In protoplanetary discs and planetary atmospheres, dust grains coagulate to form fractal dust aggregates. The geometric cross-section of these aggregates is a crucial parameter characterizing aerodynamical friction, collision rates, and opacities. However, numerical measurements of the cross-section are often time-consuming as aggregates exhibit complex shapes. In this study, we derive a novel analytic expression for geometric cross-sections of fractal aggregates. If an aggregate consists of $N$ monomers of radius $R_0$, its geometric cross-section $G$ is expressed as \begin{equation} \frac{G}{NπR_0^2}=\frac{A}{1+(N-1)\tildeσ}, \nonumber
\end{equation} where $\tildeσ$ is an overlapping efficiency, and $A$ is a numerical factor connecting the analytic expression to the small non-fractal cluster limit. The overlapping efficiency depends on the fractal dimension, fractal prefactor, and $N$ of the aggregate, and its analytic expression is derived as well. The analytic expressions successfully reproduce numerically measured cross-sections of aggregates. We also find that our expressions are compatible with the mean-field light scattering theory of aggregates in the geometrical optics limit. The analytic expressions greatly simplify an otherwise tedious calculation and will be useful in model calculations of fractal grain growth in protoplanetary discs and planetary atmospheres.
The first known interstellar object, 1I/2017 U1 'Oumuamua, displayed such unusual properties that its origin remains a subject of much debate. We propose that 'Oumuamua's properties could be explained as those of a fractal dust aggregate (a "dust bunny") formed in the inner coma of a fragmenting exo-Oort cloud comet. Such fragments could serve as accretion sites by accumulating dust particles, resulting in the formation of a fractal aggregate. The fractal aggregate eventually breaks off from the fragment due to hydrodynamic stress. With their low density and tenuously bound orbits, most of the…
The first known interstellar object 'Oumuamua exhibited a nongravitational acceleration that appeared inconsistent with cometary outgassing, leaving radiation pressure as the most likely force. Bar the alien lightsail hypothesis, an ultra-low density due to a fractal structure might also explain the acceleration of 'Oumuamua by radiation pressure (Moro-Martin 2019). In this paper we report a decrease in 'Oumuamua's rotation period based on ground-based observations, and show that this spin-down can be explained by the YORP effect if 'Oumuamua is indeed a fractal body with the ultra-low density…
The Influence of the Fractal Dimension on Dust Evolution in Protoplanetary Disks
Institut für Theoretische Astrophysik, Zentrum für Astronomie der Universität Heidelberg（海德堡大学天体物理中心理论天体物理研究所）；Anton Pannekoek Institute for Astronomy, University of Amsterdam（阿姆斯特丹大学安顿·潘内科克天文学研究所）
Despite rapidly growing disk observations, it remains a mystery what primordial dust aggregates look like and what the physical and chemical properties of their constituent grains (monomers) are in young planet-forming disks. Confrontation of models with observations to answer this mystery has been a notorious task because we have to abandon a commonly used assumption, perfectly spherical grains, and take into account particles with complex morphology. In this Letter, we present the first thorough comparison between near-infrared scattered light of the young planet-forming disk around IM Lup a…
Optical properties of dust aggregates are important at various astrophysical environments. To find a reliable approximation method for optical properties of dust aggregates, we calculate the opacity and the asymmetry parameter of dust aggregates by using a rigorous numerical method, the T-Matrix Method (TMM), and then the results are compared to those obtained by approximate methods; the Rayleigh-Gans-Debye (RGD) theory, the effective medium theory (EMT), and the distribution of hollow spheres method (DHS). First of all, we confirm that the RGD theory breaks down when multiple scattering is im…
In protoplanetary disks, micron-sized dust grains coagulate to form highly porous dust aggregates. Because the optical properties of these aggregates are not completely understood, it is important to investigate how porous dust aggregates scatter light. In this study, the light scattering properties of porous dust aggregates were calculated using a rigorous method, the T-matrix method, and the results were then compared with those obtained using the Rayleigh-Gans-Debye (RGD) theory and Mie theory with the effective medium approximation (EMT). The RGD theory is applicable to moderately large ag…
