The basis generation in reduced order modeling usually requires multiple high-fidelity large-scale simulations that could take a huge computational cost. In order to accelerate these numerical simulations, we introduce a FOM/ROM hybrid approach in this paper. It is developed based on an a posteriori error estimation for the output approximation of the dynamical system. By controlling the estimated error, the method dynamically switches between the full-order model and the reduced-oder model generated on the fly. Therefore, it reduces the computational cost of a high-fidelity simulation while achieving a prescribed accuracy level. Numerical tests on the non-parametric and parametric PDEs illustrate the efficacy of the proposed approach.
We investigate both theoretically and numerically the consistency between the nonlinear discretization in full order models (FOMs) and reduced order models (ROMs) for incompressible flows. To this end, we consider two cases: (i) FOM-ROM consistency, i.e., when we use the same nonlinearity discretization in the FOM and ROM; and (ii) FOM-ROM inconsistency, i.e., when we use different nonlinearity discretizations in the FOM and ROM. Analytically, we prove that while the FOM-ROM consistency yields optimal error bounds, FOM-ROM inconsistency yields additional terms dependent on the FOM divergence e…
We consider machine-learning of time-dependent quantities of interest derived from solution trajectories of parabolic partial differential equations. For large-scale or long-time integration scenarios, where using a full order model (FOM) to generate sufficient training data is computationally prohibitive, we propose an adaptive hierarchy of intermediate Reduced Basis reduced order models (ROM) to augment the FOM training data by certified ROM training data required to fit a kernel model.
Uncertainty quantification (UQ) tasks, such as sensitivity analysis and parameter estimation, entail a huge computational complexity when dealing with input-output maps involving the solution of nonlinear differential problems, because of the need to query expensive numerical solvers repeatedly. Projection-based reduced order models (ROMs), such as the Galerkin-reduced basis (RB) method, have been extensively developed in the last decades to overcome the computational complexity of high fidelity full order models (FOMs), providing remarkable speedups when addressing UQ tasks related with param…
Projection-based model order reduction allows for the parsimonious representation of full order models (FOMs), typically obtained through the discretization of certain partial differential equations (PDEs) using conventional techniques where the discretization may contain a very large number of degrees of freedom. As a result of this more compact representation, the resulting projection-based reduced order models (ROMs) can achieve considerable computational speedups, which are especially useful in real-time or multi-query analyses. One known deficiency of projection-based ROMs is that they ca…
Computationally efficient, structure-preserving reduced-order methods are developed for the Korteweg de Vries (KdV) equations in Hamiltonian form. The KdV equation is discretized in space by finite differences. The resulting skew-gradient system of ordinary differential equations (ODEs) is integrated with the linearly implicit Kahan's method, which preserves the Hamiltonian approximately. We have shown, using proper orthogonal decomposition (POD), the Hamiltonian structure of the full-order model (FOM) is preserved by the reduced-order model (ROM). The quadratic nonlinear terms of the KdV equa…
This paper introduces a methodology for improving the accuracy and efficiency of reduced order models (ROMs) constructed using the least-squares Petrov-Galerkin (LSPG) projection method through the introduction of preconditioning. Unlike prior related work, which focuses on preconditioning the linear systems arising within the ROM numerical solution procedure to improve linear solver performance, our approach leverages a preconditioning matrix directly within the LSPG minimization problem. Applying preconditioning in this way can improve ROM accuracy for several reasons. First, preconditioning…
We propose a machine learning-based method to build a system of differential equations that approximates the dynamics of 3D electromechanical models for the human heart, accounting for the dependence on a set of parameters. Specifically, our method permits to create a reduced-order model (ROM), written as a system of Ordinary Differential Equations (ODEs) wherein the forcing term, given by the right-hand side, consists of an Artificial Neural Network (ANN), that possibly depends on a set of parameters associated with the electromechanical model to be surrogated. This method is non-intrusive, a…
Many Hamiltonian systems can be recast in multi-symplectic form. We develop a reduced-order model (ROM) for multi-symplectic Hamiltonian partial differential equations (PDEs) that preserves the global energy. The full-order solutions are obtained by finite difference discretization in space and the global energy preserving average vector field (AVF) method. The ROM is constructed in the same way as the full-order model (FOM) applying proper orthogonal decomposition (POD) with the Galerkin projection. The reduced-order system has the same structure as the FOM, and preserves the discrete reduced…
This study concerns the development of a data-based compact model for the prediction of the fluid temperature evolution in district heating (DH) pipeline networks. This so-called "reduced-order model" (ROM) is obtained from reduction of the conservation law for energy for each pipe segment to a semi-analytical input-output relation between the pipe outlet temperature and the pipe inlet and ground temperatures that can be identified from training data. The ROM basically is valid for generic pipe configurations involving 3D unsteady heat transfer and 3D steady flow as long as heat-transfer mecha…
