COVID-CT-Dataset: A CT Scan Dataset about COVID-19

COVID-CT-MD: COVID-19 Computed Tomography (CT) Scan Dataset Applicable in Machine Learning and Deep Learning

Novel Coronavirus (COVID-19) has drastically overwhelmed more than 200 countries affecting millions and claiming almost 1 million lives, since its emergence in late 2019. This highly contagious disease can easily spread, and if not controlled in a timely fashion, can rapidly incapacitate healthcare systems. The current standard diagnosis method, the Reverse Transcription Polymerase Chain Reaction (RT- PCR), is time consuming, and subject to low sensitivity. Chest Radiograph (CXR), the first imaging modality to be used, is readily available and gives immediate results. However, it has notorious…

Detecting COVID-19 and Community Acquired Pneumonia using Chest CT scan images with Deep Learning

We propose a two-stage Convolutional Neural Network (CNN) based classification framework for detecting COVID-19 and Community-Acquired Pneumonia (CAP) using the chest Computed Tomography (CT) scan images. In the first stage, an infection - COVID-19 or CAP, is detected using a pre-trained DenseNet architecture. Then, in the second stage, a fine-grained three-way classification is done using EfficientNet architecture. The proposed COVID+CAP-CNN framework achieved a slice-level classification accuracy of over 94% at identifying COVID-19 and CAP. Further, the proposed framework has the potential t…

COVID-FACT: A Fully-Automated Capsule Network-based Framework for Identification of COVID-19 Cases from Chest CT scans

The newly discovered Corona virus Disease 2019 (COVID-19) has been globally spreading and causing hundreds of thousands of deaths around the world as of its first emergence in late 2019. Computed tomography (CT) scans have shown distinctive features and higher sensitivity compared to other diagnostic tests, in particular the current gold standard, i.e., the Reverse Transcription Polymerase Chain Reaction (RT-PCR) test. Current deep learning-based algorithms are mainly developed based on Convolutional Neural Networks (CNNs) to identify COVID-19 pneumonia cases. CNNs, however, require extensive …

Automated Detection of COVID-19 from CT Scans Using Convolutional Neural Networks

COVID-19 is an infectious disease that causes respiratory problems similar to those caused by SARS-CoV (2003). Currently, swab samples are being used for its diagnosis. The most common testing method used is the RT-PCR method, which has high specificity but variable sensitivity. AI-based detection has the capability to overcome this drawback. In this paper, we propose a prospective method wherein we use chest CT scans to diagnose the patients for COVID-19 pneumonia. We use a set of open-source images, available as individual CT slices, and full CT scans from a private Indian Hospital to train …

COVID-Rate: An Automated Framework for Segmentation of COVID-19 Lesions from Chest CT Scans

Novel Coronavirus disease (COVID-19) is a highly contagious respiratory infection that has had devastating effects on the world. Recently, new COVID-19 variants are emerging making the situation more challenging and threatening. Evaluation and quantification of COVID-19 lung abnormalities based on chest Computed Tomography (CT) scans can help determining the disease stage, efficiently allocating limited healthcare resources, and making informed treatment decisions. During pandemic era, however, visual assessment and quantification of COVID-19 lung lesions by expert radiologists become expensiv…

Few-shot Learning for CT Scan based COVID-19 Diagnosis

Coronavirus disease 2019 (COVID-19) is a Public Health Emergency of International Concern infecting more than 40 million people across 188 countries and territories. Chest computed tomography (CT) imaging technique benefits from its high diagnostic accuracy and robustness, it has become an indispensable way for COVID-19 mass testing. Recently, deep learning approaches have become an effective tool for automatic screening of medical images, and it is also being considered for COVID-19 diagnosis. However, the high infection risk involved with COVID-19 leads to relative sparseness of collected la…

Custom Deep Neural Network for 3D Covid Chest CT-scan Classification

3D CT-scan base on chest is one of the controversial topisc of the researcher nowadays. There are many tasks to diagnose the disease through CT-scan images, include Covid19. In this paper, we propose a method that custom and combine Deep Neural Network to classify the series of 3D CT-scans chest images. In our methods, we experiment with 2 backbones is DenseNet 121 and ResNet 101. In this proposal, we separate the experiment into 2 tasks, one is for 2 backbones combination of ResNet and DenseNet, one is for DenseNet backbones combination.

