We analyse the local discontinuous Galerkin (LDG) method for two-dimensional singularly perturbed reaction-diffusion problems. A class of layer-adapted meshes, including Shishkin- and Bakhvalov-type meshes, is discussed within a general framework. Local projections and their approximation properties on anisotropic meshes are used to derive error estimates for energy and "balanced" norms. Here, the energy norm is naturally derived from the bilinear form of LDG formulation and the "balanced" norm is artifically introduced to capture the boundary layer contribution. We establish a uniform convergence of order $k$ for the LDG method using the balanced norm with the local weighted $L^2$ projection as well as an optimal convergence of order $k+1$ for the energy norm using the local Gauss-Radau projections. Numerical experiments are presented.
The parameter-uniform convergence of a fitted operator method for a singularly perturbed differential equation is normally available only for uniform meshes. Here we establish the parameter-uniform convergence of a fitted operator method on a non-uniform mesh for a singularly perturbed initial value problem. This is obtained by a new method of proof.
We present the analysis for an $hp$ weak Galerkin-FEM for singularly perturbed reaction-convection-diffusion problems in one-dimension. Under the analyticity of the data assumption, we establish robust exponential convergence, when the error is measured in the energy norm, as the degree $p$ of the approximating polynomials is increased. The Spectral Boundary Layer mesh is used, which is the minimal (layer adapted) mesh for such problems. Numerical examples illustrating the theory are also presented.
The local discontinuous Galerkin (LDG) method is studied for a third-order singularly perturbed problem of the convection-diffusion type. Based on a regularity assumption for the exact solution, we prove almost $O(N^{-(k+1/2)})$ (up to a logarithmic factor) energy-norm convergence uniformly in the perturbation parameter. Here, $k\geq 0$ is the maximum degree of piecewise polynomials used in discrete space, and $N$ is the number of mesh elements. The results are valid for the three types of layer-adapted meshes: Shishkin-type, Bakhvalov-Shishkin type, and Bakhvalov-type. Numerical experiments a…
In this paper, we develop two fully nonconforming (both H(grad curl)-nonconforming and H(curl)-nonconforming) finite elements on cubical meshes which can fit into the Stokes complex. The newly proposed elements have 24 and 36 degrees of freedom, respectively. Different from the fully H(grad curl)-nonconforming tetrahedral finite elements in [9], the elements in this paper lead to a robust finite element method to solve the singularly perturbed quad-curl problem. To confirm this, we prove the optimal convergence of order $O(h)$ for a fixed parameter $ε$ and the uniform convergence of order $O(h…
In the recent article [Kopteva, N., Numer. Math., 137, 607--642 (2017)] the author obtained residual-type a posteriori error estimates in the energy norm for singularly perturbed semilinear reaction-diffusion equations on anisotropic triangulations. The error constants in these estimates are independent of the diameters and the aspect ratios of mesh elements and of the small perturbation parameter. The purpose of this note is to improve the weights in the jump residual part of the estimator. This is attained by using a novel sharper version of the scaled trace theorem for anisotropic elements,…
Robust recovery-type a posteriori error estimators for streamline upwind/Petrov Galerkin discretizations for singularly perturbed problems
Chongqing Jiaotong University（重庆交通大学）；Texas A&M International University（德州农工国际大学）；Beijing Computational Science Research Center（北京计算科学研究中心）；Wayne State University（韦恩州立大学）
In this paper we analyze the error as well for the semi-discretization as the full discretization of a time-dependent convection-diffusion problem. We use for the discretization in space the local discontinuous Galerkin (LDG) method on a class of layer-adapted meshes including Shishkin-type and Bakhvalov-type meshes and the implicit $θ$-scheme in time. For piecewise tensor-product polynomials of degree $k$ we obtain uniform or almost uniform error estimates with respect to space of order $k+1/2$ in some energy norm and optimal error estimates with respect to time. Our analysis is based on care…
A singularly perturbed convection-diffusion problem,posed on the unit square in $\mathbb{R}^2$, is studied; its solution has both exponential and characteristic boundary layers. The problem is solved numerically using the local discontinuous Galerkin (LDG) method on Shishkin meshes. Using tensor-product piecewise polynomials of degree at most $k>0$ in each variable, the error between the LDG solution and the true solution is proved to converge, uniformly in the singular perturbation parameter, at a rate of $O((N^{-1}\ln N)^{k+1/2})$ in an associated energy norm, where $N$ is the number of mesh…