1I/'Oumuamua is the first interstellar interloper to be detected, and it shows a non-gravitational acceleration that cannot be accounted for by outgassing, given the strict upper limits of outgassing evident from {\it Spitzer} observations, unless the relative abundances of the common volatiles are very different to those in comets. As an alternative, it has been suggested that its peculiar acceleration is due to radiation pressure, requiring a planar-sheet geometry of an unknown natural or artificial origin. Here we assess whether or not the internal structure of 1I/'Oumuamua, rather than its…
We introduce a possible disruption mechanism of dust grains in planet formation by their spinning motion. This mechanism has been discussed as rotational disruption for the interstellar dust grains. We theoretically calculate whether porous dust aggregates can be disrupted by their spinning motion and if it prohibits dust growth in protoplanetary disks. We assume radiative torque and gas-flow torque as driving sources of the spinning motion, assume that dust aggregates reach a steady-state rigid rotation, and compare the obtained tensile stress due to the centrifugal force with their tensile s…
The gas-driven dust activity of comets is still an unresolved question in cometary science. In the past, it was believed that comets are dirty snowballs and that the dust is ejected when the ice retreats. However, thanks to the various space missions to comets, it has become evident that comets have a much higher dust-to-ice ratio than previously thought and that most of the dust mass is ejected in large particles. Here we report on new comet-simulation experiments dedicated to the study of the ejection of dust aggregates caused by the sublimation of solid water ice. We find that dust ejection…
Dust coagulation in a protoplanetary disk is the first step of planetesimal formation. However, a pathway from dust aggregates to planetesimals remains unclear. Both numerical simulations and laboratory experiments have suggested the importance of dust structure in planetesimal formation, but it is not well constrained by observations. We study how dust structure and porosity alters polarimetric images at millimeter wavelength by performing 3D radiative transfer simulations. Aggregates with different porosity and fractal dimension are considered. As a result, we find that dust aggregates with …
We study the dust motion at the surface layer of protoplanetary disks. Dust grains in surface layer migrate outward due to angular momentum transport via gas-drag force induced by the stellar radiation pressure. In this study, we calculate mass flux of the outward motion of compact grains and porous dust aggregates by the radiation pressure. The radiation pressure force for porous dust aggregates is calculated using the T-Matrix Method for the Clusters of Spheres. First, we confirm that porous dust aggregates are forced by strong radiation pressure even if they grow to be larger aggregates in …
Context: Bouncing collisions of dust aggregates within the protoplanetary may have a significant impact on the growth process of planetesimals. Yet, the conditions that result in bouncing are not very well understood. Existing simulations studying the bouncing behavior used aggregates with an artificial, very regular internal structure. Aims: Here, we study the bouncing behavior of sub-mm dust aggregates that are constructed applying different sample preparation methods. We analyze how the internal structure of the aggregate alters the collisional outcome and determine the influence of aggrega…
The experiments presented aim to measure the outcome of collisions between sub-mm sized protoplanetary dust aggregate analogues. We also observed the clusters formed from these aggregates and their collision behaviour. The experiments were performed at the drop tower in Bremen. The protoplanetary dust analogue materials were micrometre-sized monodisperse and polydisperse SiO$_2$ particles prepared into aggregates with sizes between 120~$μ$m and 250~$μ$m. One of the dust samples contained aggregates that were previously compacted through repeated bouncing. During three flights of 9~s of microgr…
