In the typical urban intersection scenario, both vehicles and infrastructures are equipped with visual and LiDAR sensors. By successfully integrating the data from vehicle-side and road monitoring devices, a more comprehensive and accurate environmental perception and information acquisition can be achieved. The Calibration of sensors, as an essential component of autonomous driving technology, has consistently drawn significant attention. Particularly in scenarios involving multiple sensors collaboratively perceiving and addressing localization challenges, the requirement for inter-sensor calibration becomes crucial. Recent years have witnessed the emergence of the concept of multi-end cooperation, where infrastructure captures and transmits surrounding environment information to vehicles, bolstering their perception capabilities while mitigating costs. However, this also poses technical complexities, underscoring the pressing need for diverse end calibration. Camera and LiDAR, the bedrock sensors in autonomous driving, exhibit expansive applicability. This paper comprehensively examines and analyzes the calibration of multi-end camera-LiDAR setups from vehicle, roadside, and vehicle-road cooperation perspectives, outlining their relevant applications and profound significance. Concluding with a summary, we present our future-oriented ideas and hypotheses.
The Hong Kong University of Science and Technology（香港科技大学）；Huawei Technologies（华为技术有限公司）
Extrinsic perturbation always exists in multiple sensors. In this paper, we focus on the extrinsic uncertainty in multi-LiDAR systems for 3D object detection. We first analyze the influence of extrinsic perturbation on geometric tasks with two basic examples. To minimize the detrimental effect of extrinsic perturbation, we propagate an uncertainty prior on each point of input point clouds, and use this information to boost an approach for 3D geometric tasks. Then we extend our findings to propose a multi-LiDAR 3D object detector called MLOD. MLOD is a two-stage network where the multi-LiDAR in…
A Target-based Multi-LiDAR Multi-Camera Extrinsic Calibration System
Research \& Development, Toyota Material Handling Manufacturing, Bologna Italy Department of Information Engineering, University of Pisa, Pisa, Italy School of Engineering；Materials Science, Queen Mary University of London, London, United Kingdom
DST-Calib: A Dual-Path, Self-Supervised, Target-Free LiDAR-Camera Extrinsic Calibration Network
Department of Control Science & Engineering, the College of Electronics & Information Engineering, Tongji University（控制科学与工程系，电子与信息工程学院，同济大学）；Department of Mechanical Engineering, the School of Mechanical Engineering, Tongji University（机械工程系，机械工程学院，同济大学）；School of Robotics, Hunan University（机器人学院，湖南大学）；College of Intelligence Science and Technology, National University of Defense Technology（智能科学与技术学院，国防科学技术大学）；Department of Control Science & Engineering, the College of Electronics & Information Engineering, Shanghai Research Institute for Intelligent Autonomous Systems, the State Key Laboratory of Intelligent Autonomous Systems, and Frontiers Science Center for Intelligent Autonomous Systems, Tongji University（控制科学与工程系，电子与信息工程学院，上海智能自主系统研究院，智能自主系统国家重点实验室，智能自主系统前沿科学中心，同济大学）；National Key Laboratory of Human-Machine Hybrid Augmented Intelligence, Institute of Artificial Intelligence and Robotics, Xi’an Jiaotong University（人机混合增强智能国家重点实验室，人工智能与机器人研究院，西安交通大学）
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
RECO: Region-Aware Compensation for Extrinsic Perturbations in Roadside 3D Detection
School of Intelligent Systems Engineering, Sun Yat-sen University（中山大学智能系统工程学院）；Faculty of Applied Sciences, Macao Polytechnic University（澳门理工大学应用科学学院）
CLRNet: Targetless Extrinsic Calibration for Camera, Lidar and 4D Radar Using Deep Learning
Hungarian Research Network Institute for Computer Science and Control (HUN-REN SZTAKI)（匈牙利研究网络计算机科学与控制研究所）；Pázmány Péter Catholic University（帕兹曼·佩斯特天主教大学）；Intelligent Vehicles Group, TU Delft（智能车辆组，代尔夫特理工大学）；Perciv AI
CO^3: Cooperative Unsupervised 3D Representation Learning for Autonomous Driving
The University of Hong Kong（香港大学）；Shanghai AI Laboratory（上海人工智能实验室）；Huawei Noah’s Ark Lab（华为诺亚实验室）；The Chinese University of Hong Kong（香港中文大学）；Hong Kong University of Science and Technology（香港科技大学）
Iterative Camera-LiDAR Extrinsic Optimization via Surrogate Diffusion
School of Automation, Beijing Institute of Technology（自动化学院，北京理工大学）；Centre for Robotics Research, Department of Engineering, King’s College London（机器人研究中心，工程系，伦敦大学国王学院）；School of Integrated Circuits and Electronics, Beijing Institute of Technology（集成电路与电子学院，北京理工大学）
KCIS, International Institute of Information Technology Hyderabad（KCIS，海得拉巴国际信息技术学院）
Detecting small obstacles on the road is critical for autonomous driving. In this paper, we present a method to reliably detect such obstacles through a multi-modal framework of sparse LiDAR(VLP-16) and Monocular vision. LiDAR is employed to provide additional context in the form of confidence maps to monocular segmentation networks. We show significant performance gains when the context is fed as an additional input to monocular semantic segmentation frameworks. We further present a new semantic segmentation dataset to the community, comprising of over 3000 image frames with corresponding LiD…