Diagnosis of COVID-19 disease using CT scan images and pre-trained models

Diagnosis of COVID-19 is necessary to prevent and control the disease. Deep learning methods have been considered a fast and accurate method. In this paper, by the parallel combination of three well-known pre-trained networks, we attempted to distinguish coronavirus-infected samples from healthy samples. The negative log-likelihood loss function has been used for model training. CT scan images in the SARS-CoV-2 dataset were used for diagnosis. The SARS-CoV-2 dataset contains 2482 images of lung CT scans, of which 1252 images belong to COVID-19-infected samples. The proposed model was close to …

A Transfer Learning Based Approach for Classification of COVID-19 and Pneumonia in CT Scan Imaging

The world is still overwhelmed by the spread of the COVID-19 virus. With over 250 Million infected cases as of November 2021 and affecting 219 countries and territories, the world remains in the pandemic period. Detecting COVID-19 using the deep learning method on CT scan images can play a vital role in assisting medical professionals and decision authorities in controlling the spread of the disease and providing essential support for patients. The convolution neural network is widely used in the field of large-scale image recognition. The current method of RT-PCR to diagnose COVID-19 is time-…

一种基于集成深度学习的COVID-19严重程度预测方法：使用胸部CT扫描

An Ensemble Deep Learning Approach for COVID-19 Severity Prediction Using Chest CT Scans

本研究提出一种基于集成深度学习的模型，结合切片函数、数据增强和测试时增强技术，利用STOIC数据集从胸部CT扫描预测COVID-19严重程度，取得了与复杂方法相当的效果并在STOIC2021挑战赛中获第四名。

CoRSAI: A System for Robust Interpretation of CT Scans of COVID-19 Patients Using Deep Learning

Analysis of chest CT scans can be used in detecting parts of lungs that are affected by infectious diseases such as COVID-19.Determining the volume of lungs affected by lesions is essential for formulating treatment recommendations and prioritizingpatients by severity of the disease. In this paper we adopted an approach based on using an ensemble of deep convolutionalneural networks for segmentation of slices of lung CT scans. Using our models we are able to segment the lesions, evaluatepatients dynamics, estimate relative volume of lungs affected by lesions and evaluate the lung damage stage.…

POSTER: Diagnosis of COVID-19 through Transfer Learning Techniques on CT Scans: A Comparison of Deep Learning Models

The novel coronavirus disease (COVID-19) constitutes a public health emergency globally. It is a deadly disease which has infected more than 230 million people worldwide. Therefore, early and unswerving detection of COVID-19 is necessary. Evidence of this virus is most commonly being tested by RT-PCR test. This test is not 100% reliable as it is known to give false positives and false negatives. Other methods like X-Ray images or CT scans show the detailed imaging of lungs and have been proven more reliable. This paper compares different deep learning models used to detect COVID-19 through tra…

推进三维CT扫描中的COVID-19检测

Advancing COVID-19 Detection in 3D CT Scans

提出一种基于ResNeSt50的3D CT扫描COVID-19检测模型，通过去除非肺部分降低计算成本，在COV19D竞赛中取得Macro F1 0.94，超越基线16%。

A Novel and Reliable Deep Learning Web-Based Tool to Detect COVID-19 Infection from Chest CT-Scan

The corona virus is already spread around the world in many countries, and it has taken many lives. Furthermore, the world health organization (WHO) has announced that COVID-19 has reached the global epidemic stage. Early and reliable diagnosis using chest CT-scan can assist medical specialists in vital circumstances. In this work, we introduce a computer aided diagnosis (CAD) web service to detect COVID- 19 online. One of the largest public chest CT-scan databases, containing 746 participants was used in this experiment. A number of well-known deep neural network architectures consisting of R…

Human-level COVID-19 Diagnosis from Low-dose CT Scans Using a Two-stage Time-distributed Capsule Network

Reverse transcription-polymerase chain reaction (RT-PCR) is currently the gold standard in COVID-19 diagnosis. It can, however, take days to provide the diagnosis, and false negative rate is relatively high. Imaging, in particular chest computed tomography (CT), can assist with diagnosis and assessment of this disease. Nevertheless, it is shown that standard dose CT scan gives significant radiation burden to patients, especially those in need of multiple scans. In this study, we consider low-dose and ultra-low-dose (LDCT and ULDCT) scan protocols that reduce the radiation exposure close to tha…