The collisional and sticking properties of sub-mm-sized aggregates composed of protoplanetary dust analogue material are measured, including the statistical threshold velocity between sticking and bouncing, their surface energy and tensile strength within aggregate clusters. We performed an experiment on the REXUS 12 suborbital rocket. The protoplanetary dust analogue materials were micrometre-sized monodisperse and polydisperse SiO2 particles prepared into aggregates with sizes around 120 $μ$m and 330 $μ$m, respectively and volume filling factors around 0.37. During the experimental run of 15…
A consensus view on the formation of planetesimals is now exposed to a threat, since recent numerical studies on the mechanical properties of dust aggregates tend to dispute the conceptual picture that submicrometer-sized grains conglomerate into planetesimals in protoplanetary disks. With the advent of precise laboratory experiments and extensive computer simulations on the interaction between elastic spheres comprising dust aggregates, we revisit a model for the tensile strength of dust aggregates consisting of small elastic grains. In the framework of contact mechanics and fracture mechanic…
Planetesimal formation is one of the most important unsolved problems in planet formation theory. In particular, rocky planetesimal formation is difficult because silicate dust grains are easily broken when they collide. Recently, it has been proposed that they can grow as porous aggregates when their monomer radius is smaller than $\sim$ 10 nm, which can also avoid the radial drift toward the central star. However, the stability of a layer composed of such porous silicate dust aggregates has not been investigated. Therefore, we investigate the gravitational instability of this dust layer. To …
Porosity evolution of dust aggregates is crucial in understanding dust evolution in protoplanetary disks. In this study, we present useful tools to study the coagulation and porosity evolution of dust aggregates. First, we present a new numerical method for simulating dust coagulation and porosity evolution as an extension of the conventional Smoluchowski equation. This method follows the evolution of the mean porosity for each aggregate mass simultaneously with the evolution of the mass distribution function. This method reproduces the results of previous Monte Carlo simulations with much les…
Comets are thought to preserve almost pristine dust particles, thus providing a unique sample of the properties of the early solar nebula. The microscopic properties of this dust played a key part in particle aggregation during the formation of the Solar System. Cometary dust was previously considered to comprise irregular, fluffy agglomerates on the basis of interpretations of remote observations in the visible and infrared and the study of chondritic porous interplanetary dust particles that were thought, but not proved, to originate in comets. Although the dust returned by an earlier missio…
We investigated fundamental processes of collisional sticking and fragmentation of dust aggregates by carrying out N-body simulations of submicron-sized icy dust monomers. We examined the condition for collisional growth of two colliding dust aggregates in a wide range of the mass ratio, 1-64. We found that the mass transfer from a larger dust aggregate to a smaller one is a dominant process in collisions with a mass ratio of 2-30 and impact velocity of \approx 30-170 m s^-1. As a result, the critical velocity, v_fra, for fragmentation of the largest body is considerably reduced for such unequ…
Dust coagulation in interstellar space and protoplanetary disks is usually treated as one of 2 extreme cases: Particle-Cluster Aggregation and Cluster-Cluster Aggregation. In this paper we study the process of hierarchical growth, where aggregates are built from significantly smaller aggregates (but not monomers). We show that this process can be understood as a modified, PCA-like process that produces porous, but non-fractal particles whose filling factor is chiefly determined by the porosity of the building blocks. We also show that in a coagulation environment where relative velocities are …
Recently it is proposed that porous icy dust aggregates are formed by pairwise accretion of dust aggregates beyond the snowline. We calculate the equilibrium random velocity of porous dust aggregates taking into account mutual gravitational scattering, collisions, gas drag, and turbulent stirring and scattering. We find that the disk of porous dust aggregates becomes gravitationally unstable as they evolve through gravitational compression in the minimum-mass solar nebula model for a reasonable range of turbulence strength, which leads to rapid formation of planetesimals.
