COVID-19 Detection in Computed Tomography Images with 2D and 3D Approaches
Sabanci University（萨班哲大学）；University of Surrey（萨里大学）；Urbanstat；Istanbul University-Cerrahpaşa（伊斯坦布尔大学-切拉赫帕夏）
Sara Atito Ali Ahmed, Mehmet Can Yavuz, Mehmet Umut Sen, Fatih Gulsen, Onur Tutar, Bora Korkmazer, Cesur Samanci, Sabri Sirolu, Rauf Hamid, Ali Ergun Eryurekli,… 展开作者
Sara Atito Ali Ahmed, Mehmet Can Yavuz, Mehmet Umut Sen, Fatih Gulsen, Onur Tutar, Bora Korkmazer, Cesur Samanci, Sabri Sirolu, Rauf Hamid, Ali Ergun Eryurekli, Toghrul Mammadov, Berrin Yanikoglu
Detecting COVID-19 in computed tomography (CT) or radiography images has been proposed as a supplement to the definitive RT-PCR test. We present a deep learning ensemble for detecting COVID-19 infection, combining slice-based (2D) and volume-based (3D) approaches. The 2D system detects the infection on each CT slice independently, combining them to obtain the patient-level decision via different methods (averaging and long-short term memory networks). The 3D system takes the whole CT volume to arrive to the patient-level decision in one step. A new high resolution chest CT scan dataset, called the IST-C dataset, is also collected in this work. The proposed ensemble, called IST-CovNet, obtains 90.80% accuracy and 0.95 AUC score overall on the IST-C dataset in detecting COVID-19 among normal controls and other types of lung pathologies; and 93.69% accuracy and 0.99 AUC score on the publicly available MosMed dataset that consists of COVID-19 scans and normal controls only. The system is deployed at Istanbul University Cerrahpasa School of Medicine.
Concordia University（康考迪亚大学）；McGill University Health Center-Research Institute（麦吉尔大学健康中心研究所）；Sunnybrook Health Sciences Centre（桑尼布鲁克健康科学中心）；University of Toronto（多伦多大学）；University of Montreal（蒙特利尔大学）；Iran University of Medical Science（伊朗医科大学）
Novel Coronavirus (COVID-19) has drastically overwhelmed more than 200 countries affecting millions and claiming almost 1 million lives, since its emergence in late 2019. This highly contagious disease can easily spread, and if not controlled in a timely fashion, can rapidly incapacitate healthcare systems. The current standard diagnosis method, the Reverse Transcription Polymerase Chain Reaction (RT- PCR), is time consuming, and subject to low sensitivity. Chest Radiograph (CXR), the first imaging modality to be used, is readily available and gives immediate results. However, it has notorious…
National Institute of Technology, Hamirpur（国家理工学院哈米尔布尔分校）；Emory University School of Medicine（埃默里大学医学院）
The COVID-19 (coronavirus disease 2019) pandemic affected more than 186 million people with over 4 million deaths worldwide by June 2021. The magnitude of which has strained global healthcare systems. Chest Computed Tomography (CT) scans have a potential role in the diagnosis and prognostication of COVID-19. Designing a diagnostic system which is cost-efficient and convenient to operate on resource-constrained devices like mobile phones would enhance the clinical usage of chest CT scans and provide swift, mobile, and accessible diagnostic capabilities. This work proposes developing a novel And…
Duke University School of Medicine（杜克大学医学院）；Duke University（杜克大学）；National Artificial Intelligence Institute, U.S. Dept. of Veterans Affairs（美国退伍军人事务部国家人工智能研究所）
Research studies of artificial intelligence models in medical imaging have been hampered by poor generalization. This problem has been especially concerning over the last year with numerous applications of deep learning for COVID-19 diagnosis. Virtual imaging trials (VITs) could provide a solution for objective evaluation of these models. In this work utilizing the VITs, we created the CVIT-COVID dataset including 180 virtually imaged computed tomography (CT) images from simulated COVID-19 and normal phantom models under different COVID-19 morphology and imaging properties. We evaluated the pe…
Radboud university medical center（拉德堡德大学医学中心）；Radboud Institute for Health Sciences（拉德堡德健康科学研究所）
Amidst the ongoing pandemic, several studies have shown that COVID-19 classification and grading using computed tomography (CT) images can be automated with convolutional neural networks (CNNs). Many of these studies focused on reporting initial results of algorithms that were assembled from commonly used components. The choice of these components was often pragmatic rather than systematic. For instance, several studies used 2D CNNs even though these might not be optimal for handling 3D CT volumes. This paper identifies a variety of components that increase the performance of CNN-based algorit…
HRCTCov19 -- A High-Resolution Chest CT Scan Image Dataset for COVID-19 Diagnosis and Differentiation
Isfahan University of Medical Sciences（伊斯法罕医科大学）；Isfahan University of Technology（伊斯法罕理工大学）；Arak University of Medical Sciences（阿拉克医科大学）；Islamic Azad University（伊斯兰阿扎德大学）
