Thermoelectric materials based on earth-abundant and non-toxic elements are very useful in cost-effective and eco-friendly waste heat management systems. The constituents of SrGaSnH are earth-abundant and non-toxic, thus we have chosen SrSnGaH to study its structural stability and thermoelectric properties by using DFT, DFPT, and semi-classical Boltzmann transport theory. Our elastic and phonons calculations show that the compound has good structural stability. The electronic structure calculation discloses that it is an indirect bandgap (0.63 eV by mBJ+SOC) semiconductor. Light band hole effective mass leads to higher electrical conductivity along x-axis than that of along z-axis. On the other side, the weak phonon scattering leads to high lattice thermal conductivity ~10.5 W m-1K-1 at 300 K. Although the power factor (PF) is very high along the x-axis (above 10 mW m-1K-2 at 300 K), such large kl dramatically reduces ZT. The maximum values of in-plane and cross-plane ZT are ~1 (n-type), 0.8 (p-type) and 0.6 (n-type), (0.2 p-type) at 700 K, respectively. The present study has revealed that this compound has strong potential in eco-friendly TE applications.
Structural heterogeneity-induced enhancement of transverse magneto-thermoelectric conversion revealed by thermoelectric imaging in functionally graded materials
National Institute for Materials Science（国立材料研究所）；National Institute of Advanced Industrial Science and Technology（国立产业技术综合研究所）；Department of Advanced Materials Science, Graduate School of Frontier Sciences, The University of Tokyo（东京大学前沿科学研究生院先进材料科学系）
Antiperovskite materials are well known for their high thermoelectric performance and gained huge research interest. Here, we report the structural stability and transport properties of Sr$_3$AsN from a precise first-principles study. The calculated equilibrium lattice parameters are in a good agreement with the available data. We find that Sr$_3$AsN is a mechanically, energetically and dynamically stable at ambient condition. Our calculated electronic structure indicates that it is a direct bandgap semiconductor, with a value ~1.2 eV. Sr-4d and N-2p orbitals mainly formulate the direct bandga…
The current state-of-the-art thermoelectric materials are generally composed of expensive, scarce, and toxic elements. In this respect, copper-based sulfide compounds have emerged as viable alternatives. Herein, we report for the first time the successful synthesis of single-phase cubic isocubanite CuFe2S3 using mechanical-alloying combined with microwave-assisted synthesis. The isocubanite phase synthesized via this ultra-fast out-of-equilibrium process exhibits a maximum thermoelectric figure of merit, zTmax ~ 0.14 at 673 K. Besides the thermoelectric properties, insights about the structure…
We report the structural, mechanical, electronic, optical, thermoelectric properties and spectroscopic limited maximum efficiency (SLME) of oxide double perovskite structure Ba2SbNbO6 and Ba2SbTaO6 compounds. All the investigations were performed through the first-principles density functional theory (DFT). The obtained values for the elastic constants reveal the mechanical stability of the studied compounds. The calculated data of bulk modulus (B), shear modulus (G), and Young's modulus (E) for Ba2SbTaO6 are found to be greater than those of Ba2SbNbO6. The ratio of Bulk to shear ratio (B/G) s…
Thermal variation of structural property, linear thermal expansion coefficient, resistivity, thermopower and power factor of polycrystalline Bi1-xSbx (x=0.10, 0.14) samples are reported. Temperature-dependent powder diffraction experiments indicate that samples do not undergo any structural phase transition. Rietveld refinement technique has been used to perform detailed structural analysis. Temperature dependence of thermal expansion coefficient is found to be stronger for Bi0.90Sb0.10. Also, power factor for direct band gap Bi0.90Sb0.10 is higher as compared to that for indirect band gap Bi0…
SnSe monolayers experience a temperature induced two-dimensional Pnm2$_1 \to$ P4/nmm structural transformation precipitated by the softening of vibrational modes. The standard theoretical treatment of thermoelectricity---which relies on a zero temperature phonon dispersion and on a zero temperature electronic structure---is incapable of describing thermoelectric phenomena induced by structural transformations. Relying on structural data obtained from {\em ab initio} molecular dynamics calculations that is utilized in a non-standard way to inform of electronic and vibrational transport coeffici…