The Cometary Secondary Ion Mass Analyzer (COSIMA) onboard ESA's Rosetta orbiter has revealed that dust particles in the coma of Comet 67P/Churyumov-Gerasimenko are aggregates of small grains. We study the morphological, elastic, and electric properties of dust aggregates in the coma of Comet 67P/Churyumov-Gerasimenko using optical microscopic images taken by the COSIMA instrument. Dust aggregates in COSIMA images are well represented as fractals in harmony with morphological data from MIDAS (Micro-Imaging Dust Analysis System) and GIADA (Grain Impact Analyzer and Dust Accumulator) onboard Rose…
We conducted micro-gravity experiments to study the outcome of collisions between sub-mm-sized dust agglomerates consisting of μm-sized SiO2 monomer grains at velocities of several cm/s. Prior to the experiments, we used X-ray computer tomography (nano-CT) imaging to study the internal structure of these dust agglomerates and found no rim compaction so that their collision behavior is not governed by preparation-caused artefacts. We found that collisions between these dust aggregates can lead either to sticking or to bouncing, depending mostly on the impact velocity. While previous collision m…
Highly porous dust aggregates can break through the radial drift barrier, but previous studies assumed disks in their later stage, where the disks have a very small mass and low temperature. In contrast, dust coagulation should begin in the very early stage such as the disk formation stage because the growth timescale of dust is shorter than the disk formation timescale if there is no process to suppress the collisional growth of dust. We investigate the possibility of planetesimal formation via direct collisional growth in the very early stage of a protoplanetary disk. We show that, in the ve…
In a set of 16 drop tower experiments the motion of sub-mm to mm-sized particles under microgravity was observed. Illumination by a halogen lamp induced acceleration of the particles due to photophoresis. Photophoresis on dust-free chondrules, on chondrules, glass spheres and metal spheres covered with SiC dust and on pure SiC dust aggregates was studied. This is the first time that photophoretic motion of mm-sized particles has been studied experimentally. The absolute values for the photophoretic force are consistent with theoretical expectations for spherical particles. The strength of the …
In the recent years we have performed various experiments on the collision dynamics of highly porous dust aggregates and although we now have a comprehensive picture of the micromechanics of those aggregates, the macroscopic understanding is still lacking. We are therefore developing a mechanical model to describe dust aggregate collisions with macroscopic parameters like tensile strength, compressive strength and shear strength. For one well defined dust sample material, the tensile and compressive strength were measured in a static experiment and implemented in a Smoothed Particle Hydrodynam…
Geometrical cross sections of dust aggregates determine their coupling with disk gas, which governs their motions in protoplanetary disks. Collisional outcomes also depend on geometrical cross sections of initial aggregates. In the previous paper, we performed three-dimensional N-body simulations of sequential collisions of aggregates composed of a number of sub-micron-sized icy particles and examined radii of gyration (and bulk densities) of the obtained aggregates. We showed that collisional compression of aggregates is not efficient and that aggregates remain fluffy. In the present study, w…
We consider the dynamics of porous icy dust aggregates in a turbulent gas disk and investigate the stability of the disk. We evaluate the random velocity of porous dust aggregates by considering their self-gravity, collisions, aerodynamic drag, turbulent stirring and scattering due to gas. We extend our previous work by introducing the anisotropic velocity dispersion and the relaxation time of the random velocity. We find the minimum mass solar nebular model to be gravitationally unstable if the turbulent viscosity parameter $α$ is less than about $4 \times 10^{-3}$. The upper limit of $α$ for…
The most successful model of comet dust presents comet particles as aggregates of submicron grains. It qualitatively explains the spectral and angular change in the comet brightness and polarization and is consistent with the thermal infrared data and composition of the comet dust obtained {\it in situ} for comet 1P/Halley. However, it experiences some difficulties in providing a quantitative fit to the observational data. Here we present a model that considers comet dust as a mixture of aggregates and compact particles. The model is based on the Giotto and Stardust mission findings that both …
The Physics of Protoplanetesimal Dust Agglomerates. III. Compaction in Multiple Collisions
为了研究原行星尘埃聚集体的演化，我们进行了多达2600次的实验，这些实验是在单一的、高度多孔的尘埃聚集体和固体板之间进行的。粉尘聚集体由直径为1.5 $μ$ m的球形SiO $_2$颗粒组成，初始体积填充因子（材料的体积分数）为$ϕ_0=0.15$。将骨料放在振动基板上，并因此以0.2 m s $^{-1}$的平均速度与板进行多次碰撞。通过高速摄像机观察灰尘聚集体，以测量它们的尺寸，其尺寸随着时间的推移明显减小，作为它们压实的量度。在1000次碰撞后，体积填充因子增加了2倍，而在$\sim2000$碰撞后，它收敛到$ϕ\approx0.36$的平衡。在少数实验中，聚集体碎裂，虽然碰撞速度远低于$\sim1$ m s $^{-1}$的典型碎裂阈值。聚集体的致密化影响着原行星状星云中尘埃聚集体的表面积与质量比，从而影响着尘埃聚集体的动力学行为和相对速度。此外，宏观材料参数，即拉伸强度，剪切强度和压缩强度，改变了压实的聚集体，这对它们的进一步碰撞行为的影响。发生碎裂需要重新评估碎裂阈值速度。