Università degli Studi di Milano（米兰大学）；ASST Grande Ospedale Metropolitano Niguarda（ASST 大都会大医院尼瓜达）；INFN Sezione di Milano（意大利国家核物理研究院米兰分部）
Purpose: to optimize a pipeline of clinical data gathering and CT images processing implemented during the COVID-19 pandemic crisis and to develop artificial intelligence model for different of viral pneumonia. Methods: 1028 chest CT image of patients with positive swab were segmented automatically for lung extraction. A Gaussian model developed in Python language was applied to calculate quantitative metrics (QM) describing well-aerated and ill portions of the lungs from the histogram distribution of lung CT numbers in both lungs of each image and in four geometrical subdivision. Furthermore,…
Biomedical Imaging Research Institute, Cedars-Sinai Medical Center（西达赛奈医学中心生物医学成像研究所）；Cedars-Sinai Medical Center（西达赛奈医学中心）；Semmelweis University（塞梅尔维斯大学）；Azienda Ospedaliero-Universitaria di Parma（帕尔马大学医院）；Monash Health（莫纳什医疗中心）；Centro Cardiologico Monzino IRCCS, University of Milan（米兰大学蒙齐诺心脏中心IRCCS）；Showa University School of Medicine（昭和大学医学院）
Quantitative lung measures derived from computed tomography (CT) have been demonstrated to improve prognostication in coronavirus disease (COVID-19) patients, but are not part of the clinical routine since required manual segmentation of lung lesions is prohibitively time-consuming. We propose a new fully automated deep learning framework for rapid quantification and differentiation between lung lesions in COVID-19 pneumonia from both contrast and non-contrast CT images using convolutional Long Short-Term Memory (ConvLSTM) networks. Utilizing the expert annotations, model training was performe…
Fast and automatic algorithm to segment Brain (intracranial region) from computed tomography (CT) head images using combination of HU thresholding, identification of intracranial voxels through ray intersection with cranium, special binary erosion and connected components per slice.
Saratoga High School（萨拉托加高中）；Stanford University（斯坦福大学）
Chest X-rays of coronavirus disease 2019 (COVID-19) patients are frequently obtained to determine the extent of lung disease and are a valuable source of data for creating artificial intelligence models. Most work to date assessing disease severity on chest imaging has focused on segmenting computed tomography (CT) images; however, given that CTs are performed much less frequently than chest X-rays for COVID-19 patients, automated lung lesion segmentation on chest X-rays could be clinically valuable. There currently exists a universal shortage of chest X-rays with ground truth COVID-19 lung le…
This work presents TorchRadon -- an open source CUDA library which contains a set of differentiable routines for solving computed tomography (CT) reconstruction problems. The library is designed to help researchers working on CT problems to combine deep learning and model-based approaches. The package is developed as a PyTorch extension and can be seamlessly integrated into existing deep learning training code. Compared to the existing Astra Toolbox, TorchRadon is up to 125 faster. The operators implemented by TorchRadon allow the computation of gradients using PyTorch backward(), and can ther…
Melbourne Data Analytics Platform（墨尔本数据分析平台）；University of Melbourne（墨尔本大学）
Deep learning has been used to assist in the analysis of medical imaging. One such use is the classification of Computed Tomography (CT) scans when detecting for COVID-19 in subjects. This paper presents Cov3d, a three dimensional convolutional neural network for detecting the presence and severity of COVID19 from chest CT scans. Trained on the COV19-CT-DB dataset with human expert annotations, it achieves a macro f1 score of 0.9476 on the validation set for the task of detecting the presence of COVID19. For the task of classifying the severity of COVID19, it achieves a macro f1 score of 0.755…
Computed Tomography (CT) is an imaging technique where information about an object are collected at different angles (called projections or scans). Then the cross-sectional image showing the internal structure of the slice is produced by solving an inverse problem. Limited by certain factors such as radiation dosage, projection angles, the produced images can be noisy or contain artifacts. Inspired by the success of transformer for natural language processing, the core idea of this preliminary study is to consider a projection of tomography as a word token, and the whole scan of the cross-sect…
This technical report proposes the use of a deep convolutional neural network as a preliminary diagnostic method in the analysis of chest computed tomography images from patients with symptoms of Severe Acute Respiratory Syndrome (SARS) and suspected COVID-19 disease, especially on occasions when the delay of the RT-PCR result and the absence of urgent care could result in serious temporary, long-term, or permanent health damage. The model was trained on 83,391 images, validated on 15,297, and tested on 22,185 figures, achieving an F1-Score of 98%, 97.59% in Cohen's Kappa, 98.4% in Accuracy, a…