Robust Framework for COVID-19 Identification from a Multicenter Dataset of Chest CT Scans

The objective of this study is to develop a robust deep learning-based framework to distinguish COVID-19, Community-Acquired Pneumonia (CAP), and Normal cases based on chest CT scans acquired in different imaging centers using various protocols, and radiation doses. We showed that while our proposed model is trained on a relatively small dataset acquired from only one imaging center using a specific scanning protocol, the model performs well on heterogeneous test sets obtained by multiple scanners using different technical parameters. We also showed that the model can be updated via an unsuper…

CT-CAPS: Feature Extraction-based Automated Framework for COVID-19 Disease Identification from Chest CT Scans using Capsule Networks

The global outbreak of the novel corona virus (COVID-19) disease has drastically impacted the world and led to one of the most challenging crisis across the globe since World War II. The early diagnosis and isolation of COVID-19 positive cases are considered as crucial steps towards preventing the spread of the disease and flattening the epidemic curve. Chest Computed Tomography (CT) scan is a highly sensitive, rapid, and accurate diagnostic technique that can complement Reverse Transcription Polymerase Chain Reaction (RT-PCR) test. Recently, deep learning-based models, mostly based on Convolu…

TeliNet: Classifying CT scan images for COVID-19 diagnosis

COVID-19 has led to hundreds of millions of cases and millions of deaths worldwide since its onset. The fight against this pandemic is on-going on multiple fronts. While vaccinations are picking up speed, there are still billions of unvaccinated people. In this fight against the virus, diagnosis of the disease and isolation of the patients to prevent any spread play a huge role. Machine Learning approaches have assisted in the diagnosis of COVID-19 cases by analyzing chest X-rays and CT-scan images of patients. To push algorithm development and research in this direction of radiological diagno…

Targeted Self Supervision for Classification on a Small COVID-19 CT Scan Dataset

Traditionally, convolutional neural networks need large amounts of data labelled by humans to train. Self supervision has been proposed as a method of dealing with small amounts of labelled data. The aim of this study is to determine whether self supervision can increase classification performance on a small COVID-19 CT scan dataset. This study also aims to determine whether the proposed self supervision strategy, targeted self supervision, is a viable option for a COVID-19 imaging dataset. A total of 10 experiments are run comparing the classification performance of the proposed method of sel…

Study of Different Deep Learning Approach with Explainable AI for Screening Patients with COVID-19 Symptoms: Using CT Scan and Chest X-ray Image Dataset

The outbreak of COVID-19 disease caused more than 100,000 deaths so far in the USA alone. It is necessary to conduct an initial screening of patients with the symptoms of COVID-19 disease to control the spread of the disease. However, it is becoming laborious to conduct the tests with the available testing kits due to the growing number of patients. Some studies proposed CT scan or chest X-ray images as an alternative solution. Therefore, it is essential to use every available resource, instead of either a CT scan or chest X-ray to conduct a large number of tests simultaneously. As a result, t…

Classification of COVID-19 Patients with their Severity Level from Chest CT Scans using Transfer Learning

Background and Objective: During pandemics, the use of artificial intelligence (AI) approaches combined with biomedical science play a significant role in reducing the burden on the healthcare systems and physicians. The rapid increment in cases of COVID-19 has led to an increase in demand for hospital beds and other medical equipment. However, since medical facilities are limited, it is recommended to diagnose patients as per the severity of the infection. Keeping this in mind, we share our research in detecting COVID-19 as well as assessing its severity using chest-CT scans and Deep Learning…

Comparative performance analysis of the ResNet backbones of Mask RCNN to segment the signs of COVID-19 in chest CT scans

COVID-19 has been detrimental in terms of the number of fatalities and rising number of critical patients across the world. According to the UNDP (United National Development Programme) Socio-Economic programme, aimed at the COVID-19 crisis, the pandemic is far more than a health crisis: it is affecting societies and economies at their core. There has been greater developments recently in the chest X-ray-based imaging technique as part of the COVID-19 diagnosis especially using Convolution Neural Networks (CNN) for recognising and classifying images. However, given the limitation of supervised…

