The investigation of the defect chemistry of solid oxides is of central importance for the understanding of redox processes. This can be performed by measuring conductivity as a function of the oxygen partial pressure, which is conventionally established by using buffer gas mixtures or oxygen pumps based on zirconia. However, this approach has some limitations, such as difficulty regulating oxygen partial pressure in some intermediate-pressure regions or the possibility of influencing the redox process by gases that can also be incorporated into the oxide or react with the surface via heterogeneous catalysis. Herein, we present an alternative physical method in which the oxygen partial pressure is controlled by dosing pure oxygen inside an ultra-high vacuum chamber. To monitor the conductivity of the oxide under investigation, we employ a dedicated four-probe measurement system that relies on the application of a very small AC voltage, in combination with lock-in data acquisition using highly sensitive electrometers, minimizing the electrochemical polarization or electro-reduction and degradation effects. By analyzing the model material SrTiO3, we demonstrate that its characteristic redox behavior can be reproduced in good agreement with the theory when performing simultaneous electrical conductivity relaxation (ECR) and high-temperature equilibrium conductivity (HTEC) measurements. We show that the use of pure oxygen allows for a direct analysis of the characteristic oxygen dose, which opens up various perspectives for a detailed analysis of the surface chemistry of redox processes.
Stability of oxygen point defects in Ruddlesden-Popper oxides (La$_{1-x}$Sr$_{x}$)$_{2}$MO$_{4{\pm}δ}$ (M = Co, Ni, Cu) is studied with density functional theory calculations to determine their stable sites, charge states, and energetics as functions of Sr content ($x$), transition metal (M) and defect concentration (δ). We demonstrate that the dominant O point defects can change between oxide interstitials, peroxide interstitials, and vacancies. Generally, increasing $x$ and atomic number of M stabilizes peroxide over oxide interstitials, as well as vacancies over both peroxide and oxide inte…
The oxygen evolution reaction (OER) plays an important role in evaluating a photocatalyst and to understand its surface chemistry. In this work we present a comparative study of the OER on the oxide NaTaO$_3$ (113) surface and the oxynitride SrTaO$_2$N (001) surface. Oxynitrides are highly promising photocatalysts due to their smaller band gap and resulting better visible light absorption compared to oxides but our knowledge about their surface structure and chemistry is still very limited. With the goal to compare the surface chemistry of oxides and oxynitrides, we perform density functional …
Graphene oxide is a rising star among 2D materials, yet its interaction with liquid water remains a fundamentally open question: experimental characterization at the atomic scale is difficult, and modelling by classical approaches cannot properly describe chemical reactivity. Here, we bridge the gap between simple computational models and complex experimental systems, by realistic first-principles molecular simulations of graphene oxide (GO) in liquid water. We construct chemically accurate GO models and study their behavior in water, showing that oxygen-bearing functional groups (hydroxyl and…
Variety of conducting heterointerfaces have been made between SrTiO3 substrates and thin capping layers of distinctly different oxide materials that can be classified into polar band insulators (e.g. LaAlO3), polar Mott insulators (e.g. LaTiO3), apparently non-polar band insulators (e.g. γ-Al2O3), and amorphous oxides (e.g. amorphous SrTiO3). A fundamental question to ask is if there is a common mechanism that governs interfacial conductivity in all these heterointerfaces. Here, we examined the conductivity of different kinds of heterointerfaces by annealing in oxygen and surface treatment wit…
Layered d-metal pnictide oxides are a unique class of compounds which consists of characteristic d-metal pnictide layers and metal oxide layers. More than 100 of these layered compounds, including the recently discovered Fe-based superconducting pnictide oxides, can be classified into 9 structure types. These structure types and the chemical and physical properties of the characteristic d-metal pnictide layers and metal oxide layers of the layered d-metal pnictide oxides are reviewed and discussed. Furthermore, possible approaches to design new superconductors based on these layered d-metal pn…
The deposition of a thin oxide layer at metal/semiconductor interfaces has been previously reported as a means of reducing contact resistance in 2D electronics. Using X-ray photoelectron spectroscopy with in-situ Ti deposition, we fabricate Au/Ti/TiOx/MoS2 samples as well as Au/Ti/MoS2 and Au/TiOx/MoS2 for comparison. Elemental titanium reacts strongly with MoS2 whereas no interface reactions are observed in the two types of samples containing TiOx/MoS2 interfaces. Using time domain thermoreflectance for the measurement of thermal boundary conductance, we find that samples contacted with Ti an…
