Infrastructure-based Multi-Camera Calibration using Radial Projections
ETH Zürich（苏黎世联邦理工学院）；Czech Technical University in Prague（布拉格捷克理工大学）；Microsoft Mixed Reality & AI Zürich Lab（微软混合现实与人工智能苏黎世实验室）；Chalmers University of Technology（查尔姆斯理工大学）
Yukai Lin, Viktor Larsson, Marcel Geppert, Zuzana Kukelova, Marc Pollefeys, Torsten Sattler
Multi-camera systems are an important sensor platform for intelligent systems such as self-driving cars. Pattern-based calibration techniques can be used to calibrate the intrinsics of the cameras individually. However, extrinsic calibration of systems with little to no visual overlap between the cameras is a challenge. Given the camera intrinsics, infrastucture-based calibration techniques are able to estimate the extrinsics using 3D maps pre-built via SLAM or Structure-from-Motion. In this paper, we propose to fully calibrate a multi-camera system from scratch using an infrastructure-based approach. Assuming that the distortion is mainly radial, we introduce a two-stage approach. We first estimate the camera-rig extrinsics up to a single unknown translation component per camera. Next, we solve for both the intrinsic parameters and the missing translation components. Extensive experiments on multiple indoor and outdoor scenes with multiple multi-camera systems show that our calibration method achieves high accuracy and robustness. In particular, our approach is more robust than the naive approach of first estimating intrinsic parameters and pose per camera before refining the extrinsic parameters of the system. The implementation is available at https://github.com/youkely/InfrasCal.
As neuromorphic technology is maturing, its application to robotics and autonomous vehicle systems has become an area of active research. In particular, event cameras have emerged as a compelling alternative to frame-based cameras in low-power and latency-demanding applications. To enable event cameras to operate alongside staple sensors like lidar in perception tasks, we propose a direct, temporally-decoupled extrinsic calibration method between event cameras and lidars. The high dynamic range, high temporal resolution, and low-latency operation of event cameras are exploited to directly regi…
The University of Sydney（悉尼大学）；The Australian Centre for Field Robotics（澳大利亚现场机器人中心）
Line scanning cameras, which capture only a single line of pixels, have been increasingly used in ground based mobile or robotic platforms. In applications where it is advantageous to directly georeference the camera data to world coordinates, an accurate estimate of the camera's 6D pose is required. This paper focuses on the common case where a mobile platform is equipped with a rigidly mounted line scanning camera, whose pose is unknown, and a navigation system providing vehicle body pose estimates. We propose a novel method that estimates the camera's pose relative to the navigation system.…
Toyota Technological Institute at Chicago（芝加哥丰田技术研究所）；Toyota Research Institute（丰田研究院）
Camera calibration is integral to robotics and computer vision algorithms that seek to infer geometric properties of the scene from visual input streams. In practice, calibration is a laborious procedure requiring specialized data collection and careful tuning. This process must be repeated whenever the parameters of the camera change, which can be a frequent occurrence for mobile robots and autonomous vehicles. In contrast, self-supervised depth and ego-motion estimation approaches can bypass explicit calibration by inferring per-frame projection models that optimize a view synthesis objectiv…
For autonomous vehicles, an accurate calibration for LiDAR and camera is a prerequisite for multi-sensor perception systems. However, existing calibration techniques require either a complicated setting with various calibration targets, or an initial calibration provided beforehand, which greatly impedes their applicability in large-scale autonomous vehicle deployment. To tackle these issues, we propose a novel method to calibrate the extrinsic parameter for LiDAR and camera in road scenes. Our method introduces line features from static straight-line-shaped objects such as road lanes and pole…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
Camera calibration plays a critical role in various computer vision tasks such as autonomous driving or augmented reality. Widely used camera calibration tools utilize plane pattern based methodology, such as using a chessboard or AprilTag board, user's calibration expertise level significantly affects calibration accuracy and consistency when without clear instruction. Furthermore, calibration is a recurring task that has to be performed each time the camera is changed or moved. It's also a great burden to calibrate huge amounts of cameras such as Driver Monitoring System (DMS) cameras in a p…
Sensor-based environmental perception is a crucial step for autonomous driving systems, for which an accurate calibration between multiple sensors plays a critical role. For the calibration of LiDAR and camera, the existing method is generally to calibrate the intrinsic of the camera first and then calibrate the extrinsic of the LiDAR and camera. If the camera's intrinsic is not calibrated correctly in the first stage, it isn't easy to calibrate the LiDAR-camera extrinsic accurately. Due to the complex internal structure of the camera and the lack of an effective quantitative evaluation method…