Screening COVID-19 Based on CT/CXR Images & Building a Publicly Available CT-scan Dataset of COVID-19

The rapid outbreak of COVID-19 threatens humans life all around the world. Due to insufficient diagnostic infrastructures, developing an accurate, efficient, inexpensive, and quick diagnostic tool is of great importance. As chest radiography, such as chest X-ray (CXR) and CT computed tomography (CT), is a possible way for screening COVID-19, developing an automatic image classification tool is immensely helpful for detecting the patients with COVID-19. To date, researchers have proposed several different screening methods; however, none of them could achieve a reliable and highly sensitive per…

2D and 3D CNN-Based Fusion Approach for COVID-19 Severity Prediction from 3D CT-Scans

Since the appearance of Covid-19 in late 2019, Covid-19 has become an active research topic for the artificial intelligence (AI) community. One of the most interesting AI topics is Covid-19 analysis of medical imaging. CT-scan imaging is the most informative tool about this disease. This work is part of the 3nd COV19D competition for Covid-19 Severity Prediction. In order to deal with the big gap between the validation and test results that were shown in the previous version of this competition, we proposed to combine the prediction of 2D and 3D CNN predictions. For the 2D CNN approach, we pro…

Explainable COVID-19 Detection Using Chest CT Scans and Deep Learning

This paper explores how well deep learning models trained on chest CT images can diagnose COVID-19 infected people in a fast and automated process. To this end, we adopt advanced deep network architectures and propose a transfer learning strategy using custom-sized input tailored for each deep architecture to achieve the best performance. We conduct extensive sets of experiments on two CT image datasets, namely the SARS-CoV-2 CT-scan and the COVID19-CT. The obtained results show superior performances for our models compared with previous studies, where our best models achieve average accuracy,…

Enhancing COVID-19 Severity Analysis through Ensemble Methods

Computed Tomography (CT) scans provide a detailed image of the lungs, allowing clinicians to observe the extent of damage caused by COVID-19. The CT severity score (CTSS) based scoring method is used to identify the extent of lung involvement observed on a CT scan. This paper presents a domain knowledge-based pipeline for extracting regions of infection in COVID-19 patients using a combination of image-processing algorithms and a pre-trained UNET model. The severity of the infection is then classified into different categories using an ensemble of three machine-learning models: Extreme Gradien…

通过可解释的不确定性贝叶斯量化增强3D COVID-19肺炎CT扫描的诊断

Enhancing Diagnostic in 3D COVID-19 Pneumonia CT-scans through Explainable Uncertainty Bayesian Quantification

本文提出利用贝叶斯神经网络对3D CT扫描中的COVID-19肺炎进行分类，通过不确定性量化与SHAP可解释性提升诊断准确性，轻量级架构达到96%准确率。

An Explainable AI System for Automated COVID-19 Assessment and Lesion Categorization from CT-scans

COVID-19 infection caused by SARS-CoV-2 pathogen is a catastrophic pandemic outbreak all over the world with exponential increasing of confirmed cases and, unfortunately, deaths. In this work we propose an AI-powered pipeline, based on the deep-learning paradigm, for automated COVID-19 detection and lesion categorization from CT scans. We first propose a new segmentation module aimed at identifying automatically lung parenchyma and lobes. Next, we combined such segmentation network with classification networks for COVID-19 identification and lesion categorization. We compare the obtained class…

Dense Regression Activation Maps For Lesion Segmentation in CT scans of COVID-19 patients

Automatic lesion segmentation on thoracic CT enables rapid quantitative analysis of lung involvement in COVID-19 infections. However, obtaining a large amount of voxel-level annotations for training segmentation networks is prohibitively expensive. Therefore, we propose a weakly-supervised segmentation method based on dense regression activation maps (dRAMs). Most weakly-supervised segmentation approaches exploit class activation maps (CAMs) to localize objects. However, because CAMs were trained for classification, they do not align precisely with the object segmentations. Instead, we produce…

Common pitfalls and recommendations for using machine learning to detect and prognosticate for COVID-19 using chest radiographs and CT scans

