Strain engineering has been a ubiquitous paradigm to tailor the electronic band structure and harness the associated new or enhanced fundamental properties in semiconductors. In this regard, semiconductor membranes emerged as a versatile class of nanoscale materials to control lattice strain and engineer complex heterostructures leading to the development of a variety of innovative applications. Herein we exploit this quasi-two-dimensional platform to tune simultaneously the lattice parameter and bandgap energy in group IV GeSn semiconductor alloys. As Sn content is increased to reach a direct band gap, these semiconductors become metastable and typically compressively strained. We show that the release and transfer of GeSn membranes lead to a significant relaxation thus extending the absorption wavelength range deeper in the mid-infrared. Fully released Ge$_{0.83}$Sn$_{0.17}$ membranes were integrated on silicon and used in the fabrication of broadband photodetectors operating at room temperature with a record wavelength cutoff of 4.6 $μ$m, without compromising the performance at shorter wavelengths down to 2.3 $μ$m. These membrane devices are characterized by two orders of magnitude reduction in dark current as compared to devices processed from as-grown strained epitaxial layers. The latter exhibit a content-dependent, shorter wavelength cutoff in the 2.6-3.5 $μ$m range, thus highlighting the role of lattice strain relaxation in shaping the spectral response of membrane photodetectors. This ability to engineer all-group IV transferable mid-infrared photodetectors lays the groundwork to implement scalable and flexible sensing and imaging technologies exploiting these integrative, silicon-compatible strained-relaxed GeSn membranes.
Two-dimensional (2D) materials, such as graphene, transition metal dichalcogenides (TMDs), black phosphorus (BP) and related derivatives, have attracted great attention due to their advantages of flexibility, strong light-matter interaction, broadband absorption and high carrier mobility, and have become a powerful contender for next-generation infrared photodetectors. However, since the thickness of two-dimensional materials is on the order of nanometers, the absorption of two-dimensional materials is very weak, which limits the detection performance of 2D materials-based infrared photodetect…
High speed mid-wave infrared (MWIR) photodetectors have important applications in the emerging areas such high-precision frequency comb spectroscopy and light detection and ranging (LIDAR). In this work, we report a high-speed room-temperature mid-wave infrared interband cascade photodetector (ICIP) based on a type-II InAs/GaSb superlattice. The devices show an optical cut-off wavelength around 5um and a 3-dB bandwidth up to 7.04 GHz. The relatively low dark current density around 9.39 x 10-2 A/cm2 under -0.1 V is also demonstrated at 300 K. These results validate the advantages of ICIPs to ac…
Broadband infrared photodetectors have profound importance in diverse applications including security, gas sensing, bioimaging, spectroscopy for food quality, and recycling, just to name a few. Yet, these applications can currently be served by expensive epitaxially grown photodetectors, limiting their market potential and social impact. The use of colloidal quantum dots (CQDs) and 2D-materials in a hybrid layout is an attractive alternative to design low-cost CMOS-compatible infrared photodetectors. However, the spectral sensitivity of these conventional hybrid detectors has been restricted t…
We appraise a waveguide-integrated plasmonic graphene photodetector based on the hot carrier photo-bolometric effect, with performance characterized simultaneously by high responsivity, on the scale of hundreds of AW-1, and high speed on the scale of 100s of GHz. Performance evaluation is based on a theory of bolometric effect originating from the band nonparabolicity of graphene. Results compare favorably with the state-of-the-art plasmonic bolometric photodetectors, predicting up to two orders of magnitude increase in a responsivity while keeping speed on the same level, defined by the elect…
Si-based photodetectors satisfy the criteria of low-cost and environmental-friendly, and can enable the development of on-chip complementary metal-oxide-semiconductor (CMOS)-compatible photonic systems. However, extending their room-temperature photoresponse into the mid-wavelength infrared (MWIR) regime remains challenging due to the intrinsic bandgap of Si. Here, we report on a comprehensive study of a room-temperature MWIR photodetector based on Si hyperdoped with Te. The demonstrated MWIR p-n photodiode exhibits a spectral photoresponse up to 5 μm and a slightly lower detector performance …
Highly sensitive photodetectors with single photon level detection is one of the key components to a range of emerging technologies, in particular the ever-growing field of optical communication, remote sensing, and quantum computing. Currently, most of the single-photon detection technologies require external biasing at high voltages and/or cooling to low temperatures, posing great limitations for wider applications. Here, we demonstrate InP nanowire array photodetectors that can achieve single-photon level light detection at room temperature without an external bias. We use top-down etched, …
III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As multi-quantum-well heterostructure to demonstrate heterodyne detection at 10um wavelength with a nearly flat frequency response up to 70GHz at room temperature, solely limited by the measurement system bandwidth. This is the broadest RF-bandwidth reported to date for a quantum-well mid-infrared photodetector. Responsivities of 0.15A/W and 1.5A/W are obtained at 300K and 77K…
Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-bas…
We demonstrate a low noise short wavelength infrared (SWIR) Sb based type II superlattice (T2SL) avalanche photodiodes (APD). The SWIR GaSb/(AlAsSb/GaSb) APD structure was designed based on impact ionization engineering and grown by molecular beam epitaxy on GaSb substrate. At room temperature, the device exhibits a 50 % cut-off wavelength of 1.74 micron. The device revealed to have electron dominated avalanching mechanism with a gain value of 48 at room temperature. The electron and hole impact ionization coefficients were calculated and compared to give better prospect of the performance of …
High-temperature operation of metal-semiconductor-metal (MSM) UV photodetectors fabricated on pulsed laser deposited \b{eta}-Ga2O3 thin films has been investigated. These photodetectors were operated up to 250 °C temperature under 255 nm illumination. The photo current to dark current (PDCR) ratio of about 7100 was observed at room temperature (RT) while it had a value 2.3 at 250 °C at 10 V applied bias. A decline in photocurrent was observed from RT to 150 °C and then it increased with temperature up to 250 °C. The suppression of the blue band was also observed from 150 °C temperature which i…
A long-wavelength infrared (IR) photodetector based on two-dimensional materials working at room temperature would have wide applications in many aspects in remote sensing, thermal imaging, biomedical optics, and medical imaging. However, sub-bandgap light detection in graphene and black phosphorus has been a long-standing scientific challenge because of low photoresponsivity, instability in the air and highdark current. In this study, we report a highly sensitive, air-stable and operable long-wavelength infrared photodetector at room temperature based on PdSe2 phototransistors and its heteros…
Recent development on Ge$_{1-x}$Sn$_x$ nanowires with high Sn content, beyond its solid solubility limit, make them attractive for all group-IV Si-integrated infrared photonics at nanoscale. Herein, we report a chemical vapour deposition-grown high Sn-content Ge-Ge$_{0.92}$Sn$_{0.08}$ core-shell based single nanowire photodetector operating at the optical communication wavelength of 1.55 $μ$m. The atomic concentration of Sn in nanowires has been studied using X-ray photoelectron and Raman spectroscopy data. A metal-semiconductor-metal based single nanowire photodetector, fabricated via electro…
Graphene has recently been shown to be permeable to thermal protons, the nuclei of hydrogen atoms, which sparked interest in its use as a proton-conducting membrane in relevant technologies. However, the influence of light on proton permeation remains unknown. Here we report that proton transport through Pt-nanoparticle-decorated graphene can be enhanced strongly by illuminating it with visible light. Using electrical measurements and mass spectrometry, we find a photoresponsivity of 10^4 A W-1, which translates into a gain of 10^4 protons per photon with response times in the microsecond rang…
This paper presents the design, the fabrication and the characterization of Schottky graphene/silicon photodetectors, operating at both 2 micron and room temperature. The graphene/silicon junction has been carefully: characterized device shows a non ideal behaviour with the increasing temperature and the interfacial trap density has been measured as 1.1x10^14 eV^-1cm^-2. Photodetectors are characterized by an internal (external) responsivity of 10.3 mA/W (0.16 mA/W) in an excellent agreement with the theory. Our devices pave the way for developing hybrid graphene-Si free-space illuminated PDs …
Free-space circularly polarized light (CPL) detection, requiring polarizers and waveplates, has been well established, while such spatial degree of freedom is unfortunately absent in integrated on-chip optoelectronics. So far, those reported filterless CPL photodetectors suffer from the intrinsic small discrimination ratio, vulnerability to the non-CPL field components, and low responsivity. Here, we report a distinct paradigm of geometric photodetectors in mid-infrared exhibiting colossal discrimination ratio, close-to-perfect CPL-specific response, a zero-bias responsivity of 392 V/W at room…
Diamond heat-spreaders for gallium nitride (GaN) devices currently depend upon a robust wafer bonding process. Bonding-free membrane methods demonstrate potential, however, chemical vapour deposition (CVD) of diamond directly onto a III-nitride (III-N) heterostructure membrane induces significant thermal stresses. In this work, these thermal stresses are investigated using an analytical approach, a numerical model and experimental validation. The thermal stresses are caused by the mismatch in the coefficient of thermal expansion (CTE) between the GaN/III-N stack, silicon (Si) and the diamond f…
The availability of high-frequency pulsed emitters in the $2-2.5\,μ$m wavelength range paved the way for a wealth of new applications in ultrafast spectroscopy, free-space and fiber-optical communications, surveillance and recognition, artificial intelligence, and medical imaging. However, developing these emerging technologies and their large-scale use depend on the availability of high-speed, low-noise, and cost-effective photodetectors. With this perspective, here we demonstrate GeSn photodiodes grown on silicon wafers featuring a high broadband operation covering the extended-SWIR range wi…
