Native-Domain Cross-Attention for Camera-LiDAR Extrinsic Calibration Under Large Initial Perturbations
School of Automation, Beijing Institute of Technology（北京理工大学自动化学院）；School of Integrated Circuits and Electronics, Beijing Institute of Technology（北京理工大学集成电路与电子学院）
Accurate camera-LiDAR fusion relies on precise extrinsic calibration, which fundamentally depends on establishing reliable cross-modal correspondences under potentially large misalignments. Existing learning-based methods typically project LiDAR points into depth maps for feature fusion, which distorts 3D geometry and degrades performance when the extrinsic initialization is far from the ground truth. To address this issue, we propose an extrinsic-aware cross-attention framework that directly aligns image patches and LiDAR point groups in their native domains. The proposed attention mechanism explicitly injects extrinsic parameter hypotheses into the correspondence modeling process, enabling geometry-consistent cross-modal interaction without relying on projected 2D depth maps. Extensive experiments on the KITTI and nuScenes benchmarks demonstrate that our method consistently outperforms state-of-the-art approaches in both accuracy and robustness. Under large extrinsic perturbations, our approach achieves accurate calibration in 88% of KITTI cases and 99% of nuScenes cases, substantially surpassing the second-best baseline. We have open sourced our code on https://github.com/gitouni/ProjFusion to benefit the community.
The Hong Kong University of Science and Technology（香港科技大学）；Huawei Technologies（华为技术有限公司）
Extrinsic perturbation always exists in multiple sensors. In this paper, we focus on the extrinsic uncertainty in multi-LiDAR systems for 3D object detection. We first analyze the influence of extrinsic perturbation on geometric tasks with two basic examples. To minimize the detrimental effect of extrinsic perturbation, we propagate an uncertainty prior on each point of input point clouds, and use this information to boost an approach for 3D geometric tasks. Then we extend our findings to propose a multi-LiDAR 3D object detector called MLOD. MLOD is a two-stage network where the multi-LiDAR in…
As neuromorphic technology is maturing, its application to robotics and autonomous vehicle systems has become an area of active research. In particular, event cameras have emerged as a compelling alternative to frame-based cameras in low-power and latency-demanding applications. To enable event cameras to operate alongside staple sensors like lidar in perception tasks, we propose a direct, temporally-decoupled extrinsic calibration method between event cameras and lidars. The high dynamic range, high temporal resolution, and low-latency operation of event cameras are exploited to directly regi…
Australian Centre for Field Robotics（澳大利亚野外机器人学中心）；University of Sydney（悉尼大学）
This paper proposes an automated method to obtain the extrinsic calibration parameters between a camera and a 3D lidar with as low as 16 beams. We use a checkerboard as a reference to obtain features of interest in both sensor frames. The calibration board centre point and normal vector are automatically extracted from the lidar point cloud by exploiting the geometry of the board. The corresponding features in the camera image are obtained from the camera's extrinsic matrix. We explain the reasons behind selecting these features, and why they are more robust compared to other possibilities. To…
Hong Kong University of Science and Technology（香港科技大学）
Combining multiple LiDARs enables a robot to maximize its perceptual awareness of environments and obtain sufficient measurements, which is promising for simultaneous localization and mapping (SLAM). This paper proposes a system to achieve robust and simultaneous extrinsic calibration, odometry, and mapping for multiple LiDARs. Our approach starts with measurement preprocessing to extract edge and planar features from raw measurements. After a motion and extrinsic initialization procedure, a sliding window-based multi-LiDAR odometry runs onboard to estimate poses with online calibration refine…
YOCO: You Only Calibrate Once for Accurate Extrinsic Parameter in LiDAR-Camera Systems
China University of Mining and Technology (Beijing)（中国矿业大学（北京））；College of Geoscience and Surveying Engineering, China University of Mining and Technology (Beijing)（中国矿业大学（北京）地球科学与测绘工程学院）