Thickness and strain effects on the thermoelectric transport in nanostructured Bi2Se3
利用van der Waals密度泛函理论和半经典Boltzmann理论研究了Bi 2 Se 3的1 ~ 6个五重层结构的结构稳定性、电子结构和热输运性质.对于单个QL，带隙为0.41 eV，当QL的数量增加到6个时，带隙减小到0.23 eV。单个QL具有比块体材料（0.10）显著更高的热电优值（0.27），其可以通过引入2.5%压缩应变进一步增强到0.30。正的声子频率下的应变表明，结构的稳定性保持。
Recently, Fang et al. have predicted a high ZT of 1.54 in TaSbRu alloys at 1200 K from first-principles without considering spin-orbit interaction, accurate electronic structure, details of phonon scattering, and energy-dependent holes relaxation time. Here, we report the details of structural stability and thermoelectric performance of Bi-Substituted p-type TaSbRu from first-principles calculations considering theses important parameters. This indirect bandgap semiconductor (Eg=0.8 eV by TB-mBJ+SOC) has highly dispersive and degenerate valence bands, which lead to a maximum power factor, 3.8 …
Thermodynamic Phase Stability, Structural, Mechanical, Optoelectronic, and Thermoelectric Properties of the III-V Semiconductor AlSb for Energy Conversion Applications
S.U. Umarov Physical-Technical Institute of NAST（纳兹尔科学院苏·乌马尔物理技术研究所）；School of Optoelectronic Engineering & CQUPT-BUL Innovation Institute, Chongqing University of Posts and Telecommunications（重庆邮电大学光电工程学院与CQUPT-BUL创新学院）
Ternary chalcogenides have been of recent investigation for applications in photovoltaic and thermoelectric devices. We study the structural, electronic, optical, and thermoelectric properties of nine ternary chalcogenides, NaAX$_{2}$, where A represents pnictogens (As, Sb, and Te) and X represents chalcogens (S, Se, and Te). Calculations based on density functional theory yield the following results: (i) phonon dispersion curves predict three of the compounds, NaAsS$_{2}$, NaSbS$_{2}$, and NaSbSe$_{2}$, to be dynamically stable in the monoclinic, C2/c, structure, (ii) the layered atomistic co…
Ferroelectric domain walls are boundaries between regions with different polarization orientations in a ferroelectric material. Using first principles calculations, we characterize all different types of domain walls forming on ($11\bar{1}$), ($111$) and ($1\bar{1}0$) crystallographic planes in thermoelectric GeTe. We find large structural distortions in the vicinity of most of these domain walls, which are driven by polarization variations. We show that such strong strain-order parameter coupling will considerably reduce the lattice thermal conductivity of GeTe samples containing domain walls…
Thermoelectric materials (TMs) can uniquely convert waste heat into electricity, which provides a potential solution for the global energy crisis that is increasingly severe. Bulk Cu2Se, with ionic conductivity of Cu ions, exhibits a significant enhancement of its thermoelectric figure of merit zT by a factor of ~3 near its structural transition around 400 K. Here, we show a systematic study of the electronic structure of Cu2Se and its temperature evolution using high-resolution angle-resolved photoemission spectroscopy. Upon heating across the structural transition, the electronic states near…
We perform a comparative study on thermoelectric performance of antiperovskite oxides $Ae_3Tt$O and nitrides $Ae_3Pn$N ($Ae=$ Ca, Sr, Ba; $Tt=$ Ge, Sn, Pb; $Pn=$ As, Sb, Bi) by means of first-principles calculation. As for the oxides with the cubic structure, Ca$_3$GeO with a sizable band gap exhibits high thermoelectric performance at high temperatures, while Ba$_3$PbO with Dirac cones without the gap is favorable at low temperatures. The latter high performance owes to high valley degeneracy including the multiple Dirac cones and the valleys near the $Γ$ and R points. For the nitrides with t…
Perovskite compounds have the potential to harvest solar energy as well as exploit the thermoelectric potential of a number of available materials. Here, we present the electronic, structural, thermoelectric, and optical properties of Cs2AgSbX6 (X = Cl, Br, I) perovskite with the help of the density functional theory (DFT). The WC-GGA approximation was used to calculate the structural parameters. All these compounds crystalize in a cubic unit cell with lattice constant increasing from 10.65 Å (Cl) to 11.14 Å (Br) to 11.86 Å (I). The mBJ-functional shows a semiconducting nature for these compou…
