The research challenge of current Wireless Sensor Networks (WSNs) is to design energy-efficient, low-cost, high-accuracy, self-healing, and scalable systems for applications such as environmental monitoring. Traditional WSNs consist of low density, power-hungry digital motes that are expensive and cannot remain functional for long periods on a single power charge. In order to address these challenges, a dumb-sensing and smart-processing architecture that splits sensing and computation capabilities is proposed. Sensing is exclusively the responsibility of analog substrate---consisting of low-power, low-cost all-analog sensors---that sits beneath the traditional WSN comprising of digital nodes, which does all the processing of the sensor data received from analog sensors. A low-power and low-cost solution for substrate sensors has been proposed using Analog Joint Source Channel Coding (AJSCC) realized via the characteristics of Metal Oxide Semiconductor Field Effect Transistor (MOSFET). Digital nodes (receiver) also estimate the source distribution at the analog sensors (transmitter) using machine learning techniques so as to find the optimal parameters of AJSCC that are communicated back to the analog sensors to adapt their sensing resolution as per the application needs. The proposed techniques have been validated via simulations from MATLAB and LTSpice to show promising performance and indeed prove that our framework can support large scale high density and persistent WSN deployment.
Electromagnetic Twin: From Sparse Measurements to Persistent Wireless Intelligence
South China University of Technology（华南理工大学）；Electric Power Research Institute, China Southern Power Grid（中国南方电网电力科学研究院）；Guangdong Provincial Key Laboratory of Power System Network Security（广东省电力系统网络安全重点实验室）；Southern University of Science and Technology（南方科技大学）；Technical University of Berlin（柏林工业大学）；Queen Mary University of London（伦敦大学玛丽女王学院）；Khalifa University（哈利法大学）；West Virginia University（西弗吉尼亚大学）
The design of sensors or "things" as part of the new Internet of Underwater Things (IoUTs) paradigm comes with multiple challenges including limited battery capacity, not polluting the water body, and the ability to track continuously phenomena with high temporal/spatial variability. We claim that traditional digital sensors are incapable to meet these demands because of their high power consumption, high complexity (cost), and the use of non-biodegradable materials. To address the above challenges, we propose a novel architecture consisting of a sensing substrate of dense analog biodegradable…
To enable low-power and low-complexity wireless monitoring, an improved circuit design of Analog Joint Source Channel Coding (AJSCC) is proposed for wireless sensor nodes. This innovative design is based on Analog Divider Blocks (ADB) with tunable spacing between AJSCC levels. The ADB controls the switching between two types of Voltage Controlled Voltage Sources (VCVS). LTSpice simulations were performed to evaluate the performance of the circuit, and the power consumption and circuit complexity of this new ADB-based design were compared with our previous parallel-VCVS design. It is found that…
Most of the indoor coverage issues arise from network deployments that are usually planned for outdoor scenarios. Moreover, the ever-growing number of devices with different Radio Access Technologies (RATs), expected for new 5G scenarios and to maintain compatibility with older cellular standards (mostly 3G/4G), worsen this situation thus calling for novel bandwidth-efficient, low-latency and cost-effective solutions for indoor coverage. To solve this problem, Centralized Radio Access Network (C-RAN) architectures have been proposed to provide dense and controlled coverage inside buildings. Ho…
Wireless all-analog biosensor design for concurrent microfluidic and physiological signal monitoring is presented in this work. The key component is an all-analog circuit capable of compressing two analog sources into one analog signal by Analog Joint Source-Channel Coding (AJSCC). Two circuit designs are discussed, including the stacked-Voltage Controlled Voltage Source (VCVS) design with the fixed number of levels, and an improved design, which supports a flexible number of AJSCC levels. Experimental results are presented on the wireless biosensor prototype, composed of Printed Circuit Board…
