III-V semiconductor mid-infrared photodetectors based on intersubband transitions hold a great potential for ultra-high-speed operation up to several hundreds of GHz. In this work we exploit a ~350nm-thick GaAs/Al0.2Ga0.8As multi-quantum-well heterostructure to demonstrate heterodyne detection at 10um wavelength with a nearly flat frequency response up to 70GHz at room temperature, solely limited by the measurement system bandwidth. This is the broadest RF-bandwidth reported to date for a quantum-well mid-infrared photodetector. Responsivities of 0.15A/W and 1.5A/W are obtained at 300K and 77K respectively. To allow ultrafast operation and illumination at normal incidence, the detector consists of a 50Ohm coplanar waveguide, monolithically integrated with a 2D-array of sub-wavelength antennas, electrically interconnected by suspended wires. With this device architecture we obtain a parasitic capacitance of ~30fF, corresponding to the static capacitance of the antennas, yielding a RC-limited 3dB cutoff frequency >150GHz at 300K, extracted with a small-signal equivalent circuit model. Using this model, we quantitively reproduce the detector frequency response and find intrinsic roll-off time constants as low as 1ps at room temperature.
The future interconnect links in intra- and inter-chip require the photodetector with high bandwidth, ultra-wide waveband, compact footprint, low-cost, and compatible integration process with silicon complementary metal-oxide-semiconductor (CMOS) technology. Here, we demonstrate a CMOS-compatible carbon nanotube (CNT) photodetector that exhibits high responsivity, high bandwidth and broad spectral operation over all optical telecommunication band based on high-purity CNT arrays. The ultrafast CNT photodetector demonstrates the 100 Gbit/s Nyquist-shaped on-off-keying (OOK) signal transmission, …
A fast silicon-graphene hybrid plasmonic waveguide photodetectors beyond 1.55 μm is proposed and realized by introducing an ultra-thin wide silicon-on-insulator ridge core region with a narrow metal cap. With this novel design, the light absorption in graphene is enhanced while the metal absorption loss is reduced simultaneously, which helps greatly improve the responsivity as well as shorten the absorption region for achieving fast responses. Furthermore, metal-graphene-metal sandwiched electrodes are introduced to reduce the metal-graphene contact resistance, which is also helpful for improv…
Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-bas…
Visible and near-infrared spectrum photonic integrated circuits are quickly becoming a key technology to address the scaling challenges in quantum information and biosensing. Thus far, integrated photonic platforms in this spectral range have lacked integrated photodetectors. Here, we report the first silicon nitride-on-silicon waveguide photodetectors that are monolithically integrated in a visible light photonic platform on silicon. Owing to a leaky-wave silicon nitride-on-silicon design, the devices achieved a high external quantum efficiency of > 60% across a record wavelength span from $λ…
We appraise a waveguide-integrated plasmonic graphene photodetector based on the hot carrier photo-bolometric effect, with performance characterized simultaneously by high responsivity, on the scale of hundreds of AW-1, and high speed on the scale of 100s of GHz. Performance evaluation is based on a theory of bolometric effect originating from the band nonparabolicity of graphene. Results compare favorably with the state-of-the-art plasmonic bolometric photodetectors, predicting up to two orders of magnitude increase in a responsivity while keeping speed on the same level, defined by the elect…
High speed mid-wave infrared (MWIR) photodetectors have applications in the areas such as free space optical communication and frequency comb spectroscopy. However, most of the research on the MWIR photodetectors is focused on how to increase the quantum efficiency and reduce the dark current, in order to improve the detectivity (D*), and the 3dB bandwidth performance of the corresponding MWIR photodetectors is still not fully studied. In this work, we report and characterize a MWIR interband cascade photodetector based on InAs/GaSb type-II superlattice with a 50% cutoff wavelength at ~5.3 um …
Graphene has shown great potentials for high-speed photodetection. Yet, the responsivities of graphene-based high-speed photodetectors are commonly limited by the weak effective absorption of atomically thin graphene. Here, we propose and experimentally demonstrate a plasmonically enhanced waveguide-integrated graphene photodetector. The device which combines a 6 micron long layer of graphene with field-enhancing nano-sized metallic structures, demonstrates a high external responsivity of 0.5 A/W and a fast photoresponse way beyond 110 GHz. The high efficiency and fast response of the device e…
Integrated photodetectors are essential components of scalable photonics platforms for quantum and classical applications. However, most efforts in the development of such devices to date have been focused on infrared telecommunications wavelengths. Here, we report the first monolithically integrated avalanche photodetector (APD) for visible light. Our devices are based on a doped silicon rib waveguide with a novel end-fire input coupling to a silicon nitride waveguide. We demonstrate a high gain-bandwidth product of 216 $\pm$ 12 GHz at 20 V reverse bias measured for 685 nm input light, with a…