Machine learning methods offer great promise for fast and accurate detection and prognostication of COVID-19 from standard-of-care chest radiographs (CXR) and computed tomography (CT) images. Many articles have been published in 2020 describing new machine learning-based models for both of these tasks, but it is unclear which are of potential clinical utility. In this systematic review, we search EMBASE via OVID, MEDLINE via PubMed, bioRxiv, medRxiv and arXiv for published papers and preprints uploaded from January 1, 2020 to October 3, 2020 which describe new machine learning models for the d…

HRCTCov19——用于COVID-19诊断与鉴别的高分辨率胸部CT扫描图像数据集

HRCTCov19 -- A High-Resolution Chest CT Scan Image Dataset for COVID-19 Diagnosis and Differentiation

本文提出HRCTCov19高分辨率胸部CT数据集，包含395名患者的181,106张图像及GGO、铺路石征、空气空间实变和阴性四类标签，旨在支持基于AI的COVID-19诊断与鉴别研究。

Radiologist-Level COVID-19 Detection Using CT Scans with Detail-Oriented Capsule Networks

Radiographic images offer an alternative method for the rapid screening and monitoring of Coronavirus Disease 2019 (COVID-19) patients. This approach is limited by the shortage of radiology experts who can provide a timely interpretation of these images. Motivated by this challenge, our paper proposes a novel learning architecture, called Detail-Oriented Capsule Networks (DECAPS), for the automatic diagnosis of COVID-19 from Computed Tomography (CT) scans. Our network combines the strength of Capsule Networks with several architecture improvements meant to boost classification accuracies. Firs…

A 3D CNN Network with BERT For Automatic COVID-19 Diagnosis From CT-Scan Images

We present an automatic COVID1-19 diagnosis framework from lung CT-scan slice images. In this framework, the slice images of a CT-scan volume are first proprocessed using segmentation techniques to filter out images of closed lung, and to remove the useless background. Then a resampling method is used to select one or multiple sets of a fixed number of slice images for training and validation. A 3D CNN network with BERT is used to classify this set of selected slice images. In this network, an embedding feature is also extracted. In cases where there are more than one set of slice images in a …

COVID-19 identification from volumetric chest CT scans using a progressively resized 3D-CNN incorporating segmentation, augmentation, and class-rebalancing

The novel COVID-19 is a global pandemic disease overgrowing worldwide. Computer-aided screening tools with greater sensitivity is imperative for disease diagnosis and prognosis as early as possible. It also can be a helpful tool in triage for testing and clinical supervision of COVID-19 patients. However, designing such an automated tool from non-invasive radiographic images is challenging as many manually annotated datasets are not publicly available yet, which is the essential core requirement of supervised learning schemes. This article proposes a 3D Convolutional Neural Network (CNN)-based…

纵向CT扫描中用于COVID-19感染量化的交互式分割

Interactive Segmentation for COVID-19 Infection Quantification on Longitudinal CT scans

针对纵向CT中COVID-19病灶分割问题，提出融合参考时间点、既往分割与用户涂鸦反馈的单网络交互式模型，实验证明其优于静态版本。

注意力增强的U-Net用于准确分割CT扫描中感染的肺部区域

Attention-Enhanced U-Net for Accurate Segmentation of COVID-19 Infected Lung Regions in CT Scans

本文提出一种结合注意力机制的改进U-Net模型，用于提高CT扫描中新冠肺部感染区域分割的准确性，实验结果显示其在Dice系数和IoU指标上均优于其他方法。

在深度 CNN 中使用多头通道注意力的自动化 COVID-19 CT 图像分类

Automated COVID-19 CT Image Classification using Multi-head Channel Attention in Deep CNN

提出融合多头通道注意力与加权全局平均池化的改进 Xception，用于自动分类 COVID-19 CT 图像，并在常用数据集上达到 96.99% 准确率。

Classification of COVID-19 in CT Scans using Multi-Source Transfer Learning

Since December of 2019, novel coronavirus disease COVID-19 has spread around the world infecting millions of people and upending the global economy. One of the driving reasons behind its high rate of infection is due to the unreliability and lack of RT-PCR testing. At times the turnaround results span as long as a couple of days, only to yield a roughly 70% sensitivity rate. As an alternative, recent research has investigated the use of Computer Vision with Convolutional Neural Networks (CNNs) for the classification of COVID-19 from CT scans. Due to an inherent lack of available COVID-19 CT da…