The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；Hong Kong University of Science and Technology（香港科技大学）；HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute（香港科技大学深港协同创新研究院）；CWB Institute of Autonomous Driving（CWB自动驾驶研究院）
The combination of LiDARs and cameras enables a mobile robot to perceive environments with multi-modal data, becoming a key factor in achieving robust perception. Traditional frame cameras are sensitive to changing illumination conditions, motivating us to introduce novel event cameras to make LiDAR-camera fusion more complete and robust. However, to jointly exploit these sensors, the challenging extrinsic calibration problem should be addressed. This paper proposes an automatic checkerboard-based approach to calibrate extrinsics between a LiDAR and a frame/event camera, where four contributio…
This paper presents a framework for the targetless extrinsic calibration of stereo cameras and Light Detection and Ranging (LiDAR) sensors with a non-overlapping Field of View (FOV). In order to solve the extrinsic calibrations problem under such challenging configuration, the proposed solution exploits road markings as static and robust features among the various dynamic objects that are present in urban environment. First, this study utilizes road markings that are commonly captured by the two sensor modalities to select informative images for estimating the extrinsic parameters. In order to…
A Target-based Multi-LiDAR Multi-Camera Extrinsic Calibration System
Research \& Development, Toyota Material Handling Manufacturing, Bologna Italy Department of Information Engineering, University of Pisa, Pisa, Italy School of Engineering；Materials Science, Queen Mary University of London, London, United Kingdom
Sensor setups consisting of a combination of 3D range scanner lasers and stereo vision systems are becoming a popular choice for on-board perception systems in vehicles; however, the combined use of both sources of information implies a tedious calibration process. We present a method for extrinsic calibration of lidar-stereo camera pairs without user intervention. Our calibration approach is aimed to cope with the constraints commonly found in automotive setups, such as low-resolution and specific sensor poses. To demonstrate the performance of our method, we also introduce a novel approach f…
Accurate Measurement of 3D and 2D Circular Centers With Application to LiDAR-Camera Extrinsic Calibration
Thrust of Robotics and Autonomous Systems, The Hong Kong University of Science and Technology (Guangzhou)（机器人与自主系统研究所，香港科技大学（广州））；Lower Airspace Economy Research Institute, International Digital Economy Academy, ShenZhen（空域经济研究所，国际数字经济学院）；Horizon-Continental Technology Corporation（Horizon-Continental技术公司）；State Key Laboratory of Rail Traffic Control and Safety and the Beijing Engineering Research Center of EMC and GNSS Technology for Rail Transportation, School of Electronic and Information Engineering, Beijing Jiaotong University（轨道交通控制与安全国家重点实验室，北京交通大学电子信息工程学院，电磁兼容与GNSS技术轨道交通工程研究中心）
This paper presents a novel method for fully automatic and convenient extrinsic calibration of a 3D LiDAR and a panoramic camera with a normally printed chessboard. The proposed method is based on the 3D corner estimation of the chessboard from the sparse point cloud generated by one frame scan of the LiDAR. To estimate the corners, we formulate a full-scale model of the chessboard and fit it to the segmented 3D points of the chessboard. The model is fitted by optimizing the cost function under constraints of correlation between the reflectance intensity of laser and the color of the chessboar…
Karlsruhe Institute of Technology（卡尔斯鲁厄理工学院）；FZI Research Center for Information Technology（FZI信息技术研究中心）
In this paper, we present TEScalib, a novel extrinsic self-calibration approach of LiDAR and stereo camera using the geometric and photometric information of surrounding environments without any calibration targets for automated driving vehicles. Since LiDAR and stereo camera are widely used for sensor data fusion on automated driving vehicles, their extrinsic calibration is highly important. However, most of the LiDAR and stereo camera calibration approaches are mainly target-based and therefore time consuming. Even the newly developed targetless approaches in last years are either inaccurate…