Mechanical displacement in commonly used piezoelectric materials is typically restricted to linear or biaxial in nature and to a few percent of the material dimensions. Here, we show that free-standing BaTiO$_3$ membranes exhibit non-conventional electromechanical coupling. Under an external electric field, these superelastic membranes undergo controllable and reversible 'sushi-rolling-like' 180$^\circ$ folding-unfolding cycles. This crease-free folding is mediated by charged ferroelectric domains, leading to a giant > 3.8 and 4.6 $μ$m displacements for a 30-nm thick membrane at room temperatu…
Fast, room temperature imaging at THz and sub-THz frequencies is an interesting feature which could unleash the full potential of plenty applications in security, healthcare and industrial production. In this Letter we introduce micromechanical bolometers based on silicon nitride trampoline membranes as broad-range detectors, down to the sub-THz frequencies. They show, at the largest wavelengths, room-temperature noise-equivalent-powers comparable to state-of-the-art commercial devices (~100 pW Hz-1/2); adding the good operation speed and the easy, large-scale fabrication process, the trampoli…
We demonstrate feedback cooling of a millimeter-scale, 40 kHz SiN membrane from room temperature to 5 mK (3000 phonons) using a Michelson interferometer, and discuss the challenges to ground state cooling without an optical cavity. This advance appears within reach of current membrane technology, positioning it as a compelling alternative to levitated systems for quantum sensing and fundamental weak force measurements.
A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear response up to very high optical power, an essential feature for heterodyne detection. By an accurate passive stabilization of the local oscillator and minimizing the optical feed-back the system reaches, a…
Optomechanical SiN nano-oscillators in high-finesse Fabry-Perot cavities can be used to investigate the interaction between mechanical and optical degree of freedom for ultra-sensitive metrology and fundamental quantum mechanical studies. In this work we present a nano-oscillator made of a high-stress round-shaped SiN membrane with an integrated on-chip 3D seismic filter properly designed to reduce mechanical losses. This oscillator works in the 200 kHz - 5 MHz range and features a mechanical quality factor of $Q\simeq10^7$ and a Q-frequency product in excess of $6.2 \times 10^{12}$ Hz at room…
Uncooled Terahertz (THz) photodetectors (PDs) showing fast (ps) response and high sensitivity (noise equivalent power (NEP) < $nWHz^{-1/2}$) over a broad (0.5THz-10THz) frequency range are needed for applications in high-resolution spectroscopy (relative accuracy ~ $10^{-11}$), metrology, quantum information, security, imaging, optical communications. However, present THz receivers cannot provide the required balance between sensitivity, speed, operation temperature and frequency range. Here, we demonstrate an uncooled THz PD combining the low (~2000 $k_{B}μm^{-2}$) electronic specific heat of…
Feedback-based control techniques are useful tools in precision measurements as they allow to actively shape the mechanical response of high quality factor oscillators used in force detection measurements. In this paper we implement a feedback technique on a high-stress low-loss SiN membrane resonator, exploiting the charges trapped on the dielectric membrane. A properly delayed feedback force (dissipative feedback) enables the narrowing of the thermomechanical displacement variance in a similar manner to the cooling of the normal mechanical mode down to an effective temperature Te f f . In th…
Incorporating multifunctionality along with the spin-related phenomenon in a single device is of great interest for the development of next generation spintronic devices. One of these challenges is to couple the photo-response of the device together with its magneto-response to exploit the multifunctional operation at room temperature. Here, the multifunctional operation of a single layer p-type molecular spin valve is presented, where the device shows a photovoltaic effect at the room temperature on a transparent glass substrate. The generated photovoltage is almost three times larger than th…
Wearing comfort of apparel is highly dependent on moisture management and respective transport properties of the textiles. In today's used textiles, the water vapor transmission (WVT) depends primarily on the porosity and the wettability of the clothing layer next to the skin and is not adapting or responsive on environmental conditions. The WVT is inevitably the same from both sides of the membrane. In this study, we propose a novel approach by development of a thermoresponsive Janus membrane using electrospinning procedures. We, therefore, targeted a membrane as a bilayer composite structure…
Recently we have reported the direct observation of two-dimensional (2D) Ca-Cl crystals on reduced graphene oxide (rGO) membranes, in which the calcium ions are only about monovalent (i.e. ~+1) and metallic rather than insulating properties are displayed by those CaCl crystals. Here, we report the experimental observation and demonstration of the formation of graphene-Ca-Cl heterojunction owing to the metallicity of 2D Ca-Cl crystals, unexpected piezoelectric effect, room-temperature ferromagnetism, as well as the distinct hydrogen storage and release capability of the Ca-Cl crystals in rGO me…