Classification of COVID-19 via Homology of CT-SCAN

In this worldwide spread of SARS-CoV-2 (COVID-19) infection, it is of utmost importance to detect the disease at an early stage especially in the hot spots of this epidemic. There are more than 110 Million infected cases on the globe, sofar. Due to its promptness and effective results computed tomography (CT)-scan image is preferred to the reverse-transcription polymerase chain reaction (RT-PCR). Early detection and isolation of the patient is the only possible way of controlling the spread of the disease. Automated analysis of CT-Scans can provide enormous support in this process. In this art…

基于肺部CT扫描与DenseNet架构的COVID19预测

COVID19 Prediction Based On CT Scans Of Lungs Using DenseNet Architecture

本文提出基于DenseNet卷积神经网络分析肺部CT扫描，在患者确诊后一个月内预测COVID19感染严重程度，以辅助医生判断病情是否可能恶化至插管或死亡。

Data Augmentation and CNN Classification For Automatic COVID-19 Diagnosis From CT-Scan Images On Small Dataset

We present an automatic COVID1-19 diagnosis framework from lung CT images. The focus is on signal processing and classification on small datasets with efforts putting into exploring data preparation and augmentation to improve the generalization capability of the 2D CNN classification models. We propose a unique and effective data augmentation method using multiple Hounsfield Unit (HU) normalization windows. In addition, the original slice image is cropped to exclude background, and a filter is applied to filter out closed-lung images. For the classification network, we choose to use 2D Densen…

A Light CNN for detecting COVID-19 from CT scans of the chest

OVID-19 is a world-wide disease that has been declared as a pandemic by the World Health Organization. Computer Tomography (CT) imaging of the chest seems to be a valid diagnosis tool to detect COVID-19 promptly and to control the spread of the disease. Deep Learning has been extensively used in medical imaging and convolutional neural networks (CNNs) have been also used for classification of CT images. We propose a light CNN design based on the model of the SqueezeNet, for the efficient discrimination of COVID-19 CT images with other CT images (community-acquired pneumonia and/or healthy imag…

Online unsupervised Learning for domain shift in COVID-19 CT scan datasets

Neural networks often require large amounts of expert annotated data to train. When changes are made in the process of medical imaging, trained networks may not perform as well, and obtaining large amounts of expert annotations for each change in the imaging process can be time consuming and expensive. Online unsupervised learning is a method that has been proposed to deal with situations where there is a domain shift in incoming data, and a lack of annotations. The aim of this study is to see whether online unsupervised learning can help COVID-19 CT scan classification models adjust to slight…

一种用于增强计算机断层扫描（CT）图像中COVID-19检测的混合深度学习CNN模型

A Hybrid Deep Learning CNN Model for Enhanced COVID-19 Detection from Computed Tomography (CT) Scan Images

本研究提出一种结合VGG16、DenseNet121和MobileNetV2特征提取与PCA降维的混合深度学习CNN模型，通过SVC分类实现了98.93%准确率的COVID-19 CT图像检测。

CovidExpert: A Triplet Siamese Neural Network framework for the detection of COVID-19

Patients with the COVID-19 infection may have pneumonia-like symptoms as well as respiratory problems which may harm the lungs. From medical images, coronavirus illness may be accurately identified and predicted using a variety of machine learning methods. Most of the published machine learning methods may need extensive hyperparameter adjustment and are unsuitable for small datasets. By leveraging the data in a comparatively small dataset, few-shot learning algorithms aim to reduce the requirement of large datasets. This inspired us to develop a few-shot learning model for early detection of …

Accurate and Rapid Diagnosis of COVID-19 Pneumonia with Batch Effect Removal of Chest CT-Scans and Interpretable Artificial Intelligence

COVID-19 is a virus with high transmission rate that demands rapid identification of the infected patients to reduce the spread of the disease. The current gold-standard test, Reverse-Transcription Polymerase Chain Reaction (RT-PCR), has a high rate of false negatives. Diagnosing from CT-scan images as a more accurate alternative has the challenge of distinguishing COVID-19 from other pneumonia diseases. Artificial intelligence can help radiologists and physicians to accelerate the process of diagnosis, increase its accuracy, and measure the severity of the disease. We designed a new interpret…

Harmony-Search and Otsu based System for Coronavirus Disease (COVID-19) Detection using Lung CT Scan Images

