The pseudo-analog wireless video transmission technology can improve the effectiveness, reliability, and robustness of the conventional digital system in video broadcast scenarios. Although some prototypes of IEEE 802.11 series have been developed for researchers to do simulations and experiments, they are usually expensive and provide very limited access to the physical layer. More importantly, these prototypes cannot be used to verify the correctness of the new proposed pseudo-analog wireless video transmission algorithms directly due to limited modulation modes they can support. In this paper, we present a novel design of software radio platform (SDR)-based pseudo-analog wireless video transceiver which is completely transparent and allows users to learn all the implementation details. Firstly, we prove that the analog method can also achieve the optimal performance as the digital method from the perspective of the rate-distortion theory. Then, we describe the two hardware implementation difficulties existed in the designing process including the data format modification and the non-linear distortion. Next, we introduce the implementation details of the designed transceiver. Finally, we analyze the performance of the designed transceiver. Specifically, the results show that the designed system can work effectively in both simulations and experiments.
As new use cases are emerging for unmanned aerial systems (UAS), advanced wireless communications technologies and systems need to be implemented and widely tested. This requires a flexible platform for development, deployment, testing and demonstration of wireless systems with ground and aerial nodes, enabling effective 3D mobile communications and networking. In this paper, we provide a comparative overview of software-defined radios (SDRs), with a specific focus on SDR hardware and software that can be used for aerial wireless experimentation and research. We discuss SDR hardware requiremen…
In this paper, secure wireless information and power transfer with intelligent reflecting surface (IRS) is proposed for a multiple-input single-output (MISO) system. Under the secrecy rate (SR) and the reflecting phase shifts of IRS constraints, the secure transmit beamforming at access point (AP) and phase shifts at IRS are jointly optimized to maximize the harvested power of energy harvesting receiver (EHR). Due to the non-convexity of optimization problem and coupled optimization variables, firstly, we convert the optimization problem into a semidefinite relaxation (SDR) problem and a sub-o…
The increase of cyberattacks using IoT devices has exposed the vulnerabilities in the infrastructures that make up the IoT and have shown how small devices can affect networks and services functioning. This paper presents a review of the vulnerabilities of the wireless technologies that bear the IoT and assessing the experiences in implementing wireless attacks targeting the Internet of Things using Software-Defined Radio (SDR) technologies. A systematic literature review was conducted. The types of vulnerabilities and attacks that can affect the wireless technologies that stand the IoT ecosys…
The Cloud radio access network (C-RAN) offers a revolutionary approach to cellular network deployment, management and evolution. Advances in software-defined radio (SDR) and networking technology, moreover, enable delivering software-defined everything through the Cloud. Resources will be pooled and dynamically allocated leveraging abstraction, virtualization, and consolidation techniques; processes will be automated using common application programming interfaces; and network functions and services will be programmatically provided through an orchestrator. OOCRAN, oocran.dynu.com, is a softwa…
This Innovative Practice Full Paper presents our methodology and tools for introducing competition in the electrical engineering curriculum to accelerate education and innovation in wireless communications. Software radio or software-defined radio (SDR) enables wireless technology, systems and standards education where the student acts as the radio developer or engineer. This is still a huge endeavor because of the complexity of current wireless systems and the diverse student backgrounds. We suggest creating a competition among student teams to potentiate creativity while leveraging the SDR d…
With explosive growth of the mobile Internet access and the popularization of wireless local area network (WLAN) access points (APs), wireless fidelity (WiFi) offloading is considered as an important supplementary technique to reduce the load of cellular infrastructure and enhance quality of network service. In this paper, we design and implement the framework of LTEWiFi aggregation (LWA) which is in line with the 3rd Generation Partnership Project (3GPP) released standard recently. In the LWA system, the process of data offloading is different from that of WiFi interworking on the cellular co…
In this paper we present our approach regarding the implementation of new wireless radio receiver exploiting filterbank techniques, using a software-development driven approach. Since most of the common radio communications systems share a similar structure, this can be exploited creating a framework which provides a generic layout and tools to construct a reconfigurable transmitter and/or receiver. By combining the use of the Universal Software Radio Peripheral version 2 (USRP2) with a generic object-oriented framework of our own built on top of the GNU Radio software framework, we have been …
Software-defined radios (SDRs) are often used in the experimental evaluation of next-generation wireless technologies. While crowd-sourced spectrum monitoring is an important component of future spectrum-agile technologies, there is no clear way to test it in the real world, i.e., with hundreds of users each with an SDR in their pocket participating in RF experiments controlled by, and data uploaded to, the cloud. Current fully functional SDRs are bulky, with components connected via wires, and last at most hours on a single battery charge. To address the needs of such experiments, we design a…