The amorphous phases of antimony oxide at three different oxidation levels have been investigated by {\it ab initio} molecular-dynamics calculations using a simulated `melt-quench' approach. The atomic and electronic structure of the amorphous phases are analyzed and compared to their crystalline counterparts. The amorphous structure of the trioxide ({\it a\,}--Sb$_2$O$_3$) resembles the $β$-phase of the crystalline form (valentinite), in agreement with previous observations. In the relaxed athermal structure, however, more senarmontite-like structural features are apparent. The phase diagram …
Memory devices based on resistive switching (RS) have not been fully realised due to lack of understanding of the underlying switching mechanisms. Nature of ion transport responsible for switching and growth of conducting filament in transition metal oxide based RS devices is still in debate. Here, we investigated the mechanism in Niobium oxide based RS devices, which shows unipolar switching with high ON/OFF ratio, good endurance cycles and high retention times. We controlled the boundary conditions between low-conductance insulating and a high-conductance metallic state where conducting fila…
We report a comprehensive first-principles study of the thermodynamics and transport of intrinsic point defects in layered oxide cathode materials LiMO$_2$ (M=Co, Ni), using density-functional theory and the Heyd-Scuseria-Ernzerhof screened hybrid functional. We find that LiCoO$_2$ has a complex defect chemistry; different electronic and ionic defects can exist under different synthesis conditions, and LiCoO$_2$ samples free of cobalt antisite defects can be made under Li-excess (Co-deficient) environments. A defect model for lithium over-stoichiometric LiCoO$_2$ is also proposed, which involv…
We study the stability of Li-O compounds as a function of pressure, with Li ion battery applications and fundamental chemical interest in mind. Using the ab initio evolutionary algorithm, we predict stability of novel compounds LiO4, Li5O3 and Li6O under pressure. LiO4, formed at the pressure of just 6 GPa, can be seen as ε-O8 accepting two electrons from two Li atoms. This phase is superconducting, with Tc up to 12.2 K at 10 GPa. This is remarkable, because elemental oxygen becomes superconducting at much higher pressure (96 GPa) and has much lower Tc (<0.6 K), and suggests that chemical allo…
The advent of nanotechnology has hurtled the discovery and development of nanostructured materials with stellar chemical and physical functionalities in a bid to address issues in energy, environment, telecommunications and healthcare. In this quest, a class of two-dimensional layered materials consisting of alkali or coinage metal atoms sandwiched between slabs exclusively made of transition metal and chalcogen (or pnictogen) atoms arranged in a honeycomb fashion have emerged as materials exhibiting fascinatingly rich crystal chemistry, high-voltage electrochemistry, fast cation diffusion bes…
The epitaxial deposition of the first oxide buffer layer (seed layer) on biaxially textured Ni tape for coated conductors is a critical step that is dependent on the atomistic surface condition of the metal. We present a study of the {100}<100> biaxially textured Ni (001) surface and seed-layer growth using in situ reflection high-energy electron diffraction (RHEED) and Auger electron spectroscopy (AES). Our observations are consistent with formation of a c(2 x 2) 2-D superstructure due to surface segregation of sulfur contained in the metal. We show that this superstructure can have a dramati…
Impact of charge transition levels on grain boundary properties in acceptor doped oxide ceramics: A phase-field study
Technische Universität Darmstadt（达姆施塔特工业大学）；IMDEA Materials（IMDEA材料研究所）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；RWTH Aachen University（亚琛工业大学）；Max Planck Institute for Solid State Research（马克斯·普朗克固体的研究研究所）；University of Stuttgart（斯图加特大学）
The type and distribution of oxygen functional groups in graphene oxide (GO) and reduced graphene oxide (RGO) remain still a subject of great debate. Local analytic techniques are required to access the chemistry of these materials at a nanometric scale. Electron energy loss spectroscopy in a scanning transmission electron microscope can provide the suitable resolution, but GO and RGO are extremely sensitive to electron irradiation. In this work we employ a dedicated experimental setup to reduce electron illumination below damage limit. GO oxygen maps obtained at a few nanometers scale show se…
The properties of single-crystal SrTiO$_{3}$ substrates and homoepitaxial SrTiO$_{3}$ films grown by pulsed laser deposition have been compared, in order to understand the loss of interfacial conductivity when more than a critical thickness of nominally homoepitaxial SrTiO$_{3}$ is inserted between a LaAlO$_{3}$ film and a SrTiO$_{3}$ substrate. In particular, the chemical composition and the structure of homoepitaxial SrTiO$_{3}$ investigated by low-energy ion-scattering and surface x-ray diffraction, show that for insulating heterointerfaces, a Sr-excess is present between the LaAlO$_{3}$ an…