Most sensor setups for onboard autonomous perception are composed of LiDARs and vision systems, as they provide complementary information that improves the reliability of the different algorithms necessary to obtain a robust scene understanding. However, the effective use of information from different sources requires an accurate calibration between the sensors involved, which usually implies a tedious and burdensome process. We present a method to calibrate the extrinsic parameters of any pair of sensors involving LiDARs, monocular or stereo cameras, of the same or different modalities. The p…
Vellore Institute of Technology, Chennai（金奈韦洛尔理工大学）；Birla Institute of Technology and Science, Hyderabad（海得拉巴比尔拉理工学院）；Veermata Jijabai Technological Institute, Mumbai（孟买韦尔马塔·吉贾拜技术学院）；International Institute of Information and Technology, Hyderabad（海得拉巴国际信息技术学院）
With the advent of autonomous vehicles, LiDAR and cameras have become an indispensable combination of sensors. They both provide rich and complementary data which can be used by various algorithms and machine learning to sense and make vital inferences about the surroundings. We propose a novel pipeline and experimental setup to find accurate rigid-body transformation for extrinsically calibrating a LiDAR and a camera. The pipeling uses 3D-3D point correspondences in LiDAR and camera frame and gives a closed form solution. We further show the accuracy of the estimate by fusing point clouds fro…
RAVES-Calib: Robust, Accurate and Versatile Extrinsic Self Calibration Using Optimal Geometric Features
School of Systems Science and Engineering, Sun Yat-Sen University（系统科学与工程学院，中山大学）；Defense Innovation Institute, Chinese Academy of Military Science（国防创新研究院，中国人民解放军军事科学院）；Intelligent Game and Decision Laboratory（智能游戏与决策实验室）；College of Computer Science and Technology, Harbin Engineering University（计算机科学与技术学院，哈尔滨工程大学）
Handong Global University（韩东国际大学）；Virginia Tech（弗吉尼亚理工大学）
This paper presents a novel automatic calibration system to estimate the extrinsic parameters of LiDAR mounted on a mobile platform for sensor misalignment inspection in the large-scale production of highly automated vehicles. To obtain subdegree and subcentimeter accuracy levels of extrinsic calibration, this study proposed a new concept of a target board with embedded photodetector arrays, named the PD-target system, to find the precise position of the correspondence laser beams on the target surface. Furthermore, the proposed system requires only the simple design of the target board at the…
CLRNet: Targetless Extrinsic Calibration for Camera, Lidar and 4D Radar Using Deep Learning
Hungarian Research Network Institute for Computer Science and Control (HUN-REN SZTAKI)（匈牙利研究网络计算机科学与控制研究所）；Pázmány Péter Catholic University（帕兹曼·佩斯特天主教大学）；Intelligent Vehicles Group, TU Delft（智能车辆组，代尔夫特理工大学）；Perciv AI
DST-Calib: A Dual-Path, Self-Supervised, Target-Free LiDAR-Camera Extrinsic Calibration Network
Department of Control Science & Engineering, the College of Electronics & Information Engineering, Tongji University（控制科学与工程系，电子与信息工程学院，同济大学）；Department of Mechanical Engineering, the School of Mechanical Engineering, Tongji University（机械工程系，机械工程学院，同济大学）；School of Robotics, Hunan University（机器人学院，湖南大学）；College of Intelligence Science and Technology, National University of Defense Technology（智能科学与技术学院，国防科学技术大学）；Department of Control Science & Engineering, the College of Electronics & Information Engineering, Shanghai Research Institute for Intelligent Autonomous Systems, the State Key Laboratory of Intelligent Autonomous Systems, and Frontiers Science Center for Intelligent Autonomous Systems, Tongji University（控制科学与工程系，电子与信息工程学院，上海智能自主系统研究院，智能自主系统国家重点实验室，智能自主系统前沿科学中心，同济大学）；National Key Laboratory of Human-Machine Hybrid Augmented Intelligence, Institute of Artificial Intelligence and Robotics, Xi’an Jiaotong University（人机混合增强智能国家重点实验室，人工智能与机器人研究院，西安交通大学）
Iterative Camera-LiDAR Extrinsic Optimization via Surrogate Diffusion
School of Automation, Beijing Institute of Technology（自动化学院，北京理工大学）；Centre for Robotics Research, Department of Engineering, King’s College London（机器人研究中心，工程系，伦敦大学国王学院）；School of Integrated Circuits and Electronics, Beijing Institute of Technology（集成电路与电子学院，北京理工大学）
Department of Control Science & Engineering, the College of Electronic & Information Engineering, Tongji University（控制科学与工程系，电子与信息工程学院，同济大学）；School of Computer Science and Engineering, Central South University（计算机科学与工程学院，中南大学）；Beijing Institute of Aerospace Control Devices（北京航天控制器件研究所）；Institute of Automation, Chinese Academy of Sciences（自动化研究所，中国科学院）
International Institute of Information Technology, Hyderabad（海得拉巴国际信息技术学院）；Mila（米拉研究所）；Université de Montréal（蒙特利尔大学）