University of Stavanger（斯塔万格大学）；Stavanger University Hospital（斯塔万格大学医院）
More than 13 million people suffer from ischemic cerebral stroke worldwide each year. Thrombolytic treatment can reduce brain damage but has a narrow treatment window. Computed Tomography Perfusion imaging is a commonly used primary assessment tool for stroke patients, and typically the radiologists will evaluate resulting parametric maps to estimate the affected areas, dead tissue (core), and the surrounding tissue at risk (penumbra), to decide further treatments. Different work has been reported, suggesting thresholds, and semi-automated methods, and in later years deep neural networks, for …
St. Michael’s Hospital（圣迈克尔医院）；Unity Health Toronto（多伦多统一健康中心）；University of Toronto（多伦多大学）；Stanford University（斯坦福大学）
Fractures of the cervical spine are a medical emergency and may lead to permanent paralysis and even death. Accurate diagnosis in patients with suspected fractures by computed tomography (CT) is critical to patient management. In this paper, we propose a deep convolutional neural network (DCNN) with a bidirectional long-short term memory (BLSTM) layer for the automated detection of cervical spine fractures in CT axial images. We used an annotated dataset of 3,666 CT scans (729 positive and 2,937 negative cases) to train and validate the model. The validation results show a classification accur…
University College London（伦敦大学学院）；University of Bremen（不来梅大学）；University of Cambridge（剑桥大学）
We investigate adaptive design based on a single sparse pilot scan for generating effective scanning strategies for computed tomography reconstruction. We propose a novel approach using the linearised deep image prior. It allows incorporating information from the pilot measurements into the angle selection criteria, while maintaining the tractability of a conjugate Gaussian-linear model. On a synthetically generated dataset with preferential directions, linearised DIP design allows reducing the number of scans by up to 30% relative to an equidistant angle baseline.
Graz University of Technology（格拉茨技术大学）；Johannes Kepler University Linz（约翰内斯·开普勒林茨大学）
In the past decades, Computed Tomography (CT) has established itself as one of the most important imaging techniques in medicine. Today, the applicability of CT is only limited by the deposited radiation dose, reduction of which manifests in noisy or incomplete measurements. Thus, the need for robust reconstruction algorithms arises. In this work, we learn a parametric regularizer with a global receptive field by maximizing it's likelihood on reference CT data. Due to this unsupervised learning strategy, our trained regularizer truly represents higher-level domain statistics, which we empirica…
Classic algebraic reconstruction technology (ART) for computed tomography requires pre-determined weights of the voxels for projecting pixel values. However, such weight cannot be accurately obtained due to the limitation of the physical understanding and computation resources. In this study, we propose a semi-case-wise learning-based method named Weight Encode Reconstruction Network (WERNet) to tackle the issues mentioned above. The model is trained in a self-supervised manner without the label of a voxel set. It contains two branches, including the voxel weight encoder and the voxel attentio…
National Yang Ming Chiao Tung University（国立阳明交通大学）；National Cheng Kung University Hospital（国立成功大学医院）；National Cheng Kung University（国立成功大学）
The clinical symptoms of pulmonary embolism (PE) are very diverse and non-specific, which makes it difficult to diagnose. In addition, pulmonary embolism has multiple triggers and is one of the major causes of vascular death. Therefore, if it can be detected and treated quickly, it can significantly reduce the risk of death in hospitalized patients. In the detection process, the cost of computed tomography pulmonary angiography (CTPA) is high, and angiography requires the injection of contrast agents, which increase the risk of damage to the patient. Therefore, this study will use a deep learn…
Indian Institute of Technology Kharagpur（印度理工学院卡拉格普尔分校）；Intel Technology India Pvt. Ltd.（英特尔技术印度私人有限公司）
Lung cancer is the most common form of cancer found worldwide with a high mortality rate. Early detection of pulmonary nodules by screening with a low-dose computed tomography (CT) scan is crucial for its effective clinical management. Nodules which are symptomatic of malignancy occupy about 0.0125 - 0.025\% of volume in a CT scan of a patient. Manual screening of all slices is a tedious task and presents a high risk of human errors. To tackle this problem we propose a computationally efficient two stage framework. In the first stage, a convolutional neural network (CNN) trained adversarially …