A singularly perturbed convection-diffusion problem posed on the unit square in $\mathbb{R}^2$, whose solution has exponential boundary layers, is solved numerically using the local discontinuous Galerkin (LDG) method with piecewise polynomials of degree at most $k>0$ on three families of layer-adapted meshes: Shishkin-type, Bakhvalov-Shishkin-type and Bakhvalov-type.On Shishkin-type meshes this method is known to be no greater than $O(N^{-(k+1/2)})$ accurate in the energy norm induced by the bilinear form of the weak formulation, where $N$ mesh intervals are used in each coordinate direction.…
Discontinuous Galerkin (DG) methods are extensions of the usual Galerkin finite element methods. Although there are vast amount of studies on DG methods, most of them have assumed shape-regularity conditions on meshes for both theoretical error analysis and practical computations. In this paper, we present a new symmetric interior penalty DG scheme with a modified penalty term. We show that, without imposing the shape-regularity condition on the meshes, the new DG scheme inherits all of the good properties of standard DG methods, and is thus robust on anisotropic meshes. Numerical experiments …
We present a geometric multigrid solver for the Compact Discontinuous Galerkin method through building a hierarchy of coarser meshes using a simple agglomeration method which handles arbitrary element shapes and dimensions. The method is easily extendable to other discontinuous Galerkin discretizations, including the Local DG method and the Interior Penalty method. We demonstrate excellent solver performance for Poisson's equation, provided a flux formulation is used for the operator coarsening and a suitable switch function chosen for the numerical fluxes.
We consider a singularly perturbed reaction diffusion problem as a first order two-by-two system. Using piecewise discontinuous polynomials for the first component and $H_{div}$-conforming elements for the second component we provide a convergence analysis on layer adapted meshes and an optimal convergence order in a balanced norm that is comparable with a balanced $H^2$-norm for the second order formulation.
In this paper we present an immersed weak Galerkin method for solving second-order elliptic interface problems on polygonal meshes, where the meshes do not need to be aligned with the interface. The discrete space consists of constants on each edge and broken linear polynomials satisfying the interface conditions in each element. For triangular meshes, such broken linear plynomials coincide with the basis functions in immersed finite element methods [26]. We establish some approximation properties of the broken linear polynomials and the discrete weak gradient of a certain projection of the so…
A stabilizing/penalty term is often used in finite element methods with discontinuous approximations to enforce connection of discontinuous functions across element boundaries. Removing stabilizers from discontinuous finite element methods will simplify the formulations and reduce programming complexity significantly. The goal of this paper is to introduce a stabilizer free weak Galerkin finite element method for second order elliptic equations on polytopal meshes in 2D or 3D. This new WG method keeps a simple symmetric positive definite form and can work on polygonal/polyheral meshes. Optimal…
In this article, using the weighted discrete least-squares, we propose a patch reconstruction finite element space with only one degree of freedom per element. As the approximation space, it is applied to the discontinuous Galerkin methods with the upwind scheme for the steady-state convection-diffusion-reaction problems over polytopic meshes. The optimal error estimates are provided in both diffusion-dominated and convection-dominated regimes. Furthermore, several numerical experiments are presented to verify the theoretical error estimates, and to well approximate boundary layers and/or inte…
Motivated by a wide range of real-world problems whose solutions exhibit boundary and interior layers, the numerical analysis of discretizations of singularly perturbed differential equations is an established sub-discipline within the study of the numerical approximation of solutions to differential equations. Consequently, much is known about how to accurately and stably discretize such equations on \textit{a priori} adapted meshes, in order to properly resolve the layer structure present in their continuum solutions. However, despite being a key step in the numerical simulation process, muc…
We present robust and highly parallel multilevel non-overlapping Schwarz preconditioners, to solve an interior penalty discontinuous Galerkin finite element discretization of a system of steady state, singularly perturbed reaction-diffusion equations with a singular reaction operator, using a GMRES solver. We provide proofs of convergence for the two-level setting and the multigrid V-cycle as well as numerical results for a wide range of regimes.
We consider a singularly perturbed convection-diffusion problem that has in addition a shift term. We show a solution decomposition using asymptotic expansions and a stability result. Based upon this we provide a numerical analysis of high order finite element method on layer adapted meshes. We also apply a new idea of using a coarser mesh in places where weak layers appear. Numerical experiments confirm our theoretical results.
