Monolayer group-IV monochalcogenides (MX, M = Ge, Sn, Pb; X = S, Se, Te) are a family of novel two-dimensional (2D) materials that have atomic structures closely related to that of the staggered black phosphorus lattice. The structure of most monolayer MX materials exhibits a broken inversion symmetry, and many of them exhibit ferroelectricity with a reversible in-plane electric polarization. A further consequence of the noncentrosymmetric structure is that when coupled with strong spin-orbit coupling, many MX materials are promising for the future applications in non-linear optics, photovoltaics, spintronics and valleytronics. Nevertheless, because of the relatively large exfoliation energy, the creation of monolayer MX materials is not easy, which hinders the integration of these materials into the fast-developing field of 2D material heterostructures. In this Perspective, we review recent developments in experimental routes to the creation of monolayer MX, including molecular beam epitaxy and two-step etching methods. Other approaches that could be used to prepare monolayer MX are also discussed, such as liquid phase exfoliation and solution phase synthesis. A quantitative comparison between these different methods is also presented.
The electronic structure of (group-III) metal-monochalcogenide monolayers exhibits many unusual features. Some, such as the unusually distorted upper valence band dispersion we describe as a 'caldera', are primarily the result of purely orbital interactions. Others, including spin splitting and wavefunction spin-mixing, are directly driven by spin-orbit coupling. We employ elementary group theory to explain the origins of these properties, and use a tight-binding model to calculate the phenomena enabled by them, such as band-edge carrier effective g-factors, optical absorption spectrum, conduc…
Twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure--belonging to symmetry group P3m1--and an out-of-plane intrinsic electric polarization are shown to be metastable by three independendent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2$_1$ (or Pmmn for PbS, PbSe, and PbTe) phase to estimate {\em energy barriers} $E_B$ that must be overcome during such structural transfor…
We predict enormous piezoelectric effects in intrinsic monolayer group IV monochalcogenides (MX, M=Sn or Ge, X=Se or S), including SnSe, SnS, GeSe and GeS. Using first-principle simulations based on the modern theory of polarization, we find that their characteristic piezoelectric coefficients are about two orders of magnitude larger than those of other 2D materials, such as MoS2 and GaSe, and bulk quartz and AlN which are widely used in industry. This enhancement is a result of the unique "puckered" C2v symmetry and weaker chemical bonds of monolayer group IV monochalcogenides. Given the achi…
Group-IV monochalcogenides are a family of two-dimensional puckered materials with an orthorhombic structure that is comprised of polar layers. In this article, we use first principles calculations to show the multistability of monolayer SnS and GeSe, two prototype materials where the direction of the puckering can be switched by application of tensile stress or electric field. Furthermore, the two inequivalent valleys in momentum space, which are dictated by the puckering orientation, can be excited selectively using linearly polarized light, and this provides an additional tool to identify t…
In this paper, spin properties of monolayer MX (M=Ga, In and X=S, Se, Te) in the presence of strain are studied. Density functional theory is used to investigate spin properties. The strain changes modification of bandgap due to spin-orbit coupling, the results indicate the spin-orbit coupling has a higher effect in the compressive regime. Also, spin splitting in the conduction and valence bands respect to strain are compared for six materials. The location of conduction band minimum (CBM) imposed a type of spin properties. These materials with mirror symmetry can display the Rashba effect whi…
Monolayer group-III monochalcogenides (MX, M = Ga, In; X = S, Se, Te), an emerging category of two-dimensional (2D) semiconductors, hold great promise for electronics, optoelectronics and catalysts. By first-principles calculations, we show that the phonon dispersion and Raman spectra as well as the electronic and topological properties of monolayer MX can be tuned by oxygen functionalization. Chemisorption of oxygen atoms on one side or both sides of the MX sheet narrows or even closes the band gap, enlarges work function, and significantly reduces the carrier effective mass. More excitingly,…