As neuromorphic technology is maturing, its application to robotics and autonomous vehicle systems has become an area of active research. In particular, event cameras have emerged as a compelling alternative to frame-based cameras in low-power and latency-demanding applications. To enable event cameras to operate alongside staple sensors like lidar in perception tasks, we propose a direct, temporally-decoupled extrinsic calibration method between event cameras and lidars. The high dynamic range, high temporal resolution, and low-latency operation of event cameras are exploited to directly regi…
Native-Domain Cross-Attention for Camera-LiDAR Extrinsic Calibration Under Large Initial Perturbations
School of Automation, Beijing Institute of Technology（北京理工大学自动化学院）；School of Integrated Circuits and Electronics, Beijing Institute of Technology（北京理工大学集成电路与电子学院）
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
This paper proposes an automated method to obtain the extrinsic calibration parameters between a camera and a 3D lidar with as low as 16 beams. We use a checkerboard as a reference to obtain features of interest in both sensor frames. The calibration board centre point and normal vector are automatically extracted from the lidar point cloud by exploiting the geometry of the board. The corresponding features in the camera image are obtained from the camera's extrinsic matrix. We explain the reasons behind selecting these features, and why they are more robust compared to other possibilities. To…
Hong Kong University of Science and Technology（香港科技大学）
Combining multiple LiDARs enables a robot to maximize its perceptual awareness of environments and obtain sufficient measurements, which is promising for simultaneous localization and mapping (SLAM). This paper proposes a system to achieve robust and simultaneous extrinsic calibration, odometry, and mapping for multiple LiDARs. Our approach starts with measurement preprocessing to extract edge and planar features from raw measurements. After a motion and extrinsic initialization procedure, a sliding window-based multi-LiDAR odometry runs onboard to estimate poses with online calibration refine…
Handong Global University（韩东国际大学）；Virginia Tech（弗吉尼亚理工大学）
This paper presents a novel automatic calibration system to estimate the extrinsic parameters of LiDAR mounted on a mobile platform for sensor misalignment inspection in the large-scale production of highly automated vehicles. To obtain subdegree and subcentimeter accuracy levels of extrinsic calibration, this study proposed a new concept of a target board with embedded photodetector arrays, named the PD-target system, to find the precise position of the correspondence laser beams on the target surface. Furthermore, the proposed system requires only the simple design of the target board at the…
YOCO: You Only Calibrate Once for Accurate Extrinsic Parameter in LiDAR-Camera Systems
China University of Mining and Technology (Beijing)（中国矿业大学（北京））；College of Geoscience and Surveying Engineering, China University of Mining and Technology (Beijing)（中国矿业大学（北京）地球科学与测绘工程学院）
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hong Kong University of Science and Technology（香港科技大学）；HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute（香港科技大学深港协同创新研究院）；CWB Institute of Autonomous Driving（CWB自动驾驶研究院）
The combination of LiDARs and cameras enables a mobile robot to perceive environments with multi-modal data, becoming a key factor in achieving robust perception. Traditional frame cameras are sensitive to changing illumination conditions, motivating us to introduce novel event cameras to make LiDAR-camera fusion more complete and robust. However, to jointly exploit these sensors, the challenging extrinsic calibration problem should be addressed. This paper proposes an automatic checkerboard-based approach to calibrate extrinsics between a LiDAR and a frame/event camera, where four contributio…
This paper presents a framework for the targetless extrinsic calibration of stereo cameras and Light Detection and Ranging (LiDAR) sensors with a non-overlapping Field of View (FOV). In order to solve the extrinsic calibrations problem under such challenging configuration, the proposed solution exploits road markings as static and robust features among the various dynamic objects that are present in urban environment. First, this study utilizes road markings that are commonly captured by the two sensor modalities to select informative images for estimating the extrinsic parameters. In order to…
Sensor setups consisting of a combination of 3D range scanner lasers and stereo vision systems are becoming a popular choice for on-board perception systems in vehicles; however, the combined use of both sources of information implies a tedious calibration process. We present a method for extrinsic calibration of lidar-stereo camera pairs without user intervention. Our calibration approach is aimed to cope with the constraints commonly found in automotive setups, such as low-resolution and specific sensor poses. To demonstrate the performance of our method, we also introduce a novel approach f…
Accurate Measurement of 3D and 2D Circular Centers With Application to LiDAR-Camera Extrinsic Calibration