Cerium oxide (ceria, CeO2) is one of the most promising mixed ionic and electronic conducting materials. Previous atomistic analysis has covered widely the effects of substitution on oxygen vacancy migration. However, an in-depth analysis of the role of cation substitution beyond trivalent cations has rarely been explored. Here, we investigate soluble monovalent, divalent, trivalent and tetravalent cation substituents. By combining classical simulations and quantum mechanical calculations, we provide an insight into defect association energies between substituent cations and oxygen vacancies a…
Transition metal oxides are considered promising thermoelectric materials for harvesting high-temperature waste heat due to their stability, abundance and low toxicity. Despite their typically strong ionic character, they can exhibit surprisingly high power factors $σS^2$, as in n-type SrTiO$_3$ for instance. Thus, it is worth examining other transition metal oxides that might surpass the performances of SrTiO$_3$. This theoretical paper investigates the thermoelectric properties of n-type rutile TiO$_2$, which is the most stable phase of titanium oxide up to 2000 K. The electronic structure i…
BaCe$_{0.25}$Mn$_{0.75}$O$_{3-δ}$ (BCM), a non-stoichiometric oxide closely resembling a perovskite crystal structure, has recently emerged as a prospective contender for application in renewable energy harvesting by solar thermochemical hydrogen generation. Using solar energy, oxygen-vacancies can be created in BCM and the reduced crystal so obtained can, in turn, produce H2 by stripping oxygen from H2O. Therefore, a first step toward understanding the working mechanism and optimizing the performance of BCM, is a thorough and comparative analysis of the electronic structure of the pristine an…
The formation of a hydroxylated native oxide layer on Si(001) under wet conditions is studied by means of first principles molecular dynamics simulations. Water molecules are found to adsorb and dissociate on the oxidised surface leading to rupture of Si-O bonds and producing reactive sites for attack by dissolved dioxygen or hydrogen peroxide molecules. Tensile strain is found to enhance the driving force for the dissociative adsorption of water, suggesting that similar reactions could be responsible for environmentally-driven sub-critical crack propagation in silicon.
Material properties depend sensitively on picometer scale atomic displacements introduced by local chemical fluctuations. Direct real-space, high spatial-resolution measurements of this compositional variation and corresponding distortion can provide new insights into materials behavior at the atomic scale. Using aberration corrected scanning transmission electron microscopy combined with advanced imaging methods, we observed atom column specific, picometer-scale displacements induced by local chemistry in a complex oxide solid solution. Displacements predicted from density functional theory w…
Although perovskite oxides hold promise in applications ranging from solid oxide fuel cells to catalysts, their surface chemistry is poorly understood at the molecular level. Here we follow the formation of the first monolayer of water at the (001) surfaces of Sr$_{n+1}$Ru$_n$O$_{3n+1}$ ($n$ = 1, 2) using low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and density functional theory. These layered perovskites cleave between neighbouring SrO planes, yielding almost ideal, rocksalt-like surfaces. An adsorbed monomer dissociates and forms a pair of hydroxide ions.…
A deep understanding of defects is essential for the optimisation of materials for solar energy conversion. This is particularly true for metal oxide photo(electro)catalysts, which typically feature high concentrations of charged point defects that are electronically active. In photovoltaic materials, except for selected dopants, defects are considered detrimental and should be eliminated to minimise charge recombination. However, photocatalysis is a more complex process where defects can play an active role, for example, by stabilising charge separation and mediating rate-limiting catalytic s…
Unveiling point defects concentration in transition metal oxide thin films is essential to understand and eventually control their functional properties, employed in an increasing number of applications and devices. Despite this unquestionable interest, there is a lack of available experimental techniques able to estimate the defect chemistry and equilibrium constants in such oxides at intermediate-to-low temperatures. In this study, the defect chemistry of a relevant material such as La1-xSrxFeO3-d (LSF) with (x = 0.2, 0.4 and 0.5 (LSF20, LSF40 and LSF50 respectively) is obtained by using a n…