We study radio-frequency (RF) wireless power transfer (WPT) using a digital radio transmitter for applications where alternative analog transmit circuits are impractical. An important paramter for assessing the viability of an RF WPT system is its end-to-end efficiency. In this regard, we present a prototype test-bed comprising a software-defined radio (SDR) transmitter and an energy harvesting receiver with a low resistive load; employing an SDR makes our research meaningful for simultaneous wireless information and power transfer (SWIPT). We analyze the effect of clipping and non-linear ampl…
In this study, we propose a low-cost and portable millimeter-wave software-defined radio (SDR) for wireless experimentation in the 60 GHz band. The proposed SDR uses Xilinx RFSoC2x2 and Sivers EVK06002 homodyne transceiver and provides a TCP/IP-based interface for companion computer (CC)-based baseband signal processing. To address the large difference between the processing speed of the CC and the sample rate of analog-to-digital converters, we propose a method, called waveform-triggered reception (WTR), where a hard-coded block detects a special trigger waveform to acquire a pre-determined n…
Full-duplex (FD) wireless can significantly enhance spectrum efficiency but requires tremendous amount of self-interference (SI) cancellation. Recent advances in the RFIC community enabled wideband RF SI cancellation (SIC) in integrated circuits (ICs) via frequency-domain equalization (FDE), where RF filters channelize the SI signal path. Unlike other FD implementations, that mostly rely on delay lines, FDE-based cancellers can be realized in small-form-factor devices. However, the fundamental limits and higher layer challenges associated with these cancellers were not explored yet. Therefore,…
The aim of this paper is to present an implementation of a functional IEEE 802.15.7 real-time testbed based on the Software Defined Radio (SDR) concept. This implementation is built with low cost commercial off-the-shelf (COTS) analog devices and the use of Universal Software Radio Peripheral version 2 (USRP2) equipment combined with a generic object-oriented framework that takes advantage of several open source software libraries. The prototype is validated in a controlled laboratory environment with an over-the-air measurement campaign.
This Innovative Practice Full Paper introduces a novel tool for educating electrical engineering students about hardware impairments in wireless communications. A radio frequency (RF) front end is an essential part of a wireless transmitter or receiver. It features analog processing components and data converters which are driven by today's digital communication systems. Advancements in computing and software-defined radio (SDR) technology have enabled shaping waveforms in software and using experimental and easily accessible plug-and-play RF front ends for education, research and development.…
In order to support experimentation with full-duplex (FD) wireless, we recently integrated an open-access FD transceiver in the ORBIT testbed. In this report, we present the design and implementation of the FD transceiver and interfaces, and provide examples and guidelines for experimentation. In particular, an ORBIT node with a National Instruments (NI)/Ettus Research Universal Software Radio Peripheral (USRP) N210 software-defined radio (SDR) was equipped with the Columbia FlexICoN Gen-1 customized RF self-interference (SI) canceller box. The RF canceller box includes an RF SI canceller that…
Wireless all-analog biosensor design for concurrent microfluidic and physiological signal monitoring is presented in this work. The key component is an all-analog circuit capable of compressing two analog sources into one analog signal by Analog Joint Source-Channel Coding (AJSCC). Two circuit designs are discussed, including the stacked-Voltage Controlled Voltage Source (VCVS) design with the fixed number of levels, and an improved design, which supports a flexible number of AJSCC levels. Experimental results are presented on the wireless biosensor prototype, composed of Printed Circuit Board…
Adaptive modulation and coding (AMC) is widely employed in modern wireless communication systems to improve the transmission efficiency by adjusting the transmission rate according to the channel conditions. Thus, AMC can provide very efficient use of channel resources especially over fading channels. Quadrature Amplitude Modulation (QAM) is an ef- ficient and widely employed digital modulation technique. It typically employs a rectangular signal constellation. Therefore the decision regions of the constellation are square partitions of the two-dimensional signal space. However, it is well kno…
To enable low-power and low-complexity wireless monitoring, an improved circuit design of Analog Joint Source Channel Coding (AJSCC) is proposed for wireless sensor nodes. This innovative design is based on Analog Divider Blocks (ADB) with tunable spacing between AJSCC levels. The ADB controls the switching between two types of Voltage Controlled Voltage Sources (VCVS). LTSpice simulations were performed to evaluate the performance of the circuit, and the power consumption and circuit complexity of this new ADB-based design were compared with our previous parallel-VCVS design. It is found that…
Reconfigurable intelligent surface (RIS) has recently emerged as a promising candidate to improve the energy and spectral efficiency of wireless communication systems. However, the unit modulus constraint on the phase shift of reflecting elements makes the design of optimal passive beamforming solution a challenging issue. The conventional approach is to find a suboptimal solution using the semi-definite relaxation (SDR) technique, yet the resultant suboptimal iterative algorithm usually incurs high complexity, hence is not amenable for real-time implementation. Motivated by this, we propose a…