Ferroelectricity usually fades away when materials are thinned down below a critical value. Employing the first-principles density functional theory and modern theory of polarization, we show that the unique ionic-potential anharmonicity can induce spontaneous in-plane electrical polarizations and ferroelectricity in monolayer group-IV monochalcogenides MX (M=Ge, Sn; X=S, Se). Using Monte Carlo simulations with an effective Hamiltonian extracted from the parameterized energy space, we show these materials exhibit a two-dimensional ferroelectric phase transition that is described by fourth-orde…
We survey the state-of-the-art knowledge of ferroelectric and ferroelastic group-IV monochalcogenide monolayers. These semiconductors feature remarkable structural and mechanical properties, such as a switchable in-plane spontaneous polarization, soft elastic constants, structural degeneracies, and thermally-driven two-dimensional structural transformations. Additionally, these 2D materials also display selective valley excitations, valley Hall effects, and persistent spin helix behavior. After a description of their Raman spectra, a discussion of optical properties arising from their lack of …
We find that several layer-phase group-III monochalcogenides, including GaS, GaSe and InSe, are piezoelectric in the monolayer form. First-principles calculations reveal that the piezoelectric coefficients of monolayer GaS, GaSe and InSe are on the same order of magnitude as the earlier discovered two-dimensional piezoelectric materials, such as BN and MoS2 monolayers. Our study expands the family of two dimensional piezoelectric materials, suggesting that strong piezoelectric response can occur in a wide range of two dimensional materials with broken inversion symmetry. The co-existence of pi…
Topological semimetals in ferromagnetic materials have attracted enormous attention due to the potential applications in spintronics. Using the first-principles density functional theory together with an effective lattice model, here we present a new family of topological semimetals with a fully spin-polarized nodal loop in alkaline-metal monochalcogenide $MX$ ($M$ = Li, Na, K, Rb, Cs; $X$ = S, Se, Te) monolayers. The half-metallic ferromagnetism can be established in $MX$ monolayers, in which one nodal loop formed by two crossing bands with the same spin components is found at the Fermi energ…
Structural degeneracies underpin the ferroic behavior of next-generation two-dimensional materials, and lead to peculiar two-dimensional structural transformations under external fields, charge doping and/or temperature. The most direct indicator of the ease of these transformations is an {\em elastic energy barrier}, defined as the energy difference between the (degenerate) structural ground state unit cell, and a unit cell with an increased structural symmetry. Proximity of a two-dimensional material to a bulk substrate can affect the magnitude of the critical fields and/or temperature at wh…
2D Ferroelectric materials are promising for designing low-dimensional memory devices. Here, we explore strain tunable ferroelectric properties of group-IV monochalcogenides MX (M=Ge, Sn; X=S, Se) and their potential application in lateral field tunnel junction devices. We find that these monolayers have in-plane ferroelectricity, with their ferroelectric parameters being on par with other known 2D ferroelectric materials. Amongst SnSe, SnS, GeSe, and GeS, we find that GeS has the best ferroelectric parameters for device applications, which can be improved further by applying uniaxial tensile …
The discovery of archetypal two-dimensional (2D) materials provides enormous opportunities in both fundamental breakthroughs and device applications, as evident by the research booming in graphene, atomically thin transition-metal chalcogenides, and few-layer black phosphorous in the past decade. Here, we report a new, large family of semiconducting dialkali-metal monochalcogenides (DMMCs) with an inherent A$_{2}$X monolayer structure, in which two alkali sub-monolayers form hexagonal close packing and sandwich the triangular chalcogen atomic plane. Such unique lattice structure leads to extra…
We study the injection current response tensor (also known as circular photogalvanic effect or ballistic current) in ferrolectric monolayer GeS, GeSe, SnS, and SnSe. We find that the injection current is perpendicular to the spontaneous in-plane polarization and could reach peak (bulk) values of the order of $10^{10}$A/V$^{2}$s in the visible spectrum. The magnitude of the injection current is the largest reported in the literature to date for a two dimensional material. To rationalize the large injection current, we correlate the injection current spectrum with the joint density of states, el…
We calculate transversal flexoelectric coefficients along the principal directions for fifty select atomic monolayers using ab initio Density Functional Theory (DFT). Specifically, considering representative materials from each of Groups IV, III-V, V monolayers, transition metal dichalcogenides (TMDs), Group III monochalcogenides, Group IV monochalcogenides, transition metal trichalcogenides (TMTs), and Group V chalcogenides, we perform symmetry-adapted DFT simulations to calculate the flexoelectric coefficients at practically relevant bending curvatures. We find that the materials demonstrate…
