Single-atom metal alloy catalysts (SAACs) have recently become a very active new frontier in catalysis research. The simultaneous optimization of both facile dissociation of reactants and a balanced strength of intermediates' binding make them highly efficient and selective for many industrially important reactions. However, discovery of new SAACs is hindered by the lack of fast yet reliable prediction of the catalytic properties of the sheer number of candidate materials. In this work, we address this problem by applying a compressed-sensing data-analytics approach parameterized with density-functional inputs. Our approach is faster and more accurate than the current state-of-the-art linear relationships. Besides consistently predicting high efficiency of the experimentally studied Pd/Cu, Pt/Cu, Pd/Ag, Pt/Au, Pd/Au, Pt/Ni, Au/Ru, and Ni/Zn SAACs (the first metal is the dispersed component), we identify more than two hundred yet unreported candidates. Some of these new candidates are predicted to exhibit even higher stability and efficiency than the reported ones. Our study demonstrates the importance of breaking linear relationships to avoid bias in catalysis design, as well as provides a recipe for selecting best candidate materials from hundreds of thousands of transition-metal SAACs for various applications.
Optimization of High Entropy Alloy Catalyst for Ammonia Decomposition and Ammonia Synthesis
高熵合金(HEA)纳米颗粒的成功合成是材料科学长期追求的目标,它开辟了材料科学的新前沿,在催化、电子、结构合金和含能材料方面具有应用。最近,由地球上丰富的元素制成的Co25 Mo 45 Fe 10 Ni 10 Cu 10 HEA显示出对氨分解具有高催化活性,其可与现有技术的钌催化剂相媲美,但昂贵得令人望而却步。使用基于第一性原理计算的计算方法,结合数据分析和机器学习,我们建立了一个模型来快速计算H,N和NHX(x= 1,3)物种在不同合金成分和原子排列的CoMoFeNiCu合金表面上的吸附能。我们表明,25/45钴/钼的比例确定实验上作为最活跃的氨分解组合物增加的可能性,表面吸附氮相当于钌,而在同一时间相互作用的中间体适度强烈。我们的研究强调了计算建模和机器学习在其近乎无限的材料设计空间中识别和优化HEA合金的重要性。
Nanoporous AuPt and AuPtAg alloy co-catalysts formed by dewetting-dealloying on ordered TiO2 nanotube surface lead to significantly enhanced photocatalytic H2 generation
Magnetically collected platinum/nickel alloy nanoparticles -- insight into low noble metal content catalysts for hydrogen evolution reaction
析氢反应(HER)是电化学分解水的关键过程。为了降低该过程的成本和环境影响,开发具有低含量或不含贵金属的电催化剂是非常有动机的。在这里,我们报告了一种新颖的和巧妙的合成混合PtxNi1-x电催化剂的形式的纳米粒子的项链结构命名为nanotrusses,具有非常低的贵金属含量。纳米桁架结构具有重要的特征,例如良好的导电性、高表面积、强的互连和基底粘附性,这使得具有优异的HER活性。具体而言,表现最好的Pt0.05Ni0.95样品在0.5 M H2SO4中的塔菲尔斜率为30 mV dec-1,在10 mA cm-2的电流密度下的过电位为20 mV,具有高稳定性。令人印象深刻的催化性能在理论研究中得到了进一步的合理化,该理论研究深入了解了这种小铂含量如何使氢的吸附能接近最佳的机制。
Activating Basal Planes in Transition Metal Dichalcogenides for CO2 Reduction to CO through Alloying
Institute of Materials Science & Engineering, Washington University in St. Louis(华盛顿大学圣路易斯分校材料科学与工程研究所);Department of Computer Science & Engineering, Washington University in St. Louis(华盛顿大学圣路易斯分校计算机科学与工程系);Department of Mechanical Engineering & Materials Science, Washington University in St. Louis(华盛顿大学圣路易斯分校机械工程与材料科学系);Department of Chemistry, Incheon National University(仁川国立大学化学系)
Multi-Task Mixture Density Graph Neural Networks for Predicting Cu-based Single-Atom Alloy Catalysts for CO2 Reduction Reaction
Tsinghua University(清华大学);Tsinghua-Berkeley Shenzhen Institute(清华-伯克利深圳学院);Tsinghua Shenzhen International Graduate School(清华大学深圳国际研究生院);Shenzhen Geim Graphene Center(深圳盖姆石墨烯中心);The Chinese University of Hong Kong(香港中文大学);Tencent(腾讯);Zhejiang University(浙江大学);Zhejiang Lab(之江实验室)