Comets are thought to have information about the formation process of our solar system. Recently, detailed information about comet 67P/Churyumov-Gerasimenko has been found by a spacecraft mission Rosetta. It is remarkable that its tensile strength was estimated. In this paper, we measure and formulate the tensile strength of porous dust aggregates using numerical simulations, motivated by porous dust aggregation model of planetesimal formation. We perform three-dimensional numerical simulations using a monomer interaction model with periodic boundary condition. We stretch out a dust aggregate …
Context: The size of the constituent particles (monomers) of dust aggregates is one of the most uncertain parameters directly affecting collisional growth of aggregates in planet-forming disks. Despite its importance, the monomer size has not yet been meaningfully constrained by disk observations. Aims: We attempt to derive the monomer size from optical and near-infrared (IR) polarimetric observations of planet-forming disks. Methods: We perform a comprehensive parameter survey on the degree of linear polarization of light scattered by dust aggregates, using an exact numerical method called th…
Collisions of mm-size dust aggregates play a crucial role in the early phases of planet formation. We developed a laboratory setup to observe collisions of dust aggregates levitating at mbar pressures and elevated temperatures of 800 K. We report on collisions between basalt dust aggregates of from 0.3 to 5 mm in size at velocities between 0.1 and 15 cm/s. Individual grains are smaller than 25 \mum in size. We find that for all impact energies in the studied range sticking occurs at a probability of 32.1 \pm 2.5% on average. In general, the sticking probability decreases with increasing impact…
In protoplanetary disks micron-size dust grains coagulate to form larger structures with complex shapes and compositions. The coagulation process changes the absorption and scattering properties of particles in the disk in significant ways. To properly interpret observations of protoplanetary disks and to place these observations in the context of the first steps of planet formation, it is crucial to understand the optical properties of these complex structures. We derive the optical properties of dust aggregates using detailed computations of aggregate structures and compare these computa- ti…
More than a decade of dedicated experimental work on the collisional physics of protoplanetary dust has brought us to a point at which the growth of dust aggregates can - for the first time - be self-consistently and reliably modelled. In this article, the emergent collision model for protoplanetery dust aggregates (Güttler et al. 2010) as well as the numerical model for the evolution of dust aggregates in protoplanetary disks (Zsom et al. 2010) are reviewed. It turns out that, after a brief period of rapid collisional growth of fluffy dust aggregates to sizes of a few centimeters, the protopl…
The first macroscopic bodies in protoplanetary disks are dust aggregates. We report on a number of experimental studies with dust aggregates formed from micron-size quartz grains. We confirm in laboratory collision experiments an earlier finding that producing macroscopic bodies by the random impact of sub-mm aggregates results in a well-defined upper-filling factor of 0.31 \pm 0.01. Compared to earlier experiments, we increase the projectile mass by about a factor of 100. The collision experiments also show that a highly porous dust-aggregate can retain its highly porous core if collisions ge…
Aims: The aim of this work is to gain a deeper insight into how much different aggregate types are affected by erosion. Especially, it is important to study the influence of the velocity of the impacting projectiles. We also want to provide models for dust growth in protoplanetary disks with simple recipes to account for erosion effects. Methods: To study the erosion of dust aggregates we employed a molecular dynamics approach that features a detailed micro-physical model of the interaction of spherical grains. For the first time, the model has been extended by introducing a new visco-elastic …
Coagulation of dust aggregates plays an important role in the formation of planets and is of key importance to the evolution of protoplanetary disks (PPDs). Characteristics of dust, such as the diversity of particle size, porosity, charge, and the manner in which dust couples to turbulent gas, affect the collision outcome and the rate of dust growth. Here we present a numerical model of the evolution of the dust population within a PPD which incorporates all of these effects. The probability that any two particles collide depends on the particle charge, cross-sectional area and their relative …