Pneumonia is one of the foremost lung diseases and untreated pneumonia will lead to serious threats for all age groups. The proposed work aims to extract and evaluate the Coronavirus disease (COVID-19) caused pneumonia infection in lung using CT scans. We propose an image-assisted system to extract COVID-19 infected sections from lung CT scans (coronal view). It includes following steps: (i) Threshold filter to extract the lung region by eliminating possible artifacts; (ii) Image enhancement using Harmony-Search-Optimization and Otsu thresholding; (iii) Image segmentation to extract infected r…

CovSegNet: A Multi Encoder-Decoder Architecture for Improved Lesion Segmentation of COVID-19 Chest CT Scans

Automatic lung lesions segmentation of chest CT scans is considered a pivotal stage towards accurate diagnosis and severity measurement of COVID-19. Traditional U-shaped encoder-decoder architecture and its variants suffer from diminutions of contextual information in pooling/upsampling operations with increased semantic gaps among encoded and decoded feature maps as well as instigate vanishing gradient problems for its sequential gradient propagation that result in sub-optimal performance. Moreover, operating with 3D CT-volume poses further limitations due to the exponential increase of compu…

COVID-19 CT扫描与未整理报告的零样本多标签分类的实证分析

An Empirical Analysis for Zero-Shot Multi-Label Classification on COVID-19 CT Scans and Uncurated Reports

本研究利用医院非结构化数据和CT扫描的细粒度细节，基于对比视觉语言学习进行零样本多标签分类，辅助放射科医生检测肺栓塞及肺部复杂病变，为医学多模态预训练中细粒度任务提供实证分析。

医学图像分析AI中的域适应、可解释性与公平性：基于三维胸部CT扫描的COVID-19诊断

Domain adaptation, Explainability & Fairness in AI for Medical Image Analysis: Diagnosis of COVID-19 based on 3-D Chest CT-scans

本文介绍了2024年CVPR研讨会框架下举办的第四届DEF-AI-MIA COV19D竞赛，包含新冠检测与域适应两项挑战，基于COV19-CT-DB胸部CT数据，公布了基线模型及对应性能。

Improving Automated COVID-19 Grading with Convolutional Neural Networks in Computed Tomography Scans: An Ablation Study

Amidst the ongoing pandemic, several studies have shown that COVID-19 classification and grading using computed tomography (CT) images can be automated with convolutional neural networks (CNNs). Many of these studies focused on reporting initial results of algorithms that were assembled from commonly used components. The choice of these components was often pragmatic rather than systematic. For instance, several studies used 2D CNNs even though these might not be optimal for handling 3D CT volumes. This paper identifies a variety of components that increase the performance of CNN-based algorit…

Comparative study of deep learning methods for the automatic segmentation of lung, lesion and lesion type in CT scans of COVID-19 patients

Recent research on COVID-19 suggests that CT imaging provides useful information to assess disease progression and assist diagnosis, in addition to help understanding the disease. There is an increasing number of studies that propose to use deep learning to provide fast and accurate quantification of COVID-19 using chest CT scans. The main tasks of interest are the automatic segmentation of lung and lung lesions in chest CT scans of confirmed or suspected COVID-19 patients. In this study, we compare twelve deep learning algorithms using a multi-center dataset, including both open-source and in…

使用带有注意力机制的新型 EfficientNet 从肺部 CT 扫描中检测 COVID-19

COVID-19 detection from pulmonary CT scans using a novel EfficientNet with attention mechanism

本文提出 EfficientNet-AM 流程，通过在 EfficientNet 中加入注意力机制，从原始肺部 CT 图像中高效检测 COVID-19，无需预处理或肺部分割，并在 DEF-AI-MIA COV19D 竞赛验证集上优于以往方法。

Strong Baseline and Bag of Tricks for COVID-19 Detection of CT Scans

This paper investigates the application of deep learning models for lung Computed Tomography (CT) image analysis. Traditional deep learning frameworks encounter compatibility issues due to variations in slice numbers and resolutions in CT images, which stem from the use of different machines. Commonly, individual slices are predicted and subsequently merged to obtain the final result; however, this approach lacks slice-wise feature learning and consequently results in decreased performance. We propose a novel slice selection method for each CT dataset to address this limitation, effectively fi…