In this paper, we generalize the compact subcell weighted essentially non oscillatory (CSWENO) limiting strategy for Runge-Kutta discontinuous Galerkin method developed recently by us in 2021 for structured meshes to unstructured triangular meshes. The main idea of the limiting strategy is to divide the immediate neighbors of a given cell into the required stencil and to use a WENO reconstruction for limiting. This strategy can be applied for any type of WENO reconstruction. We have used the WENO reconstruction proposed by Zhu and Shu in 2019 and provided accuracy tests and results for two-dim…
We consider spectral mixed discontinuous Galerkin finite element discretizations of the Lamé system of linear elasticity in polyhedral domains in $\mathbb{R}^3$. In order to resolve possible corner, edge, and corner-edge singularities, anisotropic geometric edge meshes consisting of hexahedral elements are applied. We perform a computational study on the discrete inf-sup stability of these methods, and especially focus on the robustness with respect to the Poisson ratio close to the incompressible limit (i.e. the Stokes system). Furthermore, under certain realistic assumptions (for analytic da…
This paper presents high order accurate discontinuous Galerkin (DG) methods for wave problems on moving curved meshes with general choices of basis and quadrature. The proposed method adopts an arbitrary Lagrangian-Eulerian (ALE) formulation to map the acoustic wave equation from the time-dependent moving physical domain onto a fixed reference domain. For moving curved meshes, weighted mass matrices must be assembled and inverted at each time step when using explicit time stepping methods. We avoid this step by utilizing an easily invertible weight-adjusted approximation. The resulting semi-di…
$hp$-Version robust interior penalty discontinuous Galerkin methods for the $p$-Laplacian on simplicial and on essentially arbitrarily-shaped element meshes
The Maxwell Institute for Mathematical Sciences & Department of Mathematics, Heriot-Watt University（赫瑞-瓦特大学）；Department of Mathematics, School of Mathematical and Physical Sciences, National Technical University of Athens（雅典国立技术大学）；IACM, FORTH（FORTH）；Institute of Analysis and Scientific Computing, Vienna University of Technology（维也纳工业大学）；Faculty of Mathematics, University of Vienna（维也纳大学）
本文研究了$ p $-拉普拉斯方程的$ hp $-版本不连续伽辽金方法，证明了新的迹型逆估计，确保了方法的无条件稳定性，并建立了先验范数误差估计。
A new discontinuous Galerkin finite element method for the Stokes equations is developed in the primary velocity-pressure formulation. This method employs discontinuous polynomials for both velocity and pressure on general polygonal/polyhedral meshes. Most finite element methods with discontinuous approximation have one or more stabilizing terms for velocity and for pressure to guarantee stability and convergence. This new finite element method has the standard conforming finite element formulation, without any velocity or pressure stabilizers. Optimal-order error estimates are established for…
A new stabilizer free weak Galerkin (WG) method is introduced and analyzed for the biharmonic equation. Stabilizing/penalty terms are often necessary in the finite element formulations with discontinuous approximations to ensure the stability of the methods. Removal of stabilizers will simplify finite element formulations and reduce programming complexity. This stabilizer free WG method has an ultra simple formulation and can work on general partitions with polygons/polyhedra. Optimal order error estimates in a discrete $H^2$ for $k\ge 2$ and in $L^2$ norm for $k>2$ are established for the cor…
Discontinuous Galerkin (dG) methods on meshes consisting of polygonal/polyhedral (henceforth, collectively termed as \emph{polytopic}) elements have received considerable attention in recent years. Due to the physical frame basis functions used typically and the quadrature challenges involved, the matrix-assembly step for these methods is often computationally cumbersome. To address this important practical issue, this work proposes two parallel assembly implementation algorithms on CUDA-enabled graphics cards for the interior penalty dG method on polytopic meshes for various classes of linear…
Pointwise accurate numerical methods are constructed and analysed for three classes of singularly perturbed first order transport problems. The methods involve piecewise-uniform Shishkin meshes and the numerical approximations are shown to be parameter-uniformly convergent in the maximum norm. A transport problem from the modelling of fluid-particle interaction is formulated and used as a test problem for these numerical methods. Numerical results are presented to illustrate the performance of the numerical methods and to confirm the theoretical error bounds established in the paper.