The integration of multiple cameras and 3D Li- DARs has become basic configuration of augmented reality devices, robotics, and autonomous vehicles. The calibration of multi-modal sensors is crucial for a system to properly function, but it remains tedious and impractical for mass production. Moreover, most devices require re-calibration after usage for certain period of time. In this paper, we propose a single-shot solution for calibrating extrinsic transformations among multiple cameras and 3D LiDARs. We establish a panoramic infrastructure, in which a camera or LiDAR can be robustly localize…
Accurate LiDAR-camera extrinsic calibration is a precondition for many multi-sensor systems in mobile robots. Most calibration methods rely on laborious manual operations and calibration targets. While working online, the calibration methods should be able to extract information from the environment to construct the cross-modal data association. Convolutional neural networks (CNNs) have powerful feature extraction ability and have been used for calibration. However, most of the past methods solve the extrinsic as a regression task, without considering the geometric constraints involved. In thi…
This work presents a technique for localization of a smart infrastructure node, consisting of a fisheye camera, in a prior map. These cameras can detect objects that are outside the line of sight of the autonomous vehicles (AV) and send that information to AVs using V2X technology. However, in order for this information to be of any use to the AV, the detected objects should be provided in the reference frame of the prior map that the AV uses for its own navigation. Therefore, it is important to know the accurate pose of the infrastructure camera with respect to the prior map. Here we propose …
Lahore University of Management Sciences（拉合尔管理科学大学）
Camera calibration is a necessity in various tasks including 3D reconstruction, hand-eye coordination for a robotic interaction, autonomous driving, etc. In this work we propose a novel method to predict extrinsic (baseline, pitch, and translation), intrinsic (focal length and principal point offset) parameters using an image pair. Unlike existing methods, instead of designing an end-to-end solution, we proposed a new representation that incorporates camera model equations as a neural network in multi-task learning framework. We estimate the desired parameters via novel camera projection loss …
Lahore University of Management Sciences（拉合尔管理科学大学）
For a number of tasks, such as 3D reconstruction, robotic interface, autonomous driving, etc., camera calibration is essential. In this study, we present a unique method for predicting intrinsic (principal point offset and focal length) and extrinsic (baseline, pitch, and translation) properties from a pair of images. We suggested a novel method where camera model equations are represented as a neural network in a multi-task learning framework, in contrast to existing methods, which build a comprehensive solution. By reconstructing the 3D points using a camera model neural network and then usi…
Compact and low-cost devices are needed for autonomous driving to image and measure distances to objects 360-degree around. We have been developing an omnidirectional stereo camera exploiting two hyperbolic mirrors and a single set of a lens and sensor, which makes this camera compact and cost efficient. We establish a new calibration method for this camera considering higher-order radial distortion, detailed tangential distortion, an image sensor tilt, and a lens-mirror offset. Our method reduces the calibration error by 6.0 and 4.3 times for the upper- and lower-view images, respectively. Th…
Visvesvaraya National Institute of Technology（维什韦什瓦拉亚国家理工学院）；Polytechnique Montréal（蒙特利尔综合理工学院）
We propose a method for automatic calibration of a traffic surveillance camera with wide-angle lenses. Video footage of a few minutes is sufficient for the entire calibration process to take place. This method takes in the height of the camera from the ground plane as the only user input to overcome the scale ambiguity. The calibration is performed in two stages, 1. Intrinsic Calibration 2. Extrinsic Calibration. Intrinsic calibration is achieved by assuming an equidistant fisheye distortion and an ideal camera model. Extrinsic calibration is accomplished by estimating the two vanishing points…
Calibration of multi-camera systems, i.e. determining the relative poses between the cameras, is a prerequisite for many tasks in computer vision and robotics. Camera calibration is typically achieved using offline methods that use checkerboard calibration targets. These methods, however, often are cumbersome and lengthy, considering that a new calibration is required each time any camera pose changes. In this work, we propose a novel, marker-free online method for the extrinsic calibration of multiple smart edge sensors, relying solely on 2D human keypoint detections that are computed locally…
ShanghaiTech University（上海科技大学）；Shanghai Engineering Research Center of Intelligent Vision and Imaging（上海智能视觉成像工程技术研究中心）