The signal recovery performance of the rectangular-type Analog Joint Source-Channel Coding (AJSCC) is analyzed in this work for high and medium/low Signal-to-Noise Ratio (SNR) scenarios in the wireless sensing systems. The analysis and derivations of the medium/low SNR scenario are based on the comprehensive listing of all the signal variation cases in the three-dimensional signal mapping curve of the rectangular-type AJSCC. Theoretical formulations of Mean Square Error (MSE) performance are derived for both analog sensing and digital sensing systems with rectangular-type AJSCC. Evaluation res…
Detecting the presence of a random wireless source with minimum latency utilizing an array of radio sensors is considered. The problem is studied under the constraint that the analog-to-digital conversion at each sensor is restricted to reading the sign of the analog received signal. We formulate the resulting digital signal processing task as a sequential hypothesis test in simple form. To circumvent the intractable probabilistic model of the multivariate binary array data, a reduced model representation within the exponential family in conjunction with a log-likelihood ratio approximation is…
The pseudo-analog wireless video transmission technology can improve the effectiveness, reliability, and robustness of the conventional digital system in video broadcast scenarios. Although some prototypes of IEEE 802.11 series have been developed for researchers to do simulations and experiments, they are usually expensive and provide very limited access to the physical layer. More importantly, these prototypes cannot be used to verify the correctness of the new proposed pseudo-analog wireless video transmission algorithms directly due to limited modulation modes they can support. In this pap…
College of Electronic and Information Engineering, Shenzhen University（深圳大学电子与信息工程学院）
The proliferation of Internet-of-Things (IoT) devices and cloud-computing applications over siloed data centers is motivating renewed interest in the collaborative training of a shared model by multiple individual clients via federated learning (FL). To improve the communication efficiency of FL implementations in wireless systems, recent works have proposed compression and dimension reduction mechanisms, along with digital and analog transmission schemes that account for channel noise, fading, and interference. The prior art has mainly focused on star topologies consisting of distributed clie…
A low-power wearable wireless sensor measuring both molecular biomarkers and physiological signals is proposed, where the former are measured by a microfluidic biosensing system while the latter are measured electrically. The low-power consumption of the sensor is achieved by an all-analog circuit implementing Analog Joint Source-Channel Coding (AJSCC) compression. The sensor is applicable to a wide range of biomedical applications that require real-time concurrent molecular biomarker and physiological signal monitoring.
A low-complexity all-analog circuit is proposed to perform efficiently Analog Joint Source Channel Coding (AJSCC), which can compress two or more sensor signals into one with controlled distortion while also being robust against wireless channel impairments. The idea is to realize the rectangular-type AJSCC using Voltage Controlled Voltage Sources (VCVS). The proposal is verified by Spice simulations as well as breadboard and Printed Circuit Board (PCB) implementations. Results indicate that the design is feasible for low-complexity systems like persistent wireless sensor networks requiring lo…
With the advent of the 5G wireless networks, achieving tens of gigabits per second throughputs and low, milliseconds, latency has become a reality. This level of performance will fuel numerous real-time applications, such as autonomy and augmented reality, where the computationally heavy tasks can be performed in the cloud. The increase in the bandwidth along with the use of dense constellations places a significant burden on the speed and accuracy of analog-to-digital converters (ADC). A popular approach to create wideband ADCs is utilizing multiple channels each operating at a lower speed in…
The explosive demands for high quality mobile video services have caused heavy overload to the existing cellular networks. Although the small cell has been proposed to alleviate such a problem, the network operators may not be interested in deploying numerous base stations (BSs) due to expensive infrastructure construction and maintenance. The unmanned aerial vehicles (UAVs) can provide the low-cost and quick deployment, which can support high-quality line-of-sight communications and have become promising mobile BSs. In this paper, we propose a quality-of-experience (QoE)-driven UAV-enabled ps…