3D LiDARs and 2D cameras are increasingly being used alongside each other in sensor rigs for perception tasks. Before these sensors can be used to gather meaningful data, however, their extrinsics (and intrinsics) need to be accurately calibrated, as the performance of the sensor rig is extremely sensitive to these calibration parameters. A vast majority of existing calibration techniques require significant amounts of data and/or calibration targets and human effort, severely impacting their applicability in large-scale production systems. We address this gap with CalibNet: a self-supervised …
Online,Target-Free LiDAR-Camera Extrinsic Calibration via Cross-Modal Mask Matching
Tongji University（同济大学）；College of Electronics & Information Engineering（电子与信息工程学院）；Shanghai Institute of Intelligent Science and Technology（上海智能科学技术研究院）；Shanghai Research Institute for Intelligent Autonomous Systems（上海智能自主系统研究院）；State Key Laboratory of Intelligent Autonomous Systems（智能自主系统国家重点实验室）；Frontiers Science Center for Intelligent Autonomous Systems（智能自主系统前沿科学中心）
For autonomous vehicles, an accurate calibration for LiDAR and camera is a prerequisite for multi-sensor perception systems. However, existing calibration techniques require either a complicated setting with various calibration targets, or an initial calibration provided beforehand, which greatly impedes their applicability in large-scale autonomous vehicle deployment. To tackle these issues, we propose a novel method to calibrate the extrinsic parameter for LiDAR and camera in road scenes. Our method introduces line features from static straight-line-shaped objects such as road lanes and pole…
Institute of Industrial Science, The University of Tokyo（东京大学产业技术研究所）；Microsoft（微软）
In this paper, we propose a method of targetless and automatic Camera-LiDAR calibration. Our approach is an extension of hand-eye calibration framework to 2D-3D calibration. By using the sensor fusion odometry method, the scaled camera motions are calculated with high accuracy. In addition to this, we clarify the suitable motion for this calibration method. The proposed method only requires the three-dimensional point cloud and the camera image and does not need other information such as reflectance of LiDAR and to give initial extrinsic parameter. In the experiments, we demonstrate our method…
In this paper, we propose a novel online self-calibration approach for Light Detection and Ranging (LiDAR) and camera sensors. Compared to the previous CNN-based methods that concatenate the feature maps of the RGB image and decalibrated depth image, we exploit the cost volume inspired by the PWC-Net for feature matching. Besides the smooth L1-Loss of the predicted extrinsic calibration parameters, an additional point cloud loss is applied. Instead of regress the extrinsic parameters between LiDAR and camera directly, we predict the decalibrated deviation from initial calibration to the ground…
The Institute of Industrial Science, The University of Tokyo（东京大学生产技术研究所）；The National Institute of Advanced Industrial Science and Technology (AIST)（日本产业技术综合研究所）
The Hong Kong University of Science and Technology（香港科技大学）
Multiple LiDARs have progressively emerged on autonomous vehicles for rendering a wide field of view and dense measurements. However, the lack of precise calibration negatively affects their potential applications in localization and perception systems. In this paper, we propose a novel system that enables automatic multi-LiDAR calibration without any calibration target, prior environmental information, and initial values of the extrinsic parameters. Our approach starts with a hand-eye calibration for automatic initialization by aligning the estimated motions of each sensor. The resulting para…
Monocular camera sensors are vital to intelligent vehicle operation and automated driving assistance and are also heavily employed in traffic control infrastructure. Calibrating the monocular camera, though, is time-consuming and often requires significant manual intervention. In this work, we present an extrinsic camera calibration approach that automatizes the parameter estimation by utilizing semantic segmentation information from images and point clouds. Our approach relies on a coarse initial measurement of the camera pose and builds on lidar sensors mounted on a vehicle with high-precisi…