Camera calibration is an important prerequisite towards the solution of 3D computer vision problems. Traditional methods rely on static images of a calibration pattern. This raises interesting challenges towards the practical usage of event cameras, which notably require image change to produce sufficient measurements. The current standard for event camera calibration therefore consists of using flashing patterns. They have the advantage of simultaneously triggering events in all reprojected pattern feature locations, but it is difficult to construct or use such patterns in the field. We prese…
Australian Centre for Field Robotics（澳大利亚现场机器人中心）；The University of Sydney（悉尼大学）
There are a multitude of emerging imaging technologies that could benefit robotics. However the need for bespoke models, calibration and low-level processing represents a key barrier to their adoption. In this work we present NOCaL, Neural odometry and Calibration using Light fields, a semi-supervised learning architecture capable of interpreting previously unseen cameras without calibration. NOCaL learns to estimate camera parameters, relative pose, and scene appearance. It employs a scene-rendering hypernetwork pretrained on a large number of existing cameras and scenes, and adapts to previo…
Robert Bosch GmbH（罗伯特·博世公司）；Institute of Measurement & Control Systems（测量与控制工程研究所）；Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）
Most approaches to camera calibration rely on calibration targets of well-known geometry. During data acquisition, calibration target and camera system are typically moved w.r.t. each other, to allow image coverage and perspective versatility. We show that moving the target can lead to small temporary deformations of the target, which can introduce significant errors into the calibration result. While static inaccuracies of calibration targets have been addressed in previous works, to our knowledge, none of the existing approaches can capture time-varying, dynamic deformations. To achieve high…
Institute of Industrial Science, The University of Tokyo（东京大学产业技术研究所）；Microsoft（微软）
In this paper, we propose a method of targetless and automatic Camera-LiDAR calibration. Our approach is an extension of hand-eye calibration framework to 2D-3D calibration. By using the sensor fusion odometry method, the scaled camera motions are calculated with high accuracy. In addition to this, we clarify the suitable motion for this calibration method. The proposed method only requires the three-dimensional point cloud and the camera image and does not need other information such as reflectance of LiDAR and to give initial extrinsic parameter. In the experiments, we demonstrate our method…
University of Nevada, Reno（内华达大学雷诺分校）；NTNU - Norwegian University of Science and Technology（挪威科技大学）
This report accompanies a dataset release on visual and thermal camera data and details a procedure followed to align such multi-modal camera frames in order to provide pixel-level correspondence between the two without using intrinsic or extrinsic calibration information. To achieve this goal we benefit from progress in the domain of multi-modal image alignment and specifically employ the Mattes Mutual Information Metric to guide the registration process. In the released dataset we release both the raw visual and thermal camera data, as well as the aligned frames, alongside calibration parame…
Traditional approaches to extrinsic calibration use fiducial markers and learning-based approaches rely heavily on simulation data. In this work, we present a learning-based markerless extrinsic calibration system that uses a depth camera and does not rely on simulation data. We learn models for end-effector (EE) segmentation, single-frame rotation prediction and keypoint detection, from automatically generated real-world data. We use a transformation trick to get EE pose estimates from rotation predictions and a matching algorithm to get EE pose estimates from keypoint predictions. We further…
IT+Robotics（IT+机器人公司）；University of Padua（帕多瓦大学）；Sapienza University of Rome（罗马第一大学）
Color-depth cameras (RGB-D cameras) have become the primary sensors in most robotics systems, from service robotics to industrial robotics applications. Typical consumer-grade RGB-D cameras are provided with a coarse intrinsic and extrinsic calibration that generally does not meet the accuracy requirements needed by many robotics applications (e.g., highly accurate 3D environment reconstruction and mapping, high precision object recognition and localization, ...). In this paper, we propose a human-friendly, reliable and accurate calibration framework that enables to easily estimate both the in…
Camera calibration for estimating the intrinsic parameters and lens distortion is a prerequisite for various monocular vision applications including feature tracking and video stabilization. This application paper proposes a model for estimating the parameters on the fly by fusing gyroscope and camera data, both readily available in modern day smartphones. The model is based on joint estimation of visual feature positions, camera parameters, and the camera pose, the movement of which is assumed to follow the movement predicted by the gyroscope. Our model assumes the camera movement to be free,…
Event cameras output asynchronous events to represent intensity changes with a high temporal resolution, even under extreme lighting conditions. Currently, most of the existing works use a single contrast threshold to estimate the intensity change of all pixels. However, complex circuit bias and manufacturing imperfections cause biased pixels and mismatch contrast threshold among pixels, which may lead to undesirable outputs. In this paper, we propose a new event camera model and two calibration approaches which cover event-only cameras and hybrid image-event cameras. When intensity images are…