Using density functional theory, we explore the possibility of two monolayer monochalcogenides, namely, MoS and WS (buckled and puckered). Our results on cohesive energy and phonon dispersion predict that the buckled structures of both MoS and WS are stable. On the other hand, while the puckered structure of WS clearly shows a dynamical instability, the same for MoS may have a stable configuration. Charge analyses predict ionic-like bonding in these systems. Density of states and band structure reveal a non-magnetic metallic nature for MoS in the stable configurations. However, for the buckled…
We calculate bending moduli along the principal directions for thirty-two select atomic monolayers using ab initio Density Functional Theory (DFT). Specifically, considering representative materials from each of Groups IV, V, III-V monolayers, transition metal dichalcogenides, Group III monochalcogenides, Group IV monochalcogenides, and transition metal trichalcogenides, we utilize the recently developed Cyclic DFT method to calculate the bending moduli in the practically relevant but previously intractable low-curvature limit. We find that the moduli generally increase with thickness of the m…
GeSe and SnSe monochalcogenide monolayers and bilayers undergo a two-dimensional phase transition from a rectangular unit cell to a square unit cell at a temperature $T_c$ well below the melting point. Its consequences on material properties are studied within the framework of Car-Parrinello molecular dynamics and density-functional theory. No in-gap states develop as the structural transition takes place, so that these phase-change materials remain semiconducting below and above $T_c$. As the in-plane lattice transforms from a rectangle onto a square at $T_c$, the electronic, spin, optical, a…
The correlated Kondo insulator state of the plutonium monochalcogenides is investigated using the dynamical mean field theory (DMFT) and the local density approximation +U (LDA+U). The DMFT-dynamical fluctuations lead to a correlated insulator state at elevated temperature, in sharp contrast to the static LDA+U approach that fails to reproduce both the insulating behavior and anomalous lattice constant. The DMFT conversely predicts the experimentally observed anomalous increase of the gap with pressure and explains the lattice constant very well.
Bandedge states in the indirect-gap group-IV metal monochalcogenide monolayers ('four-six-enes' such as SnS, GeTe, etc.) inherit the properties of nearby reciprocal space points of high symmetry at the Brillouin zone edge. We employ group theory and the method of invariants to capture these essential symmetries in effective Hamiltonians including spin-orbit coupling, and use perturbation theory to shed light on the nature of the bandedge states. In particular, we show how the structure of derived wavefunctions leads to specific dominant momentum and spin scattering mechanisms for both valence …
The experimental exfoliation of layered group-IV monochalcogenides --semiconductors isostructural to black phosphorus-- using processes similar to those followed in the production of graphene or phosphorene has turned out unsuccessful thus far, as if the chemical degradation observed in black phosphorus was aggravated in these monochalcogenides. Here, we document a facile dissociation of water by these materials within ten nanoseconds from room-temperature Car-Parrinello molecular dynamics calculations under standard temperature and pressure conditions. These results suggest that humidity must…
Existence of van der Waals gaps renders two-dimensional (2D) materials ideal passages of lithium for being used as anode materials. However, the requirement of good conductivity significantly limits the choice of 2D candidates. So far only graphite is satisfying due to its relatively high conductivity. Recently, a new polymorph of layered germanium selenide (Gamma-GeSe) was proven to be semimetal in its bulk phase with a higher conductivity than graphite while its monolayer behaves semiconducting. In this work, by using first-principles calculations, we examined the possibility of using this n…
Low-symmetry 2D materials---such as ReS$_2$ and ReSe$_2$ monolayers, black phosphorus monolayers, group-IV monochalcogenide monolayers, borophene, among others---have more complex atomistic structures than the honeycomb lattices of graphene, hexagonal boron nitride, and transition metal dichalcogenides. The reduced symmetries of these emerging materials give rise to inhomogeneous electron, optical, valley, and spin responses, as well as entirely new properties such as ferroelasticity, ferroelectricity, magnetism, spin-wave phenomena, large nonlinear optical properties, photogalvanic effects, a…