Thrust of Robotics and Autonomous Systems, The Hong Kong University of Science and Technology (Guangzhou)（机器人与自主系统研究所，香港科技大学（广州））；Lower Airspace Economy Research Institute, International Digital Economy Academy, ShenZhen（空域经济研究所，国际数字经济学院）；Horizon-Continental Technology Corporation（Horizon-Continental技术公司）；State Key Laboratory of Rail Traffic Control and Safety and the Beijing Engineering Research Center of EMC and GNSS Technology for Rail Transportation, School of Electronic and Information Engineering, Beijing Jiaotong University（轨道交通控制与安全国家重点实验室，北京交通大学电子信息工程学院，电磁兼容与GNSS技术轨道交通工程研究中心）
This paper presents a novel method for fully automatic and convenient extrinsic calibration of a 3D LiDAR and a panoramic camera with a normally printed chessboard. The proposed method is based on the 3D corner estimation of the chessboard from the sparse point cloud generated by one frame scan of the LiDAR. To estimate the corners, we formulate a full-scale model of the chessboard and fit it to the segmented 3D points of the chessboard. The model is fitted by optimizing the cost function under constraints of correlation between the reflectance intensity of laser and the color of the chessboar…
Situational awareness as a necessity in the connected and autonomous vehicles (CAV) domain is the subject of a significant number of researches in recent years. The driver's safety is directly dependent on the robustness, reliability, and scalability of such systems. Cooperative mechanisms have provided a solution to improve situational awareness by utilizing high speed wireless vehicular networks. These mechanisms mitigate problems such as occlusion and sensor range limitation. However, the network capacity is a factor determining the maximum amount of information being shared among cooperati…
Cooperative perception allows a Connected Autonomous Vehicle (CAV) to interact with the other CAVs in the vicinity to enhance perception of surrounding objects to increase safety and reliability. It can compensate for the limitations of the conventional vehicular perception such as blind spots, low resolution, and weather effects. An effective feature fusion model for the intermediate fusion methods of cooperative perception can improve feature selection and information aggregation to further enhance the perception accuracy. We propose adaptive feature fusion models with trainable feature sele…
In this paper, we propose a novel online self-calibration approach for Light Detection and Ranging (LiDAR) and camera sensors. Compared to the previous CNN-based methods that concatenate the feature maps of the RGB image and decalibrated depth image, we exploit the cost volume inspired by the PWC-Net for feature matching. Besides the smooth L1-Loss of the predicted extrinsic calibration parameters, an additional point cloud loss is applied. Instead of regress the extrinsic parameters between LiDAR and camera directly, we predict the decalibrated deviation from initial calibration to the ground…
University of Central Florida（中佛罗里达大学）；Toyota Motor North America R&D InfoTech Labs（丰田北美研发信息技术实验室）
The recent advancements in communication and computational systems has led to significant improvement of situational awareness in connected and autonomous vehicles. Computationally efficient neural networks and high speed wireless vehicular networks have been some of the main contributors to this improvement. However, scalability and reliability issues caused by inherent limitations of sensory and communication systems are still challenging problems. In this paper, we aim to mitigate the effects of these limitations by introducing the concept of feature sharing for cooperative object detection…
Most sensor setups for onboard autonomous perception are composed of LiDARs and vision systems, as they provide complementary information that improves the reliability of the different algorithms necessary to obtain a robust scene understanding. However, the effective use of information from different sources requires an accurate calibration between the sensors involved, which usually implies a tedious and burdensome process. We present a method to calibrate the extrinsic parameters of any pair of sensors involving LiDARs, monocular or stereo cameras, of the same or different modalities. The p…
The Institute of Industrial Science, The University of Tokyo（东京大学生产技术研究所）；The National Institute of Advanced Industrial Science and Technology (AIST)（日本产业技术综合研究所）
Monocular camera sensors are vital to intelligent vehicle operation and automated driving assistance and are also heavily employed in traffic control infrastructure. Calibrating the monocular camera, though, is time-consuming and often requires significant manual intervention. In this work, we present an extrinsic camera calibration approach that automatizes the parameter estimation by utilizing semantic segmentation information from images and point clouds. Our approach relies on a coarse initial measurement of the camera pose and builds on lidar sensors mounted on a vehicle with high-precisi…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
Targetless LiDAR-Camera Calibration with Neural Gaussian Splatting
Department of Interdisciplinary Program in Artificial Intelligence, Seoul National University（人工智能交叉学科项目系，首尔国立大学）；Department of Artificial Intelligence, Yonsei University（人工智能系，延世大学）
Uncertainty-Aware Online Extrinsic Calibration: A Conformal Prediction Approach
Université de technologie de Compiègne, CNRS, Heudiasyc（法国图卢兹工学院、CNRS、Heudiasyc）；CNRS, INSA Lyon, UCBL, LIRIS, UMR5205（CNRS、里昂国立应用科学学院、UCBL、LIRIS、UMR5205）