By performing $N$-body simulations, we investigated fundamental processes of collisions between dust aggregates composed of submicron-sized icy dust monomers. We examined the mass distribution of fragments in the collisional outcomes in a wide range of the mass ratio and the collision velocity between colliding dust aggregates. We derived analytic expressions of the mass distribution of large remnants and small fragments by numerical fitting to the simulation results. Our analytic formulae for masses of the large remnants can reproduce the contribution of mass transfer from a large target to a…
A highly favoured mechanism of planetesimal formation is collisional growth. Single dust grains, which follow gas flows in the protoplanetary disc, hit each other, stick due to van der Waals forces and form fluffy aggregates up to centimetre size. The mechanism of further growth is unclear since the outcome of aggregate collisions in the relevant velocity and size regime cannot be investigated in the laboratory under protoplanetary disc conditions. Realistic statistics of the result of dust aggregate collisions beyond decimetre size is missing for a deeper understanding of planetary growth. Jo…
To reveal the formation of planetesimals it is of great importance to understand the collision behavior of the dusty and icy aggregates they have formed from. We present an experimental setup to investigate the aggregation properties in low-velocity collisions of dust aggregates, solid ices and icy aggregates under microgravity conditions. Results from ESA's 45th Parabolic Flight Campaign show that most collisions in the velocity range 0.1 m/s < v_c < 0.5m/s are dominated by a rebound behavior of the projectile dust aggregates and only ~ 5% of the translational kinetic energy is conserved afte…
The sticking of micron sized dust particles due to surface forces in circumstellar disks is the first stage in the production of asteroids and planets. The key ingredients that drive this process are the relative velocity between the dust particles in this environment and the complex physics of dust aggregate collisions. Here we present the results of a collision model, which is based on laboratory experiments of these aggregates. We investigate the maximum aggregate size and mass that can be reached by coagulation in protoplanetary disks. We model the growth of dust aggregates at 1 AU at the …
Cometary dust particles are remnants of the primordial accretion of refractory material that occurred during the initial stages of the Solar System formation. Understanding their physical structure can help constrain their accretion process. We have developed a simple numerical simulation of aggregate impact flattening to interpret the properties of particles collected by COSIMA. The aspect ratios of flattened particles from both simulations and observations are compared to differentiate between initial families of aggregates characterized by different fractal dimensions $D_f$. This dimension …
Incremental particle growth in turbulent protoplanetary nebulae is limited by a combination of barriers that can slow or stall growth. Moreover, particles that grow massive enough to decouple from the gas are subject to inward radial drift which could lead to the depletion of most disk solids before planetesimals can form. Compact particle growth is probably not realistic. Rather, it is more likely that grains grow as fractal aggregates which may overcome this so-called radial drift barrier because they remain more coupled to the gas than compact particles of equal mass. We model fractal aggre…
During the first stages of planet formation, the collision growth of dust aggregates in protoplanetary discs (PPDs) is interrupted at the bouncing barrier. Dust aggregates coated by different species of ice turn out to be helpful to shift the bouncing barrier towards larger sizes due to their enhanced sticking properties in some cases. A rarely noticed fact is that H$_2$O- and H$_2$O-CH$_3$OH-NH$_3$-ice behave liquid-like when UV-irradiated within a PPD-similar environment. Dust aggregates coated by these ice species might be damped in collisions due to the liquid-like ice-shell which would ef…
We study scattered light properties of protoplanetary discs at near-infrared wavelengths for various dust size and structure by performing radiative transfer simulations. We show that different dust structures might be probed by measuring disk polarisation fraction as long as the dust radius is larger than the wavelength. When the radius is larger than the wavelength, disc scattered light will be highly polarised for highly porous dust aggregates, whereas more compact dust structure tends to show low polarisation fraction. Next, roles of monomer radius and fractal dimension for scattered light…
The growth of planetesimals is an essential step in planet formation. Decimetre-size dust agglomerates mark a transition point in this growth process. In laboratory experiments we simulated the formation, evolution, and properties of decimetre-scale dusty bodies in protoplanetary discs. Small sub-mm size dust aggregates consisting of micron-size SiO$_2$ particles randomly interacted with dust targets of varying initial conditions in a continuous sequence of independent collisions. Impact velocities were 7.7 m/s on average and in the range expected for collisions with decimetre bodies in protop…