The ability to switch between distinct states of polarization comprises the defining property of ferroelectrics. However, the microscopic mechanism responsible for switching is not well understood and theoretical estimates based on coherent monodomain switching typically overestimate experimentally determined coercive fields by orders of magnitude. In this work we present a detailed first principles characterization of domain walls (DWs) in two-dimensional ferroelectric GeS, GeSe, SnS and SnSe. In particular, we calculate the formation energies and migration barriers for 180 and 90 DWs, and th…
Recently, monolayer SnS, a two-dimensional group IV monochalcogenide, was grown on a mica substrate at the micrometer-size scale by the simple physical vapor deposition (PVD), resulting in the successful demonstration of its in-plane room temperature ferroelectricity. However, the reason behind the monolayer growth remains unclear because it had been considered that the SnS growth inevitably results in a multilayer thickness due to the strong interlayer interaction arising from lone pair electrons. Here, we investigate the PVD growth of monolayer SnS from two different feed powders, highly pur…
The intriguing properties, especially Dirac physics in graphene, have inspired the pursuit of two-dimensional materials in honeycomb structure. Here we achieved a monolayer transition metal monochalcogenide AgTe on Ag(111) by tellurization of the substrate. High-resolution scanning tunneling microscopy, combined with low-energy electron diffraction, angle-resolved photoemission spectroscopy, and density functional theory calculations, demonstrates the planar honeycomb structure of AgTe. The first principle calculations further reveal that, protected by the in-plane mirror reflection symmetry, …
Pyroelectricity is a very promising phenomenon in three- and two-dimensional (2D) materials, but first-principles calculations have not so far been used to elucidate the underlying mechanisms. Here we report density-functional theory (DFT) calculations based on the Born-Szigeti theory of pyroelectricity, by combining fundamental thermodynamics and the modern theory of polarization. We find satisfactory agreement with experimental data in the case of bulk benchmark materials, showing that the so-called electron-phonon renormalization, whose contribution has been viewed as negligible, is importa…
We report charged exciton (trion) formation dynamics in doped monolayer transition metal dichalcogenides (TMDs), specifically molybdenum diselenide (MoSe2), using resonant two-color pump-probe spectroscopy. When resonantly pumping the exciton transition, trions are generated on a picosecond timescale through exciton-electron interaction. As the pump energy is tuned from the high energy to low energy side of the inhomogeneously broadened exciton resonance, the trion formation time increases by ~ 50%. This feature can be explained by the existence of both localized and delocalized excitons in a …
The dynamics of exciton formation in transition metal dichalcogenides is difficult to measure experimentally, since many momentum-indirect exciton states are not accessible to optical interband spectroscopy. Here, we combine a tuneable pump, high-harmonic probe laser source with a 3D momentum imaging technique to map photoemitted electrons from monolayer WS$_2$. This provides momentum-, energy- and time-resolved access to excited states on an ultrafast timescale. The high temporal resolution of the setup allows us to trace the early-stage exciton dynamics on its intrinsic timescale and observe…
Using an updated simulation tool, we examine molecular junctions comprised of benzene-1,4-dithiolate bonded between gold nanotips, focusing on the importance of environmental factors and inter-electrode distance on the formation and structure of bridged molecules. We investigate the complex relationship between monolayer density and tip separation, finding that the formation of multi-molecule junctions is favored at low monolayer density, while single-molecule junctions are favored at high density. We demonstrate that tip geometry and monolayer interactions, two factors that are often neglecte…
Novel 2D material CrI3 reveals unique combination of 2D ferromagnetism and robust excitonic response. We demonstrate that the possibility of the formation of magnetic topological defects, such as Neel skyrmions, together with large excitonic Zeeman splitting, leads to giant scattering asymmetry, which is the necessary prerequisite for the excitonic anomalous Hall effect. In addition, the diamagnetic effect breaks the inversion symmetry, and in certain cases can result in exciton localization on the skyrmion. This enables the formation of magnetoexcitonic quantum dots with tunable parameters.