Lead and tin chalcogenides have been studied widely due to their promising thermoelectric (TE) properties. Further enhancement in their TE efficiency has been reported upon the reduction of the dimension, which is an important feature in modern device fabrications. Using density functional theory combined with the Semi-classical Boltzmann transport theory, we studied the structural, electronic and TE properties of two-dimensional (2D) MX (M = Sn, Pb; X = S, Te) monolayers. Spin-orbit coupling was found to have significant effects on their electronic structure, particularly for the heavy compou…
First principal investigation of Structural optical and thermoelectric properties of hybrid organic-inorganic perovskite $[NH_3-(CH_2)_4-NH_3]CdCl_4$ compound
On the basis of density functional theory and semi-classical Boltzmann theory, we have investigated the structural, elastic, electronic, optical and thermoelectric properties of 18--valence electron count rhodium based half-Heusler alloys focusing on RhTiP, RhTiAs, RhTiSb, and RhTiBi. The absence of imaginary frequencies in the phonon dispersion curve for these system verifies that they are structurally stable. RhTiP is ductile in nature, while others are brittle. The alloys are found to be semiconducting with indirect band gaps ranging from 0.94 to 1.01 eV. Our calculations suggest these mate…
First-principles study of photovoltaic and thermoelectric properties of AgBiSCl2
School of Materials Science and Physics, China University of Mining and Technology（中国矿业大学材料科学与工程学院）；School of Mechanics and Civil Engineering, China University of Mining and Technology（中国矿业大学力学与土木工程学院）
Tin chalcogenides (SnS, SnSe, and SnTe) are found to have improved thermoelectric properties upon the reduction of their dimensionality. Here we found the tilted AA + s stacked two-dimensional (2D) SnTe bilayer as the most stable phase among several stackings as predicted by the structural optimization and phonon transport properties. The carrier mobility and relaxation time are evaluated using the deformation potential theory, which is found to be relatively high due to the high 2D elastic modulus, low deformation potential constant, and moderate effective masses. The SnTe bilayer shows a hig…
Two-dimensional (2D) metal halides have received more attention because of their electronic and optoelectronic properties. Recently, researchers are interested to investigate the thermoelectric properties of metal halide monolayers because of their ultralow lattice conductivity, high Seebeck coefficient and figure of merit. Here, we have investigated thermoelectric and optoelectronic properties of XI$_2$ (X=Sn and Si) monolayers with the help of density functional theory and Boltzmann transport equation. The structural parameters have been optimized with relaxation of atomic positions. Excelle…
Utilizing a material in thermoelectric applications requires a mechanical, thermal, and lattice stability as well a high figure of merit (ZT). In this work, we present the structural, electronic, magnetic, mechanical, thermodynamic, dynamic, and thermoelectric properties of CoFeYGe (Y = Ti, Cr) quaternary Heusler compounds using the density functional theory (DFT). The calculated mechanical properties and phonon dispersions reveal that the structures of these compounds are stable. Both CoFeCrGe and CoFeTiGe compounds show a ferromagnetic and ferrimagnetic half-metallic behavior with band gaps …
Thermoelectric power factors of defective scandium nitride nanostructures from first principles
IT4Innovations, VŠB – Technical University of Ostrava（俄斯特拉发理工大学 IT4 创新中心）；Department of Condensed Matter Physics, Faculty of Mathematics and Physics, Charles University（查理大学数学与物理学院凝聚态物理系）
Effect of Pb doping on the crystallization process and thermoelectric properties of Ge2Sb2Te5 phase change material
A.B. Nalbandyan Institute of Chemical Physics NAS RA（纳尔班扬化学物理研究所）；Belgorod State University（别尔哥罗德国立大学）；Institute of Radiophysics and Electronics NAS RA（无线电物理与电子研究所）
Highly oriented polymer films can show considerable anisotropy in the thermoelectric properties leading to power factors beyond those predicted by the widely obeyed power law linking the thermopower $S$ and the electrical conductivity $σ$ as $S\proptoσ^{-1/4}$. This has led to encouraging practical results with respect to the electrical conductivity, notwithstanding that the conditions necessary to enhance $σ$ and $S$ simultaneously are less clear. Here, kinetic Monte Carlo simulations are used to study the impact of structural anisotropy on the thermoelectric properties of disordered organic …