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
This paper proposes an automated method to obtain the extrinsic calibration parameters between a camera and a 3D lidar with as low as 16 beams. We use a checkerboard as a reference to obtain features of interest in both sensor frames. The calibration board centre point and normal vector are automatically extracted from the lidar point cloud by exploiting the geometry of the board. The corresponding features in the camera image are obtained from the camera's extrinsic matrix. We explain the reasons behind selecting these features, and why they are more robust compared to other possibilities. To…
With information from multiple input modalities, sensor fusion-based algorithms usually out-perform their single-modality counterparts in robotics. Camera and LIDAR, with complementary semantic and depth information, are the typical choices for detection tasks in complicated driving environments. For most camera-LIDAR fusion algorithms, however, the calibration of the sensor suite will greatly impact the performance. More specifically, the detection algorithm usually requires an accurate geometric relationship among multiple sensors as the input, and it is often assumed that the contents from …
School of Computer Science and Engineering, Central South University（中南大学计算机科学与工程学院）
In many scenarios where cameras are applied, such as robot positioning and unmanned driving, camera calibration is one of the most important pre-work. The interactive calibration method based on the plane board is becoming popular in camera calibration field due to its repeatability and operation advantages. However, the existing methods select suggestions from a fixed dataset of pre-defined poses based on subjective experience, which leads to a certain degree of one-sidedness. Moreover, they does not give users clear instructions on how to place the board in the specified pose.
The task of camera calibration is to estimate the intrinsic and extrinsic parameters of a camera model. Though there are some restricted techniques to infer the 3-D information about the scene from uncalibrated cameras, effective camera calibration procedures will open up the possibility of using a wide range of existing algorithms for 3-D reconstruction and recognition. The applications of camera calibration include vision-based metrology, robust visual platooning and visual docking of mobile robots where the depth information is important.
Robert Bosch GmbH（罗伯特·博世有限公司）；Karlsruher Institute of Technology (KIT)（卡尔斯鲁厄理工学院（KIT））
Accurate camera calibration is a precondition for many computer vision applications. Calibration errors, such as wrong model assumptions or imprecise parameter estimation, can deteriorate a system's overall performance, making the reliable detection and quantification of these errors critical. In this work, we introduce an evaluation scheme to capture the fundamental error sources in camera calibration: systematic errors (biases) and uncertainty (variance). The proposed bias detection method uncovers smallest systematic errors and thereby reveals imperfections of the calibration setup and prov…
Fish-eye cameras are becoming increasingly popular in computer vision, but their use for 3D measurement is limited partly due to the lack of an accurate, efficient and user-friendly calibration procedure. For such a purpose, we propose a method to calibrate the intrinsic and extrinsic parameters (including radial distortion parameters) of two/multiple fish-eye cameras simultaneously by using a wand under general motions. Thanks to the generic camera model used, the proposed calibration method is also suitable for two/multiple conventional cameras and mixed cameras (e.g. two conventional camera…
University of Illinois, Urbana-Champaign（伊利诺伊大学厄巴纳-香槟分校）；Institute for Infocomm Research（信息通信研究院）；National University of Singapore（新加坡国立大学）
Depth sensing devices have created various new applications in scientific and commercial research with the advent of Microsoft Kinect and PMD (Photon Mixing Device) cameras. Most of these applications require the depth cameras to be pre-calibrated. However, traditional calibration methods using a checkerboard do not work very well for depth cameras due to the low image resolution. In this paper, we propose a depth calibration scheme which excels in estimating camera calibration parameters when only a handful of corners and calibration images are available. We exploit the noise properties of PM…
Institute for AI Industry Research (AIR), Tsinghua University（清华大学人工智能产业研究院（AIR））；Beihang University（北京航空航天大学）
In autonomous driving, Vehicle-Infrastructure Cooperative 3D Object Detection (VIC3D) makes use of multi-view cameras from both vehicles and traffic infrastructure, providing a global vantage point with rich semantic context of road conditions beyond a single vehicle viewpoint. Two major challenges prevail in VIC3D: 1) inherent calibration noise when fusing multi-view images, caused by time asynchrony across cameras; 2) information loss when projecting 2D features into 3D space. To address these issues, We propose a novel 3D object detection framework, Vehicles-Infrastructure Multi-view Interm…