Recent experiment demonstrated the formation of free-standing Au monolayers by exposing Au-Ag alloy to electron beam irradiation. Inspired by this discovery, we used semi-empirical effective medium theory simulations to investigate monolayer formation in 30 different binary metal alloys composed of late d-series metals Ni, Cu, Pd, Ag, Pt, and Au. In qualitative agreement with the experiment, we find that the beam energy required to dealloy Ag atoms from Au-Ag alloy is smaller than the energy required to break the dealloyed Au monolayer. Our simulations suggest that similar method could also be…
The concept of ferrovalley materials has been proposed very recently. The existence of spontaneous valley polarization, resulting from ferromagnetism, in such hexagonal two-dimensional materials makes nonvolatile valleytronic applications realizable. Here, we introduce a new member of ferrovalley family with orthorhombic lattice, i.e. monolayer group-IV monochalcogenides (GIVMs), in which the intrinsic valley polarization originates from ferroelectricity, instead of ferromagnetism. Combining the group theory analysis and first-principles calculations, we demonstrate that, different from the va…
We derive and validate a quantitative analytical model of the near-field electrostatic effects in the vicinity (>=3Å) of two-dimensional (2D) materials. In solving the Poisson equation of a near-planar point charge ansatz for the electronic density of a 2D material, our formula quantitatively captures the out-of-plane decay and the in-plane modulation of density functional theory (DFT)-calculated potentials. We provide a method for quickly constructing the electronic density ansatz, and apply it to the case of hexagonal monolayers (BN, AlN, GaN) and monochalcogenides (GeS, GeSe, GeTe, SnS, SnS…
We demonstrated doping in 2D monolayer graphene via local electrical stressing. The doping, confirmed by the resistance-voltage transfer characteristics of the graphene system, is observed to continuously tunable from N-type to P-type as the electrical stressing level (voltage) increases. Two major physical mechanisms are proposed to interpret the observed phenomena: modifications of surface chemistry for N-type doping (at low-level stressing) and thermally-activated charge transfer from graphene to SiO2 substrate for P-type doping (at high-level stressing). The formation of P-N junction on 2D…
Photoluminescence (PL) of transition metal dichalcogenide (TMD) monolayers is strongly influenced by the dielectric environment. The defect states present in the substrate induces uncontrollable doping in the TMD monolayer and thereby modifies the PL spectra. There have been enormous efforts to tune and overcome the effect of inevitable subtract defects in PL spectra, but a proper understanding and a convenient way are still lacking. Here, we systematically studied the effect of surface defects by gradually increasing the separation between WS2 monolayer and substrate. Hence, we could precisel…
We examine a mechanism by which excitons are generated via the LO (longitudinal optical) phonon-assisted scattering process after optical excitation of monolayer transition metal dichalcogenides. The exciton formation time is computed as a function of the exciton center-of-mass wavevector, electron and hole temperatures, and carrier densities for known values of the Fröhlich coupling constant, LO phonon energy, lattice temperature, and the exciton binding energy in layered structures. For the monolayer MoS$_2$, we obtain ultrafast exciton formation times on the sub-picosecond time scale at cha…
When graphene is close to charge neutrality, its energy landscape is highly inhomogeneous, forming a sea of electron-like and hole-like puddles, which determine the properties of graphene at low carrier density. However, the details of the puddle formation have remained elusive. We demonstrate numerically that in sharp contrast to monolayer graphene, the normalized autocorrelation function for the puddle landscape in bilayer graphene depends only on the distance between the graphene and the source of the long-ranged impurity potential. By comparing with available experimental data, we find qua…