Model order reduction (MOR) methods that are designed to preserve structural features of a given full order model (FOM) often suffer from a lower accuracy when compared to their non-structure-preserving counterparts. In this paper, we present a framework for structure-preserving MOR, which allows to compute structured reduced order models (ROMs) with a much higher accuracy. The framework is based on parameter optimization, i.e., the elements of the system matrices of the ROM are iteratively varied to minimize an objective functional that measures the difference between the FOM and the ROM. The…
To speed-up the solution to parametrized differential problems, reduced order models (ROMs) have been developed over the years, including projection-based ROMs such as the reduced-basis (RB) method, deep learning-based ROMs, as well as surrogate models obtained via a machine learning approach. Thanks to its physics-based structure, ensured by the use of a Galerkin projection of the full order model (FOM) onto a linear low-dimensional subspace, RB methods yield approximations that fulfill the physical problem at hand. However, to make the assembling of a ROM independent of the FOM dimension, in…
We present a new surrogate modeling technique for efficient approximation of input-output maps governed by parametrized PDEs. The model is hierarchical as it is built on a full order model (FOM), reduced order model (ROM) and machine-learning (ML) model chain. The model is adaptive in the sense that the ROM and ML model are adapted on-the-fly during a sequence of parametric requests to the model. To allow for a certification of the model hierarchy, as well as to control the adaptation process, we employ rigorous a posteriori error estimates for the ROM and ML models. In particular, we provide …
Traditional reduced order modeling techniques such as the reduced basis (RB) method (relying, e.g., on proper orthogonal decomposition (POD)) suffer from severe limitations when dealing with nonlinear time-dependent parametrized PDEs, because of the fundamental assumption of linear superimposition of modes they are based on. For this reason, in the case of problems featuring coherent structures that propagate over time such as transport, wave, or convection-dominated phenomena, the RB method usually yields inefficient reduced order models (ROMs) if one aims at obtaining reduced order approxima…
Accelerating structural optimization via EIFEM: a ROM-based preconditioner
Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE)（工程数值方法国际中心）；Institute of Mathematics, École polytechnique fédérale de Lausanne（洛桑联邦理工学院数学研究所）
In this paper, a non-intrusive reduced-order model (ROM) for parametric reactor kinetics simulations is presented. Time-dependent ROMs are notoriously data intensive and difficult to implement when nonlinear multiphysics phenomena are considered. These challenges are exacerbated when parametric dependencies are included. The proper orthogonal decomposition mode coefficient interpolation (POD-MCI) ROM presented in this work can be constructed directly from lower-dimensional quantities of interest (QoIs) and is independent of the underlying model. This greatly alleviates the data requirement of …
University of California, Berkeley（加州大学伯克利分校）；Lawrence Livermore National Laboratory（劳伦斯利弗莫尔国家实验室）
Traditional linear subspace reduced order models (LS-ROMs) are able to accelerate physical simulations, in which the intrinsic solution space falls into a subspace with a small dimension, i.e., the solution space has a small Kolmogorov n-width. However, for physical phenomena not of this type, such as advection-dominated flow phenomena, a low-dimensional linear subspace poorly approximates the solution. To address cases such as these, we have developed an efficient nonlinear manifold ROM (NM-ROM), which can better approximate high-fidelity model solutions with a smaller latent space dimension …
Stochastic reduced-order modeling based on time-dependent bases (TDBs) has proven successful for extracting and exploiting low-dimensional manifold from stochastic partial differential equations (SPDEs). The nominal computational cost of solving a rank-$r$ reduced-order model (ROM) based on time-dependent basis, a.k.a. TDB-ROM, is roughly equal to that of solving the full-order model for $r$ random samples. As of now, this nominal performance can only be achieved for linear or quadratic SPDEs -- at the expense of a highly intrusive process. On the other hand, for problems with non-polynomial n…
Reducing the computational time required by high-fidelity, full order models (FOMs) for the solution of problems in cardiac mechanics is crucial to allow the translation of patient-specific simulations into clinical practice. While FOMs, such as those based on the finite element method, provide valuable information of the cardiac mechanical function, up to hundreds of thousands degrees of freedom may be needed to obtain accurate numerical results. As a matter of fact, simulating even just a few heartbeats can require hours to days of CPU time even on powerful supercomputers. In addition, cardi…
Energy stable model order reduction for the Allen-Cahn equation
University of Turkish Aeronautical Association（土耳其航空协会大学）；Institute of Applied Mathematics, Middle East Technical University（中东理工大学应用数学研究所）；Department of Mathematics, Middle East Technical University（中东理工大学数学系）
In this work, we present a reduced-order model for a nonlinear cross-diffusion problem from population dynamics, for the Shigesada-Kawasaki-Teramoto (SKT) equation with Lotka-Volterra kinetics. The finite-difference discretization of the SKT equation in space results in a system of linear--quadratic ordinary differential equations (ODEs). The reduced order model (ROM) has the same linear-quadratic structure as the full order model (FOM). Using the linear-quadratic structure of the ROM, the reduced-order solutions are computed independent of the full solutions with the proper orthogonal decompo…