In this work, we investigate the application of deep learning methods for computed tomography in the context of having a low-data regime. As motivation, we review some of the existing approaches and obtain quantitative results after training them with different amounts of data. We find that the learned primal-dual has an outstanding performance in terms of reconstruction quality and data efficiency. However, in general, end-to-end learned methods have two issues: a) lack of classical guarantees in inverse problems and b) lack of generalization when not trained with enough data. To overcome the…
National Institute for Mathematical Sciences（国家数学科学研究所）；Yonsei University（延世大学）
This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations o…
In this paper, the Primal-Dual UNet for sparse view CT reconstruction is modified to be applicable to cone beam projections and perform reconstructions of entire volumes instead of slices. Experiments show that the PSNR of the proposed method is increased by 10dB compared to the direct FDK reconstruction and almost 3dB compared to the modified original Primal-Dual Network when using only 23 projections. The presented network is not optimized wrt. memory consumption or hyperparameters but merely serves as a proof of concept and is limited to low resolution projections and volumes.
University of Cambridge（剑桥大学）；University of Cincinnati（辛辛那提大学）
Quantitative cancer image analysis relies on the accurate delineation of tumours, a very specialised and time-consuming task. For this reason, methods for automated segmentation of tumours in medical imaging have been extensively developed in recent years, being Computed Tomography one of the most popular imaging modalities explored. However, the large amount of 3D voxels in a typical scan is prohibitive for the entire volume to be analysed at once in conventional hardware. To overcome this issue, the processes of downsampling and/or resampling are generally implemented when using traditional …
Technion - Israel Institute of Technology（以色列理工学院）
We propose a supervised machine learning approach for boosting existing signal and image recovery methods and demonstrate its efficacy on example of image reconstruction in computed tomography. Our technique is based on a local nonlinear fusion of several image estimates, all obtained by applying a chosen reconstruction algorithm with different values of its control parameters. Usually such output images have different bias/variance trade-off. The fusion of the images is performed by feed-forward neural network trained on a set of known examples. Numerical experiments show an improvement in re…
During the outbreak time of COVID-19, computed tomography (CT) is a useful manner for diagnosing COVID-19 patients. Due to privacy issues, publicly available COVID-19 CT datasets are highly difficult to obtain, which hinders the research and development of AI-powered diagnosis methods of COVID-19 based on CTs. To address this issue, we build an open-sourced dataset -- COVID-CT, which contains 349 COVID-19 CT images from 216 patients and 463 non-COVID-19 CTs. The utility of this dataset is confirmed by a senior radiologist who has been diagnosing and treating COVID-19 patients since the outbrea…
Technical University of Denmark（丹麦技术大学）；University of Antwerp（安特卫普大学）
In computed tomography, the reconstruction is typically obtained on a voxel grid. In this work, however, we propose a mesh-based reconstruction method. For tomographic problems, 3D meshes have mostly been studied to simulate data acquisition, but not for reconstruction, for which a 3D mesh means the inverse process of estimating shapes from projections. In this paper, we propose a differentiable forward model for 3D meshes that bridge the gap between the forward model for 3D surfaces and optimization. We view the forward projection as a rendering process, and make it differentiable by extendin…
An algorithm is presented for constructing high-order signed distance fields for two phase materials imaged with computed tomography. The signed distance field is high-order in that it is free of the quantization artifact associated with the distance transform of sampled signals. The narrowband is solved using a closest point algorithm extended for implicit embeddings that are not a signed distance field. The high-order fast sweeping algorithm is used to extend the narrowband to the remainder of the domain. The order of accuracy of the narrowband and extension methods are verified on ideal imp…