Density functional theory (DFT) is widely used to study defects in monolayer graphene with a view to applications ranging from water filtration to electronics to investigation of radiation damage in graphite moderators. To assess the accuracy of DFT in such applications, we report diffusion quantum Monte Carlo (DMC) calculations of the formation energies of some common and important point defects in monolayer graphene: monovacancies, Stone-Wales defects, and silicon substitutions. We find that standard DFT methods underestimate monovacancy formation energies by around 1 eV. The disagreement be…
We present a comprehensive theory of the magnetic phases in monolayer nickel-based Janus dihalides (NiIBr, NiICl, NiBrCl) through a combination of first-principles calculations and atomistic simulations. Phonon band structure calculations and finite temperature molecular dynamics simulations show that Ni-dihalide Janus monolayers are stable. The parameters of the interacting spin Hamiltonian extracted from ab initio calculations show that nickel-dihalide Janus monolayers exhibit varying degrees of magnetic frustration together with a large Dzyaloshinskii-Moriya interaction due to their inheren…
Chemical Vapor Deposition (CVD) of graphene on copper is one of the most efficient technologies for producing high quality graphene for large areas. Nevertheless, still high pressures and big quantities of precursor gas are currently required. The objective of this work is to deposit graphene using the monolayer-formation-time concept (t) from the kinetic theory of gases, which leads to an economization of the precursor gas, a minimization of the process pressure and the time needed to grow a graphene monolayer. Our process has been designed taking into account the dependence of t on the press…
This communication reports the surface pressure vs. area per molecule isotherm and Fluorescence Imaging Microscopic studies of the formation of domain structure in the mixed Langmuir monolayer of RhB and Stearic acid (SA) at the air water interface. Strong repulsive interaction between the unlike components leads to the phase separation and formation of microcrystalline domains at the air water interface of the Langmuir monolayer. These domain can be directly visualized using fluorescence imaging microscope.
Recently, a number of new two-dimensional (2D) materials based on puckered phosphorene and arsenene have been predicted with moderate band gaps, good absorption properties and carrier mobilities superior to transition metal dichalcogenides. For heterojunction applications, it is important to know the relative band alignment of these new 2D materials. We report the band alignment of puckered CaP$_3$, CaAs$_3$ and BaAs$_3$ monolayers at the quasiparticle level of theory (G$_0$W$_0$), calculating band offsets for isolated monolayers according to the electron affinity rule. Our calculations sugges…
While new species and properties of two-dimensional (2D) materials are being reported with extraordinary regularity, a significant bottleneck in the field is the ability to controllably process material into working devices. We report a chemical vapor deposition process to selectively grow 2D material in a deterministic manner around lithographically defined bulk metallic patterns which concurrently provide as-grown contacts to the material. Monolayer films, with lateral extent of up to hundreds of microns are controllably grown on and around patterned regions of transition metals. By using di…
Boron (B) sheet has been intently studied and various candidates with vacancies have been proposed by theoretical investigations, including the possible growth on metal surface. However, a recent experiment (Science 350, 1513, 2015) reported that the sheet formed on the Ag(111) surface was a buckled triangular lattice without vacancy. Our calculations combined with High-Throughput screening and the first-principles method demonstrate a novel growth mechanism of boron sheet from clusters, ribbons, to monolayers, where the B-Ag interaction is dominant in the nucleation of boron nanostructures. W…