Fe- and steelmaking is the largest single industrial CO2 emitter, accounting for 6.5% of all CO2 emissions on the planet. This fact challenges the current technologies to achieve carbon-lean steel production and to align with the requirement of a drastic reduction of 80% in all CO2 emissions by around 2050. Thus, alternative reduction technologies have to be implemented for extracting iron from its ores. The H-based direct reduction has been explored as a sustainable route to mitigate CO2 emissions, where the reduction kinetics of the intermediate oxide product FexO wustite into Fe is the rate…
Polar discontinuities and structural changes at oxide interfaces can give rise to a large variety of electronic and ionic phenomena. Related effects have been intensively studied in epitaxial systems, including ferroelectric domain walls and interfaces in superlattices. Here, we investigate the relation between polar discontinuities and the local chemistry at grain boundaries in polycrystalline ferroelectric ErMnO3. Using orientation mapping and different scanning probe microscopy techniques, we demonstrate that the polycrystalline material develops charged grain boundaries with enhanced elect…
By using the state-of-the-art microscopy and spectroscopy in aberration-corrected scanning transmission electron microscopes, we determine the atomic arrangements, occupancy, elemental distribution, and the electronic structures of dislocation cores in the 10°tilted SrTiO3 bicrystal. We identify that there are two different types of oxygen deficient dislocation cores, i.e., the SrO plane terminated Sr0.82Ti0.85O3-x (Ti3.67+, 0.48<x<0.91) and TiO2 plane terminated Sr0.63Ti0.90O3-y (Ti3.60+, 0.57<y<1). They have the same Burgers vector of a[100] but different atomic arrangements and chemical pro…
Oxide materials exhibit several novel structural, magnetic, and electronic properties. Their stability under ambient conditions, easy synthesis, and high transition temperatures provide such systems with an ideal ground for realizing topological properties and real-life technological applications. However, experimental evidence of topological states in oxide materials is rare. In this study, we have synthesized single crystals of oxide double perovskite Sr2FeMoO6 and revealed its topological nature by investigating its structural, magnetic, and electronic properties. We observed that the syste…
A thin oxide layer protects metals from electrochemical corrosion and hence the stability of this oxide layer is crucial for corrosion resistance of metals. The dynamics of cationic and anionic point defects which are injected into this oxide layer at the metal-oxide-layer interface and the oxide-layer-environment interface during electrochemical processes determine the stability of this oxide-layer. The point defect model originally advanced by Digby Macdonald and perfected into a correct and complete theory by Bosco Emmanuel provides a concrete basis for investigating this stability question…
The electronic and structural properties of pure and defective cerium oxide are investigated using a unified LDA+U approach which allows to treat the different valence states of Ce occurring for different stoichiometries on a same ground, without any {\it a priori} assumptions on the defect chemistry. The method correctly predicts the atomistic and electronic structures of the \4ce and \3ce bulk phases, as well as the subtle defect chemistry in reduced materials \xce, which controls the oxygen storage functionality of cerium-based oxides. The analysis of the energetics highlights the limits of…
The existence of approximately 30 noncentrosymmetric metals (NCSM) suggests a contraindication between crystal structures without inversion symmetry and metallic behavior. Those containing oxygen are especially scarce. Here we propose and demonstrate a design framework to remedy this property disparity and accelerate NCSM-oxide discovery: The primary ingredient relies on the removal of inversion symmetry through displacements of atoms whose electronic degrees of freedom are decoupled from the states at the Fermi level. Density functional theory calculations validate this crystal--chemistry str…
Investigating intrinsic silicon oxide and a lightly doped p-type layer for evolution of tail states and estimating its impact as a passivation layer in a HIT type device
GeSn alloys are metastable semiconductors that have been proposed as building blocks for silicon-integrated short-wave and mid-wave infrared photonic and sensing platforms. Exploiting these semiconductors requires, however, the control of their epitaxy and their surface chemistry to reduce non-radiative recombination that hinders the efficiency of optoelectronic devices. Herein, we demonstrate that a combined sulfur- and iodine-based treatments yields effective passivation of Ge and Ge0.9Sn0.1 surfaces. X-ray photoemission spectroscopy and in situ spectroscopic ellipsometry measurements were u…