Image models are central to all image processing tasks. The great advancements in digital image processing would not have been made possible without powerful models which, themselves, have evolved over time. In the past decade, patch-based models have emerged as one of the most effective models for natural images. Patch-based methods have outperformed other competing methods in many image processing tasks. These developments have come at a time when greater availability of powerful computational resources and growing concerns over the health risks of the ionizing radiation encourage research o…
Airway segmentation in computed tomography images can be used to analyze pulmonary diseases, however, manual segmentation is labor intensive and relies on expert knowledge. This manuscript details our contribution to MICCAI's 2022 Airway Tree Modelling challenge, a competition of fully automated methods for airway segmentation. We employed a previously developed deep learning architecture based on a modified EfficientDet (MEDSeg), training from scratch for binary airway segmentation using the provided annotations. Our method achieved 90.72 Dice in internal validation, 95.52 Dice on external va…
With more than 60,000 deaths annually in the United States, Pulmonary Embolism (PE) is among the most fatal cardiovascular diseases. It is caused by an artery blockage in the lung; confirming its presence is time-consuming and is prone to over-diagnosis. The utilization of automated PE detection systems is critical for diagnostic accuracy and efficiency. In this study we propose a two-stage attention-based CNN-LSTM network for predicting PE, its associated type (chronic, acute) and corresponding location (leftsided, rightsided or central) on computed tomography (CT) examinations. We trained ou…
University of Oulu（奥卢大学）；University College London（伦敦大学学院）
Multi-energy computed tomography (CT) with photon counting detectors (PCDs) enables spectral imaging as PCDs can assign the incoming photons to specific energy channels. However, PCDs with many spectral channels drastically increase the computational complexity of the CT reconstruction, and bespoke reconstruction algorithms need fine-tuning to varying noise statistics. \rev{Especially if many projections are taken, a large amount of data has to be collected and stored. Sparse view CT is one solution for data reduction. However, these issues are especially exacerbated when sparse imaging scenar…
Underestimation of lung regions on chest X-ray segmentation masks assessed by comparison with total lung volume evaluated on computed tomography
Medical University of Warsaw（华沙医科大学）；Warsaw University of Technology（华沙理工大学）；MI2.ai；University of Amsterdam（阿姆斯特丹大学）；Amsterdam University Medical Center（阿姆斯特丹大学医学中心）；Medical University of Silesia（西里西亚医科大学）；University of Warsaw（华沙大学）
The University of Iceland（冰岛大学）；ETH Zurich（苏黎世联邦理工学院）；The University of Calgary（卡尔加里大学）；McCaig Institute for Bone and Joint Health（麦凯格骨关节健康研究所）；The Icelandic Heart Association（冰岛心脏协会）；The Johns Hopkins University（约翰斯·霍普金斯大学）
Osteoporosis is a common bone disease that increases the risk of bone fracture. Hip-fracture risk screening methods based on finite element analysis depend on segmented computed tomography (CT) images; however, current femur segmentation methods require manual delineations of large data sets. Here we propose a deep neural network for fully automated, accurate, and fast segmentation of the proximal femur from CT. Evaluation on a set of 1147 proximal femurs with ground truth segmentations demonstrates that our method is apt for hip-fracture risk screening, bringing us one step closer to a clinic…
Rensselaer Polytechnic Institute（伦斯勒理工学院）；Massachusetts General Hospital（麻省总医院）；Harvard Medical School（哈佛医学院）；Niskayuna High School（尼斯卡尤纳高中）
Cancer patients have a higher risk of cardiovascular disease (CVD) mortality than the general population. Low dose computed tomography (LDCT) for lung cancer screening offers an opportunity for simultaneous CVD risk estimation in at-risk patients. Our deep learning CVD risk prediction model, trained with 30,286 LDCTs from the National Lung Cancer Screening Trial, achieved an area under the curve (AUC) of 0.871 on a separate test set of 2,085 subjects and identified patients with high CVD mortality risks (AUC of 0.768). We validated our model against ECG-gated cardiac CT based markers, includin…
With the availability of more powerful computers, iterative reconstruction algorithms are the subject of an ongoing work in the design of more efficient reconstruction algorithms for X-ray computed tomography. In this work, we show how two analytical reconstruction algorithms can be improved by correcting the corresponding reconstructions using a randomized iterative reconstruction algorithm. The combined analytical reconstruction followed by randomized iterative reconstruction can also be viewed as a reconstruction algorithm which, in the experiments we have conducted, uses up to $35\%$ less …