Thin-film lithium niobate on insulator (LNOI) is a promising platform for optical communications, microwave photonics, and quantum technologies. While many high-performance devices like electro-optic modulators and frequency comb sources have been achieved on LNOI platform, it remains challenging to realize photodetectors (PDs) on LNOI platform using simple and low-cost fabrication techniques. Two-dimensional (2D) materials are excellent candidates to achieve photodetection since they feature strong light-matter interaction, excellent mechanical flexibility, and potential large-scale complemen…
High speed mid-wave infrared (MWIR) photodetectors have important applications in the emerging areas such high-precision frequency comb spectroscopy and light detection and ranging (LIDAR). In this work, we report a high-speed room-temperature mid-wave infrared interband cascade photodetector (ICIP) based on a type-II InAs/GaSb superlattice. The devices show an optical cut-off wavelength around 5um and a 3-dB bandwidth up to 7.04 GHz. The relatively low dark current density around 9.39 x 10-2 A/cm2 under -0.1 V is also demonstrated at 300 K. These results validate the advantages of ICIPs to ac…
The availability of high-frequency pulsed emitters in the $2-2.5\,μ$m wavelength range paved the way for a wealth of new applications in ultrafast spectroscopy, free-space and fiber-optical communications, surveillance and recognition, artificial intelligence, and medical imaging. However, developing these emerging technologies and their large-scale use depend on the availability of high-speed, low-noise, and cost-effective photodetectors. With this perspective, here we demonstrate GeSn photodiodes grown on silicon wafers featuring a high broadband operation covering the extended-SWIR range wi…
Ultrafast and sensitive (noise equivalent power <1 nWHz-1/2) light-detection in the Terahertz (THz) frequency range (0.1-10 THz) and at room-temperature is key for applications such as time-resolved THz spectroscopy of gases, complex molecules and cold samples, imaging, metrology, ultra-high-speed data communications, coherent control of quantum systems, quantum optics and for capturing snapshots of ultrafast dynamics, in materials and devices, at the nanoscale. Here, we report room-temperature THz nano-receivers exploiting antenna-coupled graphene field effect transistors integrated with lith…
Growth of Highly Conductive PtSe2 Films Controlled by Raman Metrics for High-Frequency Photodetectors and Optoelectronic Mixers at 1.55 μm
Thales Research & Technology（泰雷兹研究与技术）；Laboratoire de Physique de l'École Normale Supérieure（巴黎高等师范学校物理实验室）；CEA Grenoble（法国原子能和替代能源委员会格勒诺布尔中心）；Center for Nanoscience and Nanotechnology（纳米科学与技术中心）；Ecole Polytechnique（巴黎综合理工学院）
Photodetectors based on nano-structured superconducting thin films are currently some of the most sensitive quantum sensors and are key enabling technologies in such broad areas as quantum information, quantum computation and radio-astronomy. However, their broader use is held back by the low operation temperatures which require expensive cryostats. Here, we demonstrate a nitrogen cooled superconducting transition edge sensor, which shows orders of magnitude improved performance characteristics of any superconducting detector operated above 77K, with a responsivity of 9.61x10^4 V/W, noise equi…
Current optical communication system operating at 1.55 μm wavelength band may not be able to continually satisfy the growing demand on the data capacity within the next few years. Opening a new spectral window at around 2 μm wavelength with recently developed hollow-core photonic band gap fiber and thulium-doped fiber amplifier is a promising solution to increase the transmission capacity due to the low loss and wide bandwidth properties of these components at this wavelength. However, as a key component, the already demonstrated high speed photodetectors at 2 μm wavelength are still not compa…
Terahertz (THz) and sub-THz frequency emitter and detector technologies are receiving increasing attention, underpinned by emerging applications in ultra-fast THz physics, frequency-combs technology and pulsed laser development in this relatively unexplored region of the electromagnetic spectrum. In particular, semiconductor-based ultrafast THz receivers are required for compact, ultrafast spectroscopy and communication systems, and to date, quantum well infrared photodetectors (QWIPs) have proved to be an excellent technology to address this given their intrinsic ps-range response However, wi…
The development of compact and fieldable mid-infrared (mid-IR) spectroscopy devices represents a critical challenge for distributed sensing with applications from gas leak detection to environmental monitoring. Recent work has focused on mid-IR photonic integrated circuit (PIC) sensing platforms and waveguide-integrated mid-IR light sources and detectors based on semiconductors such as PbTe, black phosphorus and tellurene. However, material bandgaps and reliance on SiO$_2$ substrates limit operation to wavelengths $λ\lesssim4\,μ\textrm{m}$. Here we overcome these challenges with a chalcogenide…