The signal recovery performance of the rectangular-type Analog Joint Source-Channel Coding (AJSCC) is analyzed in this work for high and medium/low Signal-to-Noise Ratio (SNR) scenarios in the wireless sensing systems. The analysis and derivations of the medium/low SNR scenario are based on the comprehensive listing of all the signal variation cases in the three-dimensional signal mapping curve of the rectangular-type AJSCC. Theoretical formulations of Mean Square Error (MSE) performance are derived for both analog sensing and digital sensing systems with rectangular-type AJSCC. Evaluation res…
The design of sensors or "things" as part of the new Internet of Underwater Things (IoUTs) paradigm comes with multiple challenges including limited battery capacity, not polluting the water body, and the ability to track continuously phenomena with high temporal/spatial variability. We claim that traditional digital sensors are incapable to meet these demands because of their high power consumption, high complexity (cost), and the use of non-biodegradable materials. To address the above challenges, we propose a novel architecture consisting of a sensing substrate of dense analog biodegradable…
This letter considers the secure communication in a reconfigurable intelligent surface (RIS) aided full duplex (FD) system. An FD base station (BS) serves an uplink (UL) user and a downlink (DL) user simultaneously over the same time-frequency dimension assisted by a RIS in the presence of an eavesdropper. In addition, the artificial noise (AN) is also applied to interfere the eavesdropper's channel. We aim to maximize the sum secrecy rate of UL and DL users by jointly optimizing the transmit beamforming, receive beamforming and AN covariance matrix at the BS, and passive beamforming at the RI…
The fourth-generation Wireless Technology (4G) has been adopted by all major operators in the world and has already ruled the cellular landscape for around a decade. A lot of researches and new technologies are being considered as potential elements contributing to the next generation wireless communication (5G). The lack of realistic and flexible experimentation platforms for collecting real communication data has limited and slowed the landing of new approaches. Software Defined Radio (SDR) can provide flexible, upgradable, and long lifetime radio equipment for the wireless communications in…
The explosive demands for high quality mobile video services have caused heavy overload to the existing cellular networks. Although the small cell has been proposed to alleviate such a problem, the network operators may not be interested in deploying numerous base stations (BSs) due to expensive infrastructure construction and maintenance. The unmanned aerial vehicles (UAVs) can provide the low-cost and quick deployment, which can support high-quality line-of-sight communications and have become promising mobile BSs. In this paper, we propose a quality-of-experience (QoE)-driven UAV-enabled ps…
Intelligent reflecting surface (IRS) is an emerging technology for wireless communication composed of a large number of low-cost passive devices with reconfigurable parameters, which can reflect signals with a certain phase shift and is capable of building programmable communication environment. In this paper, to avoid the high hardware cost and energy consumption in spatial modulation (SM), an IRS-aided hybrid secure SM (SSM) system with a hybrid precoder is proposed. To improve the security performance, we formulate an optimization problem to maximize the secrecy rate (SR) by jointly optimiz…
College of Electronic and Information Engineering, Shenzhen University（深圳大学电子与信息工程学院）
The proliferation of Internet-of-Things (IoT) devices and cloud-computing applications over siloed data centers is motivating renewed interest in the collaborative training of a shared model by multiple individual clients via federated learning (FL). To improve the communication efficiency of FL implementations in wireless systems, recent works have proposed compression and dimension reduction mechanisms, along with digital and analog transmission schemes that account for channel noise, fading, and interference. The prior art has mainly focused on star topologies consisting of distributed clie…
The research challenge of current Wireless Sensor Networks (WSNs) is to design energy-efficient, low-cost, high-accuracy, self-healing, and scalable systems for applications such as environmental monitoring. Traditional WSNs consist of low density, power-hungry digital motes that are expensive and cannot remain functional for long periods on a single power charge. In order to address these challenges, a dumb-sensing and smart-processing architecture that splits sensing and computation capabilities is proposed. Sensing is exclusively the responsibility of analog substrate---consisting of low-po…
Numerous researchers have studied innovations in future sixth-generation (6G) wireless communications. Indeed, a critical issue that has emerged is to contend with society's insatiable demand for high data rates and massive 6G connectivity. Some scholars consider one innovation to be a breakthrough--the application of free-space optical (FSO) communication. Owing to its exceedingly high carrier frequency/bandwidth and the potential of the unlicensed spectrum domain, FSO communication provides an excellent opportunity to develop ultrafast data links that can be applied in a variety of 6G applic…
Most of the indoor coverage issues arise from network deployments that are usually planned for outdoor scenarios. Moreover, the ever-growing number of devices with different Radio Access Technologies (RATs), expected for new 5G scenarios and to maintain compatibility with older cellular standards (mostly 3G/4G), worsen this situation thus calling for novel bandwidth-efficient, low-latency and cost-effective solutions for indoor coverage. To solve this problem, Centralized Radio Access Network (C-RAN) architectures have been proposed to provide dense and controlled coverage inside buildings. Ho…