Lesions are injuries and abnormal tissues in the human body. Detecting lesions in 3D Computed Tomography (CT) scans can be time-consuming even for very experienced physicians and radiologists. In recent years, CNN based lesion detectors have demonstrated huge potentials. Most of current state-of-the-art lesion detectors employ anchors to enumerate all possible bounding boxes with respect to the dataset in process. This anchor mechanism greatly improves the detection performance while also constraining the generalization ability of detectors. In this paper, we propose an anchor-free lesion dete…
Early detection of pulmonary cancer is the most promising way to enhance a patient's chance for survival. Accurate pulmonary nodule detection in computed tomography (CT) images is a crucial step in diagnosing pulmonary cancer. In this paper, inspired by the successful use of deep convolutional neural networks (DCNNs) in natural image recognition, we propose a novel pulmonary nodule detection approach based on DCNNs. We first introduce a deconvolutional structure to Faster Region-based Convolutional Neural Network (Faster R-CNN) for candidate detection on axial slices. Then, a three-dimensional…
In computed tomography (CT), data truncation is a common problem. Images reconstructed by the standard filtered back-projection algorithm from truncated data suffer from cupping artifacts inside the field-of-view (FOV), while anatomical structures are severely distorted or missing outside the FOV. Deep learning, particularly the U-Net, has been applied to extend the FOV as a post-processing method. Since image-to-image prediction neglects the data fidelity to measured projection data, incorrect structures, even inside the FOV, might be reconstructed by such an approach. Therefore, generating r…
University of Edinburgh（爱丁堡大学）；ETH Zurich（苏黎世联邦理工学院）
Spectral Photon-Counting Computed Tomography (SPCCT) is a promising technology that has shown a number of advantages over conventional X-ray Computed Tomography (CT) in the form of material separation, artefact removal and enhanced image quality. However, due to the increased complexity and non-linearity of the SPCCT governing equations, model-based reconstruction algorithms typically require handcrafted regularisation terms and meticulous tuning of hyperparameters making them impractical to calibrate in variable conditions. Additionally, they typically incur high computational costs and in ca…
Technion - Israel Institute of Technology（以色列理工学院）
We propose a direct reconstruction algorithm for Computed Tomography, based on a local fusion of a few preliminary image estimates by means of a non-linear fusion rule. One such rule is based on a signal denoising technique which is spatially adaptive to the unknown local smoothness. Another, more powerful fusion rule, is based on a neural network trained off-line with a high-quality training set of images. Two types of linear reconstruction algorithms for the preliminary images are employed for two different reconstruction tasks. For an entire image reconstruction from full projection data, t…
University of Science and Technology of China（中国科学技术大学）
In application of tomography imaging, limited-angle problem is a quite practical and important issue. In this paper, an iterative reprojection-reconstruction (IRR) algorithm using a modified Papoulis-Gerchberg (PG) iterative scheme is developed for reconstruction from limited-angle projections which contain noise. The proposed algorithm has two iterative update processes, one is the extrapolation of unknown data, and the other is the modification of the known noisy observation data. And the algorithm introduces scaling factors to control the two processes, respectively. The convergence of the …
Velammal College of Engg and Tech（维拉马尔工程技术学院）；Thiagarajar College of Engg（蒂亚加拉贾工程技术学院）
The research work presented in this paper is to achieve the tissue classification and automatically diagnosis the abnormal tumor region present in Computed Tomography (CT) images using the wavelet based statistical texture analysis method. Comparative studies of texture analysis method are performed for the proposed wavelet based texture analysis method and Spatial Gray Level Dependence Method (SGLDM). Our proposed system consists of four phases i) Discrete Wavelet Decomposition (ii) Feature extraction (iii) Feature selection (iv) Analysis of extracted texture features by classifier. A wavelet…
Recent studies have shown that lung cancer screening using annual low-dose computed tomography (CT) reduces lung cancer mortality by 20% compared to traditional chest radiography. Therefore, CT lung screening has started to be used widely all across the world. However, analyzing these images is a serious burden for radiologists. In this study, we propose a novel and simple framework that analyzes CT lung screenings using convolutional neural networks (CNNs) and reduces false positives. Our framework shows that even non-complex architectures are very powerful to classify 3D nodule data when com…