We study the light scattering properties of moderately large dust aggregates ($0.8μm \lesssim R \lesssim 2.0μm$) with a wide variation of porosity ($\mathcal{P}$) from 0.57 to 0.98. The computations are performed using the Superposition T-matrix code with BAM2 cluster ($\mathcal{P} \sim 0.57-0.64$), BAM1 cluster ($\mathcal{P} \sim 0.74$), BA or BPCA cluster ($\mathcal{P} \sim 0.85-0.87$) and BCCA cluster ($\mathcal{P} \sim 0.98$). The effect of aggregate size parameter ($X$) on the light scattering properties of aggregates (BA and BAM2) having different porosities is explored in this study. We…
Study of cosmic dust and planetary aerosols indicate that some of them contain a large number of aggregates of the size that significantly exceeds the wavelengths of the visible light. In some cases such large aggregates may dominate in formation of the light scattering characteristics of the dust. In this paper we present the results of computer modelling of light scattering by aggregates that contain more than 1000 monomers of submicron size and study how their light scattering characteristics, specifically polarization, change with phase angle and wavelength. Such a modeling became possible…
Dynamic characterization of mechanical properties of dust aggregates has been one of the most important problems to quantitatively discuss the dust growth in protoplanetary disks. We experimentally investigate the dynamic properties of dust aggregates by low-speed ($\lesssim 3.2$ m s$^{-1}$) impacts of solid projectiles. Spherical impactors made of glass, steel, or lead are dropped onto a dust aggregate of packing fraction $ϕ=0.35$ under vacuum conditions. The impact results in cratering or fragmentation of the dust aggregate, depending on the impact energy. The crater shape can be approximate…
After 25 years of laboratory research on protoplanetary dust agglomeration, a consistent picture of the various processes that involve colliding dust aggregates has emerged. Besides sticking, bouncing and fragmentation, other effects, like, e.g., erosion or mass transfer, have now been extensively studied. Coagulation simulations consistently show that $\rm μ$m-sized dust grains can grow to mm- to cm-sized aggregates before they encounter the bouncing barrier, whereas sub-$\rm μ$m-sized water-ice particles can directly grow to planetesimal sizes. For siliceous materials, other processes have t…
In this work, we study the light scattering properties of dust aggregates ($0.7μm \lesssim R_c \lesssim 2.0μm$) having a wide range of porosity ($\mathcal{P}$ = 0.59 to 0.98). The simulations are executed using the Superposition T-matrix code with BCCA, BA, BAM1 and BAM2 clusters of varying porosity. We investigate the nature and dependencies of the different scattering parameters on porosity, size and composition of the aggregated particles for wavelengths 0.45 $μ$m and 0.65 $μ$m. We find that the scattering parameters are strongly correlated with the porosity of the aggregated structures. Ou…
Understanding the heat transfer mechanism within dust aggregates is of great importance for many subjects in planetary science. We calculated the coordination number and the thermal conductivity through the solid network of compressed dust aggregates. We found a simple relationship between the coordination number and the filling factor and revealed that the thermal conductivity through the solid network of aggregates is represented by a power-law function of the filling factor and the coordination number.
We use the gravitational instability formation scenario of cometesimals to derive the aggregate size that can be released by the gas pressure from the nucleus of comet 67P/Churyumov-Gerasimenko for different heliocentric distances and different volatile ices. To derive the ejected aggregate sizes, we developed a model based on the assumption that the entire heat absorbed by the surface is consumed by the sublimation process of one volatile species. The calculations were performed for the three most prominent volatile materials in comets, namely, H_20 ice, CO_2 ice, and CO ice. We find that the…
Understanding the physical properties of dust aggregates is of great importance in planetary science. In this study, we revisited the sticking property of submillimetre-sized aggregates. We revealed that the "effective surface energy" model used in previous studies underestimates the critical pulling force needed to separate two sticking aggregates. We also derived a new and simple model of the critical pulling force based on the canonical theory of two contacting spheres. Our findings indicate that we do not need to consider the "effective surface energy" of dust aggregates when discussing th…
The formation of planetesimals in the early Solar System is hardly understood, and in particular the growth of dust aggregates above millimeter sizes has recently turned out to be a difficult task in our understanding [Zsom et al. 2010, A&A, 513, A57]. Laboratory experiments have shown that dust aggregates of these sizes stick to one another only at unreasonably low velocities. However, in the protoplanetary disk, millimeter-sized particles are known to have been ubiquitous. One can find relics of them in the form of solid chondrules as the main constituent of chondrites. Most of these chondru…