Future millimeter-wave (mmWave) systems, 5G cellular or WiFi, must rely on highly directional links to overcome severe pathloss in these frequency bands. Establishing such links requires the mutual discovery of the transmitter and the receiver %in the angular domain potentially leading to a large latency and high energy consumption. In this work, we show that both the discovery latency and energy consumption can be significantly reduced by using fully digital front-ends. In fact, we establish that by reducing the resolution of the fully-digital front-ends we can achieve lower energy consumptio…
This paper proposes a novel scheme for mitigating strong interferences, which is applicable to various wireless scenarios, including full-duplex wireless communications and uncoordinated heterogenous networks. As strong interferences can saturate the receiver's analog-to-digital converters (ADC), they need to be mitigated both before and after the ADCs, i.e., via hybrid processing. The key idea of the proposed scheme, namely the Hybrid Interference Mitigation using Analog Prewhitening (HIMAP), is to insert an M-input M-output analog phase shifter network (PSN) between the receive antennas and …
Communication range in passive Radio-Frequency Identification (RFID) front-end devices is a critical barrier in the real-world implementation of this low-cost technology. Purely passive RFID tags power up by harvesting the limited RF energy transmitted by the interrogator, and communicate by backscattering the incident signal. This mode of communication keeps manufacturing costs below a few cents per tag, but the limited power available at the tag undermines long-range deployment. In this paper, we present an approach to use Photovoltaics (PV) to augment the available energy at the tag to impr…
Unmanned aerial vehicles (UAVs) can help facilitate cost-effective and flexible service provisioning in future smart cities. Nevertheless, UAV applications generally suffer severe flight time limitations due to constrained onboard battery capacity, causing a necessity of frequent battery recharging or replacement when performing persistent missions. Utilizing wireless mobile chargers, such as vehicles with wireless charging equipment for on-demand self-recharging has been envisioned as a promising solution to address this issue. In this article, we present a comprehensive study of \underline{v…
In conventional secure precise wireless transmission (SPWT), fully digital beamforming (FDB) has a high secrecy performance in transmit antenna system, but results in a huge RF-chain circuit budget for medium-scale and large-scale systems. To reduce the complexity, this letter considers a hybrid digital and analog (HDA) structure with random frequency mapped into the RF-chains to achieve SPWT. Then, a hybrid SPWT scheme based on maximizing signal-to-leakage-and-noise ratio (SLNR) and artificial-noise-to-leakage-and-noise ratio (ANLNR) (M-SLNR-ANLNR) is proposed. Compared to the FDB scheme, the…
By reconfiguring the propagation environment of electromagnetic waves artificially, reconfigurable intelligent surfaces (RISs) have been regarded as a promising and revolutionary hardware technology to improve the energy and spectrum efficiency of wireless networks. In this paper, we study a RIS aided multiuser multiple-input single-output (MISO) wireless power transfer (WPT) system, where the transmitter is equipped with a constant-envelope analog beamformer. We formulate a novel problem to maximize the total received power of all the users by jointly optimizing the beamformer at transmitter …
In this work, we investigate differential chaos shift keying (DCSK), a communication-based waveform, in the context of wireless power transfer (WPT). Particularly, we present a DCSK-based WPT architecture, that employs an analog correlator at the receiver in order to boost the energy harvesting (EH) performance. By taking into account the nonlinearities of the EH process, we derive closed-form analytical expressions for the peak-to-average-power-ratio of the received signal as well as the harvested power. Nontrivial design insights are provided, where it is shown how the parameters of the tran…
This paper presents a self-contained factorization for the delay Vandermonde matrix (DVM), which is the super class of the discrete Fourier transform, using sparse and companion matrices. An efficient DVM algorithm is proposed to reduce the complexity of radio-frequency (RF) $N$-beam analog beamforming systems. There exist applications for wideband multi-beam beamformers in wireless communication networks such as 5G/6G systems, system capacity can be improved by exploiting the improvement of the signal to noise ratio (SNR) using coherent summation of propagating waves based on their directions…