Many of the fundamental optical and electronic properties of atomically thin transition metal dichalcogenides are dominated by strong Coulomb interactions between electrons and holes, forming tightly bound atom-like excitons. Here, we directly trace the ultrafast formation of excitons by monitoring the absolute densities of bound and unbound electron-hole pairs in monolayers of WSe$_2$ following femtosecond non-resonant optical excitation. To this end, phase-locked mid-infrared probe pulses and field-sensitive electro-optic sampling are used to map out the full complex-valued optical conductiv…
The maximum pressure a two-dimensional surfactant monolayer is able to withstand is limited by the collapse instability towards formation of three-dimensional material. We propose a new description for reversible collapse based on a mathematical analogy between the formation of folds in surfactant monolayers and the formation of Griffith Cracks in solid plates under stress. The description, which is tested in a combined microscopy and rheology study of the collapse of a single-phase Langmuir monolayer of 2-hydroxy-tetracosanoic acid (2-OH TCA), provides a connection between the in-plane rheolo…
We report the formation of sub-5 nm ultrashallow junctions in 4 inch Si wafers enabled by the molecular monolayer doping of phosphorous and boron atoms and the use of conventional spike annealing. The junctions are characterized by secondary ion mass spectrometry and non-contact sheet resistance measurements. It is found that the majority (~70%) of the incorporated dopants are electrically active, therefore, enabling a low sheet resistance for a given dopant areal dose. The wafer-scale uniformity is investigated and found to be limited by the temperature homogeneity of the spike anneal tool us…
Vacancy-Driven Electronic Reconstruction in Monolayer PtSe$_2$: Formation Thermodynamics and Charge States
School of Physics and Astronomy, Beijing Normal University（北京师范大学物理与天文学院）；Key Laboratory of Multiscale Spin Physics (Beijing Normal University), Ministry of Education（教育部多尺度自旋物理重点实验室（北京师范大学））；College of Science, Liaoning Petrochemical University（辽宁石油化工大学理学院）
Single photon emitters (SPEs) in hexagonal boron nitride (hBN) are promising candidates for quantum light generation. Despite this, techniques to control the formation of hBN SPEs down to the monolayer limit are yet to be demonstrated. Recent experimental and theoretical investigations have suggested that the visible wavelength single photon emitters in hBN originate from carbon-related defects. Here we demonstrate a simple strategy for controlling SPE creation during the chemical vapor deposition growth of monolayer hBN via regulating surface carbon concentration. By increasing surface carbon…
Recent simulations have studied the formation of patterns in a binary mixture of immiscible surfactants absorbed onto the surface of a spherical nanoparticle. The resulting patterns (Janus, spots and stripes) were in good agreement with experimental results. We perform dissipative particle dynamics (DPD) simulations to study the patterns obtained by adding a third surfactant to the monolayer as a guide towards increasing the richness and diversity of patchy particles synthesized this way. We predict a variety of new patterns that can be produced through different combinations of simple design …
Common substitutional isovalent semiconductor alloys usually form disordered metastable phases with positive excess formation enthalpies (ΔH). In contrast, monolayer alloys of transition metal dichalcogenides (TMDs) MX2 (M = Mo, W; X = S, Se) always have negative ΔH, suggesting atomic ordering, which is, however, not yet experimentally observed. Using first-principles calculations, we find that the negative ΔH of cation-mixed TMD alloys results from the charge transfer from weak Mo-X to nearest strong W-X bonds and the negative ΔH of anion-mixed TMD alloys comes from the larger energy gain due…
Experimental observations of heteroepitaxial growth of Ge on Si(001) show a (2xn) reconstruction for sub-monolayer coverages, with dimer rows crossed by missing-dimer trenches. We present first-principles density-functional calculations designed to elucidate the energetics and relaxed geometries associated with this reconstruction. We also address the problem of how the formation energies of reconstructions having different stoichiometries should be compared. The calculations reveal a strong dependence of the formation energy of the missing-dimer trenches on spacing n, and demonstrate that thi…
