopic understanding of fission has remained one of the most challenging problems in nuclear physics. \noindent\textbf{Purpose:} We investigate an applicability of the generator coordinate method (GCM) as a microscopic theory for cluster radioactivities of heavy nuclei, which can be regarded as a fission with large mass asymmetry, that is, a phenomenon in between fission and $α$-decays. \noindent\textbf{Methods:} Based on the Gamow theory, we evaluate the preformation probability of…
$\textbf{Background}$ More than half of all the elements heavier than iron are made by the rapid neutron capture process (or r process). For very neutron-rich astrophysical conditions, such at those found in the tidal ejecta of neutron stars, nuclear fission determines the r-process endpoint, and the fission fragment yields shape the final abundances of $110\le A \le 170$ nuclei. The knowledge of fission fragment yields of hundreds of nuclei inhabiting very neutron-rich regions of the nuclear landscape is thus crucial for the modeling of heavy-element nucleosynthesis. $\textbf{Purpose}$ In thi…
Skyrme-Hartree-Fock-Bogoliubov mass models on a 3D mesh: V. The N2LO extension of the Skyrme EDF
Université Libre de Bruxelles（布鲁塞尔自由大学）；Institut d’Astronomie et d’Astrophysique, Université Libre de Bruxelles（布鲁塞尔自由大学天体物理与天文学研究所）；Brussels Laboratory of the Universe – BLU-ULB（布鲁塞尔宇宙实验室）；Universität Potsdam（波茨坦大学）；Institut für Physik und Astronomie, Universität Potsdam（波茨坦大学物理与天文学研究所）
In the framework of nuclear energy density functional (EDF) methods, many nuclear phenomena are related to the deformation of intrinsic states. Their accurate modeling relies on the correct description of the change of nuclear binding energy with deformation. The two most important contributions to the deformation energy have their origin in shell effects that are correlated to the spectrum of single-particle states, and the deformability of nuclear matter, that can be characterized by a model-dependent surface energy coefficient a_{surf}. With the goal of improving the global performance of n…
We study the bulk deformation properties of the Skyrme nuclear energy density functionals. Following simple arguments based on the leptodermous expansion and liquid drop model, we apply the nuclear density functional theory to assess the role of the surface symmetry energy in nuclei. To this end, we validate the commonly used functional parametrizations against the data on excitation energies of superdeformed band-heads in Hg and Pb isotopes, and fission isomers in actinide nuclei. After subtracting shell effects, the results of our self-consistent calculations are consistent with macroscopic …
A new Skyrme-like energy density suitable for studies of strongly elongated nuclei has been determined in the framework of the Hartree-Fock-Bogoliubov theory using the recently developed model-based, derivative-free optimization algorithm POUNDerS. A sensitivity analysis at the optimal solution has revealed the importance of states at large deformations in driving the parameterization of the functional. The good agreement with experimental data on masses and separation energies, achieved with the previous parameterization UNEDF0, is largely preserved. In addition, the new energy density UNEDF1…