Mobile robotic applications need precise information about the geometric position of the individual sensors on the platform. This information is given by the extrinsic calibration parameters which define how the sensor is rotated and translated with respect to a fixed reference coordinate system. Erroneous calibration parameters have a negative impact on typical robotic estimation tasks, e.g. SLAM. In this work we propose a new method for a continuous estimation of the calibration parameters during operation of the robot. The parameter estimation is based on the matching of point clouds which …
National Institute of Advanced Industrial Science and Technology (AIST)（国立先进工业科学技术研究所（产业技术综合研究所））；Kyoto University（京都大学）
This paper presents a novel semantic-based online extrinsic calibration approach, SOIC (so, I see), for Light Detection and Ranging (LiDAR) and camera sensors. Previous online calibration methods usually need prior knowledge of rough initial values for optimization. The proposed approach removes this limitation by converting the initialization problem to a Perspective-n-Point (PnP) problem with the introduction of semantic centroids (SCs). The closed-form solution of this PnP problem has been well researched and can be found with existing PnP methods. Since the semantic centroid of the point c…
Targetless LiDAR-Camera Calibration with Neural Gaussian Splatting
Department of Interdisciplinary Program in Artificial Intelligence, Seoul National University（人工智能交叉学科项目系，首尔国立大学）；Department of Artificial Intelligence, Yonsei University（人工智能系，延世大学）
We introduce a simple yet effective fusion method of LiDAR and RGB data to segment LiDAR point clouds. Utilizing the dense native range representation of a LiDAR sensor and the setup calibration, we establish point correspondences between the two input modalities. Subsequently, we are able to warp and fuse the features from one domain into the other. Therefore, we can jointly exploit information from both data sources within one single network. To show the merit of our method, we extend SqueezeSeg, a point cloud segmentation network, with an RGB feature branch and fuse it into the original str…
Uncertainty-Aware Online Extrinsic Calibration: A Conformal Prediction Approach
Université de technologie de Compiègne, CNRS, Heudiasyc（法国图卢兹工学院、CNRS、Heudiasyc）；CNRS, INSA Lyon, UCBL, LIRIS, UMR5205（CNRS、里昂国立应用科学学院、UCBL、LIRIS、UMR5205）
The use of infrastructure sensor technology for traffic detection has already been proven several times. However, extrinsic sensor calibration is still a challenge for the operator. While previous approaches are unable to calibrate the sensors without the use of reference objects in the sensor field of view (FOV), we present an algorithm that is completely detached from external assistance and runs fully automatically. Our method focuses on the high-precision fusion of LiDAR point clouds and is evaluated in simulation as well as on real measurements. We set the LiDARs in a continuous pendulum …
Sensor calibration, which can be intrinsic or extrinsic, is an essential step to achieve the measurement accuracy required for modern perception and navigation systems deployed on autonomous robots. To date, intrinsic calibration models for spinning LiDARs have been based on hypothesized based on their physical mechanisms, resulting in anywhere from three to ten parameters to be estimated from data, while no phenomenological models have yet been proposed for solid-state LiDARs. Instead of going down that road, we propose to abstract away from the physics of a LiDAR type (spinning vs solid-stat…
LiDAR-VGGT: Cross-Modal Coarse-to-Fine Fusion for Globally Consistent and Metric-Scale Dense Mapping
State Key Laboratory of Industrial Control Technology, Institute of Cyber-Systems and Control, Zhejiang University（工业控制技术国家重点实验室，系统与控制研究院，浙江大学）；Differential Robot Technology Co., Ltd.（差分机器人技术有限公司）；College of Intelligence Science and Technology, National University of Defense Technology（智能科学与技术学院，国防科技大学）
Texas A&M University（德克萨斯A&M大学）；DEVCOM Army Research Laboratory (ARL)（DEVCOM陆军研究实验室）
We propose an algorithm for automatic, targetless, extrinsic calibration of a LiDAR and camera system using semantic information. We achieve this goal by maximizing mutual information (MI) of semantic information between sensors, leveraging a neural network to estimate semantic mutual information, and matrix exponential for calibration computation. Using kernel-based sampling to sample data from camera measurement based on LiDAR projected points, we formulate the problem as a novel differentiable objective function which supports the use of gradient-based optimization methods. We also introduc…