Lowering the Exponential Wall: Accelerating High-Entropy Alloy Catalysts Screening using Local Surface Energy Descriptors from Neural Network Potentials
Pd/Cu single atom alloys for catalysis: from single crystalline to nanostructured model systems for highly selective butanol dehydrogenation
Christian-Albrechts-University Kiel(基尔大学);Lund University(隆德大学);Universitat de Barcelona(巴塞罗那大学);ICREA (Institució Catalana de Recerca i Estudis Avançats)(加泰罗尼亚研究高级学院);Kiel Nano, Surface and Interface Science(基尔纳米、表面与界面科学)
Artificial Intelligence-Enabled Holistic Design of Catalysts Tailored for Semiconducting Carbon Nanotube Growth
Peking University(北京大学);National Center for Nanoscience and Technology(国家纳米科学中心);Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences(中国科学院上海微系统与信息技术研究所);Suzhou Laboratory(苏州实验室)
Low temperature synthesis of heterostructures of transition metal dichalcogenide alloys (WxMo1-xS2) and graphene with superior catalytic performance for hydrogen evolution
通过湿化学路线,然后在低温(300 $^\circ$ C)下热处理,获得通过交替石墨烯和过渡金属二硫属化物(TMD)合金形成的垂直异质结构的大面积($\sim$ cm $^2$)膜。特别地,我们合成了堆叠的石墨烯和用作析氢催化剂的W $_x$ Mo $_{1-x}$ S $_2$合金相。当异质结构合金在300 $^o$ ℃退火时,我们观察到38.7 mV dec $^{-1}$和96 mV起始电位(在10 mA cm $^{-2}$的电流密度下)的塔菲尔斜率。这些结果表明,由石墨烯和W $_{0.4}$ Mo $_{0.6}$ S $_2$合金形成的异质结构比WS $_2$和MoS $_2$有效至少两倍,并且优于任何其他报道的TMD系统。这种策略提供了一种廉价且低温的合成替代方案,能够在析氢反应(HER)中取代Pt。此外,合金的催化活性随时间稳定,即催化活性即使在1000次循环后也不经历显著变化。使用密度泛函理论计算,我们发现,这种增强的析氢在W $_x$ Mo $_{1-x}$ S $_2$合金中主要是由于较低的能量势垒产生的d-轨道的过渡金属和H $_2$的s-轨道的有利的重叠,与最低的能量势垒发生W $_{0.4}$ Mo $_{0.6}$ S $_2$合金。因此,除了先前报道的产生点缺陷、空位和边缘的策略之外,现在还可以通过金属合金化进一步改善“惰性”TMD基面的性能。在相…
Transition States Energies from Machine Learning: An Application to Reverse Water-Gas Shift on Single-Atom Alloys
Center for Interstellar Catalysis, Department of Physics and Astronomy, Aarhus University(星际催化中心,物理天文系,奥胡斯大学);Aarhus Institute of Advanced Studies, Aarhus University(奥胡斯先进研究所,奥胡斯大学)
Structures of iron and cobalt bimetallic clusters for optimized chemical vapor deposition growth of single-walled carbon nanotubes
The University of Tokyo(东京大学);Center for Multidimensional Carbon Materials (CMCM), Institute for Basic Science (IBS)(基础科学研究院多维碳材料中心);Dalian University of Technology(大连理工大学);University of Antwerp(安特卫普大学)
Machine Learning-based estimation and explainable artificial intelligence-supported interpretation of the critical temperature from magnetic ab initio Heusler alloys data
First principles and Monte Carlo studies of adsorption and desorption properties from Pd$\rm_{1-x}$Ag$\rm_{x}$ surface alloy
Pd $\rm_{1-x}$ Ag $\rm_{x}$($\rm{x}=$ 0.25,0.50,0.75)合金的FCC结构被认为是本研究中的燃料电池组件。我们已经研究了它作为燃料电池组件的质量,看看它是否可以作为Pt催化剂的替代品。用密度泛函理论研究了H和CO与表面的相互作用,用动力学Monte Carlo~(KMC)研究了H和CO从表面的脱附。采用GPAW程序,在平面波基组$\&$中,采用PBE交换相关处理,计算了Pd $\rm_{1-x}$ Ag $\rm_{x}$合金的体弹性模量和平衡晶体结构.晶格常数的最佳值的系统得到的总能量计算与晶格细胞体积拟合稳定的jeldom模型。计算了Pd $\rm_{1-x}$ Ag $\rm_{x}$合金的表面能、结合能和结合能,分析了合金结构的稳定性。能带结构计算揭示了这些合金的电子和光学性质。态密度~(DOS)和投影态密度~(PDOS)表明了本征态的有效性。脱附过程中进行了研究,在阿克里纽斯型脱附速率$\&$的温度程序。考虑了吸附分子间的横向相互作用对一级脱附(分子吸附)$\&$二级脱附的影响。用密度泛函理论计算了H和CO在Pd $\rm_3$ Ag~(111)上的吸附能。结果显示与文献的定性一致。
AtomAgents: Alloy design and discovery through physics-aware multi-modal multi-agent artificial intelligence
Massachusetts Institute of Technology(麻省理工学院);Center for Computational Science and Engineering(计算科学与工程中心);Schwarzman College of Computing(计算学院(施瓦曼计算学院))