The transition metal-oxygen bond appears prominently throughout chemistry and solid-state physics. Many materials, from biomolecules to ferroelectrics to the components of supernova remnants contain this bond in some form. Many of these materials' properties strongly depend on fine details of the TM-O bond and intricate correlation effects, which make accurate calculations of their properties very challenging. We present quantum Monte Carlo, an explicitly correlated class of methods, to improve the accuracy of electronic structure calculations over more traditional methods like density functio…
Oxygen, the third most abundant element in the universe, plays a key role in the chemistry of condensed matter and biological systems. Here, we report evidence for a hitherto unexplored Auger transition in oxides, where a valence band electron fills a vacancy in the 2s state of oxygen, transferring sufficient energy to allow electron emission. We used a beam of positrons with kinetic energies of $\sim$1 eV to create O 2s holes via matter-antimatter annihilation. This made possible the elimination of the large secondary electron background that has precluded definitive measurements of the low-e…
Understanding native point defects is fundamental in order to comprehend the properties of TiO$_2$ anatase in technological applications. Several first-principles studies have been performed in order to investigate the defect chemistry of this material. The reported values are, however, scattered over a wide range. In this manuscript we perform a comparative study employing different approaches based on semilocal, DFT+$U$ and screened hybrid functionals in order to investigate the dependence of defect properties, such as formation energies and charge transition levels, on the employed computat…
Oxide heterointerfaces are ideal for investigating strong correlation effects to electron transport, relevant for oxide-electronics. Using hot-electrons, we probe electron transport perpendicular to the La$_{0.7}$Sr$_{0.3}$MnO$_{3}$ (LSMO)- Nb-doped SrTiO$_3$ (Nb:STO) interface and find the characteristic hot-electron attenuation length in LSMO to be 1.48 $\pm$ 0.10 unit cells (u.c.) at -1.9 V, increasing to 2.02 $\pm$ 0.16 u.c. at -1.3 V at room temperature. Theoretical analysis of this energy dispersion reveals the dominance of electron-electron and polaron scattering. Direct visualization o…
The Jahn-Teller theorem constitutes one of the most popular and stringent concepts, applicable to all fields of chemistry. In open shell transition elements chemistry and physics, 3d4, 3d9, and 3d7(low-spin) configurations in octahedral complexes serve as particular illustrative and firm examples, where a striking change (distortion) in local geometry is associated to a substantial reduction of electronic energy. However, there has been a lasting debate, about the fact that the octahedra are found to exclusively elongate, (at least for eg electrons). Against this background, the title compound…
The high solubility of oxygen in Ti, Zr and Hf makes it difficult to stabilize the protective oxide scales on their surfaces as the subsurface regions can serve as boundless sinks that continuously dissolve oxygen. Alloying elements are crucial to reduce the oxygen solubility and diffusivity within early transition metals. Past studies have shown that substitutional alloying additions to titanium repel interstitial oxygen. Here we use first-principles calculations to show that this repulsion is short ranged and identify a variety of factors that are likely responsible for the repulsive interac…
Hydrogen incorporation in native surface oxides of metal alloys often controls the onset of metal hydriding, with implications for materials corrosion and hydrogen storage. A key representative example is titania, which forms as a passivating layer on a variety of titanium alloys for structural and functional applications. These oxides tend to be structurally diverse, featuring polymorphic phases, grain boundaries, and amorphous regions that generate a disparate set of unique local environments for hydrogen. Here, we introduce a workflow that can efficiently and accurately navigate this comple…
High entropy oxides are emerging as an exciting new avenue to design highly tailored functional behaviors that have no traditional counterparts. Study and application of these materials are bringing together scientists and engineers from physics, chemistry, and materials science. The diversity of each of these disciplines comes with perspectives and jargon that may be confusing to those outside of the individual fields, which can result in miscommunication of important aspects of research. In this perspective, we provide examples of research and characterization taken from these different fiel…
Colossal reversible conductivity switching by room-temperature oxygen-vacancy ordering in Aurivillius oxide films
Tsientang Institute for Advanced Study, Zhejiang（浙江大学先进技术研究总院）；Institute of Plasma Physics, HFIPS, Chinese Academy of Sciences, Hefei（中国科学院合肥物质科学研究院等离子体物理研究所）；Department of Physics and Materials, The Hong Kong Polytechnic University, Hong Kong（香港理工大学物理与材料系）；Songshan Lake Materials Laboratory, Dongguan, Guangdong（松山湖材料实验室）；Institute of Physics, Chinese Academy of Sciences, Beijing（中国科学院物理研究所）
